Related
i'm running:
PPC - PDACorner V27, HarpSPL 2.10 Olipro
PC - Active Sync 4,5 Net. 3,5
i can flash my my TyTN from SD without any problems, but flashing from PC always crashes with errors (202 260 302 depends on what box (SPL 2.10 or Safe SSPL) is checked/unchecked)
Auto detect can't detect the SPL version, it always writes: unknown version.
tried to reflash HardSPL 3 times: first attempt - succes (RUU Wrapper still can't detect SPL version) second and third attempts are failed with same errors (202 260 302)
can someone help?
p.s. flashing crashes at 0% or earlier (tri-color screen on PPC)
after reboot OS starts and works fine.
756 said:
i'm running:
PPC - PDACorner V27, HarpSPL 2.10 Olipro
PC - Active Sync 4,5 Net. 3,5
i can flash my my TyTN from SD without any problems, but flashing from PC always crashes with errors (202 260 302 depends on what box (SPL 2.10 or Safe SSPL) is checked/unchecked)
Auto detect can't detect the SPL version, it always writes: unknown version.
tried to reflash HardSPL 3 times: first attempt - succes (RUU Wrapper still can't detect SPL version) second and third attempts are failed with same errors (202 260 302)
can someone help?
Click to expand...
Click to collapse
hmm have you replaced cable? and may be change ports? try deleting all partnership on AS
i tried to reinstall AS.
about USB cable, i don't know if it is original or not, got 3 of them almost identical (2 from card readers)
Mate, if you have Hard SPL on your Hermes, use the sd card method. It has none of those nasty sync errors... Just make sure you have a charged battery, format sd card FAT32, sd card is 2Gb or less and you rename the .nbh file "hermimg.nbh".
Too easy...
Cheers...
As the gentleman said previously... but if you can already flash from the SD card why would you still want to do it via activesync?
ultramag69 said:
Mate, if you have Hard SPL on your Hermes, use the sd card method. It has none of those nasty sync errors... Just make sure you have a charged battery, format sd card FAT32, sd card is 2Gb or less and you rename the .nbh file "hermimg.nbh".
Too easy...
Cheers...
Click to expand...
Click to collapse
thanks, i know how to flash from sd card, i always use this method.
but i have HR issues with some ROMs. in FAQ i read about it, and were trying to flash original (official WM6) ROM.
so how can i solve problem with HR?
756 said:
thanks, i know how to flash from sd card, i always use this method.
but i have HR issues with some ROMs. in FAQ i read about it, and were trying to flash original (official WM6) ROM.
so how can i solve problem with HR?
Click to expand...
Click to collapse
look for the at&t stripped rom, it has the nbh file you need for the sd card.
boog321 said:
look for the at&t stripped rom, it has the nbh file you need for the sd card.
Click to expand...
Click to collapse
i flashed original WM6 RUS ROM. hope it will help. if not, i'll try at&t ROM
Make sure its the stripped version - doesn't have radio rom inside, or you'll be flashing your radio rom again too...
ultramag69 said:
Make sure its the stripped version - doesn't have radio rom inside, or you'll be flashing your radio rom again too...
Click to expand...
Click to collapse
it has only OS) i'm sure. thanks bro.
in the past i found that using a usb hub caused all sorts of issues,are you using a direct usb plug,it doesnt need to be 2.0.
flashing OEM ROM (WM6 RUS) did it's job)
now V12.2 sapphire ROM works fine without HR.
thank you guys for help! appreciate it!
HI, i recently change service from sprint to cricket, i have a htc sprint touch, i accidentaly broke one of the usb pins on my phone, i need to fully flash to cricket. is there any other way? already loaded the cricket prl only text and talk work, as i used my memory card to uploaded it. how can i unlock it so i can load a custom rom with a memory card?
can i use activesync with bluetooth to run the unlocker?
ive tried active sync with BT and didnt have much luck but if you can get it to connect you should be ok ( im just assuming here)
xcaliburpcs said:
HI, i recently change service from sprint to cricket, i have a htc sprint touch, i accidentaly broke one of the usb pins on my phone, i need to fully flash to cricket. is there any other way? already loaded the cricket prl only text and talk work, as i used my memory card to uploaded it. how can i unlock it so i can load a custom rom with a memory card?
can i use activesync with bluetooth to run the unlocker?
