Related
Hi all, for the last few months I have tried various Universal ROMs and even various WM5 phones including HTC and HP iPAQ, there are some commond issues which I haven't been able to figure out a permanent solution (work arounds are available though not ideal), these are:
- SIP (System Input Panel), if you install any additional SIP like SPB fullscreen keyboard, Monster SIP etc, every time after you soft reset the device, unless you load them up straight away, you will not be able to load them up after a few minutes (don't know exactly how long) until next reset!! This is a great pain, I have found a SIP changer program which automatically load a SIP after soft reset, but I will really love a permanent solution.
- Bluetooth problem with Tomtom 6 (TT6). With lots of AKU versions of WM5 (apart from Helmi AKU 3.3 I tried so far, haven't tried it with Helmi AKU 3.5 though so I can't be sure with that version) every time I start up TT 6 it asks me to enter the passcode to pair my BT GPS receiver again even though I have done it 100 times already!! Again I have seen this issue on other WM5 devices in addition to Universal so I am wondering if any one has a solution.
Thanks!
kevin.jiang said:
- Bluetooth problem with Tomtom 6 (TT6). With lots of AKU versions of WM5 (apart from Helmi AKU 3.3 I tried so far, haven't tried it with Helmi AKU 3.5 though so I can't be sure with that version) every time I start up TT 6 it asks me to enter the passcode to pair my BT GPS receiver again even though I have done it 100 times already!! Again I have seen this issue on other WM5 devices in addition to Universal so I am wondering if any one has a solution.
Click to expand...
Click to collapse
I've never seen this problem on either my Universal, or my friend's Wizard (which I set up for them).
I don't know if this is the "standard" way, but basically, I pair the GPS device (a BT-77 in our cases), and then setup an outgoing COM port to it, and then simply tell TomTom to attach to that COM port. In fact, I have two BT-77s, one set to COM0 in the car, and a hand-held one on COM4, and I can switch to my heart's content, and have never been asked to re-pair.
Cheers,
Steve.
kevin.jiang said:
- SIP (System Input Panel), if you install any additional SIP like SPB fullscreen keyboard, Monster SIP etc, every time after you soft reset the device, unless you load them up straight away, you will not be able to load them up after a few minutes (don't know exactly how long) until next reset!! This is a great pain, I have found a SIP changer program which automatically load a SIP after soft reset, but I will really love a permanent solution.
Click to expand...
Click to collapse
I know many SIP can not be able load out. Did you solve this? or how to load them with permanent solution?
kevin.jiang said:
I have found a SIP changer program which automatically load a SIP after soft reset, but I will really love a permanent solution.
Click to expand...
Click to collapse
i've installed a hebrew sip but i dont have a problem loading it anytime i want.
although, sometimes i have a problem composing a new text message. the device gets stuck sometimes if the keyboard it not opened when i click "new".
happends only with helmi's 3.5 and with the hebrew keyboard. doesn't happen with default SIPs.
whats te program you found to load the all the SIPs?
is it "SIPz"? (from the same maker of PQz).
I have the same problem with blue thooth and CoPilot I use. The software is iGo. I tried several roms, but after I switch off the GPS and switch it on, it always wants to pair with Uni again.
StevePritchard said:
I've never seen this problem on either my Universal, or my friend's Wizard (which I set up for them).
I don't know if this is the "standard" way, but basically, I pair the GPS device (a BT-77 in our cases), and then setup an outgoing COM port to it, and then simply tell TomTom to attach to that COM port. In fact, I have two BT-77s, one set to COM0 in the car, and a hand-held one on COM4, and I can switch to my heart's content, and have never been asked to re-pair.
Cheers,
Steve.
Click to expand...
Click to collapse
Thanks for the suggestion Steve, I have indeed paired the BT GPS receiver, created the outgoing port as COM4 (actually I also tried other available ones) and point TT6 to it. I have been using this BT GPS receiver for over 2 years with various devices including my good old HP iPAQ H4150. This problem didn't happen with my Universal's original Orange SPV M5000 ROM and it doesn't happen with Helmi's AKU 3.3/3.5 ROM either which is the main reason why I am using AKU 3.3 now.
