Related
I've been using my Dash on the weekends at certain times instead of my tytn and I am desperately looking for an autotext or autocorrect applicaton. Basically, I do a tremendous amount of emails on my phone and this application allows me to type in three letters in an email like "mrq" and have it replaced with "meeting request" or "btw" and replace it with "by the way". I use Kai' autocorrect.net on my tytn and it lets me write emails so much faster.
the xt9 on the dash is an annoyance and does not perform the same function.
Qoolapps makes qcaps and qcorrect, but it only works on the motorola q.
Bumping this up to the top again. If anyone has any suggestions, please help. I really need this.
Bump here --- (AUTOTEXT solutions for WM5/6)
I have used Kai Autocorrect but recently it seems to have issues with some of the WM6 ROM's - can't pin it down so input on that would be great.
But also if there are any other options - it amazes me this is such a simple yet killer app for the BB .... example type bb = Blackberry .. type wm = WindowsMobile.... thxm = Thanks Much!
Not using mouse stylus and all that jazz just on the fly word conversion and completion with a self defined library of words. AutoCorrect again does most but has not been updated in a long time.
Thanks for anything ---
I am confused, too: used it on a Excalibur? I thought it runs only on PPC??
ckolibab said:
I have used Kai Autocorrect but recently it seems to have issues with some of the WM6 ROM's - can't pin it down so input on that would be great.
...
Thanks for anything ---
Click to expand...
Click to collapse
XT9 (DB edit) or Autocorrect alternative.....
Correct -
The issue is the WM6 Smartphone version and PPC versions differ in how they do Autocorrect - which for many is brutal pain..... the PPC version has in /windows a hidden file called autocorrect.0409.txt which can be manipulated to add/delete words from your dictionary and you can control it.
The Smartphone/WM6 since it uses ughhhl XT9 yada it uses a different DB which is apparently tough to edit - manipulate - to anything with.
As much as I wish the Smartphone worked like the PPC, I think I am hoping for a prayer here that won't happen - so I see only 2 options that would get us close to that:
1 - Some way to get control to add/edit change this XT9 DB
2 - An add-in app (which I have asked a Dev to look at but says its rough) to run resident and give us the same as what exists on the PPC/WM6 on the smartphone.
The sad part is all in all I could see the SmartPhone needing this even MORE since it's keyboards are usually smaller any anything to minimize keystrokes is key.
This is so sad --- Anyone that can help I would be so grateful. Even if there is some way to port some of the WM6/PPC ROM components over would be VERY NICE!!!
bump
A call to all developers ... this is the only thing I miss from my BlackBerry ....
Someone must be able to amend either QCaps or MagicKBLite to work?
I don't have the Touch Pro 2 yet but I am trying to help someone out to fix his issue.
Basically his problem is the suggested word feature doesn't work as well as the Original Touch Pro.
Here is his issue. If anybody could help I would greatly appreciate it.
The correct word "também" is correctly suggested if I type "tamb". So far, so good (although on Touch Pro I could type "tambem" and he would suggest "também" also). The problem is with small words like "olá", "não", "é", "há", "ás", etc...
The T9 only starts suggesting words after the third letter.
Does anyone know how to make the T9 start suggesting after the first typed letter? It would make things better, but it would not solve the problem. There are many words that are single lettered: "é", "à", "á", etc..
Click to expand...
Click to collapse
Maybe a registry setting? I don't have the TP2 so I am not able to browse the registry and find it but I figured you guys would be the best help for this issue. Thanks in advance.
Try this...
Dont know if its what you are after, but might be
http://forum.xda-developers.com/showthread.php?t=534126
hope this helps
I think most t9 starts after the third word because just by typing one letter, there are thousands of words that it can be. So when more letters are typed, it narrows down the selection in the dictionary. The only words that might show up quicker is if the TP2 actually stores newly added words into the dictionary.
dfootball56 said:
I don't have the Touch Pro 2 yet but I am trying to help someone out to fix his issue.
Basically his problem is the suggested word feature doesn't work as well as the Original Touch Pro.
Here is his issue. If anybody could help I would greatly appreciate it.