Click to expand...
Click to collapse
I don't think you can flash the ROM via bluetooth, but I could be wrong. One thing you can do is flash the ROM/unlocker directly from the memory card in the phone. From what I understand it needs to be a non-HD card (usually 2gb or less) and also needs to be formatted FAT32. Then you can download the 'imcokeman' unlocker, decompress it and pull out the *.nbh file. You will have to rename this to VOGUIMG.nbh and put it in the root folder of the card. Then when you activate the bootloader, by POWER>CAMERA>SOFT RESET it will load the NBH. Then you can also put a custom ROM on this way too...just pull the nbh file from what you get, and follow same procedures after the phone is unlocked. I've never done this before, but I have read where people have done it successfully. If you need more info reference this thread http://forum.ppcgeeks.com/showthread.php?t=20370&highlight=memory+card.
You can also d/l the unlocker there. The area where they are talking about using memory cards is like post 260 or so...good luck. Let me know if you're still stuck.
Also there's a great write up on the process here http://forum.ppcgeeks.com/showthread.php?t=17473.
I tried that it just gets stuck in bootloader, it says "loading..." and nothing happends. what am i doing wrong?
xcaliburpcs said:
I tried that it just gets stuck in bootloader, it says "loading..." and nothing happends. what am i doing wrong?
Click to expand...
Click to collapse
1. Format your MicroSD card to FAT32 (YES - FAT 32 32 32!! not just plain old FAT) (again, this is not required if your card is already fat32; it is ok to have other data on the card). I have read that the card needs to be 2gb or smaller, though I'm not sure how much truth, if any, there is to that...
2. Extract the .NBH you desire to flash from the exe or zip or w/e put it on the microsd card rename it from RUU_signed.nbh to VOGUIMG.NBH
3.Put the MicroSD card in your phone and Get To the BOOTLOADER screen (camer+power+reset) it should then start updating with the .NBH on the SD card and the procedure should begin automatically.
you can also use this procedure to unlock your phone by flashing the .nbh from Cokemans unlocker just extract it and rename it VOGUIMG.NBH or if your stuck at that HTC screen and cant sync because your phone wont boot up.
---This really the best info I can give you...just double check everything you are doing to make sure that you are doing it right. As I said I have never done the unlock process this way, but many people have. Check the second link I gave you in my original post if you need more help...they'll be able to help you I'm sure.
I have done all of that but my phone just gets stuck at the loading grey screen and nothing happends. my phone has the latest rom from sprint. its the 6.1 and I installed it by the bootloader mode with the micro sd card. anything else I can do? if not I found a guy who can repair my mini usb port, but hes about an hour away.
You'll probably waist more time trying to figure this out. I would just drive the hour and get it fixed. It would be more of an investment really especially once you re-sale it for a new phone.
Plus re-programming the phone becomes a whole lot easir 8p
Yeah, that was my Idea, either replace it or fix it. maybe sale it as is and replace it for the touch pro.hmmm, lifes hard choices. what to do...what to do? 8 (
rzawora said:
you can also use this procedure to unlock your phone by flashing the .nbh from Cokemans unlocker just extract it and rename it VOGUIMG.NBH or if your stuck at that HTC screen and cant sync because your phone wont boot up.
Click to expand...
Click to collapse
so i just copy cokemans unlocker to memory card rename it and run it like i would do for a rom?
still waiting for someone to answer this please
i read around for methods on flashing a rom. this is my first time .i did a back up with hpb backup and put hard spl 2 on my phone. from what i read sdcard is the best route to go . my question is do i need to erase everytihng off of my card before doing the rom? or can i leave it all there put the ruu file on there and get started ? maybe i should ask is there a tutorial to how to do the different methods?
a side note how do i know if a rom is friendly to changing the orientation when you slide for the keyboard
Natureboyhcg said:
i read around for methods on flashing a rom. this is my first time .i did a back up with hpb backup and put hard spl 2 on my phone. from what i read sdcard is the best route to go . my question is do i need to erase everytihng off of my card before doing the rom? or can i leave it all there put the ruu file on there and get started ? maybe i should ask is there a tutorial to how to do the different methods?
a side note how do i know if a rom is friendly to changing the orientation when you slide for the keyboard
Click to expand...
