Hi,
I need the procedure to update the ROM from WM6.1 to Ultimate7. I have carried out Hard SPL and tried to unsert ultimate7 but the UpgradeROM Utility fails updating saying that file is currupted.
Please help me to resolve the problem !!
Regards
Related
please help me!!!
i have a v1640 vodafone machine.
i have downloaded the 1.09 radio version of universal sited at xda-developers ftp.
i have tried to install. at the process, a error (the country id is not correct) was showed.
next, the pda not works. i have tried to make a hardreset, but the terminal don't start's...
please, help me!!!
the main problem is :
the startup not work's and the activesync soft not detect's the pda.
help me , please !!
Just check the Wikipedia and follow exactly the instructions.
Then it should work
Cheers
hrb
Link:
http://wiki.xda-developers.com/index.php?pagename=Radio only upgrade instructions
hi,
affortunatly i have readed other post.
i have started in bootloader mode and i have updated the rom to a qtek rom (1.13.74 esn).
later, i have updated the radio without problems.
now, i have the 1.13.74 esn rom , the 1.13.175 esn extrom and 1.09.00 radio software.
regards and thank's
hi,
in my opinion, the problem was the next: the first attempt i have installed the new radio version with the pda in normal mode...
the next attempt i don't have problems and the pda was started in bootloader mode.
regards
Inside:
-WWE-hx2000_PPC03_downgrade for return to WM2003se
-Wm5.0 for hx2000_1.00.00.L_ENG
-Wm5.0 for hx2750_1.00.00.L_ENG
-SP32205_1.00.03.H_RUS
-SP32205_1.00.03.H_RUS
-SP32408_1.00.00.H_ENG
-SP33003_1.02.00.H_ENG
-WM6.0_5.20.00.H_ENG
-Terminal_RDP
-Quarta
-hx2x90b_Mui_Quarta7
http://depositfiles.com/en/files/1799963
Thanks to Niko512 from 4pda!
I've an hx2415... would it works?
and when I've finished to DL... what must I do?
I've to Use Pre-BL mode?
'coz doesn't works for mine
I'm on WM5 but it's going really slowly ...
...I'm not able to upgrade to WM6 (SKU problem...?) and I need help about it...
Question: it's normal that PDA going so slow with WM5 ? when I clic on "settings" 2 (or 3) seconds needed
Please give another link to Advanced_pack_for_hx2xxx_to_WM6.exe , cause the original one is too slow for download and had a CRC.
please help me.
thx
Did you succed download ?
zeRobee said:
Please give another link to Advanced_pack_for_hx2xxx_to_WM6.exe , cause the original one is too slow for download and had a CRC.
please help me.
thx
Click to expand...
Click to collapse
============
DEAR
Is all OK ? You succed to download and to INSTALL wm6 ?
Please give me directions :
i have Hx2110 .
thanks
Please directions //....STEP BY STEP!
dancer_69 said:
Inside:
-WWE-hx2000_PPC03_downgrade for return to WM2003se
-Wm5.0 for hx2000_1.00.00.L_ENG
-Wm5.0 for hx2750_1.00.00.L_ENG
-SP32205_1.00.03.H_RUS
-SP32205_1.00.03.H_RUS
-SP32408_1.00.00.H_ENG
-SP33003_1.02.00.H_ENG
-WM6.0_5.20.00.H_ENG
-Terminal_RDP
-Quarta
-hx2x90b_Mui_Quarta7
http://depositfiles.com/en/files/1799963
Thanks to Niko512 from 4pda!
Click to expand...
Click to collapse
------------------------------------
Please directions //....STEP BY STEP!
Who is Niko512 ?
It is a Greek ?
gia sou Niko ....
Anyone had any success with an ipaq 2410 as every attempt at it has resulting in hanging at formatting PS right at the end.
If anyone could provide a guide that would enable me to use WM6 on the 2410 Id be grateful.
Even followed this with no success
http://forum.xda-developers.com/showthread.php?t=372799
EDIT: Finally got WM6 on my mobile thank **** for that.
Having trouble to upgrade my hx2410 WinCE4.21 to WM5
Hi,
I'm having trouble to upgrade my hx2410 to WM5. I successfully connect/sync my hx2410 with my pc thru bluetooth. But the upgrade process always stops at 0% and says to reset the hx2410. I tried many time and it is still the same problem . Anybody knows what might be the problem i'm facing? I wanted to install iGuidance for PPC on it and I need WM5. Help please.
Thanks
benkud said:
Hi,
I'm having trouble to upgrade my hx2410 to WM5. I successfully connect/sync my hx2410 with my pc thru bluetooth. But the upgrade process always stops at 0% and says to reset the hx2410. I tried many time and it is still the same problem . Anybody knows what might be the problem i'm facing? I wanted to install iGuidance for PPC on it and I need WM5. Help please.
Thanks
Click to expand...
Click to collapse
You can't update device through Bluetooth - it's impossible
You will need a USB cable or Cradle.
Go to my thread LINK and read first 3 posts
Ok please be gentle before you read.
I'm trying to change the offical T-Mobile ROM to the newer offical 1.93 from HTC.
I have download the ROM exe from this site but when it trys to install ROm an error comes saying "Error 244 invalid model ID".
I have tried searching & looking through loads of threads but all seems very complicated to a numpty like me!
Can some body please talk me through in easy steps to help me?
Thanks in advance.
You have to install hardSPL first. I prefer 1.40 from olinex.
http://forum.xda-developers.com/showthread.php?t=415191
http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705
hey guys and girls,
ive upgraded to wm6.1 and i would like to go back to wm5 as i have no activesync. ive tried all the different ways to get it working including the fix from yuc's thread with no luck.
where can i find the rom to put on my SD card and downgrade from there? also if someone can give me the step by step way to do it aswell.
thanks in advance
rick
is there another way to update a rom other than via activesync?! the official rom from o2 is run from the computer. HELP please!
downgrade xda stealth to wm5
i've same problem with you before, and i try to fix activesync with yuc file and i lucky, my stealth stay connect to pc until downgrading finish....and now i still use wm5 official from o2...keep trying bro....
please help me!
hello, where find it official room wm5 for my stealth? thanks a lot (sorry for mi bad inglish)
Downgrading Stealth to WM5 (SDcard Method)
Read My Thread
http://forum.xda-developers.com/showthread.php?t=556192
Hello,
I have a hp IPAQ hx2750 and I am trying to upgrade to WM5 on it, all of the roms that I have found do not work.
after re-flashing the boot loader sicks with the progress bar to full.
other info I tried wm6.5 first did that screw it up?
Thanks
I have tried
I have tried
HP iPaq HX2000 Series - Windows Mobile 5.0 Upgrade AND Downgrade - includes ActiveSync 4.0
advanced pack -> Wm5.0 for hx2750_1.00.00.L_ENG
the rom in the folder is E1_Magneto_ROM_v1_00_00_H_SIGNED
the 2790 wm5.0 rom from HP SP33752
rs330.rapidshare.com/files/95298896/WWE-hx2000L_WM5_Upgrade.rar
does anyone have the hx27xx upgrade cd around?
WM6.0 is not working.......
WM6 roms I have tried
WM6_WWE.nbf 5,20.00.H
spiaatie_WM_6_5.nbf
rapidshare.com/files/53282580/WM06.rar
this is really annoying.......
please help
please help me upgrade this device
Thanks
You need to read the first three posts in this thread
http://forum.xda-developers.com/showthread.php?t=519296
If you follow the instructions carefully, you should be able to ugrade your device. Post any other questions you have in that thread. The people on that thread can help you with any problems you might have.
Rowley.
Ok I will
Thanks