I have this problem on JWright's i-mate AKU 3.2 ROM, my wife's HP iPAQ rw6828 (WM5 AKU 2.3), my friend's T-Mobile MDA Vario II (HTC Hermes, WM5 AKU 2.3).
vuquan said:
I know many SIP can not be able load out. Did you solve this? or how to load them with permanent solution?
Click to expand...
Click to collapse
No good solution and I am wondering if anybody else knows how to solve it. I have tried hacking the registry to make my additional SIP default and I ended up with my universal not being to boot until a hard reset. The work around is this SIPChange attached, basically you set which one you want as default, then every time you soft reset it loads that SIP automatically before it becomes impossible to load it.
kevin.jiang said:
Thanks for the suggestion Steve, I have indeed paired the BT GPS receiver, created the outgoing port as COM4 (actually I also tried other available ones) and point TT6 to it. I have been using this BT GPS receiver for over 2 years with various devices including my good old HP iPAQ H4150. This problem didn't happen with my Universal's original Orange SPV M5000 ROM and it doesn't happen with Helmi's AKU 3.3/3.5 ROM either which is the main reason why I am using AKU 3.3 now.
I have this problem on JWright's i-mate AKU 3.2 ROM, my wife's HP iPAQ rw6828 (WM5 AKU 2.3), my friend's T-Mobile MDA Vario II (HTC Hermes, WM5 AKU 2.3).
Click to expand...
Click to collapse
I've not had the problem with either of the O2 ROMs, and Ivan's AKU3.5 test ROM - I haven't tried any other ROMs. I unticked the "secure connection" - not sure if that's relevant or not.
I found that only COM0 and COM4 seemed to be available for outgoing ports.
Before you go into TT6 - is the GPS device in the device list, along with the outgoing port set up correctly? Do you switch BlueTooth on and off? I have it on all the time - I'm just trying to think of things that might be different in our configs.
Cheers,
Steve.
I have both TT6 and iGO 2006 on my XDA Exec. The TT6 (and TT5 before that) always worked well with the BT-77 by simply pairing the GPS to the XDA EXEC on a COM port and selecting that COM port in TT6.
With iGO 2006, on the same XDA EXEC, it will ask to pair the BT-77 every time I launch iGO 2006. The only solution I could find was to use Franson's GPSGate to create Virtual COM ports for the BT-77 and to select this virtual COM port in iGO 2006.
StevePritchard said:
I've not had the problem with either of the O2 ROMs, and Ivan's AKU3.5 test ROM - I haven't tried any other ROMs. I unticked the "secure connection" - not sure if that's relevant or not.
I found that only COM0 and COM4 seemed to be available for outgoing ports.
Before you go into TT6 - is the GPS device in the device list, along with the outgoing port set up correctly? Do you switch BlueTooth on and off? I have it on all the time - I'm just trying to think of things that might be different in our configs.
Steve.
Click to expand...
Click to collapse
Thanks for the advise, I have tried unticking "secure connection" as well and it didn't help.
From what I am gathering in the information supplied it looks to be caused by a combination of the BT GPS receiver, the WM5 and the Sat Nav software.
I can't remember what make and model my BT GPS receiver is because I bought it over 2 years ago and back then I didn't care what model it is. Now that I can't tell it from looking at the outside of this thing.
This is a wierd problem as with different combination of the GPS reciver, WM5 and software it may or may not happen. What I was having that problem using Tomtom 6 I tried the GPSInfo shareware and it didn't ask me to pair every time. Very strange, anyway I am alright now with Helmi's AKU 3.3 using COM5 as the port with my good old BT GPS receiver and TT6.
kevin.jiang said:
No good solution and I am wondering if anybody else knows how to solve it. I have tried hacking the registry to make my additional SIP default and I ended up with my universal not being to boot until a hard reset. The work around is this SIPChange attached, basically you set which one you want as default, then every time you soft reset it loads that SIP automatically before it becomes impossible to load it.
Click to expand...
Click to collapse
Thank you so much! it work on my device.
