Develop Bugs

WM6 - GMail: cannot send replied email - was fine in WM5

Hi all,
I have LVSW WM6 and I can create NEW email and send it using Pocket Outlook. However, if I want to send an email via "reply", I kept on getting a message that says:
The message could not be sent. Check that you have network coverage and that you account information is correct. Then try sending again.
I have good 3G coverage and can browse the Internet via PIE or Netfront. I have enabled POP in my GMail account.
Is there a particular POP setting that I must configure in WM6 for sending replied email via GMail?

Kinda funny, i had no problem until a couple days ago, with my gmail accounts, to send messages. Not exactly same problem, but the message is the same. My WM6 is Black 2.5.

hknoener said:
Kinda funny, i had no problem until a couple days ago, with my gmail accounts, to send messages. Not exactly same problem, but the message is the same. My WM6 is Black 2.5.
Click to expand...
Click to collapse
Couple days ago? Did you made any changes to the device before this happened?
I wonder if this is caused by GMail and have nothing to do with WM6...

hknoener said:
Kinda funny, i had no problem until a couple days ago, with my gmail accounts, to send messages. Not exactly same problem, but the message is the same. My WM6 is Black 2.5.
Click to expand...
Click to collapse
I had the same problem, and the solution i found is the following:
When you press the reply button you find: "Edit the sender's message" underlined.
click on it and the original sender's message will open fully
Now you can write your reply and send it well

Thanks a lot pasil.pt it seems to be the solution!!!

I had very same issue. Using gmail on Treo800/winmo 6.1, I get a message that refuses to send. Once stuck in outbox, nothing will send unless I remove it. Every time this happened I saved the offensive msg and now I have 7 of them. When I retry send any, each one fails. These are the facts for my case:
1) It happens on some messages.
2) Happens when replying or forwarding.
3) If I delete the content, the msg sends fine. At least, I can rule out problems with msg properties and header.
One thing I noticed when comparing native PO to FlexMail, is FM defaults to indenting the original msg using '>' character. PO does not. Since FM can send all these 7 msgs fine, I thought this should be good start to investigate.
So I grabbed one of the bad msgs and I indented it manually line by line and to my surprise, It sent successfully. I repeated this with each of the 7 msgs and all sent just fine.
PO does not have a UI control to toggle the 'indentbody' and 'indent character' features, but I did see there are some registry keys related. However, I could not get these keys to work.
HKCU/sofware/microsoft/inbox/settings
--> AddLeading
--> IndentBody
--> LeadChar
I can not get my changes to stick and not sure how to enter a 'dword' value for the above.
Can someone please help me find out...
- steps in changing above values and make them effective
- how to enable body indenting, make e.g. '>' the leading char using dword values.
I could not find a tweak tool to do this as well.
Any assistance will be highly appreciated.

Same issue. Very frustrating. After reading last, i tried deleting the original text (below but not including the header) and the message sent fine.

Yout text message cannot be sent

Hello!
I decided to post here because I have a problem sending text messages with my HD.
Every third time, when I want to reply an SMS, it cannot be sent, it returns in the drafts, and I have this error message.
I don't understand why.
I tried dozen of Roms, radio, or SMS application (Manila, Windows, SMS Chat), and this happened.
Thanks for the help.

well, what rom you usin now my friend?

check yours sms center number in phone settings undee "voice mail and text messages"
if blank ask your operator to give it to you.

I just tried a new one to test if there is the issue, I'm on the last Lost in Asia.
Still the same problem.
[EDIT] SMS Center number checked, and it's okay. But I don't think this is the problem according I can send messages most of the time.

I solved the problem. In Settings / Connexions / Advanced Connexion, SMS Service is now set to GSM only.

having the same problem. its so frustrating i swear. plz do help

nisar1 said:
having the same problem. its so frustrating i swear. plz do help
Click to expand...
Click to collapse
I have the same problem, however I find that the sms's are actually sent because the other party has informed me.

I have this problem as well. I have WWE latest official ROM and SMS service set to GSM only. But as vanaveer said, other party received message even if it´s showing that "message cannot be sent"...

