Related
Damn alcohol I hate you!! [shakes fist at the air]. Anyway, I dropped my Artemis and pretty much FUBARed its fascia so it's now all scratched and looks horrible (device seems fine though
Do fascia replacements exist for these devices and if so, can someone please point me to where I can buy one in EU.
Any help would be highly appreciated.
Thx
I am usually the last person on earth to recommend something as aftermarket as this - but the silicone cases on ebay look to be the closest fix out there right now. And if you are susceptible to getting so intoxicated you will drop your phone again, this thing might just save its life next time.
Same problem with dropped fone...
Astro:
I dropped my P3300 as well, scuffed up the facia of the housing and have two big scars on my handset. I was really not liking that at all so I decided to contact HTC America to send it in for repairs at my cost to replace the housing.
Well, after two weeks of evaluation and one week of shipping, NO DICE. My Artemis is still scuffed up and I am out 20bux for return shipping. I have emailed HTC back to complain but it looks like that avenue will come to no avail.
Time to find the pantone colour for the HTC branded device and try to touchup paint the housing myself, definitely will decrease my resale value in the future.
Let me know if you have luck finding a solution to replace the housing.
Good News!
I found what you guys are looking for...
http://mobile.brando.com.hk/HousingHTCP3300.php
itschase said:
I am usually the last person on earth to recommend something as aftermarket as this - but the silicone cases on ebay look to be the closest fix out there right now. And if you are susceptible to getting so intoxicated you will drop your phone again, this thing might just save its life next time.
Click to expand...
Click to collapse
lol, I wasn't really that intoxicated, but because I am lazy and take then phone out of the pouch while attached to my belt (instead of taking the puch on my hand, then the phone out) it's very prompt to slip... I knew it'd happen one day.
I was rather tipsy and distracted looking at something when "swishhh off my hand onto floor... face down sliding 3-4 meter on hard rough road" Nice
Astro:
I dropped my P3300 as well, scuffed up the facia of the housing and have two big scars on my handset. I was really not liking that at all so I decided to contact HTC America to send it in for repairs at my cost to replace the housing.
Well, after two weeks of evaluation and one week of shipping, NO DICE. My Artemis is still scuffed up and I am out 20bux for return shipping. I have emailed HTC back to complain but it looks like that avenue will come to no avail.
Time to find the pantone colour for the HTC branded device and try to touchup paint the housing myself, definitely will decrease my resale value in the future.
Let me know if you have luck finding a solution to replace the housing.
Click to expand...
Click to collapse
Sorry to hear that mate, hope you get it fixed
I found what you guys are looking for...
http://mobile.brando.com.hk/HousingHTCP3300.php
Reply With Quote
Click to expand...
Click to collapse
Thanks very much, bit pricey but at least it confirms they do exist
astrodemoniac said:
lol, I wasn't really that intoxicated, but because I am lazy and take then phone out of the pouch while attached to my belt (instead of taking the puch on my hand, then the phone out) it's very prompt to slip... I knew it'd happen one day.
I was rather tipsy and distracted looking at something when "swishhh off my hand onto floor... face down sliding 3-4 meter on hard rough road" Nice
Click to expand...
Click to collapse
I was joking with ya If could have back half of the things I broke while drinking..., check out the link I found...2 posts up. I don't think it will work for an Orbit (Or willll it....hmmmm) but it seems to be the complete package.
I wonder if one could change over the insides of an Orbit to make it look like a 3300.....interesting...
Thanks for the link. I changed out many motorola housings in the VXXX series handsets but never a smartphone. This is exactly what I am looking for. Now the search is one for instructions for the change over!
It is an interesting idea to try and put another 3300 device into the HTC branded housing.
Great!
disassembling ARTE
bex,
look on my document, how to disassemble ARTE device.
Good luck
http://forum.xda-developers.com/showthread.php?t=298413
regards,
fdp24
Thanks FDP, looking at your docs now. Was a bit tricky using the russian language link, but figured it out.
