I recently bought a T-mobile MDA PRO. which has Imate Jas JAR ROM on it. My Phone gave me an initialproblem ,
The problem is when i dial my number the phone rings once, twice, thrice and on the fourth ring my phone ringer tune starts playing this is weird cos after 6 rings the phone goes to voice mail.
So i upgraded my Rom with the latest rom upgrade :
Rom version : 1.30.76.wwe
Rom date : 02/20/06
Radio version : 1.09.00
Ext Rom version : 1.30.164.wwe
Inspite of a rom upgrade i still face the problem the phone rings rings and rings but my T-mobile Doesnt RING ( play the ringer tune ). I changed the ringer tune towindows default . same thing. i dunno wots happening here. Someone pls help. cos of this i cant hear the ringer tune and the calls go to Voice mail
I just a missed important business call so pls help
My phone wont ring though, BIZARRE, this is not to do with the rom though as i think it was happening with schaps, really really strange.
Any ideas, I just get a phone icon where the signal strength bar is showing handset. No callerid flashing up, not even an option to accept the incoming call. I go to phone options and test the ring tone and it plays just fine.
maybe i should reflash the radio, on 1.50 at the mo which i recently flashed to downgrade from 1.51, any ideas?
maybe i miss something totally obvious.
bumppppp? anyone?
same happening to mine on ultra ultra lite re-furbished
i had to flash another rom, then it worked. when i flashed back to same rom it didnt work again. the problem started after i added some cabs and did my regular tweaks. even with the fresh install of the same rom after flashing another rom it still didnt work.. i even changed radios
i'm on ultra lite, and it seems nice. So you saying i should flash another rom then come back to ultra lite?
Ok,
I just reflashed schaps, then flashed ultra lite.
I STILL have this wierd problem, what's going on?
Is my fone knackered? Not much good if it don't ring!
the rom has been discontinued and he is fixing it
known bug.....wait until new relase
shame it's a nice ROM, nice un' quick. fixed yet ?
same here..
I noticed that no sound was coming out of the phone when i did a soft reset and the Schap's Rom boot up with the animation + sound didnt sound. Also my speaker phone does not work. Basically and audible sound does not work!!!! i tried flashing it with dutty's rom, still same problem.. any ideas?
Hope this helps in resolving this issue!
Hi. I've run into this issue myself too. Here's my environment:
Cooked ROM via Pandora's Kitchen 7.1 with 3.61 OS
Using Dutty's Touch Dialer (2G) option in BuildOS
Everything was fine with the ringer for a whole week. I then decided to be a bit adventurous and went to look for a 3g dialer because the Touch one is only 2G. I then settled for Schen's 3G dialer 2.0 and followed his instructions in installing it (install OEMSign2007cert.cab first, then the dialer, which was the one with the dialer directory option). I didn't install any colored background cabs as provided by his package.
When I tested the dialer (outgoing portion), it seemed fine. I couldn't test the 3G option because we don't have 3G here yet. The problem began when I received my first call.
I was able to hear the incoming call beep through my BT headset, but that was the only indicator of an incoming call, in addition to the phone icon above the signal meter in the top bar signifying an incoming phone call. Besides that, there were no other indicator such as a pop-up window showing incoming caller's info, phone ringing, or even the vibrate function. I have my phone set to vibrate and ring with the Ringer-Vision.wma as the default ring tone.
I tested the vibrate and ring setting in the phone configuration panel and both the vibration function and ring tone worked. I tried several configurations such as vibrate only, ring only, etc, in addition to other various ring tones of different format (wma, mid, wav). All resulted in success in the phone configuration panel, but in failure when an incoming call came in.
To test the phone function, I used a land line, a cellular line, and SkypeOut. All three resulted in the same failure observed above.
Given that the only thing changed after that week was the 3G dialer, I proceeded to remove it and reboot. It reverted back to the Touch 2G dialer. When the phone rebooted, I retried the above tests and all resulted in the pop-up dialog with incoming caller information (plus the two softkey functions), vibration function, and the proper ringtone.
With the above results, would it help you guys in further diagnosing and fixing this problem? We are slated to have 3G within the next few months and I would like to be able to use this function.
Thanks!
Edit update: One other thing is that I tested the above both with and without my BT headset on.
Quakie
I do understand what you are talking about how you tested out the ringers in the phone options menu.. but for me any type of sound does not work, i ran tests there no sound, speaker phone does not work, MP3 do not sound. The sound only works through a head set. And when im on a call i could hear the other person and vise versa. So the problem is the speaker just went out after a couple of days of having Schap's rom. I tired flashing another rom a couple of days after. No luck. Any ideas?
-thanks
Hello everybody,
I have a smal BIG things that make me hurry.
Since I upgraded to the official WM6 ROM, I can not any more put my personal rings into Phone profiles for the ring field. I only have the 3 standard rings (that are fu... ugly)
What is strange is that I can find my personal SMS rings in the SMS ring !!!
I made soft reset, I canceled file, re installed it, put my rings on the roots of "windows file". Nothing is working.
Somebody has a tip for my problem.
I can not leave without profiles
Today upgraded my kaiser 130 to wm6.1. dutys hybrid v2. Nice stuff.
And so got a head ache, that was't on wm6.
Now it is posible to silence the ringing phone without rejecting a calll, but if you use any software like ringomobile or similar, this feature does not work, because ringo don't caches that button, it just plays his own sounds. While windows phone sounds are muted from begining.
So question would be, is there any update or something that allows asign ringtones for gruops of users , and simutaneously to have silence function workin?
my qtek 9000 ROM version 2.07.00 WWE Radio version 1.18.00 suddenly is silent during incoming calls. All other notifications work correctly only incoming calls are silent. I cannot even change the ring tone. Keeps returning to telephone original ring tone but stays silent.
HELP telephone which doesnt ring is pretty useless
Backup... Flash...
Maybe...
hejk said:
my qtek 9000 ROM version 2.07.00 WWE Radio version 1.18.00 suddenly is silent during incoming calls. All other notifications work correctly only incoming calls are silent. I cannot even change the ring tone. Keeps returning to telephone original ring tone but stays silent.
HELP telephone which doesnt ring is pretty useless
Click to expand...
Click to collapse
Have you ever tried the radio ROM to downgrade from 1.18 to Version 1.15?
This happened to me too, and I fixed it by cleaning the "notification queue". I mean properly cleaning it by hand, not just deleting any duplicate notifications.
silence
sl9 said:
This happened to me too, and I fixed it by cleaning the "notification queue". I mean properly cleaning it by hand, not just deleting any duplicate notifications.
Click to expand...
Click to collapse
Ok! Fine idea. But by my experience, after fixing, suddenly appear something else, absolutely unexpected, in a hot moment... I prefer to cut out and to build a new, nice one
help help help
same problem here guys after flashing wm5 to wm6.1 tomal
plz... help to fix the problem
how to clean notification
by the bay i'm new to o2 xda
there were reports that radio rom 1.18 has those problems...
flash back (carefull) to radio rom 1.15... the most stable radio rom