Microsoft are going to release WM6 with the ability to enable (DUN) for legacy devices, I.e. TOMTOM GO series... are there any cooks interested in releasing a ROM with this option enabled?
this would be great. if this was done i would have nothing to complain about with wm6
Same here, it's just the final thing I need for a perfect WM6 ROM.
One vote more
Same, here. I also tried to use DUN on WM6 with TomTom Go. But apparently WM6 lacks DUN support in Bluetooth Stack.
Does anyone have a fix for this or is there any good WM6 Rom out there with Bluetooth DUN support?
Yes-Sir-Eee
I would love to see that, my 910 won't use the services without DUN...
I was browsing earlier and I think I saw a .cab file in the Wizard forums for PAN support in Windows Mobile 6, however I don't think that anyone said that it worked.
Really?
Point me in the right direction & I'll happily give it a whizz...
Cheers,
mccreath said:
Point me in the right direction & I'll happily give it a whizz...
Cheers,
Click to expand...
Click to collapse
I downloaded the CAB from here, and installed on my Wizard. It says it installed but does not work.
Here's some more info:
http://forum.xda-developers.com/showthread.php?t=307235&page=2
I can confirm this fix
Used trinity files posted by MuN on the above thread.
heres what i did
Installed cab - soft reset
pasted all files from zip in windows folder - soft reset
then unpaired tomtom 910 and reparied, hey presto it found DUN support
Perfect, have been waiting for a fix for this
I've run the .cab and copied the files into the Windows directory, however I'm having a real headache trying to configure a data connection.
Which device to choose for TomTom GO 910?
@the.drone
I followed your instructions and now my TomTom reports that my phone has DUN capability. Problem is HTC TyTN or HTC Hermes ist not listed as phone in the phone list and automatic configuration does not work.
Can you please give instructions which phone to use or how to configure the data connection manually? Because DUN support which can't be configured is as good as no DUN support.
Thanks a lot.
Marc
it just worked first time automaticaly with mine, maybe i was just a fluke but it found the data coonection first time on 3g
How can I find out my TomTom thinks my phone has DUN?
Edit: when I try to add my TomTom to my Hermes, it only brings up a handsfree tick box, when in Windows Mobile 5 I think it also brought up two additional tick boxes. Any ideas if this is following the path to success of if I've screwed up?
Double post.
DUN Doin' it
Will be giving it a go first thing in the morning.
Cheers for the update, will post results....
Bargain!
You eff-ing ROCK... DUN on WM6.
My TomTom 910 loves you!!
Hoo-haa!
How did you get it to work?
So can someone share how they did it?
I followed the instructions and it now finds my ttg 300, and says it has the services - but can't set up the actual DUN connection either manually or automatically!
Any ideas?
Matt
I really am sorry to be a pain in the butt, but I'll outline what I've done.
1). Paired my Hermes up with my TomTom 910.
2). Run the .cab.
3). Soft reset.
4). Copied the files into the Windows directory of my Hermes via the storage card.
5). Soft reset.
6). Repaired my Hermes and TomTom 910 after having deleted the previous connection. At this point it says "The following features were found: Hands-free calling, Wireless data connection, Phonebook".
At this point I try and setup a data connection that it hits the fan. It's really annoying because it feels like I'm falling at the final hurdle. I also wondered if I was struggling because of an issue with connecting to the T-Mobile network, however am I right in thinking that mccreath's using a T-Mobile GPRS contract SIM connection?
Upgrade went fine, used the v24 w/ opera version, but have a couple issues.
Biggest issue is that Bluetooth file transfer doesn't seem to work anymore with my iMac. I try to initiate a transfer and it says " there is already a transfer in progress", even after a soft reset, re-pairing, etc. It also says " your device appears to not support this feature", but it worked fine with WinMo 6.0, which came preloaded out of the box. I mostly upgraded for the performance and sliding panels, but the bluetooth issue is annoying.
The other problem is that Opera just won't install from the "my extras" menu. Also, my JOGGR randomly acts crazy, flipping between links on an IE webpage, only a soft reset fixes it
Any insight?
