Before I upgraded to the HTC WM6, I was on t-mobile rom and I held A/# key to silence the phone. Now that i've upgraded to the HTC WM6, it won't let me do that anymore. It just goes to the dialer with a # key showing. Anyway to reactive the one-key silencer?
Can't you just hit the right soft key? That sends it to voicemail, no?
My right soft key is contacts...
Not when its ringing..lol
I believe he is referring to toggling between profiles and not silencing an incoming call. You can always do a quick press of the power button to bring up a quick access to your profile choices.
So there's no way to hold one button and silence it like that? -_-
there is a new version of AE Button! The Button map application! Any experiences? Is there an improvement for the HD? Let´s test
Anyone tried?
I wish to know too =)
Is it free?
I have this registered.
The unregistered version is actually almost fully functioning and well worth trying.
I choose to register since I found the application useful and it seemed fair to pay the developer.
THANKS, for the new version alert. But, I suspect there is little new as the history details for this version are:
02.02.2009(v2.6.6):
Fixes:
Backlight works on HP 612c now
Languages:
Updated Traditional Chinese resources (thanks to Chow Yuh)
AE Button
I find this software very useful. It completely eliminates the need of locking/unlocking software for me.
I just set double or triple tap to answer and hang up keys. This will prevent accidental key press when taking HD out of pocket. To answer call, simple double/triple tap on answer key or simply slide on screen to answer (built-in screen lock will be unlocked during incoming call).
Set press and hold volume up to toggle wireless and down to toggle bluetooth.
This one single software solved all my screen locking + lack of buttons issues!! Believe me i tried touch lock pro, sensor lock, slide to unlock and what ever you can think of (I didnt like because I think its not really practical for me to be rolling phone 180 degrees or shaking back n fourth in meetings to answer a call.)...I know you guys may argue it has light sensors to unlock, but I'll be in meetings and presentations which might be low light conditions. I do not want to set very small for polling interval either. If you have tried all else, no harm in trying this.
if you guys face the same problem like me, this tiny software might be the right solution for you.
The best combination for me:
Gyrator2 (fine tuned based on my apps) + Lumos + AE Button Plus + Touch Response (for onscreen keypress only).
The only flaw that i could find to complain is that they should really change the icon...it looks like bread/potato/or whatever...
Headset Buttons
Hi there,
is this program able to capture the button press events from a headset wired/wireless?
What I'd like to achieve is, to switch to the next song in Mediaplayer as long there is no incoming or active call.
Is that possible?
Thx in Advance
Steve
noctifer said:
Hi there,
is this program able to capture the button press events from a headset wired/wireless?
What I'd like to achieve is, to switch to the next song in Mediaplayer as long there is no incoming or active call.
Is that possible?
Thx in Advance
Steve
Click to expand...
Click to collapse
Hi, I believe not. I understand the press events from headsets and bluetooth AVRCP are actually trapped in the hardware by HTC and by-pass the operating system and are sent directly to TF3D music or WMP.
If you check on the AEB plus site: http://ae.inc.ru/ it says the app is not for specific applications.
(Also: the AEB+ icon does look like a loaf of bread !!)
Will it allow me to remap the Home button on the Touch HD?
CorruptedSanity said:
Will it allow me to remap the Home button on the Touch HD?
Click to expand...
Click to collapse
Nope. All the others but not the home button.
I have:
1. volume up. 1 press = arrow up, 2 press = volume up, long press = plamp (flash light)
2. volume down. 1 press = arrow down, 2 press = volume down, long press = resco notes recorder (auto)
3. OK / back. 2 press = rotate screen 90 deg
I keep the long press on phone end and long press on phone start handled by the system.
Dave, thanks a lot and you have some very smart short cuts
I may very well adopt them too.
CorruptedSanity said:
Dave, thanks a lot and you have some very smart short cuts
I may very well adopt them too.
Click to expand...
Click to collapse
Thanks, but I'm needing a suggestion for replacing the flash light. Never used this now "for real" so I shall find something else for the long volume up press ...
I have almost identical settings but use the long up as a bluetooth toggle. This is a fantastic program and really eliminates one of the few shortcomings of this phone.