Maybe a registry setting? I don't have the TP2 so I am not able to browse the registry and find it but I figured you guys would be the best help for this issue. Thanks in advance.
Click to expand...
Click to collapse
Hi. I'm the one who wrote the quoted message
Thanks dfootball56!
Let me just add some more info: what madjsp wrote is indeed true. However, on Touch Pro, this never happened... If I typed "esta", the XT9 on Touch Pro would suggest "está", "esta", "estámos", etc... On TP2, "está" only is suggested if I type "est".
This is, if I type the full accented word (without the accent) it does not suggests the correctly accented word...
Hope I'm not being too much confusing...
Thanks for any help!
you've been clear enough! same problem here, very very annoying since in italian accented letters are very common too.. no solutions / hacks / tricks??
that would be great! thaks a lot!
Hi. I'm the one who wrote the quoted message
Thanks dfootball56!
Let me just add some more info: what madjsp wrote is indeed true. However, on Touch Pro, this never happened... If I typed "esta", the XT9 on Touch Pro would suggest "está", "esta", "estámos", etc... On TP2, "está" only is suggested if I type "est".
This is, if I type the full accented word (without the accent) it does not suggests the correctly accented word...
Hope I'm not being too much confusing...
Thanks for any help!
Click to expand...
Click to collapse
Hey man. Figured these guys on here were the best resource of new hacks and tweaks. I'm sure someone will get bored and try to figure something out...haha If I had one now I would search the registry for you but it hasn't came out in the U.S yet
Update: I mailed HTC and they understood and acknowledged my problem. Just hope it was worth the "effort"...
I'm quoting all the mails:
Me: (...) already described the problem
HTC:"Hi Nuno,
The T9 dictionary does not include words with special characters. You can add these words manually, and they will be remembered next time you need them. On the onscreen keyboards, tapping and holding on the letter assosciated with the special character will display all the extra characters for that letter, and you can drag and select them.
Best REgads"
Me: "Hi. Thanks for the fast reply. I'm afraid I disagree with you: the T9 does include words with special characters. I've never added words like "está", "também", "já", and they are there. The problem is that even if I add the word "olá" to the diccionary (not needed because it is already there), the T9 will not suggest it because the suggestions only start after the third letter. I type "ola" and it does not suggests me "olá". However, the T9 of the 'old' Touch Pro that I've got does this correctly: I type "estariamos" -the full word - and it suggests me "estaríamos". On the Touch Pro 2, I would have to type "estar" so it could suggest me "estaríamos". Are understanding what the problem is? I hope I'm not being too confuse. Thanks."
HTC:"Hi Nuno,
I understand the issue now, I do not think I can resolve this for you now, I have forwarded details to our developers for investigation and possible resolution. Please monitor our support pages for fixes and updates in teh future, and I will be back in contact once I have further news for you.
Best Regards"
I then closed the "support case". I think there's nothing much I can do...
Nuno, did you recieve any reply from their side?
great job nuno, so basically we have to wait and pray for them to fix it in a rom update or hotfix... wtf
fadimck said:
Nuno, did you recieve any reply from their side?
Click to expand...
Click to collapse
Yes, I did... you can see what they told me on my previous post.
Unfortunately we just have to wait for a hotfix...
at least they said they will do this hotfix.. it's a good start, now let's hope it doesn'take ages!
Today I found that the T9 word suggestion work's perfectly if I write the messages in portrait mode (without hard keyboard out) and with the "telephone numeric keys" selected...
This is indeed a bug somewhere on the T9 definitions...
Hi.
I worked out a solution!! ;D ;D ;D
I borrowed a Portuguese Touch Pro, copied the following files from \windows
eT9.HQD.kdb
eT9.SQR.Accented.kdb
et9.sqr.portuguese.kdb
eT9ime.dll
KbdNopAll.dll
and then placed them on the \windows folder of the Touch Pro 2
Reboot and DONE!
Good "old" XT9 with the correctly suggested words!!
I've placed the files here, in case someone needs it:
http://www.nunosilva.com.pt/nuno/outras/T9TouchPro.rar
Mind that this is for the Portuguese TP2; I don't know if there are differences from TP2 from other countries.