Much thanks, will take my time looking this over.
Regards,
Hi, I'm from Portugal and I have an O2 Orbit and I need a new housing cover, but since the O2 isn't on sale in Portugal I was wondering if it is possible to use an HTC P3300 cover instead??? Anyone tried this already???
I might be able to help.
is the cover your after for the battery.. if so pm me and i can send you one out. its an old one i had from my old uk 02 Orbit. Im not sure if the p3300 will fit. maybe some one else can help you, but I dont mind sending it out ya,it's just sat here doing nothing, its is a little worn on the silver bits but better than nothing
mavisdavis - Actually I was thinking about the whole cover, battery front and back, but in fact the worst part is the battery cover... If you say you have a battery cover that you don't use and it isn't any trouble to you to send it to me, I'll sure be thankful!!! I'll pay for the ports of course... If so PM me, ok???
Nevertheless my question remains, is it possible to use a P3300 cover in a O2 Orbit???
Thanks in advance
Hugo Costa
The answer to your question is YES, the P3300 housing does fit the xda Orbit, I had one on mine, I still have it and can sell it to you ?
Again thank you very much for your reply, Think I'll be trying one then...
Jester01 - Also thank you very much for your offer but I think the postal costs will be too high to make it worth sending the cover from UK to Portugal...
Nevertheless PM me with your offer, we never know...
Regards
hcosta said:
Again thank you very much for your reply, Think I'll be trying one then...
Jester01 - Also thank you very much for your offer but I think the postal costs will be too high to make it worth sending the cover from UK to Portugal...
Nevertheless PM me with your offer, we never know...
Regards
Click to expand...
Click to collapse
Can't imagine postage to be that much, as these are very light, I would accept £30.00 gbp for it, it is in very good condition and I will include 3 stili as they are different to the orbit one's.
Jester01 said:
The answer to your question is YES, the P3300 housing does fit the xda Orbit, I had one on mine, I still have it and can sell it to you ?
Click to expand...
Click to collapse
How can you that? XDA Orbit have a locker for the Battery cover, and the p3300 doesnt have, so the extUSB is not in the same position
ryomahino said:
How can you that? XDA Orbit have a locker for the Battery cover, and the p3300 doesnt have, so the extUSB is not in the same position
Click to expand...
Click to collapse
Sorry to say, but it's the same mother board, so check before you post !
And I've had a p3300 oem HTC housing on my orbit for the past few months, yes you are correct with the battery lock, but that's an addition 02 have added.
does it work vise-versa too? will a xda orbit housing fit with no-hassle on a p3300??
thanx
elatirio said:
does it work vise-versa too? will a xda orbit housing fit with no-hassle on a p3300??
thanx
Click to expand...
Click to collapse
elatirio
--------------------------------------------------------------------------------
Couldn't say for definate, but logic states it should as I said I have an Orbit, and used a p3300 housing on it, so there is no reason why it shouldn't work the other way round.
You are just using the components inside and none of the phones original plastics, i.e. you only swap the motherboard, lcd, vibration motor, front earpiece and rear speaker.
You have to also use a different stilus, as they are shaped on the end different.
Hope this helps.
=== The Jester ===
Jester01 said:
elatirio
--------------------------------------------------------------------------------
Couldn't say for definate, but logic states it should as I said I have an Orbit, and used a p3300 housing on it, so there is no reason why it shouldn't work the other way round.
You are just using the components inside and none of the phones original plastics, i.e. you only swap the motherboard, lcd, vibration motor, front earpiece and rear speaker.
You have to also use a different stilus, as they are shaped on the end different.
Hope this helps.
=== The Jester ===
Click to expand...
Click to collapse
makes sense. thanks for the feedback
Jester01: Thank you for your offer, but i managed to get a cover around here, thanks anway.
