Develop Bugs

BA Screen Resolution Hack (960 X 1280 dpi) at 268288 colors

Oh **** ... it didnt get in ....
sorry folk i forgot to zip it up before attaching.
there you go ...
btw ... i'm already using the hack ... no side effects at all ... just a more beautiful screen !!!!

Tis is how i got the numbers
16 bit = 64K = 65536 colors
1 bit = 65536/64 = 1024 colors
18 bit = 262K = 268288 colors (262 X 1024)

Does it work for Blue Angels

Re: Does it work on Blue Angels ?
The answer is "YES !"
I am using a Blue Angel with This Hack and I'm very happy about the result !!!
Try .... If u wanna revert just jot down the values so u can key them back in.
I never thot it was possible but by heaven's will I chanced upon the genius who discovered it .... i lost the link but lucky i saved it as mht. file.
Now i want u all Blue Angels out there to have the same beautiful screen i am enjoying !!!
Cheers Mates
One for all and all for One !!!

Danger !
Please don't try going above resolutions more than 18 Bit
Although it is possible to do it ... there's no guarantee that the hardware can support resolutions that high .... if your pixels start dying it's your own fault.
18 Bit is safe and good enough .... don't kill the screen by overdosing it !!!
___________________________________________________
One for all and all for one

Would someone be kind enough to post a guide on how to do this in their own words?
I've tried both apps suggested and also replaced the files but nothing seems to work.
ozVGA's files already exist in /windows and wont let me overwrite them, and when I start up SE_VGA it opens a dialog box without any text and when you close it the closes the app.

Biohead said:
Would someone be kind enough to post a guide on how to do this in their own words?
I've tried both apps suggested and also replaced the files but nothing seems to work.
ozVGA's files already exist in /windows and wont let me overwrite them, and when I start up SE_VGA it opens a dialog box without any text and when you close it the closes the app.
Click to expand...
Click to collapse
I agree with Biohead, instead of reading long info from the link on you rar file, why don't you just give us step by step how you make it worked on yours.
TX

here it goes .....
HKEY_LOCAL_MACHINE\Drivers\ Display\Active\Built In LCD
In "LCDcolors" Enter Decimal Value 268288
HKEY_LOCAL_MACHINE\Drivers\ Display\Citizen
In "CxScreen" Enter Hexadecimal Value 30
In "CyScreen" Enter Hexadecimal Value 30
Install OzVGA
These are the settings I use ...
ozVGA
MEnu&Bar Font 650 (Checked)
System Font 700 (Checked)
Hor. Scrollbar 10
Ver. Scrollbar 10
Min Scrl Thumb 10
Fonts Arrays :
SEvga : 500,600,650,800,1000
SEvga : 750,900,975,1200,1500
oz=SE* Ratio 2
Soft Reset
Goto Start/Settings/System/Screen
Set the font size to (Smallest)
As has already been pointed out, a lot of applications don't take into account the system-level font sizes in the Registry. Also, the vast majority of them doesn't check for the actual size of the screen to give you exactly the same view in VGA and in QVGA. (The most notable exception is the excellent document reader application, µBook , which offers the same resolution in both QVGA and VGA modes.)
View the screenshots below for an idea of wat it'll look like.

:shock: Can Someone please tell me why my screenshots don't show up in this page ?????
:shock:
:?: :shock: This Page Does Not support JPG files ????? :shock:

Today Screen

hardware?
friends, do our blueangels' lcd hardware support that resolution? Or is it just a programm tweak and is not a real resolution enhance?

i have no idea at all whether the hardware supports the resolution ... but the OS definitely allows for different resolutions.
Does anyone have any idea how to check if it is real ???
The only way i know how is to compare the same screen with same brightness settings against another device which is 18bit screen ... like the BenQ P50.
If anyone can do it ... please post your findings Thanks
I can only afford 1 device ... I am Poor

Thanks for the setp by step info...Iam going to try it...so it is safe to modify all the setting right?

yes it is absolutely safe ... just remember your original settings so you can key them back in if you want.