Thank you all for your help
Well... not that solved after all...
I found out that the Touch Pro has specific keys for these marks:
/ ? + = - _
Meaning: on the Touch Pro 2, I can't write them with the hard keyboard
I also found out that it is only necessary to replace the eT9ime.dll file; all the other are pointless as far as I figured out.
So, to put it back in it's original form, just re-replace the eT9ime.dll file.
Here is the link, in case someone forgot to backup the files before replace them with the files from the Touch Pro:
http://www.nunosilva.com.pt/nuno/outras/T9TouchPro2.rar
Because it is an .dll file I don't really know if it is editable in any way... is someone knows how to do it, please do tell me..
Thanks.
Hey Guys
I am using the following
Radio: 4.49
Rom: WWE 6.5
Operator: T Mobile
I have advanced config, and I saw a thread about tweaking the gps, please can someone explain to me in detail how to do that. Under GPS in advanced config it was mentioned to set log file to No logging , but everytime i chose no logging when i restart the device it goes back to \windows\GPSlogFile.txt
it was also mentioned to delete the old and current log file how can I do that.
Are those tweaks applicable to win mobile 6.5
Look for the Cabs,Tips,Tweaks etc thread stickied at the top of this section
I really feel annoyed by when people tell me look at this or that thread when from my post you can tell that I already did that. I tried to follow the instruction on the tweaks, cabs thread, but got stuck, so please why in this forum specifically every time I ask a question I get these insulting replies.
I think I will abandon my dam HTC TOUCH pro2 and go back to HTC TOUCH HD forum since at least there I get answers. I am really pissed now.
For gods sake respect that we are at least trying to learn, and stop being rude to us, by showing us that we are stupid
I don't know what to tell you. When i got it it took a lot to get a lock so i updated the radio from the official site, installed SeaSGEE (do a search), downloaded the content, used the gps registry tweak ( http://wiki.xda-developers.com/index.php?pagename=HTC_Rhodium/GPS Tweaks ) and the lock is under 2 minutes (although i believe the lock time is horrible compared with the samsung omnia which was 15 seconds).
Hope it helps.
hykhleif said:
I really feel annoyed by when people tell me look at this or that thread when from my post you can tell that I already did that. I tried to follow the instruction on the tweaks, cabs thread, but got stuck, so please why in this forum specifically every time I ask a question I get these insulting replies.
I think I will abandon my dam HTC TOUCH pro2 and go back to HTC TOUCH HD forum since at least there I get answers. I am really pissed now.
For gods sake respect that we are at least trying to learn, and stop being rude to us, by showing us that we are stupid
Click to expand...
Click to collapse
yeah no kidding dude nobuddy has bothered to answer my question about if any custom roms have transcriber and letter recognizer enabled. come on guys lets all be helpful you were all newbies at one time we do our part and SEARCH!! so do your part and HELP!!
sakshaug007 said:
yeah no kidding dude nobuddy has bothered to answer my question about if any custom roms have transcriber and letter recognizer enabled. come on guys lets all be helpful you were all newbies at one time we do our part and SEARCH!! so do your part and HELP!!
Click to expand...
Click to collapse
As far as I can tell .. transcriber and letter recognizer do not come with 6.5 anymore they took it out I Loved it .. but I guess noone used it. )
I have tried installing it .. on 6.5 with NO LUCK ;( If you find a way message me too !
Just found this : http://pocketnow.com/thought/goodbye-transcriber
Handwriting recognition has always been a feature of Windows Mobile that went unrivaled by most other smartphone operating systems. Admittedly, most people either didn't use the feature or didn't know that it existed. About a year ago, we did a tutorial on how to use the features of Transcriber to get fantastic handwriting recognition.
The upcoming HTC HD2 has a capacitive screen, meaning that traditional styli cannot be used with the device. Because of this, HTC has stripped out the Transcriber option, as seen below from the HD2 ROM. Also of note is that there is now only one keyboard option, which is HTC's Touch keyboard. Gone is the small stylus keyboard that we've come to know for many generations of Windows Mobile.
With Transcriber gone, will you miss it?
You don't need to take it personal and get upset.
