Is it possible to use the ATT&T unlock code and procedure on a Tilt2 that has already been flashed with Energy ROM?
If you already flashed a cooked ROM (Like Energy´s) it means your Rhodium is already unlocked
So no need to do it again, now you can flash any ROM (stock or cooked) you want!
Don´t forget to vote!
yes, the ROM is unlocked. But I am asking about the SIM. When the SIM is unlocked then you can use the phone on any carrier, not just AT&T.
Sorry, misunderstood
I would assume so, just get the code and put in a foreign SIM card and it should ask you for the unlock code which you then enter.
I can't imagine changing the software will change the code which is always the same and based on the IMEI.
Which is why with the older phones, it was easy to crack the algorithm, now a days they have made it harder but I guess it is still possible. Mostly these days the cracks come from sniffing the code out using software on the device (you couldn't flash old Nokia's, so you had to break the algorithm) or buy injecting a hack (like the iPhone's unlock) that hides the real unlock hardware/radio/software and just always responds unlocked.
Thankx for the clear answer. I received the unlock code from AT&T and when I am in the foreign country and put the foreign SIM in, then I'll keep my fingers crossed that the phone will ask me to input the code.
thisisallen said:
Thankx for the clear answer. I received the unlock code from AT&T and when I am in the foreign country and put the foreign SIM in, then I'll keep my fingers crossed that the phone will ask me to input the code.
Click to expand...
Click to collapse
You can unlock it now. Just get a T-mobile SIM and put it in your AT&T Tilt2. It'll boot up and ask for your unlock code.
Related
I called Tmo (USA) and told them that I was travelling to Canada and wanted my SIM unlock code for my Dash. I gave them my IMEI and they emailed me a 8 digit code to unlock the phone. Only problem is that I need the "foreign" SIM to initiate the code entry on the phone according to their instructions (see below). I am wondering if there is another way to do this without the "foreign" SIM because I want to unlock it prior to travelling in fear that I dont want to break/brick my Dash while travelling.
Here is their email to me:
T-Mobile Sim Unlock Request
Sim Unlock Reference: XXXXXXX
IMEI: XXXXXXXXXXXXXXXX
Unlock Code: XXXXXXXX
Thank you for taking the time to contact T-Mobile. Below you will see the Instructions for unlocking your HTC device.
1. Insert the foreign SIM card
2. Power on the device and the display should read "Please input unlock code"
3. Enter the unlock code and the device should display "Phone is unlocked."
4. Allow the phone to scan the network (or manually click on the antenna icon to do this)
It is very important that the instructions and SIM unlock code are entered correctly as listed. If you receive an error message while performing the instructions do not make any further attempts to unlock the handset. Please be aware that if an excessive amount of incorrect attempts are made, the phone will be permanently locked. You will need to verify the IMEI by pressing *#06# and contact Customer Care for support.
I saw this file (DASHv2Unlock.zip) from here. Anyone know if the code I got from Tmo will work with the DASH2Unlock program?
Thanks!
well im in states and i called tmo and told them i was going to london just to get a unlock code and all i did was put my moms cingular sim in and boom unlocked just like that foreign card just means a diffrent sim like one of cingulars ask a friend for theres if they have cingular
^^^What he said
neggie said:
well im in states and i called tmo and told them i was going to london just to get a unlock code and all i did was put my moms cingular sim in and boom unlocked just like that foreign card just means a diffrent sim like one of cingulars ask a friend for theres if they have cingular
Click to expand...
Click to collapse
Thanks, I try to go to a local Cingular retail store. MOst of my friends use Nextel or Sprint or Tmobile around here. Cingular has terrible coverage in Hawaii.
Sim
You shouldn't need a "foreign sim," but rather any sim that's not on your carrier, then the phone should give you the unlock code prompt. I always keep an old cingular sim around for this purpose.
^ Any SIM other than your carrier's SIM is a foreign one.
~Cheers~
Actually, to unlock the phones you do not even need a foreign sim. You can use your T-Mobile SIM. They just tell you that so you can make sure it's working
shiggins9 said:
You shouldn't need a "foreign sim," but rather any sim that's not on your carrier
Click to expand...
Click to collapse
Thanks for the laugh
Yep, fairly easy. As soon a TMo emailed me my unlock code, I borrowed a coworker's cingular sim card and took all of 30 seconds total.
PaisanNYC said:
Yep, fairly easy. As soon a TMo emailed me my unlock code, I borrowed a coworker's cingular sim card and took all of 30 seconds total.
Click to expand...
Click to collapse
Could have taken 15 seconds if you didn't swap SIMs
merwin said:
Could have taken 15 seconds if you didn't swap SIMs
Click to expand...
Click to collapse
How would you enter a code otherwise?When the Cingular sim was in it, it automatically prompted me for the unlock code.
Good question
im also curios as i dont have a foreign sim handy jsut been waiting for one to come my way to unlock.
When TMo unlocks??
When you have TMo unlock the phone for you is the SIM unlocked and the CID unlocked also? Or do I have to use the website everyone has mentioned to get both things unlocked?
randynchicago said:
When you have TMo unlock the phone for you is the SIM unlocked and the CID unlocked also? Or do I have to use the website everyone has mentioned to get both things unlocked?
Click to expand...