I think I solved the problem! Wich is indeed very frustating. The problem is in the SIM card, if the SIM card is older it does not really switch wel between the gsm.hsdpa network, which results in time out erros when sending text messages over the hsdpa network. If you put the settings of the network to GSM only, it will work flawless. I will receive a new SIM card by my provider and then the problem will be solved all together.
please report back wether this was helpfull or not

Well, I don't know if this is a 'Solution', but it's working for me.
I also have the same problem STILL! But I got it working, just
by instead of replying to the text message, I deny to make a
reply, and just start a new text message. This way I am able
to 'reply' on the text message.
Anyway, it's a good temporarily solution (for me surely), until
someone finds out what the actual problem is
I hope this will work for you!
grts,
slot

i have a similar prob.
when one particular friend text's me it comes through with his name, as it should be. but if i try to reply from his text i get the "message cannot be sent" error.
if i then go into my contacts and text him it's all good.
the problem is that when i recieve a text from him the "+" symbol is omitted from the beginning of his number. but the symbol is there in my contacts list and as i stated the text comes up as from him.
i don't geddit??

I have the same problem. I get an error but people receive my SMS. I even asked for a new SIM... same problem. Tested many ROMs and Radios... no luck.
I've given up. Now I'm looking for a way to disable the "Your text message cannot be sent" message because it blocks my other incoming SMSs until I click OK.
My guess is it is operator related.

Text Messaging Problems

Anyone else have problems with text messaging?
Scenario: I receive a text message, the notification pops up on screen. I have my phone handy, so i hit the reply button.
The phone takes me to Windows Mobile text messaging. I send my text message reply. If the same person texts me back, it is not registered as being read.
So i exit the screen back to the TouchFlo 3d menu. I have a new text message (that i have already seen and read)
So i go to the windows mobile text system to read it...again.
NOW, lets say i have a full conversation with someone. 30 messages later, I still have 30 unread messages, every time i open the windows mobile text messanger, it removes ONE new message, not all.
So, i never get to use the TouchFlo 3d messenger, which is half decent, and the WM6.1 text messenger is stupid.
Does anyone know of a setting, or a third party text program that will over ride this crap, or am i just hoping this all works out.

Am i really the only one who has text messaging difficulties?

kamitsuna said:
Am i really the only one who has text messaging difficulties?
Click to expand...
Click to collapse
this is a known issue my friend...
download SafeInBoxExtender... search the main forum...
it will let you "mark all messages as read" ..
it will cure your problem right up..

*nods* i have it already, it doesnt exactly "cure" the problem, UGH!
We shouldnt have to come up with stupid fixes for stuff microsoft should already have fixed.
Is 6.5 slated to fix some of this garbage?

I have another problem
i cant use the TF messaging
allot of times it tells me message not sent
and if not there is no delivery report
i found out the there is a TF delivery report i must check 1st
but its not fixed !!!
when i go out of the message it becoms unchecked !!
So at the end i used the Win messaging with no problems there
but i wish i can just click the incoming message and reply right away

hmm how odd, i don't have either of those issues.
Which version of the TP2 are you guys using?

karandras24 said:
hmm how odd, i don't have either of those issues.
Which version of the TP2 are you guys using?
Click to expand...
Click to collapse
U mean u reply on sms from the TF thread mode with no problems and u receive a delivery report ???
without having to use the Win messaging mode ?
why me then?
hope any one can help me
my Rom version is 1.19.415.1
dated 06/12/09

im using the sprint TP2

Another partial fix here...Partial because Ive only using the new dll for a bout a week(not sure of long temr effects) & I cant make a successful backup using sprite backup etc without adding the dll files to the exclude list of files to backup.

im not quite sure i understand what you just said.

Help please, sms problem in thread mode!

