Hi everybody, i'm italian and i have just bought the htc p3300 with windows mobile 5. I wish to upgrade the htc in windows mobile 6 but i don't know how to install and where i can find the software.
So, can someone to help me?? please.
Sorry for the language
kyey said:
Hi everybody, i'm italian and i have just bought the htc p3300 with windows mobile 5. I wish to upgrade the htc in windows mobile 6 but i don't know how to install and where i can find the software.
So, can someone to help me?? please.
Sorry for the language
Click to expand...
Click to collapse
hi with a quick search I found the original wm6 rom the P3300. --> link
you just run the .exe and follow the steps after connecting the device through active sync.
the device will automatically restart and will end the installation alone.
But remember,yuo must remove the microSD and SIM.
after you reboot automatically and ask you to hit the screen and other details and you're done.
Bye,
Silvio
I send you a private message...please read...and i wait an answer
kyey said:
I send you a private message...please read...and i wait an answer
Click to expand...
Click to collapse
Hi,
within few minutes you will receive an PM
By,
Silvio
EDIT:
Check your private messages...
Related
HTC e-club (download from 5 okt 2007)
"There have been reported cases wherein the virtual Phone Pad became unavailable after the device has been upgraded from Windows Mobile 5 to Windows Mobile 6. If you encountered the same problem, please download this installer (.cab file) and run it on your device to install the Phone Pad."
Anybody seen this? I don't think so, because there is no WM6 from HTC yet for the P3600.
Windows Mobile 6 upgrade for HTC 3600?
http://member.htc.com/downloadfiles/Driver/HTC P3600/PhonePad_1.0.28597.0_20070907.CAB
Page not found ...
the file you are looking
http://rapidshare.com/files/61074815/PhonePad_1.0.28597.0_20070907.CAB
Stingray66 said:
HTC e-club (download from 5 okt 2007)
"There have been reported cases wherein the virtual Phone Pad became unavailable after the device has been upgraded from Windows Mobile 5 to Windows Mobile 6. If you encountered the same problem, please download this installer (.cab file) and run it on your device to install the Phone Pad."
Anybody seen this? I don't think so, because there is no WM6 from HTC yet for the P3600.
Windows Mobile 6 upgrade for HTC 3600?
Click to expand...
Click to collapse
Has anyone installed this yet? It would be nice to see a screen shot!
Hi,doesn't work for me.
PGMMA said:
Has anyone installed this yet? It would be nice to see a screen shot!
Click to expand...
Click to collapse
It would be nice...
Guybrush said:
the file you are looking
http://rapidshare.com/files/61074815/PhonePad_1.0.28597.0_20070907.CAB
Click to expand...
Click to collapse
Hi
Is this the original (default) Phonepad application from HTC?
Sian said:
Hi
Is this the original (default) Phonepad application from HTC?
Click to expand...
Click to collapse
yes it is.
It works with WM5 FRA from HTC. Not tested with WM6.
Thanks.
Anyone has the XT9 phone pad cab file?
Its been removed from the Other Downloads section again.... For a device that HTC has stated won't get an official upgrade to WM6, there seems to be an awful amount of activity on the member site.
Hehe the rumours are entertaining though.
WM6 Pad but no WM6
Stingray66 said:
HTC e-club (download from 5 okt 2007)
"There have been reported cases wherein the virtual Phone Pad became unavailable after the device has been upgraded from Windows Mobile 5 to Windows Mobile 6. If you encountered the same problem, please download this installer (.cab file) and run it on your device to install the Phone Pad."
Anybody seen this? I don't think so, because there is no WM6 from HTC yet for the P3600.
Windows Mobile 6 upgrade for HTC 3600?
Click to expand...
Click to collapse
Hey there!
I have also seen this update for resolving issues after upgrading to WM6.
But how could a company which is NOT releasing WM6 upgrade post an update which would fix an upgrade to WM6?
Are they supporting cooked ROMs?
Or are they planning on an official update?
Sian said:
Thanks.
Anyone has the XT9 phone pad cab file?
Click to expand...
Click to collapse
did u search this forum? I have asked about this and the XT9 is posted there. Also I have installed XT9 with udK 6 rom and it works just keep in mind that if you try to change lang during your usage of the XT9 it will get crazy and you have to do a soft reset, other than that it works great.