Case: Artemis vs XDA Orbit
As far as I see from this picture and my Artemis in my hand cases seem to be fully exchangeable... Anyone knows for sure?
sasha817 said:
As far as I see from this picture and my Artemis in my hand cases seem to be fully exchangeable... Anyone knows for sure?
Click to expand...
Click to collapse
They are 100% exchangeable...
Jester01: Thank You pal! Now I would buy XDA's one, 'cause I like it better ^^
I tried fitting the p3300 housing (bought from ebay) on my o2 xda and i couldn't do it, i don't know how but it just wouldn't fit and i could see the housing was bulging unnaturally in various places. I got a replacement xda housing set which fit perfectly.
the version i bought from ebay didn't have the side buttons and there are various bits in the back plate - speaker, vibrate device etc which you need to remember to take out and put in the new one.
also, i seem to be getting very poor reception now, i don't know if this is because i've changed the rom (tried oops, touch 4.02 and rolled back the radio version) or perhaps I damaged the antenna somehow by changing the housing?? - anyone with experience?
thanks.
feridoun said:
I tried fitting the p3300 housing (bought from ebay) on my o2 xda and i couldn't do it, i don't know how but it just wouldn't fit and i could see the housing was bulging unnaturally in various places. I got a replacement xda housing set which fit perfectly.
the version i bought from ebay didn't have the side buttons and there are various bits in the back plate - speaker, vibrate device etc which you need to remember to take out and put in the new one.
also, i seem to be getting very poor reception now, i don't know if this is because i've changed the rom (tried oops, touch 4.02 and rolled back the radio version) or perhaps I damaged the antenna somehow by changing the housing?? - anyone with experience?
thanks.
Click to expand...
Click to collapse
May I ask how much did you pay for that new housing?
For your question, I "guess" that because the housing doesn't fit perfectly, the antenna parts (a metal plate that stick with the body part of the housing) are not attached well to the connector of the phone board. So the signal would be bad.
I said "guess", because I have an experience like this before with my Siemens M55
Oh, one more question which I need to know a lot. Does the front plate (not the battery cover or antenna cover - which of course I knew it's made of plastic) made of Aluminum or plastic?
sombatsombat said:
May I ask how much did you pay for that new housing?
For your question, I "guess" that because the housing doesn't fit perfectly, the antenna parts (a metal plate that stick with the body part of the housing) are not attached well to the connector of the phone board. So the signal would be bad.
I said "guess", because I have an experience like this before with my Siemens M55
Oh, one more question which I need to know a lot. Does the front plate (not the battery cover or antenna cover - which of course I knew it's made of plastic) made of Aluminum or plastic?
Click to expand...
Click to collapse
Thanks, I'll open it up and take a look at the connections - maybe the screws need a bit more tightening.
They both cost around £25 and it's all made of plastic - painted plastic although the XDA case is certainly better quality than the htc design.
I still have the HTC housing which is 'as new'. I'll sell it for £20 if anyone's interested.
How to open the XDA Orbit
Hi,
I would like to change the housing of my XDA Orbit too. But I only found disassembly instructions for HTC P3300 and this instructions did not work. I cant remove the plastic part which covers the gps, gsm and wlan antenna.
Can someone give me a hint or provide disassembly instructions.
Kind regards,
hqqh
hqqh said:
Hi,
I would like to change the housing of my XDA Orbit too. But I only found disassembly instructions for HTC P3300 and this instructions did not work. I cant remove the plastic part which covers the gps, gsm and wlan antenna.
Can someone give me a hint or provide disassembly instructions.
Kind regards,
hqqh
Click to expand...
Click to collapse
I did find some instructions by googling, I think the trick is to peel off the rear part by levering the stylus in it's port.
I dropped my Rhodium on asphalt.....its operational but there are scratches on the right edge of the digitizer and housing. Anyone knows where I can buy a digitizer and housing parts for a T-Mobile US Touch Pro 2? The housing and digitizer is a little different from the other Touch Pro 2s
Am another one
Well,
I have exactly same problem. But inspite of that guy i bought a damaged piece of that phone from ebay.