Hi, tried to search for this, I need some help please.
Using WM6.1 stock euro ROM.
1. When I reply to a text by tapping it it comes up as a thread conversation with that contact I received the text from.
2. I write my text and hit send.
3. Sometimes it works but a lot of the time the message is not sent.
Sometimes it says "Your message could not be sent" but sometimes nothing.
4. Check all messages > draft and there it is but the phone number of the recipient is changed from 07XX XXX XXX to 447XX XXX XXX and not with the plus sign
5. I double check the contact info and it is saved as 07XX, I tried saving it as 00447XX and +447XX but no luck.
So please has anyone come across this bug in the software or could it be operator related?
Sorry if the post is confusing I don't know how to explain this properly.
Cheers

Hi,
I had the same problem with my stock 6.1 rom (I've just changed to official 6.5, but not teste though).
Don't know why it doesn't work ... to send texts I'm just using the winmo text thing (access by the keyboard) and it works perfectly ...

Thanks for the reply, yes I have had to use that way around it as well. I really would like it to work tho, have no problem with this sending to International numbers from the UK. It only happens when sending to UK numbers while in the UK.

Your text message cannot be sent.

I tried to sent a text message and, after a slight delay, got the following:
Your text message cannot be sent.
Click to expand...
Click to collapse
Is there some sort of app or registry setting that I could change that'd ask if I wanted to resend the message? Having to retype in messages is rather annoying.
According to this post Windows Mobile 6.1 added this feature but I don't see it and I'm running 6.5. Maybe the HTC TouchFlo 3D interface removed it?

yawnmoth said:
I tried to sent a text message and, after a slight delay, got the following:
Is there some sort of app or registry setting that I could change that'd ask if I wanted to resend the message? Having to retype in messages is rather annoying.
According to this post Windows Mobile 6.1 added this feature but I don't see it and I'm running 6.5. Maybe the HTC TouchFlo 3D interface removed it?
Click to expand...
Click to collapse
It doesn't retain a copy of the message in your drafts folder, or outbox...? Whenever I get that message I can just pull it up from there and hit send again

Whenever I get this message, after trying to resend it a few times, I realize I tried sending a text to an email address.

Make sure the number has an area code as part of the number.
Just another possible solution.

Is it for all text messages? If its a specific number sometimes the persons number is disconnected

torint said:
Is it for all text messages? If its a specific number sometimes the persons number is disconnected
Click to expand...
Click to collapse
this is the correct answer...if you have a good signal and you get that error msg, then that person has not paid their billy bill...

This problem comes up quite often if you've flashed a different radio onto your device. If you have flashed a custom radio, try out another or stock. If that's not the case, you might be in a poor coverage area. Both are common culprits, but may not apply for you.

SMS doest go to outbox folder
I have the same problem
When I have no service coverage I would like to type sms messages and as soon as I get it make phone send them all out. But unfortunately, when I don't have service HTC touch pro 2 keeps trying to send sms out and after a couple of attempts gives me message that it was not able to send it. I have to click on each message and resend it when I have service. Instead, I want my phone to put all sms into outbox sms folder and send them all when I actually have service.
I know other phones perform this function well. I went thru all settings but couldn't get it to put sms into outbox when no service available.
Does anyone have fix for that?

Also having a similar problem
Hi all,
Same, or similar thing with me. I'm on Vodafone in the UK, and I've got a friend who is on '3' in the UK. If I text him with a new fresh message, and hit send, it goes to him no problems. If he replies and I attempt to reply back - then I get "Your message could not be sent. Try again?" underlined in red. Tapping on this just generates the same problem again and again.
I've tried his number with/without spaces in it, ensured his contact name has no non-alpha characters in it, tried his number in +447xxx format as well as 07xxxx - all to no avail.
It does not happen with any other contact in my phonebook and I end up having to let the message fail, then forwarding my reply to him, so it leaves my device as a new message.
Now, as it's the UK, its nothing to do with him having not paid his bill (we don't get charged to receive SMS in the UK), and I've got great signal (I work for a Vodafone associated company and we've got a cell on-site, so it's full signal of HSUPA for me).
I am completely at a loss to understand why this happens - I have other friends on '3' that SMS's go to fine, so I'm guessing it's not a Vodafone to '3' issue either.
Any ideas anyone?!
Adam C.
PS: Stock ROM running WM6.5, unlocked GSM, nothing odd about the configuration/software either!

...bump.
Anyone?
Thx,
a.

change your network setting for automatic to manual. and enable call waiting now your problem is solved. i was suffering from the same problem but now solved