You should at least consider that the issues you're asking about are not common....so the number of people who know or care about the answer is small. If they were common issues then you'd find many other posts stating the same problem. Do you?
If you've followed the suggestions and the suggestions don't work for you, then what more can anyone say? How much time are people supposed to devote to troubleshooting a problem that only you have?
If you scan down the list of threads, those threads that have 0 responses are either questions that are odd/unique/unknown or have been answered so often that there's a sticky with the answer at the top of the forum...which indicates that the poster isn't even trying to help themselves.
BTW: If I had the answer to your technical issues I'd offer it, but I don't.
WarlockW said:
As far as I can tell .. transcriber and letter recognizer do not come with 6.5 anymore they took it out I Loved it .. but I guess noone used it. )
I have tried installing it .. on 6.5 with NO LUCK ;( If you find a way message me too !
Just found this : http://pocketnow.com/thought/goodbye-transcriber
Handwriting recognition has always been a feature of Windows Mobile that went unrivaled by most other smartphone operating systems. Admittedly, most people either didn't use the feature or didn't know that it existed. About a year ago, we did a tutorial on how to use the features of Transcriber to get fantastic handwriting recognition.
The upcoming HTC HD2 has a capacitive screen, meaning that traditional styli cannot be used with the device. Because of this, HTC has stripped out the Transcriber option, as seen below from the HD2 ROM. Also of note is that there is now only one keyboard option, which is HTC's Touch keyboard. Gone is the small stylus keyboard that we've come to know for many generations of Windows Mobile.
With Transcriber gone, will you miss it?
Click to expand...
Click to collapse
If I read the site you linked to correctly, L3V5Y says the transcriber is a registry setting, but is still in the OS. Anyone know what registry setting would enable it?
I just checked my Tilt2 and it still has transcriber. If you click on the Keyboard icon, it brings up the options. Go to other input methods, and transcriber is one of them. I don't know of any custom roms that have the transcriber, but my Tilt2 rom has it. I haven't flashed anything to my Tilt2 yet, but will be doing so soon. I have flashed a lot of roms to my old Tilt and Fuze, but am really looking to get a stock ATT rom with the BS bloat taken out. I have yet to look at Da_g's, but will be doing so shortly.
And, by the way, I've been a member for about three years, but my post count is low because I do search for things. when I have asked a question, I typically have gotten great responses. The "go search" people are usually smug people with no knowledge, but have seen others write it, so they do too.
My GPS wakes up in <10s in clear skies when it's been on somewhat recently, perhaps 1 minute if it's got stale data.
If your GPS takes forever to warm up, there's something wrong with it. As for the registry entries, you're probably just doing it wrong. Besides, there's zero need for it anyway.
ptgptg said:
If I read the site you linked to correctly, L3V5Y says the transcriber is a registry setting, but is still in the OS. Anyone know what registry setting would enable it?
I just checked my Tilt2 and it still has transcriber. If you click on the Keyboard icon, it brings up the options. Go to other input methods, and transcriber is one of them.
Click to expand...
Click to collapse
What ver of Mobile you have 6.1 ??
In Mobile 6.5 - If I goto Keyboard icon, it brings up the options. I have NO "other input methods "
sad to say .. But true
--------------------------------------edit
Ok .. I am a dumbass I installed Transcriber .. and true it does not give you the option of choosing it from the optons menu ..
However if you find transcriber.exe in the windows dir .. you can run it and it does work !
So I made a link and added it to the startup dir in windows and it works just fine now
Just a warning .. if you change to the full or compact qwerty it closes transcriber and you will have to restart it to make it work again :/
WarlockW said:
What ver of Mobile you have 6.1 ??
In Mobile 6.5 - If I goto Keyboard icon, it brings up the options. I have NO "other input methods "
Said to say .. But true
Click to expand...
Click to collapse
My Tilt 2 (6.5) offers Transcriber, Keyboard, Letter Recognizer, and Block Recognizer. Sorry your ROM is crippled.
WarlockW said:
What ver of Mobile you have 6.1 ??
In Mobile 6.5 - If I goto Keyboard icon, it brings up the options. I have NO "other input methods "
Said to say .. But true
Click to expand...