Its got completely destroyed Housing and the Digitizer seems to be bad to.
I would like to kick myself that I didnt knew, that the T-Mobile version is different...
I knew that ATT mades different housing, but T-Mobile...
So guys, is there a chance to get a housing and specificaly for the T.-Mobile HTC TP2 and If there is not, is it possible to convert the T-Mobile version into standard one? Using stanard housing and digitizer... ??
Thanks alot for your reply
The button layout and the shape is a little different between the T-Mobile US version and the HTC gsm version.....I already did my research.
But where to get that housing...
It seems that I have found a guy on ebay who is able to get me the Digitizer, but not the housing...
You found a digitizer? PM me the name of the seller if he has more.
As for the housing, how about using a T-Mobile TP2 display housing since there is none available yet? I saw a couple of Ebay sellers with dummy displays
ATLDON said:
You found a digitizer? PM me the name of the seller if he has more.
As for the housing, how about using a T-Mobile TP2 display housing since there is none available yet? I saw a couple of Ebay sellers with dummy displays
Click to expand...
Click to collapse
Do you have a link for the dummy T-mo TP2s? I did a search but didn't find any. I need a new keyboard for mine, thanks...Tj
TrekkerJmm said:
Do you have a link for the dummy T-mo TP2s? I did a search but didn't find any. I need a new keyboard for mine, thanks...Tj
Click to expand...
Click to collapse
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=160370805377&_trkparms=tab=Watching
Only one seller right now.
I have been buying some parts off eBay for my original Tilt and some from another website www.fonlogix.us
FonLogix also has instructional videos of how to dismantle the phone but I think those are the Wiki's here too.
I have not checked to see whether fonlogix has parts for the TP2, as modified by Tmo. I have to order parts for a BB Curve later so I will check but you can check them out. You can also google it. There are a number of companies that are selling the parts for phones.
ATLDON said:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=160370805377&_trkparms=tab=Watching
Only one seller right now.
Click to expand...
Click to collapse
Thank You...Tj
ATLDON said:
You found a digitizer? PM me the name of the seller if he has more.
As for the housing, how about using a T-Mobile TP2 display housing since there is none available yet? I saw a couple of Ebay sellers with dummy displays
Click to expand...
Click to collapse
Well am awaiting the photos of that digitizer first. If he will send me those, then am gonna give you his contact on eBay..
Do you think that those dummy phones uses the real Housing? If so, than its a awesome idea, but am raelly not sure about it...
And the second problem is, that they do not ship outside US
If you are getting both the Digitizer & Housing you should be able to use any one that doesn't have the headphone jack hole. The internal guts "should be the same. The main difference is the T-Mobile one has a different digitizer & bezel. Just my thought on this.
drkfngthdragnlrd said:
If you are getting both the Digitizer & Housing you should be able to use any one that doesn't have the headphone jack hole. The internal guts "should be the same. The main difference is the T-Mobile one has a different digitizer & bezel. Just my thought on this.
Click to expand...
Click to collapse
Well, the housing is a actual problem, as long as I cant find it anywhere.
As what I have heard, the backplate and battery cover should hass the same dimensions and the only thing that is different is the front bezel and the digitizer, that has got different buttons position. ( at least the Tmobile version looks nicer to me
did any one have any luck with housings or if a dummy phone will work
thatruth132 said:
did any one have any luck with housings or if a dummy phone will work
Click to expand...
Click to collapse
No not yet the dummy phone was just a plastic screen. Patiently waiting for the screens becoming available
Over the years, my preferred method of addressing the wear/tear was not by using cases (which add bulk), but my simply getting a new phone housing when the old one gets too scratched up.
And it looks like OEM-like housing for HD mini are beginning to appear on the market, such as here.