Hi Ivan, I have try it, not working so good, and the text are mixed up, even after changing the setting to the smallest, and the resolution remain the same, yes I follow your step by step, Thanks anyway.

Oh dear ... Sorry about that ... But the prospect of having an 18bit resolution blue angel would really have been a dream cum true ...
I'll experiment some other settings and post it for u guys can try ...

Will it work with a Blueangel running WM5?
Thanks.

I got no Guts to flash my ROM ... So I dunnoe if it work on WM5
But it seems quite safe to change the values back and forth ... it only affects how your screen displays stuff ... if you don't like still can go back to original settings ... I'm still experimenting

Need someone with WM5 to have the guts to try it and tell us his views.

I'll do it, but someone will REALLY have to create a really basic guide. I've never really gotten into modifying the Windows Mobile thing so I'm not 100% whether I'm doing it right.
If someone creates a 100% step by step guide then I'dbe more than happy to try it out. I understand WHAT I have to do, its just HOW to do it.

Adjust Touchscreen Sensitivity

In WM5 there was a registry entry that determined the sensitivity of the touchscreen. I found it useful to increase the sensitivity since I use a screen protector.
Now I'm using WM6, and that registry key doesn't exist. Anybody have a clue how it can be done?

Would be interested in this too

TheForce222 said:
Would be interested in this too
Click to expand...
Click to collapse
What he said ^^^

any one care to share if u know this...i find the touch sensitivity is not very good...i always have to press twice to get it right

I always thought that this was a big problem in porting the TouchFLO things to the Hermes, because the hermes doesnt have a pressure-sensitive Touch Screen?
but hell, prove me wrong

swedbass said:
In WM5 there was a registry entry that determined the sensitivity of the touchscreen. I found it useful to increase the sensitivity since I use a screen protector.
Now I'm using WM6, and that registry key doesn't exist. Anybody have a clue how it can be done?
Click to expand...
Click to collapse
What is the tweak for WM5? Can you share it with us?
I have not heared about it before.
I also need it as I use screen protector too.
Thanks and regards

Isn't the sensitivity adjusted when you do the screen alignment in Settings -> System -> Screen according to your pressure?

swedbass said:
In WM5 there was a registry entry that determined the sensitivity of the touchscreen. I found it useful to increase the sensitivity since I use a screen protector.
Now I'm using WM6, and that registry key doesn't exist. Anybody have a clue how it can be done?
Click to expand...
Click to collapse
Is it top secret that you do not want to share ?
What is the tweak in wm5 please ?

HKLM/SOFTWARE/Drivers/Touch
Inside there is a key named 'Pressure Threshold' which you can modify (remember ONLY to increase it, decreasing it may result a non responding touchscreen)

jolas said:
HKLM/SOFTWARE/Drivers/Touch
Inside there is a key named 'Pressure Threshold' which you can modify (remember ONLY to increase it, decreasing it may result a non responding touchscreen)
Click to expand...
Click to collapse
Thank you very much
Regards

jolas said:
HKLM/SOFTWARE/Drivers/Touch
Inside there is a key named 'Pressure Threshold' which you can modify (remember ONLY to increase it, decreasing it may result a non responding touchscreen)
Click to expand...
Click to collapse
I Flashed i-mate WM5 Rom and the Reg Key dos not exist.
Can you tell me exactly the path and values
Thanks and regards

shafez said:
Thank you very much
Regards
Click to expand...
Click to collapse
Go to HKLM/Drivers/TouchPanel/Pressure Threshold (Tested on HTC Touch)
I changed from 11000 to 12000 for testing and I feel some sensitivity icrease. I thought a lower figure would rather increase it because it is a threashold? Others should test and give feed back

i tried to look for this and cant find touchpanel, any ideas??

kidd78 said:
i tried to look for this and cant find touchpanel, any ideas??
Click to expand...
Click to collapse
Try
HKEY_LOCAL_MACHINE\Drivers\TouchPanel
and u should find it.