Click to collapse
I have a tilt2 and both transcriber and letter recognizer (my favorite) are enabled and the tilt 2 does use wm 6.5. i went back to the stock rom after flashing the energy rom because it didn't have it, i just prefer features over speed. i vow not to flash another rom unless it has full handwriting recognition, i for one use it a lot more than the keyboard.
Try Rhodium setting tools by tom cordon
Questions and Answers
hykhleif said:
I really feel annoyed by when people tell me look at this or that thread when from my post you can tell that I already did that. I tried to follow the instruction on the tweaks, cabs thread, but got stuck, so please why in this forum specifically every time I ask a question I get these insulting replies.
I think I will abandon my dam HTC TOUCH pro2 and go back to HTC TOUCH HD forum since at least there I get answers. I am really pissed now.
For gods sake respect that we are at least trying to learn, and stop being rude to us, by showing us that we are stupid
Click to expand...
Click to collapse
Hi hykhleif
I think that you have misunderstood the ethos of this forum. This is a developers forum not a users forum. There is a "Questons and Answers" section in the General section of the forum which you'll see at the top of the main forum page. You may get more detailed help by posting questions there.
I think that if you want "user" advice generally this is potentially not the best place to look but a forum on the HTC website. I think that www.expansys.com has some good user forums as well.
I hope you get your device working to your satisfaction.
Best wishes
andrew-in-woking
Mods,
Not that I am a religious freak or anything like that, not that I object to those who choose to believe in that sort of stuff...
For the record I would like to convey my objection to the tone err attitude err approach err demanding nature of the comments err are we here on this planet to serve this person err is he a reincarnated faro? I move that this thread be removed and our faro friend be given some lessons/guidance on how to communicate in a none aggressive (or pigheaded) way...
We all get frustrated... we all have people in our lives that represent a challenge... our girlfriends/boyfriends all get headaches from time to time... so lets keep a lid on the aggressive nature particularly in this our very fine forum...
PATIENTS is a VIRTUE.
J
simply i apologize to my tone, i was not aggressive but frustrated.
hykhleif said:
simply i apologize to my tone, i was not aggressive but frustrated.
Click to expand...
Click to collapse
Thank you.
I hope you resolve GPS issue. Sorry I cannot help you.
Regards,
J
I presume this is a generic thing, but if it turns out to be ROM-specific (I am running EnergyROM Photon with 6.5) then I can ask in the specific thread.
Unlike with my stock ROM, now I find that I can't add new words in XT9 words. Well, what happens is that it does ask me about adding the word and I can type the new word in, and press the tick, but the word doesn't get saved. The word won't be recognised next time, and if I go into the "My Words" bit it's totally empty.
Is there something I need to do to switch this on ? I tried searching but drew a blank.
*cough* bump *cough*
Same issue with the same ROM - I cannot add words.
Any help there ?
same problem here
I have the AT&T Tilt 2 with the stock ROM and have noticed this same problem. Unfortunately I don't know of a solution.
Goodnight people ...
I have a question for you:
Because I hate the touchscreen keyboard, I wanted to know if there was a way to prevent it being opened automatically!
Let me explain .. when I write a new text message, a new mail, when I use opera but when I select any text box, it automatically opens the touchscreen keyboard!
can prevent this thing from happening?
I only use the HW keyboard ... and would prevent the automatic opening of the touchscreen keyboard!
I dug into the registry, more precisely here:
[HKLM \ Software \ Tegic \ eT9]
and all subfolders below ... I could not find anything about it!
How can I do?
Thanx!!!
Try this:
Code:
[I]HKCU\ControlPanel\Sip\TurnOffAutoDeploy[/I] = 1
[I]HKCU\ControlPanel\Sip\AllowChange[/I] = 0
[I]HKCU\Software\Microsoft\Internet Explorer\Main\Disable Auto SIP[/I] =1 (Note the space in "Internet Explorer"; there's a different directory without the space)
I found these online, so I don't know if they'll work.