Click to collapse
No you don't have to take everything off the card. Make sure your card is 2gig or smaller and not SDHC. Here is a link to the instructions in the wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlash
As far as the keyboard orientation you could search in the rom's thread for any reference to it or just flash the rom and see for yourself.
KK13 said:
No you don't have to take everything off the card. Make sure your card is 2gig or smaller and not SDHC. Here is a link to the instructions in the wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlash
As far as the keyboard orientation you could search in the rom's thread for any reference to it or just flash the rom and see for yourself.
Click to expand...
Click to collapse
im confused, does the card need to be 2gb or smaller, not sdhc, to properly do hardspl or general. cause ive read the phone only supports 2gb or smaller microsd. but i have also seen the 16gb or 32gb thread, ive seen others saying about using larger than 2gb cards in their phones. im awaiting the delivery of my phone currently and i have a 4gb microsd i use in my htc excalibur i was planning on using. so im majorly confused as to if im going to be able to use it or not, or if i just need a 2gb to do the intial hardspl then ill be fine w/ my 4gb once i go to a cooked rom.
would greatly appreciate some clarity on this all from someone.
WM05 and bootloader only support 2Gb or less though there is an sdhc patch for WM05.
WM06 had the patch to support SDHC cards from 4Gb up to 32Gb. WM6.1 and WM6.5 are also SDHC compliant.
You need a 2Gb or less sd card to flash an OS or different SPL as the bootloader only supports 2Gb or less. Its not upgradeable.
Now that everythings clear as mud,
Cheers...
You could also pick up a 1 gig (or even a 512meg) card on the cheap to do your flashing, and use the 4 gig for your everyday storage in the phone. Then have the best of both worlds!
psylink said:
im confused, does the card need to be 2gb or smaller, not sdhc, to properly do hardspl or general. cause ive read the phone only supports 2gb or smaller microsd. but i have also seen the 16gb or 32gb thread, ive seen others saying about using larger than 2gb cards in their phones. im awaiting the delivery of my phone currently and i have a 4gb microsd i use in my htc excalibur i was planning on using. so im majorly confused as to if im going to be able to use it or not, or if i just need a 2gb to do the intial hardspl then ill be fine w/ my 4gb once i go to a cooked rom.
would greatly appreciate some clarity on this all from someone.
Click to expand...
Click to collapse
You need a smaller than 2gig card for flashing. Everything else you can use your 4 gig card. (As Ultramag69 and Boog321 say) The original question was to do with flashing hardspl or roms only.
KK13 said:
You need a smaller than 2gig card for flashing. Everything else you can use your 4 gig card. (As Ultramag69 and Boog321 say) The original question was to do with flashing hardspl or roms only.
Click to expand...
Click to collapse
HardSPL only needed to install once, after that you can install whatever ROMs you like many times.
True, but if you use the sd card method to install roms you will still need a 2Gb or less sd card...
ultramag69 said:
True, but if you use the sd card method to install roms you will still need a 2Gb or less sd card...
Click to expand...
Click to collapse
Hi Ultramag
I have a problem installing with sdcard.
Have followed the Wiki, have discussed with you previously, Boog and anagarika still no solution. I have elaborated step by step what I did in separate thread.
Do you mind have a look and advise some?
http://forum.xda-developers.com/showthread.php?t=316726&page=34
StefanHou said:
Hi Ultramag
I have a problem installing with sdcard.
Have followed the Wiki, have discussed with you previously, Boog and anagarika still no solution. I have elaborated step by step what I did in separate thread.
Do you mind have a look and advise some?
http://forum.xda-developers.com/showthread.php?t=316726&page=34
Click to expand...
Click to collapse
Did you try formating the SD card on a desktop (or laptop) computer and not phone with Memaid?? Maybe that has something to do with it. Is it a 2gig card or less than 2 gig??
As KK13 said, try a pc to format the card as the steps are right.
Double check that the .nbh is named hermimg.nbh as I know of at least 2 people who named it herming.nbh, small mistake but a critical one.