I do not have this on the Offical Release there is no HKLM/DRIVERS/Touch
sorry maybe its just not an option unless someone else can find it? I'll do some more looking soon,

yup no touchpanel on this so bit stumped here

victoradjei said:
Go to HKLM/Drivers/TouchPanel/Pressure Threshold (Tested on HTC Touch)
I changed from 11000 to 12000 for testing and I feel some sensitivity icrease. I thought a lower figure would rather increase it because it is a threashold? Others should test and give feed back
Click to expand...
Click to collapse
KEYWORD THERE: TESTED ON HTC TOUCH
The Touch has a different Touchscreen than the TyTN ALLOWING for Pressure Sensitivity.
The Hermes has no such screen, its either touched, or not.
not touched at what pressure
sorryy

my default value is decimal 9175....how come ur is so high 11000??anyway i changed mine to 12000 also...i dont feel any difference at all on my touch...sad

stan23 said:
Isn't the sensitivity adjusted when you do the screen alignment in Settings -> System -> Screen according to your pressure?
Click to expand...
Click to collapse
Anyone know if this is true?

if this dos not exist in the hermes registry then why is it in the hermes forum? this is more than confusing. I don't understand why people with the HTC Touch/Elf are posting there results here. maybe it came up on a search and they didn't relize this was the hermes forum? in any case MODS should move this if there is nothing relivant to the hermes.

decrease screen brightness of omnia 7

is it possible by a registry hack or something?
if not, do you think it'll be ever viable?
didnt find anything with google,...

have you tried settings > brightness ?

still way too bright.

if anything is ever found, it will be posted here. i would ask for it, just in case thres no one already looking into it.
http://forum.xda-developers.com/showthread.php?t=907971

HI, i downloaded about two weeks ago registry editor from the website TouchXperience for my samsung omnia 7. I was searching registry and i found the option where you can set minimum and maximum brightness, as i remember it was 0 - 25.. Just download registry editor, hit the search button when you are in menu and search for brightness.. It will come up with this string..
Please note, that i didnt try it but it is definitely there..

yeah the SAMOLED is definetly too bright for my eyes too, but you need to know that you won't see a damn thing on it under sun light if you'll lower it..

thanks!
can you tell me which value exactly i have to change, noodles?
dont wanna f* up the phone...

i changed some values of min & max, but it had no effect on the backlight apparently ....
maybe one has to tweak the other parts of this registry sector.

[MOD] reg edit to get higher resolution so metro apps will work

When I first installed windows 8 I was really confused with all the metro app icons, when i clicked on them nothing happened. I started thinking they were fake and were placed there for looks. I searched all over the place and found that if your resolution is not high enough the apps wont load.
so, here is a regedit i found a long time ago to activate 1024x768 and 1152x864. seems like 1024x768 is the lowest resolution that is needed for metro apps to work.
1) Run regedit
reg edit can be found in the windows folder
2) highlight the higest tree level (Computer)
3) Search for “Display1_DownScalingSupported” and changed it from “0″ to “1″
3b)some have reported that there may be more then one entry that needs to be changed so make sure to search the entire registry
4) Restart the system
5) Enjoy the two new resolutions: 1024×768 px and 1152×864
the metro apps will work now.
I'm using a lenovo s10-3t but this should work on many other computers.

I could just change the resolution in the normal Windows 7 way...

Me to but my problem is that I have an eeepc 1000h which supports max 1024x600, what I have to do in this case...

I have a Acer netbook and have the same problem. I did try the apps with an external monitor which worked fine.

tim149 said:
I have a Acer netbook and have the same problem. I did try the apps with an external monitor which worked fine.
Click to expand...
Click to collapse
You have to hack the registry to enable a higer resolution, I created a reg file for you, download it, double click on reg file, click yes and restart, now check your resolution settings.If this dosen't work try this:In regedit search with ctrl+f for Display1_DownScalingSupported and change the value from 0 to 1 and keep searching until you reach at the end of registry because are 4 or 7 with "Display1_DownScalingSupported" name, restart and check your resolution settings.
All the best

craiglay said:
I could just change the resolution in the normal Windows 7 way...
Click to expand...
Click to collapse
yes you can change it that way, but for me and many others the max will be 1024x600 and we won't be able to go anyhigher with out the regedit. So after the regedit those 2 higher resolution options will be available. then we will be able switch to them "in the normal windows 7 way."
I think this problem is prominent on smaller laptops or netbooks that have10in screens or smaller.