Cheesy Dave said:
long press = plamp (flash light)
Click to expand...
Click to collapse
do you know where i can get this plamp please?
P Lamp v1.5 http://pda.jasnapaka.com/plamp/
Question guys,
How do I map the call button to long press (like the smallest long press ever) to get the Start menu?
Thanks
Sorry, I don't understand what you want. Is "call button" the "end call" or "start call" ?
Dave, call button is the left-most button that answers/makes a call. If it were colored, it would have been green.
I want to short press it to start menu (heres the tricky part, I have Quick Menu as my start menu).
Basically I miss the Start button from my TyTn II (Kaiser) and the scroll on the top. I have managed to set the volume buttons as scroll up/down and want the start call button to imitate the start menu button when I long press it. But I want to long press it for as little time as possible. So say 1 second as opposed to 3 seconds.
I see. So, two points:
1. Get quick menu
2. Use a "short" long press
I asked because the green/start left button is assignable in the standard settings - button to the <start menu> but I don't know how to do this to quick menu. I guess if you make a short cut to quick menu and drop this somewhere in the Programs folder in windows (or a sub-folder) then the standard settings - button should find it OK.
But, for option 2 I have no idea. Instead of the "short" long press how about using AEB+ with a double press ?
Dave, I see from the options that you can set the delay. I guess this from the "Key Press timeout" menu where you can select units of time starting with 200ms to 900ms. I am guessing that 200ms of time needed for a long press would be the shortest longpress possible.
Any how, how to assign the green button to start menu? It doesnt work for me. I have it as 2 presses or 3 presses or long press for start menu but nothing happens.
one problem it works to rotate(volume up which i assigned) but as soon as i make a call or recieve a call it no longer works untill i soft reset???? im i missing a setting or something? i have duttys rom, please help! : ) thanks!
Hi,
I have the following problem with AE Button plus with my Touch HD.
I had the problem with closing the phone during i was taking it out of my pocket.
I installed AE Button plus and assigned only to the Red button a function. All is OK, when the phone is ringing the Red button is not working, but the problem is, that when i pick up, it is not working again and i have to end the call with the touch screen button and it is very annoying.Is it possible this Red button function to work only up to the moment i have answered and after that to have normal button functionallity?
PS. Sorry for my bad English!
AE Button Plus - please help
Please, help me with the above issue!
Thanks in advance!
why is it annoying to use the touch screen to end the call?
I would suggest to leave alone the single click of red button but instead map a double click function you want to the red button.
I've had this problem previously. I love AEBPlus and think it is probably the best app on the phone. You need to uncheck the option under 'other options' for 'drop on red key'. Paradoxically this should not be checked. When checked I cannot drop on red key but when unchecked I can end call using this hardway end key. Let me know how you get on!
The AE Button Plus didn't seem to work on my Blackstone (HD). It would work after being reset but after a while, the mapping has no effect anymore. I want to map the volume up/down button to "Up/Down Arrow" and the Long Press of the Volume Up button to run the S2U2 application. Anyone has similar issues?
I have problems with AEButton too. I assign "volume up" to turn display on/off at one click. Sometimes, it works. Sometimes, it brings up the voume control. Annoying.
tatou said:
I have problems with AEButton too. I assign "volume up" to turn display on/off at one click. Sometimes, it works. Sometimes, it brings up the voume control. Annoying.
Click to expand...
Click to collapse
That is exactly my problem. I should not have paid for the software if I knew that it works intermittently.
Do you have some taskbar installed? Try to remove.
Hey guys,
Anyone know how I can remap the leftmost hardware button to call history (or make the soft keyboard from popping up everytime?) I never need the soft keyboard so i just want it to go to a fullscreen call history page when I press it.
Thanks
Just wondering if there is a way (or an app) that enables the screen to remain off until the power button is pressed when there is an incoming call? At present I'm using Dialer1 and I often find I've missed a call and the screen has remained on since the time of the call. Obviously this chews through the battery so I'm keen to find some way of either making the screen switch off post-missed call, or require that the power button be pressed to switch the screen on when a call comes in...any help most apreciated!!