Install the latest Kavana ROM and stay away from the bloated "v24" version
I have WM6.1 V24 Ricky. My Bluetooth works just fine. In fact I'm posting wirelessly via a T-Mobile Dash Bluetooth PAN connection to a network server that feeds internet to all network devices, including the computer I'm typing on. So I don't think the problem is V24.
If you have a Broadcom BT adapter you may want to go to http://broadcom.com and download the latest BT drivers. I did this and it helped my server which was running 100% CPU with the old drivers. Updating the drivers also incidentally increased the BT PAN connection speed from 700K to 2000k (2Mps).
Hello,
I have really a strange issue. I am unable to "beam" the images from Touch HD to Bluetooth enabled PC using Bluetooth. I tested against two PCs and it never worked. The activesync works ok. But i don't want to use activesync... as it's a bit of overkill - i am looking for a out of a box solution that will possibly work with every pc everywhere... last time i ended up with mailing the images by email =))
Both sides have bluetooth enabled in visible mode, i am using either resco or wm file explorer beam function, then the list of visible bluetooth devices appears, but when i select the PC it always fails. =((
I remember there was some issue of "too much services pc provided", but i am unable to remove services provided by the pc i have no use for as FAX for example. On both PCs there's bluetooth stack by Widcomm, once branded for IBM and once for HP.
I have a PC with integrated bluetooth module and a Microsoft driver. If I right click on the Bluetooth icon in the system tray (lower right near clock), I can select "receive a file" which brings up a little wizard that waits for you to beam your picture. Maybe your Bluetooth device also has this software. I use ActiveSync for several pictures because in the long run it's quicker.
PGMMA, yes, but this is about widcomm driver... not ms... =(
Activesync is OK, but won't work on a PC without Activesync - i had an issue, when i want to send a image/file to a friend. No luck. The Bluetooth Stack Tray icon gets green for a sec, then white again with no message what so ever.
The other computer now requires pairing all the time, but i am sure i can handle that later. =)
Well i tested dryar 1.6 (i was unable to find the version 2.0 which should be on dryar.com) without a luck, but was able to make at least part of the bluetooth ftp explorer working (HTC_BT_FTP_Explorer_1.2.30489.cab)
i can share my files on cell phone, but i am unable to browse others after installing this file (couldn't enable the explorer in the ftp tab), when i click the icon in programs nothing happens.
anyone has a bt explorer fully compatible with blackstone / touch hd?
tried all versions from here, but simply \windows\btftpclient.exe won't start =(
http://forum.xda-developers.com/newreply.php?do=newreply&noquote=1&p=3121049
identically problem
There is NO working BT Explorer client for the Touch HD. I called HTC 2 weeks ago about this issue. They said that it's not supported with the current ROM, but they did say that they are building a new ROM to be released shortly & it WILL have BT Explorer support.
Vampire2800 said:
There is NO working BT Explorer client for the Touch HD. I called HTC 2 weeks ago about this issue. They said that it's not supported with the current ROM, but they did say that they are building a new ROM to be released shortly & it WILL have BT Explorer support.
Click to expand...
Click to collapse
I did attach the BT explorer that I using.
BT Explorer
Hi, So could you tell me did they fixed the problem, becouse my Bluetooth Explorer on HTC HD wouldn't start. I mark strat using BT but after click ok it's still unchecked !!! so finally is it solved this or not becouse it's a really disapointed accourding the price of this device.
Thanks
Vampire2800 said:
There is NO working BT Explorer client for the Touch HD. I called HTC 2 weeks ago about this issue. They said that it's not supported with the current ROM, but they did say that they are building a new ROM to be released shortly & it WILL have BT Explorer support.
Click to expand...
Click to collapse
gpaunescu said:
I did attach the BT explorer that I using.
Click to expand...
Click to collapse
It didn't work here? I got only the wait cursor for 2 seconds and nothing else...
SOLVED!! with help of kwbr,releasing his t8282 kitchen, btftp version is 1.2.37656.91, searching internet ,i find cab, it's simply to find :
h%ttp://ishare.iask.sina.com.cn/f/22305165.html
thank you kwbr
I currently have a Diamond and TP2 with stock ROM's.