hi,i have lenovo S10-3t too,,,when i have a resolution higher than 1024x600,metro apps working,,,but on original resolution 1024x600 non working,,,is it possible that metro apps will working on this original resolution ?thankx

rshabou said:
When I first installed windows 8 I was really confused with all the metro app icons, when i clicked on them nothing happened. I started thinking they were fake and were placed there for looks. I searched all over the place and found that if your resolution is not high enough the apps wont load.
so, here is a regedit i found a long time ago to active 1024x768 and 1152x864. seems like 1024x768 is the lowest resolution that is needed for metro apps to work.
1) Run regedit
reg edit can be found in the windows folder
2) highlight the higest tree level (Computer)
3) Search for “Display1_DownScalingSupported” and changed it from “0″ to “1″
4) Restart the system
5) Enjoy the two new resolutions: 1024×768 px and 1152×864
the metro apps will work now.
I'm using a lenovo s10-3t but this should work on many other computers.
Click to expand...
Click to collapse
you mean like Paintplay and piano??
I got em to work after installing windows 8 and run em, simply no regedit at all,
anyway good stuff, i thumb this one up

majkicimo said:
hi,i have lenovo S10-3t too,,,when i have a resolution higher than 1024x600,metro apps working,,,but on original resolution 1024x600 non working,,,is it possible that metro apps will working on this original resolution ?thankx
Click to expand...
Click to collapse
They wont work on the original resolution, from what I have read. Maybe in the beta release or the final they will support a lower resolution. But as of right now this is the only way.
---------- Post added at 06:34 PM ---------- Previous post was at 06:31 PM ----------
SWEATTAIMI said:
you mean like Paintplay and piano??
I got em to work after installing windows 8 and run em, simply no regedit at all,
anyway good stuff, i thumb this one up
Click to expand...
Click to collapse
Ya, all that stuff. The only things that worked after the install were
Desktop, control panel, and the windows explorer icons.
What kind of computer did u install it on?

I installed the reg file and restarted but the highest resolution I can select is still 1024 by 600. I am doing this on an ideapad s10-2. I opened reg editor and found display1...it had a value of 1.Is there anything else I can try?

ssenbonzakura said:
I installed the reg file and restarted but the highest resolution I can select is still 1024 by 600. I am doing this on an ideapad s10-2. I opened reg editor and found display1...it had a value of 1.Is there anything else I can try?
Click to expand...
Click to collapse
Did u restart? Also did u search the entire registry for "Display1_DownScalingSupported" ?

rshabou said:
Did u restart? Also did u search the entire registry for "Display1_DownScalingSupported" ?
Click to expand...
Click to collapse
Yes I restarted. I did ctrl+f and searched for Display1_DownScalingSupported. It only gave me one result. When you say search the entire registry is that what you mean?

Worked perfect on my acer aspire one zg5. After I finally got the display drivers to install.
Installed reg file from this thread. Didnt do the trick. Searched registry and found 3 more, changed to 1, rebooted and bam extra screen resolutions.
If anybodys having problems installing drivers for acer AOA150(zg5) pm me and Ill link to the proper drivers. Tried a bunch and this one is the only one to work.

ssenbonzakura said:
Yes I restarted. I did ctrl+f and searched for Display1_DownScalingSupported. It only gave me one result. When you say search the entire registry is that what you mean?
Click to expand...
Click to collapse
After the first result hit again ctrl+F and do another search,change the value and repeat this step until you get a message which says you reached at the end of the registry (something like that).

khrisstyan said:
After the first result hit again ctrl+F and do another search,change the value and repeat this step until you get a message which says you reached at the end of the registry (something like that).
Click to expand...
Click to collapse
Looks like I can't get it to change on mine. Searched the entire registry too. I can only change it to 1024 by 576. Thanks for the help

ssenbonzakura said:
Looks like I can't get it to change on mine. Searched the entire registry too. I can only change it to 1024 by 576. Thanks for the help
Click to expand...
Click to collapse
ok..try this: Uninstall the software and driver of the video and restart, now go in Control Panel>Device Manager and install the driver of your video manually, after this, hack the registry and restart your notebook,check your resolution option.This is all I can do for you
All the best

khrisstyan said:
ok..try this: Uninstall the software and driver of the video and restart, now go in Control Panel>Device Manager and install the driver of your video manually, after this, hack the registry and restart your notebook,check your resolution option.This is all I can do for you
All the best
Click to expand...
Click to collapse
This worked for me.