Click to collapse
Just a SIM unlock
unlocked now
Well finaly borrowed a cingular sim and got unlocked.
everything went well.
What now ?
Hop on a plane to London, make some calls...
yggdrasil said:
Well finaly borrowed a cingular sim and got unlocked.
everything went well.
What now ?
Click to expand...
Click to collapse
foriegn sim doesnt prompt to enter unlock code
Hello,
I just got my unlock code from TMO today. I put in a ATT sim but it does not prompt me to enter the code just says "Searching..." but never finds the signal.
Any help is appreciated.
currently running WM6.5 ROM V6.30EN By Lovebabyjing Build 23017[12/09/09]
tried to flash back to tmo official but kept getting errors at 3% of upgrade. "error 244 incorrect model id???"
Forgive me, I couldnt find the answer to this question.
If it doesnt, what is the best way to do it!
Thanks!
Are you looking to SIM unlock your phone?
Zylograth said:
Are you looking to SIM unlock your phone?
Click to expand...
Click to collapse
Yes, sorry
There are various sites that will give you the unlock code which is based on your IMEI number, but you shoudl be able to contact the carrier that branded the device and ask them for the unlock code. Then just put the SIM card you want to use in the phone and turn it on, you will get a Network is locked message with a box for you to enter the unlock code you got from the branded carrier.
Zylograth said:
There are various sites that will give you the unlock code which is based on your IMEI number, but you shoudl be able to contact the carrier that branded the device and ask them for the unlock code. Then just put the SIM card you want to use in the phone and turn it on, you will get a Network is locked message with a box for you to enter the unlock code you got from the branded carrier.
Click to expand...
Click to collapse
I havent been able to get an unlock code since the 90's - I use Tmobile and they wouldnt even consider doing it.
If you are unable to obtain the unlock code from T-Mobile then you may want to check this thread:
http://forum.xda-developers.com/showthread.php?t=555339
This might be a less then educated question however, is there a way to enter an unlock code without using a non carrier specific SIM card. I have a T-Mobile TP2 and have the unlock code for it however, I have no interest or access to another carriers SIM card. I just want to plash ROMS not change providers… The current OS on the device is the TM issued Win Mo 6.5….
Any Help Would Be Appreciated….
Thank You
You must pay for a SIM unlock code, then you can flash another ROM.
Instructions how:
http://forum.xda-developers.com/showthread.php?t=550540
Good luck,
181iq said:
This might be a less then educated question however, is there a way to enter an unlock code without using a non carrier specific SIM card. I have a T-Mobile TP2 and have the unlock code for it however, I have no interest or access to another carriers SIM card. I just want to plash ROMS not change providers… The current OS on the device is the TM issued Win Mo 6.5….
Any Help Would Be Appreciated….
Thank You
Click to expand...
Click to collapse
you are thinking of a sim unlock not a carrier unlock.
to flash a rom you have to be carrier unlocked and have hard spl. that is totally separate from sim unlocking.
Is anyone able to help me with an unlock code for At&t Tilt 2???
I think they frown on that kind of thing in here.
will loading a custom rom on the phone unlock the network?
alroco20 said:
will loading a custom rom on the phone unlock the network?
Click to expand...
Click to collapse
No. To SIM unlock, you must either use this utility or get an unlock code based on your device's IMEI.
Just call AT&T they'll give it to you over the phone. I was going up to Canada for a week and got them to unlock my phone for me. Well to give me the unlock code. As soon as I was up there I put in the new sim card and punched in the code and it worked like a charm.
alroco20 said:
Is anyone able to help me with an unlock code for At&t Tilt 2???
Click to expand...
Click to collapse
AT&T's policy is to provide the unlock code 90 days after the purchase date (although their website states after service has been active for 90 days).
nop they are diferent stuffs , one thing is change software and other unlock phone
I called and got my phone's unlock codes (domestic) however Sprint declined to provide how to unlock instructions. told me to go to my future carrier and give them the unlock code.
I called T-Mobile current provider and they told me... no Sprint can unlock and TMo, doesn't know how.
so I am stuck with legitimate Sprint unlock codes... and no idea how to use them.
Someone knows how this works here or it's better off just flash customs rom and unlock XDA way?
Thanks,
When you insert another carrier's SIM (in this case, T-Mob) it should ask for the code, then you just enter it.
Custom ROM isn't going to help you unlock the SIM, nor is there a working "hack" to do so without a code.
Thanks for your reply,
I've tried ATT, TMO sim and the phone does not ask for sim unlock code... it just says contact customer care.
or if someone knows how to get the phone to ask me for SIM/UICC unlock code... some hot keys to press, that can help too since I have the codes from Sprint.
**i am also reading about Sprint Sim unlock on One M8, so complicated!!!**
If you talking about the following mods, they are for unlocking the bands, which AFAIK is not the same as SIM (subsidy) unlock:
http://forum.xda-developers.com/htc-one-m8/general/unlock-bands-qualcomm-device-phone-t2880239
http://forum.xda-developers.com/htc-one-m8/general/how-to-convert-cdma-m8-sprint-vzw-gsm-t3303812
yeah, can't find a way to unlock sim to use w/ T-mo ATT. strange... I have the codes from Sprint and no one's done it? good thing I got HTC 10 factory unlocked this time no such problem later on