Remove and insert the sd card then reboot to tri-colour screen. Might do something.
But I strongly recommend using the PC to format the sd card FAT32.
Cheers...
ultramag69 said:
As KK13 said, try a pc to format the card as the steps are right.
Double check that the .nbh is named hermimg.nbh as I know of at least 2 people who named it herming.nbh, small mistake but a critical one.
Remove and insert the sd card then reboot to tri-colour screen. Might do something.
But I strongly recommend using the PC to format the sd card FAT32.
Cheers...
Click to expand...
Click to collapse
Onya dude .. you have a better way with words !!
ultramag69 said:
As KK13 said, try a pc to format the card as the steps are right.
Double check that the .nbh is named hermimg.nbh as I know of at least 2 people who named it herming.nbh, small mistake but a critical one.
Remove and insert the sd card then reboot to tri-colour screen. Might do something.
But I strongly recommend using the PC to format the sd card FAT32.
Cheers...
Click to expand...
Click to collapse
OK, will find SDconverter and try the suggestion, thx KK and Ultramag
*Newbie* Custom ROM Flashing Guide
Just follow the steps start from 1. Don't skip step unless it is an optional step.
PC Requirement: Windows XP, ActiveSync [Don't try to flash with Vista if you are new], 7zip Installed (Google it)
Connect your device to your computer and make sure the ActiveSync icon appeared on your phone before proceeding. 50% or above bettery is a must. Your phone won't charge when flashing.
1. HardSPL (A Big Big Must)
I asume you are using the original ROM from manufacture as HardSPL won't work with custom ROM.
Download HardSPL V7 from here. Unzip the whole things. Execute the "RUUWrapper" thing and select "Force Using SSPL". Check all the boxes in all the steps and continue with updates. Look at your phone and press "Yes" to everything that prompted. Then your phone will restart in Tri-Color mode [a.k.a bootloader] and start flashing HardSPL.
In this case if any errors appear on your computer screen before the update progress start, soft reset your phone, let it boot into Windows and start RUUWrapper again.
If error appear during flashing progress, then you might in deep hell. Try not to worry. Manually put your device into bootloader (Hold On/Off Btn + Left OK Btn, then push the soft-reset btn). Then start the RUUWrapper again.
End of the step you should see 'HardSPL 2.10Olipro' in bootloader mode.
2. Radio Flashing *Optional*
You can choose not to flash your Radio Stack if you satisfy with the existing. Additional, Radio Stack flashing is the main cause of device bricking (the death of your device)
Choose and download your Radio ROM here. Do some research about the Radio ROM that fits you and your country. Recommended the latest 1.56.70.11. Unpack everything and you will see something similar to HardSPL (RUUWrapper). Don't run RUUWrapper this time.
Let's do the safe way. Format your MicroSD card into FAT32 (Kill yourself if you don't know). Then copy the RUU_signed.nbh into your MicroSD. Then rename RUU_signed.nbh to hermimg.nbh. Put your MicroSD into you phone.
Manually put your phone into bootloader mode. Then a different screen with grey background should appear shortly. Press On/Off btn to start flashing. After the process done (it will tell you when it is done, don't try to judge yourself if you feels that 50% is done), soft-reset your phone.
During flashing, put your phone aside and enjoy your coffee. Don't touch it before it ends as this is dangerous. Don't ever fail radio flashing. Careful, careful and careful.
End of this step, you should see R 1.56.70.11 during Windows Boot.
3. Custom ROM Flashing
First, download Dopod 838 Stripped ROM. Then unpack it. Delete your previous hermimg.nbh in MicroSD which you use to flash Radio Stack. Then copy RUU_signed.nbh from Dopod 838 Stripped ROM to your MicroSD and rename it to hermimg.nbh. Put your device into booloader and start flashing like how you flash you radio rom. After it done, give your device a Hard-Reset (Hold Left + Right softkey and press Reset. Slide you keyboard then press R and SPACE). This official ROM from Dopod is very important which need to be flashed before you flash your custom ROM.
Then the last step is get your custom ROM loaded. Download custom ROM from this forum (Recommended from TAI_sw or JoshKoss).