Hi, is there a way increasing or RATHER changing the maximum screen resolution from 1280 by 768 to 1366 by 768 via regedit, i have an ep121 slate, but would like to be able to use the docking app system on window 8?
Help Help PLEASE.

manmute98 said:
Hi, is there a way increasing or RATHER changing the maximum screen resolution from 1280 by 768 to 1366 by 768 via regedit, i have an ep121 slate, but would like to be able to use the docking app system on window 8?
Help Help PLEASE.
Click to expand...
Click to collapse
+1!!! Any hacks? It seems, none of the resolution available not working for me...
Sent from my LG-P500 using Tapatalk

reeg420 said:
Worked perfect on my acer aspire one zg5. After I finally got the display drivers to install.
Installed reg file from this thread. Didnt do the trick. Searched registry and found 3 more, changed to 1, rebooted and bam extra screen resolutions.
If anybodys having problems installing drivers for acer AOA150(zg5) pm me and Ill link to the proper drivers. Tried a bunch and this one is the only one to work.
Click to expand...
Click to collapse
I want.. have the same netbook as yours, and give me your reg please.

Registry tweak: Change responsiveness of keyboard

change Keyboard Responsivness when Typing
HKCU\ControlPanel\Keybd Change InitialDelay from 144 to eg.100, or any value higher or lower

What exactly does this do? Because I played around with a lot of settings and didn't notice any change. BTW this is a DWORD value and if you choose to play with it REMEMBER the initial value. (375 Dword = 177 for Surround Owners)

Laquox said:
What exactly does this do? Because I played around with a lot of settings and didn't notice any change. BTW this is a DWORD value and if you choose to play with it REMEMBER the initial value. (375 Dword = 177 for Surround Owners)
Click to expand...
Click to collapse
if did not notice any change means the values are defaulting back to original. u need a rom and registry editor that works
i know mine works because ei see changes...one way to find out if anything is working is to disable gpu renderer for internet explorer . u will notice emails with rich text will not show up. then cange the value back again
my hd 7 says 144 value as default. i noticed the keypad in samsung phones are smoother,
so a good value for htc phones as i just tried is 200

HI
There is already a thread for registry tweak!!
why you create new thread for just one key......
http://forum.xda-developers.com/forumdisplay.php?f=606
read the bottom of post!
"this thread will be updated as soon as we have identify or found new entries.
Please submit any Registry Tweak you have and I will update the 1st post.
thanks
"

Magpir said:
u need a rom and registry editor that works
Click to expand...
Click to collapse
I am running DFT v4 and my registry editor works and value stays at what I set after a reboot, but can't really tell any difference. Perhaps just me.
I think Xboxmod was attempting to link to This thread which has a lot of registry tweaks. =D
Perhaps someone will have use of this though. Grats on finding the entry

Another BAttery Increase
HKLM\Drivers\BuiltIn\Battery\
Set "PollInterval" to 20000 from watever value is there.

Magpir said:
Another BAttery Increase
Click to expand...
Click to collapse
Looks like you just had discovered msdn site for yourself. That's good. But only that! All posted by you registry "tweaks" (here and in another thread) are well known since .... hmmm... Pocket PC 2002 (codename Merlin) - released at the end of 2001....
What kind of increase? You don't increase or decrease anything by changing this!!!
This digits only change the poll interval!!! That means - you only change how often does the power controller check the battery voltage level!
The meaning is in milliseconds.
The regisrty has a lot of different values and keys. Are you going to start separate thread for each of them?
Stop opening useless threads!