Hey Fellas,
My first time ever using a cooked rom, but I love it. I just installed BSB 6.5.1 on my diamond, and am never looking back.
The only thing that I have with it, is that I dont really like the easy input keyboard, i never use t9, and it just doesnt work for me. are there any cab files around with various keyboards?
Thanks
trev
Use the Finger keyboard 2.1.
I've never seen anything better than this (thanks guys, good job).
http://forum.xda-developers.com/showthread.php?t=501122
actually nikoan's ezinput 2.1 is as much as good as the finger keyboard. By the way, it's the ported htc touch input and i find it vv good
swype
i'm using swype. i was using finger keyboard for a long long time and still use it sometimes, but having to click each letter is sooooo ancient now. 8)
i was going to upload the cab here but now im not finding it on my computer...must be at work. you can search for it on this form.
peace.
Related
And the horses are off:
http://www.theunwired.net/?item=input-pocketcm-sip-keyboard-for-thumb-use-with-htc-touch
mmicha said:
And the horses are off:
http://www.theunwired.net/?item=input-pocketcm-sip-keyboard-for-thumb-use-with-htc-touch
Click to expand...
Click to collapse
you can go to:
http://www.pocketcm.com/dl.php
and Download PocketCM Keyboard
it is free
enjoy
edward
has this software been tested on the hermes with wm6??
yes it works perfectly. ive been using it since yesterday and its definitely much better than the pre-installed default keyboard. i especially like the way it auto-corrects my frequent typo's
tiptoekirk said:
has this software been tested on the hermes with wm6??
Click to expand...
Click to collapse
works very nice
What, the link is down?
Did it get xda'd? lol
Been using it for a few weeks.. Skinable and very easy to type with. In fact you can just slide your finger around and let go when you see the key you are looking for highlited..
Another thing you should look into is PocketCM...
http://www.pocketcm.com/
CONTACTS replacement!!! I like this even more then their keyboard solution.. Imagine the iPhone contacts slide you see everywhere, and you have pocketCM. One of the best features is the A-Z on the left side to quick jump.
Draven
How do you install this on hermes w/WM6? When I go into settings / input and change to PCM keyboard it says " Pocket CM keyboard has to be the current sip in order to configure it? what do I do?
Just click the little triangle beside your keyboard icon (bottom middle of bar) and select PCM Keyboard. That should do it...
i have been using the pocket CM k/b since yesterday and ts a quantum leap forward from any other k/b that is available. Its a must have for any Windows mobile user. It works on all PPC phones!
There is also a contact manager from the same author. You can use your fingers to scroll through and select contacts. I use that as well. It works great! It is called pocketCM. URL: http://www.pocketcm.com/index.php
I've installed it and it shows up in the list of available input devices but selecting it does nothing at all. The keyboard doesn't change visually onscreen and if I check the current input device it still shows the standard keyboard.
I can go into it's options and play around with things but if I change the Input Method to PCM Keyboard and click OK, it still doesn't switch over.
Running Schap's WM6 Pro 3.60a ROM.
Tried soft resets, tried installing to main memory and to storage.
Running 0.6 version.
Douginoz.
same problem here
What a bummer.
Too bad the Hermes doesn't have either a slide out keyboard, Block Recognizer, Letter Recognizer or Transcriber.
MHC48 said:
What a bummer.
Too bad the Hermes doesn't have either a slide out keyboard, Block Recognizer, Letter Recognizer or Transcriber.
Click to expand...
Click to collapse
I don't think sarcasm is called for; this looks like a neat keyboard that works better than the stock one for those times that you dont want to slide out or use the stylus.
douginoz said:
I've installed it and it shows up in the list of available input devices but selecting it does nothing at all. The keyboard doesn't change visually onscreen and if I check the current input device it still shows the standard keyboard.
I can go into it's options and play around with things but if I change the Input Method to PCM Keyboard and click OK, it still doesn't switch over.
Running Schap's WM6 Pro 3.60a ROM.
Tried soft resets, tried installing to main memory and to storage.
Running 0.6 version.
Douginoz.
Click to expand...
Click to collapse
Strange, I installed it on my 8525 (see sig for ROM info), and it worked fine. Of course my fat fingers don't let me use it all too well... But then again, I have the same problems with an iPhone and even the slide-out keyboard on the Hermes. I actually find the Letter Recognizer to work quite well for me, but it's a matter of personal preference (I was a big fan of Graffiti on the Palm, but Graffiti 2 was abysmal.)
-- Joe
keyboard on startup
Is there anyway to make this the default keyboard? When i reset my phone, it goes back to the standard keyboard
I'm in love with this keyboard! I had downloaded and installed the first version a couple weeks ago and liked it enough to use occaisonally. I felt like it had great potential and just needed a little polishing. But this new version, .6, is awesome! Perfect. I'm gonna use it all the time except when typing sms with the palm threaded app. I'll slide out the hardware keyboard on my hermes for that.