Then simply follow the steps in Dopod 838 Stripped ROM Flashing.
(Then copy RUU_signed.nbh from Custom ROM to your MicroSD and rename it to hermimg.nbh. Put your device into booloader and start flashing like how you flash you radio rom. After it done, give your device a Hard-Reset (Hold Left + Right softkey and press Reset. Slide you keyboard then press R and SPACE).)
Yes. I have grammar mistakes. Sorry!
That's your ROM and don't expect every ROM is stable. You will see some bugs in Custom ROM. Post your bugs at their own thread.
Anything just PM me.
Thanks
-Ziv-
zivkong said:
*Newbie* Custom ROM Flashing Guide
Just follow the steps start from 1. Don't skip step unless it is an optional step.
PC Requirement: Windows XP, ActiveSync [Don't try to flash with Vista if you are new], 7zip Installed (Google it)
Connect your device to your computer and make sure the ActiveSync icon appeared on your phone before proceeding. 50% or above bettery is a must. Your phone won't charge when flashing.
1. HardSPL (A Big Big Must)
I asume you are using the original ROM from manufacture as HardSPL won't work with custom ROM.
Download HardSPL V7 from here. Unzip the whole things. Execute the "RUUWrapper" thing and select "Force Using SSPL". Check all the boxes in all the steps and continue with updates. Look at your phone and press "Yes" to everything that prompted. Then your phone will restart in Tri-Color mode [a.k.a bootloader] and start flashing HardSPL.
In this case if any errors appear on your computer screen before the update progress start, soft reset your phone, let it boot into Windows and start RUUWrapper again.
If error appear during flashing progress, then you might in deep hell. Try not to worry. Manually put your device into bootloader (Hold On/Off Btn + Left OK Btn, then push the soft-reset btn). Then start the RUUWrapper again.
End of the step you should see 'HardSPL 2.10Olipro' in bootloader mode.
2. Radio Flashing *Optional*
You can choose not to flash your Radio Stack if you satisfy with the existing. Additional, Radio Stack flashing is the main cause of device bricking (the death of your device)
Choose and download your Radio ROM here. Do some research about the Radio ROM that fits you and your country. Recommended the latest 1.56.70.11. Unpack everything and you will see something similar to HardSPL (RUUWrapper). Don't run RUUWrapper this time.
Let's do the safe way. Format your MicroSD card into FAT32 (Kill yourself if you don't know). Then copy the RUU_signed.nbh into your MicroSD. Then rename RUU_signed.nbh to hermimg.nbh. Put your MicroSD into you phone.
Manually put your phone into bootloader mode. Then a different screen with grey background should appear shortly. Press On/Off btn to start flashing. After the process done (it will tell you when it is done, don't try to judge yourself if you feels that 50% is done), soft-reset your phone.
During flashing, put your phone aside and enjoy your coffee. Don't touch it before it ends as this is dangerous. Don't ever fail radio flashing. Careful, careful and careful.
End of this step, you should see R 1.56.70.11 during Windows Boot.
3. Custom ROM Flashing
First, download Dopod 838 Stripped ROM. Then unpack it. Delete your previous hermimg.nbh in MicroSD which you use to flash Radio Stack. Then copy RUU_signed.nbh from Dopod 838 Stripped ROM to your MicroSD and rename it to hermimg.nbh. Put your device into booloader and start flashing like how you flash you radio rom. After it done, give your device a Hard-Reset (Hold Left + Right softkey and press Reset. Slide you keyboard then press R and SPACE). This official ROM from Dopod is very important which need to be flashed before you flash your custom ROM.
Then the last step is get your custom ROM loaded. Download custom ROM from this forum (Recommended from TAI_sw or JoshKoss).
Then simply follow the steps in Dopod 838 Stripped ROM Flashing.
(Then copy RUU_signed.nbh from Custom ROM to your MicroSD and rename it to hermimg.nbh. Put your device into booloader and start flashing like how you flash you radio rom. After it done, give your device a Hard-Reset (Hold Left + Right softkey and press Reset. Slide you keyboard then press R and SPACE).)
Yes. I have grammar mistakes. Sorry!
That's your ROM and don't expect every ROM is stable. You will see some bugs in Custom ROM. Post your bugs at their own thread.
