Hi!
First of all plz excuse my bad english
I´m looking for a WM "tool" that spreads SMS
It should work as follows:
I recieve a SMS; the tool checks, if the user who sent the message is signed in my "spreading list"; if yes --> send the same message to all other users in my list (except the user who sent the original message)
If no such tool exists, or if it is not possible to code such a tool, i would be happy if you could tell me an online service wich makes this possible (must work in austria)
thanks for your help!
(THIS IS NOT meant for spam or advertisement !!!)
I have a solution for you.
Hi,
Try Magic call from Mobiion (http://www.mobiion.com/) it's your exact solution and i guess the only one.
I have tried to make it work exactly as you requested and it worked great.
Unfortunately i spent about 25 SMS while testing because i made a mistake by make it send an SMS to my number when it receives an SMS from my number too, so it went in an un-ending loop sending and receiving SMS. So don't make the same mistake.
If you found it unfamiliar and had difficulties configuring it just let me know to give you a hand.
Have fun
Fady Tabar
Related
I have upgraded to LVSW Windows Mobile 6 and satisfied with its performance. But the same SMS problem is still here.
When i get SMS and reply it using its REPLY option then following message appears:-
Your SMS cant be sent.
Your call barring settings are enabled.
But when i go to my contacts, select the name and then send him msg, SMS goes very fine without any error.
I did not had this problem with built in ROM at the time of purchase in TYTN. Its quite irritating as i communicate alot on SMS. I know there are alot of genuis people around, so any solution will be appreciated.
Reliance.
reliance said:
I have upgraded to LVSW Windows Mobile 6 and satisfied with its performance. But the same SMS problem is still here.
When i get SMS and reply it using its REPLY option then following message appears:-
Your SMS cant be sent.
Your call barring settings are enabled.
But when i go to my contacts, select the name and then send him msg, SMS goes very fine without any error.
I did not had this problem with built in ROM at the time of purchase in TYTN. Its quite irritating as i communicate alot on SMS. I know there are alot of genuis people around, so any solution will be appreciated.
Reliance.
Click to expand...
Click to collapse
just a warning, your question will not be answered as you created a new thread. you should have posted this in the LVSW ROm thread.
sorry i did it in hurry. i take it to right place.
hello there, I have some stuff I'd like to change regarding SMS. I've got a P3300 with official WM6.
I'd prefer to change this through some options (tho I didn't find) or registry edit. If possible to do what I need without installing more (battery draining) applications, would be best, but if there is no other choice, I'll take a look at whatever application u suggest.
- when I am underground and I send an SMS, it tells me it can't be send, and the message goes into the temp. folder (dunno english name of this folder) and I have to resend it manually. I'd like it to resend automatically as soon as I have signal again. That's what my previous nokia phones did.
- when I send a SMS successfully, I get a popup and "ding" telling me it was send. I don't want this, I only want to know if there was an error. I send loads of messages, and this popup is rather annoying.
- since I have WM6, when i open messages through the today plugin, it always asks me if outlook, sms or mms... with wm5 it always went into the last one I used. I'd like this functionality back, is it possible?
is there any FAQ of different kind of tweaks that can be done with a P3300 wm6 just through options or registry? if yes, could you please link it, I'd like to take a look at that.
thx for everything
zandadoum said:
- when I am underground and I send an SMS, it tells me it can't be send, and the message goes into the temp. folder (dunno english name of this folder) and I have to resend it manually. I'd like it to resend automatically as soon as I have signal again. That's what my previous nokia phones did.
Click to expand...
Click to collapse
sorry, no idea on this.
zandadoum said:
- when I send a SMS successfully, I get a popup and "ding" telling me it was send. I don't want this, I only want to know if there was an error. I send loads of messages, and this popup is rather annoying.
Click to expand...
Click to collapse
There is a tweak for this. Search and you will find it or else, i will try to find it 4 you this weekend.
zandadoum said:
- since I have WM6, when i open messages through the today plugin, it always asks me if outlook, sms or mms... with wm5 it always went into the last one I used. I'd like this functionality back, is it possible?
Click to expand...
Click to collapse
Yes, this question has been answered be4 too. Search and you will find it or else, i will try to find it 4 you this weekend. I thought its possible...
hopefully you can find that info and give me a hand. i tried the forum search function but as i dont know exactly what i am looking for, my search is too generic and i get loads of results (most about tweaked roms) that don't help me at all.
EDIT: found answer to 3) by myself. SOLUTION: open messages, go into menu->tools->options and there you can setup the different types of message accounts you have. at the bottom is an option to enable or disable the account selector. i just turned that off.
For the SMS sent notification:
HKEY_LOCAL_MACHINE/Software/Microsoft/Inbox/Settings/SMSNoSentMsg and set it to "1".
With the mentioned registry edit, you are not notified if the message fails to send. It just tries it, and puts it in sent items. If it fails it will not be re-send again by WM6.
you can fix the SMS/OUTLOOK/MMS thing in Options in your Messaging program.
ok, thx to that registry edit i get the sms sent popup no more. but i don't get any popup warning if it fails.
i've heard something about a different regedit key, with different numbers like
0 = no warn
1 = all warns
2 = only bla bla bla warn
3 = only ble ble ble warn
etc.
any1 got an idea about this?
also, any way to have the phone re-send failed sms automaticaly when i have signal again?
i am at a point that i would also try some SOFTWARE if needed, tho i prefer if it can be done just by registry.
Not familiar with those options. But why don't you give it a try and report back here.
GL
i must say this is very annoying , not the message but the situation itself , why the message cannot be sent why? there is reception and all ..
idodekel said:
i must say this is very annoying , not the message but the situation itself , why the message cannot be sent why? there is reception and all ..
Click to expand...