As soon as someone fixes the palm threaded app so that the SIP keyboard doesn't cover up the text you're inputting, I'll use this new PCMkeyboard there, too. And I'll send a hefty donation to that person that fixes the palm app.
donation on the way to this PCM guy, too.
Does anyone know if this keyboard supports other languages' input methods?
Under the options, there's a select box for "Keyboard layout" which includes:
Czech
English
Francais
German
Polish
Russian
Spanish
I'm no pro when it comes to these things but I have read a fair amount on here when it comes to these things, but I'm confused so hopefully someone can clarify..
I've got my new Compact 3 from T-mobile and I really can't stand the qwerty keyboard. It works fine with the stylus but it's just not any good for finger typing. I quite like the Touch version where the keys are quite a bit larger, so here's the question..
is it possible to get another input keyboard working on this device without the need for a replacement rom? I'm happy with the officla T-mobile WM6 version I upgraded to at the weekend.
http://www.cootek.com/
This one is good and free at the moment.
what will happen with the standard keyboard? will I still have choice to use the small keys one?
is there a way to add the touch keyboard but with Russian layout/letters without changing the rom?
I use resco keyboard, it's commercial but I haven't found any other keyboard for that price/features. It supports Russian and about 20 other languages. It seems to be working a little slower than other keyboards but not that much.
Try this one:
http://teksoftco.com/index.php?section=fingertouch
It's a very good keyboard, with tons of features, for me the big keys are a must-have.
macguffin said:
http://www.cootek.com/
This one is good and free at the moment.
Click to expand...
Click to collapse
I second this one, once you practice and get used to it, works very well.
Me, I am a bit slow, my XDA is zippin along tho, thanks to Tom latest oops black!
Two things, and I have searched but I cannot find an answer that was not too geeky for me to understand.
1. I loved my blackberry style keybord - qwerty but with half the buttons - I had an old flashed ROM from mechel (spelling) before and that let me pick from about three keyboards... how can I get something like this back... explin to me as is I was you granny and imagine your granny is slow...
2. what the heck is going on with the biotouch.exe? is there a workaround?
thank in a van ;o)
gc
www.sleepywhisper.com/guy
well sorry i don't understand you well :-S
but if you looking for a keyboard and spelling
there is the keyboard i'm using (i like )
HTC Opal EzInput QVGA KeyBoards Suite
and what the problem with the biotouch?
do I install the keyboard just like a regular cab application
you see I have already done that and the new kb hasn't shown up!
---
biotouch - when I run my finger down the screen after installing oops black - i get an error from biotouch.exe...
well
yes just install it as regular cab..
after soft reset your device.. and see the keyboards
anf for the bio touch see this post in that thread
http://forum.xda-developers.com/showpost.php?p=2315221&postcount=43
Hi there,
I'm usually in the Blackstone or Rhodium forums and have a mate who has the Xperia X1 and asked me about the on screen keyboards.
Looking at this phone, he only has the normal on screen keyboard which needs the stylus to be used, is there anyone out there that has the "Full QWERTY" and "Phone Keypad" Keyboards as a cab to install?
Thanks
search for FINGER KEYBOARD 2.1 or something like that. it's much better than the se kb.
nicelad_uk said:
Hi there,
I'm usually in the Blackstone or Rhodium forums and have a mate who has the Xperia X1 and asked me about the on screen keyboards.
Looking at this phone, he only has the normal on screen keyboard which needs the stylus to be used, is there anyone out there that has the "Full QWERTY" and "Phone Keypad" Keyboards as a cab to install?
Thanks
Click to expand...
Click to collapse
Are u serious?
what's the point of a software keyboard when u have a hardware one?
imho, the best solution even is to install nullkeyboard to stop the annoying software keyboard from popping up.
Try SPB Keyboard. Its great
Hi, Although u have the slider keyboard already, but for obvious reasons one may need a software keyboard too. Try SPB Keyboard (just google it and u get the links). It also gives u lot many plugins to shoose from various layouts/options of keyboard.
I have been using it for long and its works great on X1.
fingerkeyboard is by far the best!
hm.. this might help u
http://forum.xda-developers.com/showthread.php?t=487677
i am using this. its quite finger friendly for me.
hope this will help you.
amazin said:
Are u serious?
what's the point of a software keyboard when u have a hardware one?
imho, the best solution even is to install nullkeyboard to stop the annoying software keyboard from popping up.
Click to expand...