Actually, I think only the second tweak ('AllowChange') is necessary. I remember trying it before. You have to know, however, that it will (should) completely disable the virtual keyboard; you can only launch the SIP by changing the value back to '1'.
yeah i used to turn it off with a tweak program. turning off auto works most places but not in opera. however later builds of opera wont show the onscreen keyboard if the physical is kicked out.
thanks for explanation ... really helpful, but my intention was not to completely disable the keypad, but only prevent it opened automatically!
I don't like the on-screen keyboard popping up all the time either. So I took an interest in this thread. I found that of the suggested registry changes mentioned above, the oly one I needed to impliment was this one:
HKCU\ControlPanel\Sip\TurnOffAutoDeploy = 1
This seems to keep the on-screen keyboard from popping up on its own, but still allows me to access the keyboard when I need it.
Hopes this is helpful...
sumflipnol: Thanks for the info!
ciko84xp said:
thanks for explanation ... really helpful, but my intention was not to completely disable the keypad, but only prevent it opened automatically!
Click to expand...
Click to collapse
Whoops! Well, you did say in your first post, "I only use the HW keyboard." Sorry about that.
Maybe you should try ScratchyPDX's route:
ScratchyPDX said:
I don't like the on-screen keyboard popping up all the time either. So I took an interest in this thread. I found that of the suggested registry changes mentioned above, the oly one I needed to impliment was this one:
HKCU\ControlPanel\Sip\TurnOffAutoDeploy = 1
This seems to keep the on-screen keyboard from popping up on its own, but still allows me to access the keyboard when I need it.
Hopes this is helpful...
sumflipnol: Thanks for the info!
Click to expand...
Click to collapse
You're welcome!
It's strange, however, that I have that same exact reg tweak, but my virtual keyboard still pops up on its own (using the ROM in my sig).
I guess, in this situation, YMMV!
ciko84xp said:
thanks for explanation ... really helpful, but my intention was not to completely disable the keypad, but only prevent it opened automatically!
Click to expand...
Click to collapse
its not possible to completely disable the onscreen keyboard. this is only to disable automatic deploy. keep in mind theres alot of places it will popup weather you like it or not.
The Jack of Clubs said:
its not possible to completely disable the onscreen keyboard. this is only to disable automatic deploy. keep in mind theres alot of places it will popup weather you like it or not.
Click to expand...
Click to collapse
I tried one of the tweaks I listed a few months ago. I think the "AllowChange" tweak disables the launch (auto and manual) of the virtual keyboard.
I remember helping someone on an EnergyROM thread about this same topic. He wanted to completely disable the virtual keyboard, so he was happy with the tweak.
ScratchyPDX said:
I don't like the on-screen keyboard popping up all the time either. So I took an interest in this thread. I found that of the suggested registry changes mentioned above, the oly one I needed to impliment was this one:
HKCU\ControlPanel\Sip\TurnOffAutoDeploy = 1
This seems to keep the on-screen keyboard from popping up on its own, but still allows me to access the keyboard when I need it.
Hopes this is helpful...
sumflipnol: Thanks for the info!
Click to expand...
Click to collapse
unfortunately I can not find it in the register of my PDA!!!
I have only [HKCU\ControlPanel\Sip\AllowChange = 0]!!!
The Jack of Clubs said:
its not possible to completely disable the onscreen keyboard. this is only to disable automatic deploy. keep in mind theres alot of places it will popup weather you like it or not.
Click to expand...
Click to collapse
With this tweak [HKCU\ControlPanel\Sip\AllowChange = 0]!!! the problem is solved, because the touch pad is completly powered off!!!
The only one problem, is the impossibility of opening the touch pad when I want without remod this register key and make a SR!!!
sumflipnol said:
I tried one of the tweaks I listed a few months ago. I think the "AllowChange" tweak disables the launch (auto and manual) of the virtual keyboard.
I remember helping someone on an EnergyROM thread about this same topic. He wanted to completely disable the virtual keyboard, so he was happy with the tweak.
Click to expand...
Click to collapse
This Tweak was really useful because I use the touchscreen keyboard 2 times a month! Thanx to you!!!
ciko84xp said:
unfortunately I can not find it in the register of my PDA!!!
I have only [HKCU\ControlPanel\Sip\AllowChange = 0]!!!
