Hi to everybody, I am a fresh HTC S620 user.
After I bought it, I flashed ookba's rom, it's working great. But my wifi connection isn't working. "Cannot log on to the wireless network. This network requires a personal certificate to positively identify you.". This is the error message.
I searched the forum and also from google but I didn't find a working solution. My network is working with WPA2 protection.
Thanks for all the replies.
From the sounds of it, you need a certificate on your phone. I am not entirely sure how certificates may work on the phone, but google terms like "Windows Mobile Wifi Certificate" or the likes, even search on XDA. I am sure you will come up with something. Like wise, I will search a bit and see if I can find an answer.
Good Luck
Thanks Cyclonezephyrxz7 but I searched about 2 days with a lot of key words, and I tried a lot of ways, I can't solve the problem ):
Could you post some [safe enough to share] info about the wireless router you are using? Possibly some [safe enough to share] connection info.
I am not a WiFi guru or any sort, which is why I put in [safe enough to share], as I leave this to your own discretion. Obviously, don't post your MAC, IP, or data of that sort, as that is not safe to share on an open forum.
Knowing data about your router may help me find a solution for you.
Thank you
my modem has 802.11g wireless connection and using WPA2-AES for protection
and also I tried wi-fi without wpa2 protection, my HTC connects to the internet but with wpa2, it can't connect and also it hasn't wpa protection, only have wpa2 protection.
Thanks for replies.
Well, I did a little Google-searching. Are you using a PEAP connection? If so, refer to this link (here)
In any other case, I will continue to search for an answer, of sorts.
Good luck
change firmware of dsl modem, I have same problem with connection I tried all rom(WM5,WM6.1 WM6.5)but no change, I flashed my modem with different firmware version , now ı can connect wifi with WPA2.
try it may be it solved your problem
mourndare you can test your modem with this program, it is virtual wifi router program.
Program : http://htcexcalibur.blogspot.com/2010/01/turn-your-windows-7-laptop-into-wifi.html
thank you very much dear friends but i can't solve the problem yet
@sincap virtual wifi router needs windows 7, I dont switched to windows 7, still using vista, i will try as soon as possible
Related
Hi
I have a wifi AP at home, and one at work, Both use WPA-PSK with mac addy auth. SSID Visible cause sh1te WM2003SE OS cant cope with hidden SSID.
Get a whole load of oddities from the XDA IIs. Both SSID's and keys are listed in the wifi setup on the device. What I would expect is that if I switch the device on when I am within range of the AP @ work, it connects to it no fuss, likewise, when I drive home, switch XDA on it connects, no fuss, unfortunately this is not usually the case. The following are in order of likelyness to occur!
Problem 1
Sometimes I switch it on, and it sits there searching for eons, never finds AP. If I disable and then re-enable wifi on the XDA then it connects.
Problem 2
Sometimes, the XDA will tell me that its connected to my home network when I am at work - it isn't!
Problem 3
Sometimes I switch it on, it connects to the AP, but no net connectivity - looking. Using PPC Ipconfig, I see that device never managed to get an IP addy. Stop, start wifi problem resolves
Problem 3
Occasionally, the PPC forgets the shared secret, and I have to re-input it, start/stop wifi before it will connect to the AP
Problem 4
Sometimes, it just BLUNTLY REFUSES to connect to the AP if I do the above. In this case I try all the above with a soft reset as well. If that fails then I need remove all the wifi AP's, soft reset, wait (ages) for it to see a new AP, enter the PSK then it will connect.
It also struggles to connect to other APs (wifi hotspots). Things work a whole lot better when there is just one AP involved (i,e not work and home).
Prob 4 occurs once/week, prob 1 occurs every day, others somewhere between. All problems are of course COMPLETELY UNACCEPTABLE for a product that has been released to the consumer.
Nigel
Hello Veledron,
I've a similar problem: at our company WLAN is set up to reqire WPA and authentication with user certificates. Since it is not possible to import user certificates in Windows Mobile 2003 SE "out of the box" I found out how to do that - it is described here
http://www.jacco2.dds.nl/networking/crtimprt.html
a little bit difficould procedure, but it worked - I can see my personal company certificate in the private-certificate store of my MDAIII.
The problem is, that I can't get a connection. WLAN-Manager says "connected", but I can't receive an IP-address - and in the logs of our Cisco-APs I can't see anything from my PDA. What also is a little bit strange for me: the MDAIII does not remember the setting "authentication with certificates", it always switches to "authentication using PEAP"...
any idea?
thanks
Gerald
Hi Veledron & gekap
I too have similiar problem with my netgear router at home. It seems that everytime it connect to the network it will just keep scanning eventhough it prompt that it already connected. It been 2 days and still i cannot manage to connect
Hopefully there is a solution to this problem.
Regardz
shark
There is.... Turn off AP, or move device to location where it is out of range, remove all WiFi profiles from device, hard reset, turn on router. wait (ages) for device to realize that there is a wifi ap nearby, enter PSK, all is well.