Click to collapse
Although hardware keyboards are great, you need two hands to use them. When you want to send a quick message or send something quick on Twitter etc, one hand is prefered, hence the Software Keyboard is needed.
Ravindra9 said:
Hi, Although u have the slider keyboard already, but for obvious reasons one may need a software keyboard too. Try SPB Keyboard (just google it and u get the links). It also gives u lot many plugins to shoose from various layouts/options of keyboard.
I have been using it for long and its works great on X1.
Click to expand...
Click to collapse
Never tried SPB keyboard, will have a look thanks
Jabe said:
fingerkeyboard is by far the best!
Click to expand...
Click to collapse
Yup, have used it on my Blackstone and Rhodium, very good indeed. Only problem is my friend wants the stock HTC one.
-Banana- said:
hm.. this might help u
http://forum.xda-developers.com/showthread.php?t=487677
i am using this. its quite finger friendly for me.
hope this will help you.
Click to expand...
Click to collapse
Cheers for the link
I used the Touch IT Blackstone keyboard set which includes a handy keypad, simulating a normal phone pad. I mostly use it for one-handed sms.
The filename is Touch-IT Blackstone Keyboard.cab or something, so a search would probably yield results.
nicelad_uk said:
Hi there,
I'm usually in the Blackstone or Rhodium forums and have a mate who has the Xperia X1 and asked me about the on screen keyboards.
Looking at this phone, he only has the normal on screen keyboard which needs the stylus to be used, is there anyone out there that has the "Full QWERTY" and "Phone Keypad" Keyboards as a cab to install?
Thanks
Click to expand...
Click to collapse
Tried fingerkeyboard, Blackstone and SPB one. Actually I'm with the xT9 keyboard, that id the official finger-friendly keyboard that SE ships with the R3A ROM release. It is by far the best one I've ever tried.
Try it, it's here: http://forum.xda-developers.com/showthread.php?t=494026
The xT9 is the best keyboard. The only one you can use with one hand!
hmm i'm keen too... does anyone have a working QWERTY HTC ezinput 2.x for the X1???
ones i've installed stuff around with the hardware keyboard fn keys...
ryousuke said:
hmm i'm keen too... does anyone have a working QWERTY HTC ezinput 2.x for the X1???
ones i've installed stuff around with the hardware keyboard fn keys...
Click to expand...
Click to collapse
ok....here is the cab for EzInput 2.1.19163529. its cool!! i like it.
this came with LEO rom.
http://www.mediafire.com/?3txkxhjzdom
chinee_iz said:
ok....here is the cab for EzInput 2.1.19163529. its cool!! i like it.
this came with LEO rom.
http://www.mediafire.com/?3txkxhjzdom
Click to expand...
Click to collapse
COOL does it work with the X1??? (any conflict issues with the hardware kb)?
ryousuke said:
COOL does it work with the X1??? (any conflict issues with the hardware kb)?
Click to expand...
Click to collapse
It is working fine except hardware keymapping - QWERTY FN key is not working well. need to surf to find answer..
csdhhong said:
It is working fine except hardware keymapping - QWERTY FN key is not working well. need to surf to find answer..
Click to expand...
Click to collapse
that was my issue... there's other ezinput 2.0 that i've got/tried...
and the fn keys are outputting different things...
ezinput 1.5 works BUT has smaller keys and the font is messed up (courier?)
oh well
still eager for someone to fix this issue...
what about the issue that older EzInput keyboards had with the predictive text on the X1i?
I remember when i installed 1.5 it would no longer pre-populate names as i was typing in the To: section for a text message
dont really care about t9 or predictive text...
i just want to type and use the fn key to properly output numbers rather than using sym all the time >.<
I was not to happy with the pocketCM and it was the most recent version too. I've heard good things about the TouchPal and the SPB keyboard but before I buy the I'd like to know the thoughts of others. Do you use one of these keyboards? what do you think? Do you use something different?
ezinput QVGA. There's no xt9 for the vogue, but the full QWERTY is brilliant
Get Touchpal. It's one of the best out there and I'm thoroughly satisfied. It's less than $10 now and worth every penny.
I've been playing with Finger Keyboard for a bit now and seem to like it. I'm not even a full qwerty type of person.
http://forum.xda-developers.com/showthread.php?t=550587
I am a pretty big fan of touchpal version 2.0. I tried version 3 and it was really clunky and laggy for me. I see no reason to even try V4(aside from maybe spell correction), version 2 has always worked perfectly for me and performed exactly as i would hope a keyboard would (word suggestion, saving) and best of all it is from a better time when 300 kb of program was free.
mine works on qvga for sure not sure if it will work on any other resolution
my vote
Finger keyboard w/o arrows:
http://forum.xda-developers.com/showthread.php?t=501122