Click to collapse
I've noticed on my phone that if I happen to be sending a message at the same time I'm receiving one, my outgoing message usually fails. I'm not sure why this is though.
i agree , i think there is a bug hidden in this issue..
i have many good things to say on my deviice but there has to be a good reson or solution for this , to bad HTC are not recieving our complains and check this
I had always assumed it was a carrier issue. Disconnecting and reconnecting the radio always has fixed the issue for me.
may i asked how u do that ?
my solution is softreset...
is that happen with the TF messeging ?
or the Win messeging ?
casue it happened with me in the TF thread mode
and i stoped sending from that interface till a solution come up
now i send from our old good Win messege with no problem what so even
itdid happen with in the touch flow mode ,
i will try the old known and good wm mode in order to send message , and i will keep you updated.
For me it has something to do with the numbers saved in the phone. I got them all in +49 (0xxx) 1234567 format. When calling someone the phone automatically ereases the 0 and dials +49xxx1234567 - when sending messages the 0 remains in the number and I get the error. I can erease the 0 by hand and then the message is send. After that i can reply to that person using winmo messaging without ereasing the 0...
Partial solution perhaps
Mad Marc said:
For me it has something to do with the numbers saved in the phone. I got them all in +49 (0xxx) 1234567 format. When calling someone the phone automatically ereases the 0 and dials +49xxx1234567 - when sending messages the 0 remains in the number and I get the error. I can erease the 0 by hand and then the message is send. After that i can reply to that person using winmo messaging without ereasing the 0...
Click to expand...
Click to collapse
Hi Marc.
Don´t know if it´s the same problem but there´s an official fix that sound´s about right here:
http://www.htc.com/europe/SupportDownload.aspx?p_id=250&cat=0&dl_id=625
For some obscure reason the explaining text is in french on that site, whereas everything else is in english.
Be advised however that this fix is dated july 30. 09.
There´s a ROM-upgrade dated August 8. 09. Now i can´t be absolutely sure but if I was employed in HTC maintanance, i´d include old patches in the ROM-upgrade. Your post states your ROM version to be 1.14.111.2 and the new German version is 1.19.407.1 so you might be able to solve the issue with a ROM upgrade.
I haven´t upgraded my self. Even though there´s a Danish one provided as well. I´m waiting for the stock WinMo6,5 rom. Installing bought software, contacts, backup and everything feels like too much trouble when we´re going to have to do the whole shebang all over again in a fortnight or so.
In any case the German rom can be found here:
http://www.htc.com/europe/SupportDownload.aspx?p_id=250&cat=2&dl_id=629
Regards
ELO
samarrai said:
is that happen with the TF messeging ?
or the Win messeging ?
casue it happened with me in the TF thread mode
and i stoped sending from that interface till a solution come up
now i send from our old good Win messege with no problem what so even
Click to expand...
Click to collapse
I've also had this occur on the TP1 and the Titan, where I was using the Windows default app.
Polar67 said:
Don´t know if it´s the same problem but there´s an official fix that sound´s about right here:
Click to expand...
Click to collapse
Thanks Elo, just tried it. Seems to work only on Unbranded TP2. Mine is a T-mobile Vario V, I get an error "Incorrect Device".
I will wait for WiMo6.5 as well, I guess it will be included there. And T-mobile will provide a free update for their MDAs.
what's worse - while that error message is sat in the background, until i click it i cant receive any incoming messages (actually looks like i loose them). it cost me a fortune using it abroad, this bug! what's even worse - the tp2 rom provided by mpd is an older version to what this patch fixes, hence incorrect device. waiting for htc reply
idodekel said:
i must say this is very annoying , not the message but the situation itself , why the message cannot be sent why? there is reception and all ..
Click to expand...
Click to collapse
Do you happen to use PIM backup?
no i am not using ,
i am sure this is a bug, i use now the windows mobile messaging module and its flawless.
HTC YOU HAVE A BUG!!!
(please fix it )
Hi, tried to search for this, I need some help please.
Using WM6.1 stock euro ROM.
1. When I reply to a text by tapping it it comes up as a thread conversation with that contact I received the text from.
2. I write my text and hit send.
3. Sometimes it works but a lot of the time the message is not sent.
Sometimes it says "Your message could not be sent" but sometimes nothing.
4. Check all messages > draft and there it is but the phone number of the recipient is changed from 07XX XXX XXX to 447XX XXX XXX and not with the plus sign
5. I double check the contact info and it is saved as 07XX, I tried saving it as 00447XX and +447XX but no luck.
So please has anyone come across this bug in the software or could it be operator related?
Sorry if the post is confusing I don't know how to explain this properly.
Cheers
Hi,
I had the same problem with my stock 6.1 rom (I've just changed to official 6.5, but not teste though).
Don't know why it doesn't work ... to send texts I'm just using the winmo text thing (access by the keyboard) and it works perfectly ...
Thanks for the reply, yes I have had to use that way around it as well. I really would like it to work tho, have no problem with this sending to International numbers from the UK. It only happens when sending to UK numbers while in the UK.
Hi folks,
hopefully someone can help me.
For a long time now, I'm looking for an app which can send and recieve short messages (not SMS!!) from an on your PC. A simular App would be Chrome to Phone but not only for links but messages in general as well as the ability to recieve messages from your phone on your PC.
For Example, I want to use it for the following situations:
- you want to (quickly) share a link you have found on your PC with your Whatsapp mates.
- you have recieved a link / name or just something on your phone and want to google it on your PC
- you want to call a number which is displayed on you PC
Does any of you guys knwos an app or a solution for this case? I know that Android Lost uses a message service called message popup. Hoever it isn't really intuitive for this kind of usage.
Maybe someone has an idea...
Big Thanks
Hilola