Diamond worked perfect with carkit untill i performed major ROM upgrade from htc.com. now it will connect and not reconnect on either device or carkit restart.
My TP2 behaves EXACTLY the same - connects and drops after either restarting. when connected it works fine - voice/dialing etc etc.
My car kit is a JVC KS-BTA200 connected to my KW-AVX810 head unit.
i've read all comments on google/xda's etc - well almost all! to no avail.
the devices are all set to visible obviously and all paired. ive read that a registry edit possibly fixes the issue but my TP2 & Diamond dont have the required reg strings. (that i can find!!)
i have the remote registry tool installed on my Desktop - so im ready to make changes!
please, if anyone can help i will very grateful!!
radak23 said:
I currently have a Diamond and TP2 with stock ROM's.
Diamond worked perfect with carkit untill i performed major ROM upgrade from htc.com. now it will connect and not reconnect on either device or carkit restart.
My TP2 behaves EXACTLY the same - connects and drops after either restarting. when connected it works fine - voice/dialing etc etc.
My car kit is a JVC KS-BTA200 connected to my KW-AVX810 head unit.
i've read all comments on google/xda's etc - well almost all! to no avail.
the devices are all set to visible obviously and all paired. ive read that a registry edit possibly fixes the issue but my TP2 & Diamond dont have the required reg strings. (that i can find!!)
i have the remote registry tool installed on my Desktop - so im ready to make changes!
please, if anyone can help i will very grateful!!
Click to expand...
Click to collapse
Hi, I am using my Touch Pro 2 with the same HU and Bluetooth adaptor as you but no such problem so far.
It used to have this problem then I try to connect using Window CE as the phone setup and choose another Connection Key instead of default 0000 to pair the phone with the HU.
ok, well i just tried connecting via searching for the device from the HU. it finds my device - i tap enter (to connect on HU) then it just jumps to a blue flashing 'connecting' then goes to a yellow 'error' straight away. if i select 'open' on the HU then it connects (connecting with a different ID - a number '6') but only untill i restart the HU.
also as a test i just tried an Xperia (just had one laying around LOL) and it does the exact same as mine!! ARRRRGHHH!
so im glad to say i believe it is not an HTC issue!
ok so i have an update - the problem is my HU will not pair correctly and it will not store a pairing. great.
another quick one - have found others are having trouble with their HU/adapters. thanks anyway everyone!
TP2 Bluetooth and voice dialing working fine ???
Have you tried to reset your carkit? I had the same problem after the rom-update with my TP1 and I put my carkit (Bury CC9060) back to factory settings. So I did the same this morning after I updated my TP2 and now it works just like a charm. Of course I don't know if your carkit has this possibility. Good luck, greetz Ton
'iznogoooog' - yes it work perfectly until you restart either device - 'ton66' - unfortunatley a reset is pretty much all i can do!!! eeeeek!
hopefully a reset will fix it! - i did unplug my b/tooth adapter then switch the unit on - then off then plug it back in.. didnt change anything.. oh well! will do complete re-set 2day!
BTW:
thanks so much for everyones help!
Got a questions. I am using the AVX-826 with build in Bluetooh. I want to know if you guys get the Signal Strength show on your Head unit is correct. on my unit pair with TP2. The Signal Strength indicator doesn't move. it always show the strength with my phone is connected to the unit and it stay that way.
The Battery Strength indicator does work and show the correct battery level.
I have exactly the same prob!
Hi,
I have a AXV800 and a BTA200.
My first device was a Artemis with WM6.0. No problem so far!
Then I changend to a Diamond with WM 6.1 and had the same problem as mentioned before. Now I tried my new TP2 and still the same problem.
And I tried the old Artemis again with a new 6.1 ROM and the same problem as on the other two phones.
Now I think it depends on the WM build. 6.0 seems to work 6.1 not!!!!!!!!!!
I did a reset on my AVX800 two times without luck!
I think I'm going to use a normal phone without Windows mobile for the next test!
Schelbi.