There seems to be no pattern to the WiFi failures, I have to do the above maybe twice a week to get it to connect. When the device gets itsself into a poor state this is the only way.
You cant delete an active profile, and the profile list only appears when wifi is turned on (stupid!) hence the need to turn off the AP.
Nigel
Hi Guys,
I manage to solve my wifi problem,
i just add the XDA IIs mac address to my netgear router plus assigned a reserve ip address based on it mac address and was able to connect successfully with no problem. Hope this solution helps.
Regardz
Sharkz
Hi,
thanks for the tips, but all of them are not a solution for me. I do not have any problems connecting to WLANs using WEP or to unencrypted WLANs, but i guess that there are problems with WPA in the PDA2K. I think the guys of you who have succussful connected to a WLAN using WPA have done that using WPA-PSK, not WPA with TKIP as encryption-method and PEAP or certificates as authentication method over 802.1x.
In our company TKIP is mandatory, and it is necessary to use certificates for authentication - this can be done with either EAP-TLS (so called "smartcard or certificate" in the setup-menu of the PDA-2k) or using PEAP. I've troubleshooted this a lot, and I can't see any authentication packet coming to our Cisco-APs from the PDA2K using this methods (I've turned on advanced logging on the APs to see any little bit...).
I fear the worst, that the WLAN-driver of the PDA2K does not support TKIP! Of course WPA is supportet from Windows 2003 Mobile SE, but in my opinion that is not enough - the card driver down the OS must also support the whole WPA-Standard, and it seems to me that the PDA2K driver does only support WPA-PSK. I found an article which can be an explanation of the problem:
http://www.socketforum.com/topic.asp?TOPIC_ID=2924
So I've 2 questions to you:
.) which driver version is installed on your PDA2Ks? (you can find that in the registry under HKLM\SOFTWARE\Drivers\Wavedev - I've: Common: 0.04.01, Device: 1.06.01 GER, DriverVersion: 0.08.00, Patch: 1.00)
.) has anyone of you ever connected to a WLAN using WPA (not WPA-PSK!)?
thanks
Gerald
As a wifier with a pda2k , how does one know if he has been discovered by the network owner and in addition , where he has gone , not to mention the pda's security . My files can't be looked at can they? I need serious security assistance . My personal data may have allready been compromised! Damn .
Thank you.
(I'll just wait here on a secure network till I can secure my 'lil unit
Treat your PPC as if it were a portable computer running on celeron. As of the moment I can only recall maybe 4 known viri for Windows Mobile. If you are an avid WiFi'er as I am, try to browse your unit from your desptop pc without activesync activated. You might want to port scan the PPC as well. I run an FTP and web server on my unit (for my own purposes), and I have never had any files compromised unless I allow it. If you are really that peranoid, encrypt the files you don't want read without your permission.
Well I'm a Mac guy so browsing on a desktop won't happen. I just need to be able to surf annomously and not have the network owner view me or my files.
The netwqork admin will always know you are using the router because the wifi router assigns you an IP address. No getting around that. But it will be highly unlikely that he can access your unit resources unless you have a backdoor trojan running on your unit. If you don't know, google up "antivirus scanner for pocket pc", and install it.
Hey MACGUY have you seen PocketMAC? It could be useful!
SORRY i didnt mean to hijack your thread!
NOMADMAN - you said your are a wifi junky - How do I surf the net from my MDA3 using WIFI. Is appears that I can connect to my belkin wireless router but when I open IE - No page can be displayed and then it asks me to check my settings but then all the new connection settings doesnt include wifi connectivity? HELP!
meatychi said:
...How do I surf the net from my MDA3 using WIFI....HELP!
Click to expand...
Click to collapse
The are all kinds of info already posted here mate. What I would tell you here, I and many others have already posted in the past.
nomadman said:
The netwqork admin will always know you are using the router because the wifi router assigns you an IP address. No getting around that. But it will be highly unlikely that he can access your unit resources unless you have a backdoor trojan running on your unit. If you don't know, google up "antivirus scanner for pocket pc", and install it.
Click to expand...
Click to collapse
Thanks . I installed the viri scanner and found nothing. It maybe that the open AP is being tapped by someone else as well as me , explaining the third MAC address. Can this be possible? It's a ff.ff.ff.ff.ff
Hi guys, I need to know if a Windows Mobile 6 smartphone (e.g. htc s620) can connect to a WPA Enterprise protected network or need some extra software to do that... can someone help me?
Thanks in advance.
In theory all you should have to do is enter the details or pick it up from your list. However, I've been having problems connecting to radius connections as well.
I've followed all the settings, but it's still not working.
I'm using WPA2 AES, PEAP, and I've even downloaded the root certificate for the server.... and still it doesn't work.
Ok, thanks for the reply. Next week I'll try to use that connection (I'm away now) and see how this works even if I'm not so trustful...