With this tweak [HKCU\ControlPanel\Sip\AllowChange = 0]!!! the problem is solved, because the touch pad is completly powered off!!!
The only one problem, is the impossibility of opening the touch pad when I want without remod this register key and make a SR!!!
This Tweak was really useful because I use the touchscreen keyboard 2 times a month! Thanx to you!!!
Click to expand...
Click to collapse
You could just add a DWORD for the "TurnOffAutoDeploy" key. That should suffice.
You're welcome for the tweak, but I understand the problem of having to remod the registry and soft reset when you need it. Maybe you could push for an app that can "switch" the registry key for you without a soft reset?
sumflipnol said:
You could just add a DWORD for the "TurnOffAutoDeploy" key. That should suffice.
You're welcome for the tweak, but I understand the problem of having to remod the registry and soft reset when you need it. Maybe you could push for an app that can "switch" the registry key for you without a soft reset?
Click to expand...
Click to collapse
You're right... I never thought to create the DWORD!
I try now... and then I post the result!
PS: I can create an app that modifies the registry to enable and disable the touchpad, but I think it is impossible to avoid the SR, because without it, the touchpad still does not work even after I edit the registry, because this type of change requires necessarily an SR to become effective.
I've tried to add manually the DWORD "TurnOffAutoDeploy=1", but the problem isn't solved!!!
PS: I can create 2 different CAB... 1 for "Powering ON" and 1 for "Powering Off" the Touchpad... because i'm not a programmer, and i haven't the necessary competence to create an application in c++!
The only one problem, is that i don't know how to avoid the SR necessary to make active the change!
If I find a way to solve the SR problem, i have solved my touchpad problem!
ScratchyPDX said:
I don't like the on-screen keyboard popping up all the time either. So I took an interest in this thread. I found that of the suggested registry changes mentioned above, the oly one I needed to impliment was this one:
HKCU\ControlPanel\Sip\TurnOffAutoDeploy = 1
This seems to keep the on-screen keyboard from popping up on its own, but still allows me to access the keyboard when I need it.
Hopes this is helpful...
sumflipnol: Thanks for the info!
Click to expand...
Click to collapse
Update: After using my phone this weekend with the above tweek applied, I found that the KB still pops up occasionally, but less often than before. For me this is acceptable. You mileage may vary.
ScratchyPDX said:
Update: After using my phone this weekend with the above tweek applied, I found that the KB still pops up occasionally, but less often than before. For me this is acceptable. You mileage may vary.
Click to expand...
Click to collapse
Can you post here the list of the various DWORD that you have in SIP folder of your registry?
I think that you have other settings that I haven't....!
ciko84xp said:
Can you post here the list of the various DWORD that you have in SIP folder of your registry?
I think that you have other settings that I haven't....!
Click to expand...
Click to collapse
Like I said in post6, I have that DWORD in my registry, but it does still pop up. As a matter of fact, the only time it doesn't pop up is when I try to send an SMS!
Mobilnaut SYM
ciko84xp said:
Because I hate the touchscreen keyboard, I wanted to know if there was a way to prevent it being opened automatically!
Let me explain .. when I write a new text message, a new mail, when I use opera but when I select any text box, it automatically opens the touchscreen keyboard!
can prevent this thing from happening?
I only use the HW keyboard ... and would prevent the automatic opening of the touchscreen keyboard!
Click to expand...
Click to collapse
You can try Mobilnaut SYM (http://forum.xda-developers.com/showthread.php?t=459253).
When Mobilnaut SYM is activated, the SIP does not pop up when the keyboard is open.
for my it work with the "Deploy" reg kack. the "allow" one killed it all toghether. I't wouldn't apear, even if i click it.
I have a diferente problem now. I'm Portuguese, I need special char "ç" a lot. my harware keyboard doesn't have that. so I have to pop up the SIP every time just for that one.
Can someaone develop a small app i can link to a hardware button, that all it does is type "ç"?
Thank you!
In this thread you might find the answer
http://forum.xda-developers.com/showthread.php?p=9242765#poststop
There is a registry edit that worked just fine on my T-Mobile HTC HD2, so you might want to check it out.