Anything just PM me.
Thanks
-Ziv-
Click to expand...
Click to collapse
Hi Ziv
I have flashed over twenty or more cooked ROM, and they are successfully done through Active Sync. As you see in my signature, My IPL is 1.04 and my SPL is 2.10 Olipro.
I have also followed Ultramag and KK suggestion to format the SDCard using PC. And still stuck in bootloader (3 colors) and one more: it states 'Serial' in the bottom color (white).
I also bought the new 1GB SDCard, but the problem persit.
So, is there any other suggestion to try?
StefanHou said:
Hi Ziv
I have flashed over twenty or more cooked ROM, and they are successfully done through Active Sync. As you see in my signature, My IPL is 1.04 and my SPL is 2.10 Olipro.
I have also followed Ultramag and KK suggestion to format the SDCard using PC. And still stuck in bootloader (3 colors) and one more: it states 'Serial' in the bottom color (white).
I also bought the new 1GB SDCard, but the problem persit.
So, is there any other suggestion to try?
Click to expand...
Click to collapse
Ultramag, KK13, Boog & Zocster
Have tested using SD Converter and formatted it with PC, still no use. In the boot loader screen, I stucked with 'Serial' in the white bar. Is this meaning something to you? Any other work around?
Man, I don't have a clue. The only issue I ever encountered was thinking my card was formatted fat32 when it wasn't.
I think this is now beyond me.
StefanHou said:
Ultramag, KK13, Boog & Zocster
Have tested using SD Converter and formatted it with PC, still no use. In the boot loader screen, I stucked with 'Serial' in the white bar. Is this meaning something to you? Any other work around?
Click to expand...
Click to collapse
Well now .. you've got me too. I have only had "serial" showing in the boot loader once and it was because I had the wrong sd card in with no HERMIMG file. Once I put the right one in with the file and reset the device it was ok. All I would suggest is to do a Hard reset and follow all the steps again one by one, triple checking everything. Maybe write everything you do down and post it back here.
Also check your spelling of hermimg.nbh as a simple error will screw up everything...
Also put sd card in then reset to bootloader, hold in all the buttons - ok, power and reset with stylus, until the bootloader comes up.
Cheers...
KK13 said:
Well now .. you've got me too. I have only had "serial" showing in the boot loader once and it was because I had the wrong sd card in with no HERMIMG file. Once I put the right one in with the file and reset the device it was ok. All I would suggest is to do a Hard reset and follow all the steps again one by one, triple checking everything. Maybe write everything you do down and post it back here.
Click to expand...
Click to collapse
KK13, Boog and Ultramag
OK this is what I did last night:
1. Flashing to the shipped AT&T Stripped ROM
2. Having it reflashed with the HardSPL V7 (to ensure the file is non corrupted, I re-downloaded it from some links in some thread and check the file size, they are all the same )
3. Reformating my SD Card with PC for FAT32;
4. Copy the nbh file and rename it with HERMIMG.nbh (recheck three times and I think I get it right. btw, is there any different to write it in capital? );
5. Press OK and Power, then stick the reset button.
6. Go to the boot loader (with 'Serial' on ht white screen)
Is there an upgrade guide for noobs. I recently upgraded my phone to wm6.5 but the radio is 3.42.30 and I get terrible reception and static. I know that upgrading might not fix this, but its worth a shot. If there isn't a guide, where are the files at and how to flash the radio, and is there a way to upgrade the radio without flashing the phone? Thanks!
Hunterkiller5150 said:
Is there an upgrade guide for noobs. I recently upgraded my phone to wm6.5 but the radio is 3.42.30 and I get terrible reception and static. I know that upgrading might not fix this, but its worth a shot. If there isn't a guide, where are the files at and how to flash the radio, and is there a way to upgrade the radio without flashing the phone? Thanks!
Click to expand...
Click to collapse
Here is the link.
http://rapidshare.com/files/292069861/VOGUIMG.nbh
How to:
- Place the .nbh file on a SD Card (2GB or less), FAT32, Allocation Unit Size 1024 bytes.
- Put phone Bootloader mode (Power+camera+reset), the phone will upload the radio automatically.