Looks like HD mini housing is absolutely identical to Aria's. I'm going to stock up on one and give it a try.
Please let us know how this works out, I wonder if someone will sell just the back cover.
Sent from my HTC Liberty using XDA App
With most phones now having glass in the capacitive touch screens, I just don't see your extra housing providing much protection from a drop.
It's still a good idea though.
yollasho said:
With most phones now having glass in the capacitive touch screens, I just don't see your extra housing providing much protection from a drop.
It's still a good idea though.
Click to expand...
Click to collapse
Indeed I'd be concerned about the screen in the case of a drop, but agreed its a good idea. Let us know how this works out, I'll have to keep it in mind if it does work on if/when my housing ever takes a beating
I bought 2 of these from ebay thinking the exact same thing. They were advertised for the HD mini as we all now know it is the arias winmo twin. When i received my housings I was very excited to try them on but ended up being very disappointed. The housing came with a few pieces of excess plastic from the manufacturing process which was no big deal. Next I noticed that there were no volume buttons, again not too big of a big deal as they can be carefully removed off the old case and hopefully attached to the new case. The absolute deal breaker was the fact that the Aria antenna IS the back cover, and this replacement did not include the antenna. I examined the original and I do not believe it is possible to remove the antenna and reattach it to a replacement. However this particular housing may be different, either way let us know what your results were.
check these out they look like oem with the htc
http://www.amazon.com/Amzer-Luxe-Argyle-Skin-Case/dp/B003TFDIZC/ref=pd_rhf_shvl_2
pcruz said:
The absolute deal breaker was the fact that the Aria antenna IS the back cover, and this replacement did not include the antenna.
Click to expand...
Click to collapse
You're right -- none of the HD mini housings I see advertised on Ebay have the antenna contact leads on the inside
b_atman said:
check these out they look like oem with the htc
http://www.amazon.com/Amzer-Luxe-Argyle-Skin-Case/dp/B003TFDIZC/ref=pd_rhf_shvl_2
Click to expand...
Click to collapse
That's a case, what's being discussed here is the actual body of the phone
It's too bad about the mini's back cover not having the antenna contacts, hopefully true Aria accessories will start coming out and you can get your hands on a real housing for it
ya sorry about that , it was deceptive looking the first one i looked at had the logo and tri-screw holes. thought it was a replacement back cover
So i work for at&t and as such had the good fortune to win one of these amazing devices that I have decided to switch to as my main device over my Galaxy Note. That being said I really dont like the black finish and would really much rather have a cyan or white one. Is anyone aware of anyway to purchase replacement casing for them? And roughly how much they would run? With these phones being so easy to tear down I would much rather replace the casing than just buying a case for it.
I did a quick search and didn't find any replacement parts available just yet for the Lumia. But, I've never seen them not be available for a phone eventually, so I would stay on the lookout.
Ooops, did a quick look on ebay on found a cyan and black one http://www.ebay.com/itm/Blue-Origin...463?pt=LH_DefaultDomain_0&hash=item416480afd7. Guess these didn't come up on the Bing or Google search as they're the only ones. Better hurry
Can anybody tell if the speaker is included in that housing?
hiko36 said:
Can anybody tell if the speaker is included in that housing?
Click to expand...
Click to collapse
I would ask the guy who bought one.... assuming its the guy above on this thread?
Its hard to tell from the pic if the speaker is in there. There is the black square part that is off-center at the bottom where the holes are but its not easy to see if it is a speaker or not but it has two gold contacts next to it. You might try asking the seller a question.
interesting that they have a "Make an offer" button but it auto-declines as I just tried $45 and it fails instantly.
hiko36 said:
Can anybody tell if the speaker is included in that housing?
Click to expand...
Click to collapse
Based on the service manual in the following link, pages 19 & 20 it does appear to be included.
Judge for yourself:
http://forum.xda-developers.com/showthread.php?t=1648977