@all,
just havin sold my iphone i am missing synching my mails with my pda over wireless, since my belkin n1 wireless router simply doesnt allow my artemis to connect
so, mind you telling me how you connect successfully?!
- which hardware / wlan access do you use?
greetz
Any wireless router will help you connect with artemis. I have used Dlink, netgear and also linksys routers to connect.
TO connect sucessfully, you need to activate wireless on the router. Then enable wireless in your arte using the comm manager. Once the wireless is activitated, try searching for networks.
Regards,
Kailash
thanx,
but i really aint a novice!
I have tried the belkin n1 now for time and time again...it searches, finds the network, asks for the pin...and returns wireless as unavailable again...
this repeats regardless of security settings or anything else i tried
i remember there having been a lengthy discussion on this...just cant find it..
so back to my question:
which hardware does work?
ideally quote your settings as well, please
greetz
have you checked that both the router and artemis are using the same authentication type? WPA/WEP etc
it might be worth checking that your router isnt set to N-Only for connection speed too....cant remember what speeds the artemis supports but B or G are most likely and maybe your router would reject the connection if it's the wrong type...IIRC the 'N' spec is still in-progress so not widely supported yet
Try a D Link DIR-655
thormdac said:
thanx,
but i really aint a novice!
I have tried the belkin n1 now for time and time again...it searches, finds the network, asks for the pin...and returns wireless as unavailable again...
this repeats regardless of security settings or anything else i tried
i remember there having been a lengthy discussion on this...just cant find it..
so back to my question:
which hardware does work?
ideally quote your settings as well, please
greetz
Click to expand...
Click to collapse
You are not alone!!! I bought a Belkin N1 Vision in December to replace an ageing 3Com router and no matter what I tried I couldn't get my artemis to work. Even without any security. Finally sent the Belkin back and got a D-Link DIR-655. It works like a dream. Connected with no problems at all.
Darn, that confirms what i thought for quite some time - anybody intrested in owning an N1Belkin!
Just doublechecked with an old netgear--and it connects right away...
thanx for ur help!
now could we widen the length of compatible routers, pls.?!
greetz
I use a sitecom 300N router and my artemis connects with it without any problem.
Phill
Netgear
Hi, I use a Netgear WNR834B. No problems using WiFi with Artemis.
Setup; WiFi up to 270 MbPs, region Europe, channel 6 broadcasting and the strongest encryption for security.
With all of the ROMs i have used, there were no WiFi issues.
Regards
This may be stating the obvious, and I apologize if it sounds stupid, but has anyone checked for the "wireless mode" on the router ?
Just ensure the router is on "mixed mode", i.e. it supports b/g/n connections...
Hope this helps...
hmm I also have problems with SMC (SMCWBR14S-N2), mixed mode, but not connect with Artemis.. my notebook connect without any problems.
had the same problem with n1. tried and tried last night with luck, removed all settings on artemis dissapointed. gave it another go this evening after booting system up and connected okay after putting in password.
just double check all the router wireless settings and any security settings you have. save any changes and restart the router.
hope this helps
mjm383 said:
had the same problem with n1. tried and tried last night with luck, removed all settings on artemis dissapointed. gave it another go this evening after booting system up and connected okay after putting in password.
just double check all the router wireless settings and any security settings you have. save any changes and restart the router.
hope this helps
Click to expand...
Click to collapse
Well done getting it to work. I thought I tried everything! Perhaps it was the restart that did it. Too late for me to confirm. My Belkin went back to be replaced with the DLink 655. Good router but does slow down with time and needs a reboot every now and then.
Hi everyone!
I'm having kind of a special problem.
I'm an electro acoustic musician and finds the Desire a lot of fun.
My new project is to use its accelerometer etc and for that I need to connect it to my Mac running OSX 10.6.5.
The issue I'm having is that my network (campus ish) won't allow me to open any ports. I don't think it's a good idea to hack it, so my next idea is to create a network between my Mac and my Desire. This network won't have access to the internet.
It also has to be via Wifi since the app I'm using only allows communication through wifi and my java skills aren't good enough to edit the apk.
I therefore run Oxygen 1.0 (GREAT rom btw) which is supposed to accept ad-hoc, and my computers own network does show up when i browse it in my phone.
The problem is that it dosn't connect since it isn't given an ip. I imagine there has to be a solution to this and I'm just not seeing it. I'm also thinking it could be an OSX issue and not really a question for this forum, but I'm pretty sure it should be possible to just make the phone not requesting an internet ip.
I've tried to set a static IP but this won't work ether.
Does anyone have a clue on how to do? I'm quite desperate really. Been searching for a solution online for quite some time and I haven't found the right one. Probably because most people using ad-hoc want it's phone to connect to the internet and therefore not having my kind of trouble. Unfortunately I have no way of connecting my computer to the router with wire since the router is about 400 meters away. Once of corse, but i really need a wireless solution in the long run.
Thanks!
Christopher