PD. The process will not wipe your phone.
caquito07 said:
Here is the link.
http://rapidshare.com/files/292069861/VOGUIMG.nbh
How to:
- Place the .nbh file on a SD Card (2GB or less), FAT32, Allocation Unit Size 1024 bytes.
- Put phone Bootloader mode (Power+camera+reset), the phone will upload the radio automatically.
PD. The process will not wipe your phone.
Click to expand...
Click to collapse
will this work with the RUU?
i dont have a 2gb or less available mirco sd card.
Hello
What radio version is there in that rapidshare link?i have come across a thread in ppcgeeks about a radio 3.42.40 and the user reports of significant improvement in signal.but i think this said version is ported from a mogul.so wont there be any issue if it's flashed to a vogue?has anybody used this radio on vogue?if yes,please report back here.
Ive seen the program OpenRUU but can anyone tell me how to use it?
i want to flash from software 2.09 to 2.10 or above? is this possible? im rooted thru unrevoked but running a stock rom. Other than a gold card do i need anything else to use this program? and even if the ruu fails, it will not damage my phone?
thanks, adbird
EDIT: Actually do i need a gold card, my phone used to be branded under telus, but then i flashed a couple roms and eventually flashed the stock WWE rom, so do i need a gold card?
I have no experience with Mac but if you can't use a RUU, there is the PB99IMG.zip(which you can find using windows when the RUU is extracted) method which functions pretty much the same.
As for the gold card, you do need one, - debranding a branded handset doesn't make it unbranded .
Some people confuse "debranded" and "unbranded".
k thanks i guess i gotta go buy another sd card :/
There is no problem in making your regular card in the device, your goldcard, i.e., you don't need a dedicated microSD for gold card use exclusively .
but isnt clockworkmod kept on the sd? what if you format it
If I understand you correctly, you want to flash "2.10 or above".
Make a your card a goldcard ;
Put the ROM you want to install in the root of the memory card (/sdcard/ - in other words it should not be in any folder);
Make sure that the rom is renamed from something like "PB99IMG_Bravo_Froyo_HTC_WWE_2.29.405.2_Radio_32.49.00.32U_5.11.05.27_release_151783_signed.zip" to "PB99IMG.zip" (zip is the extension, not part of the name);
Turn off the phone;
Turn on the phone while holding volume down, it should be recognized and you'll be asked to apply it.
will that unroot the device?
This might work for you
It helps flashing RUU's
WAIT, BEFORE YOU START, CREATE A GOLDCARD. IT IS VERY NECESSARY. THINGS WILL GO WRONG IF YOU DONT.
EDIT: YOU MUST BE ABLE TO BOOT GO TO THE BOOTLOADER MENU.
Firstly, download this file. http://dl.dropbox.com/u/13240777/Desire Downgrade.ZIP
Extract the files.
Transfer the file PB99IMG to the root of your SD card (It is located in the extracted files)
Secondly, disconnect your phone and turn it off.
After that boot up your phone while pressing the volume down button and the power button.
The bootloader should be checking for files after awhile and once it found the file that is supposed to be in the root of your sd card, press the volume up button (NOT EXACTLY SURE, SHOULD BE THE ONE THAT SAYS YES AND CONTINUE)
It should be writing files to your phone. and replaces everything. E.G: HBOOT, RECOVERY,RADIO and such.
It should be writing files successfully and then it would ask you to reboot. Continue with the reboot and you should be having your Desire back to stock. Perfect.
PLEASE KEEP IN MIND THAT THERE ARE RISKS INVOLVED LIKE FAILURE OF WRITING TO THE HBOOT. PLEASE REMEMBER TO FOLLOW INSTRUCTIONS. MAINLY, DO NOT BLAME ME FOR ANYTHING THAT GOES WRONG.
FINALLY, YOU SHOULD BE READING EVERYTHING UP TO HERE AND THAT YOU MUST HAVE A GOLDCARD (A GOLD SD CARD)
Hope this helps you and please ask if you have further questions. PM me if the questions cannot be answered here. Good Luck
adbirdie said:
will that unroot the device?
Click to expand...
Click to collapse
Yes, flashing a RUU unroots the phone.
But rooting again is easy.