Just my 2 cents.
itlinux said:
did u search this forum? I have asked about this and the XT9 is posted there. Also I have installed XT9 with udK 6 rom and it works just keep in mind that if you try to change lang during your usage of the XT9 it will get crazy and you have to do a soft reset, other than that it works great.
Just my 2 cents.
Click to expand...
Click to collapse
I've done a lot of search, unless I didn't do it correctly. So far, didn't find what I want. Although there's a HTC XT9 cab file, it's not the one I want.
Can you PM me the file or just post it here?
i want to upgrade to windows mobile 6 my htc p4350, and can not find any link , i finish my register in htc home page and dont give me the update option, please help me
thanks in advance
Hey I've just install WM6 on my HTC P3300 and the GPS stopped working at all and navigation software doesn't even know that there is internal GPS what can I do ? (I dont reall care if I have to downgrade to WM5 just tell me HOW) Thank You guys !!!
dor515 said:
Hey I've just install WM6 on my HTC P3300 and the GPS stopped working at all and navigation software doesn't even know that there is internal GPS what can I do ? (I dont reall care if I have to downgrade to WM5 just tell me HOW) Thank You guys !!!
Click to expand...
Click to collapse
Hi! tell us more about: - which country did you buy your P3300
- which ROM did you install
I have WM6 and Ibought it on the US
dor515 said:
I have WM6 and Ibought it on the US
Click to expand...
Click to collapse
Ok did you read the howto flash a ROM on ARTEMIS?
If yes you probably saw a line that told you to flash twice your P3300.
It often resolve flashing problems. GPS usually use COM4
You can test with free GPS software or with Navio software.
COM Ports
I may be wrong but I seem to have a vague recollection that in the US, the original ROMs use COM9 for GPS (can anyone confirm?). Flashing to a new rom will have changed this to COM4 so you may just need to reconfigure your GPS settings in the individual applications.
Hey thank you for a quick response but i followed the rulles how to install and its still not working after many times please i you can send me a link with the Windows mobile 5 so i will try to reinstall the original WM that came with the phone thanks anyway
dor515 said:
Hey thank you for a quick response but i followed the rulles how to install and its still not working after many times please i you can send me a link with the Windows mobile 5 so i will try to reinstall the original WM that came with the phone thanks anyway
Click to expand...
Click to collapse
Official HTC WWE WM6 SHOULD work with any P3300, that couln't be yours that is not possible to run GPS part.
There is an ARTEMIS or HTC P3300 model that have no GPS inside ? or I've just misinterpret what you said maybe you can give me a link with a refresh WM5 software the will surely work with mine ?
dor515 said:
There is an ARTEMIS or HTC P3300 model that have no GPS inside ? or I've just misinterpret what you said maybe you can give me a link with a refresh WM5 software the will surely work with mine ?
Click to expand...
Click to collapse
No, All HTC P3300 have got a GPS inside (it remember M$ pub ) only some P3300 haven't got Wifi inside.
You should forget about WM5. I said that I am pretty sure WM6 should work with your GPS.
I can give you a WM5 but it is French orange switzerland version
Was your Wm6 an original HTC WWE version?
NO its a custom something (I dont know) but for sure not an original one please if you can send me link off and World wide English official HTC manufacturing version and i would install it ASAP
Try this...
Start -> Settings -> System Tab -> Clock & Alarms
On Time tab, make sure your time AND time zone is set correctly
Start -> Settings -> System Tab -> Regional Settings
On Region tab, make sure your region is set correctly
Start -> Settings -> System Tab -> External GPS
On Program tab, make note of GPS Program Port
Download & Install VisualGPSce
http://www.visualgps.net/VisualGPSce/VisualGPSceInstall.CAB
Run Visual GPSce
Go to Connect -> Serial port
Set Port to that in "External GPS" setting above and Click OK
If the red dot in the bottom right flashes then your GPS is ok! You may just have to wait for a lock (look for QuickGPS too).
dor515 said:
NO its a custom something (I dont know) but for sure not an original one please if you can send me link off and World wide English official HTC manufacturing version and i would install it ASAP
Click to expand...
Click to collapse
Hi! Download from this link I found on XDA ARTEMIS Wiki
http://rapidshare.com/files/60087606/HTC_P3300_WWE_3.13.405.1_4.1.13.44_02.94.90_Ship_R.exe
PS: Link of the XDA ARTEMIS Wiki : http://wiki.xda-developers.com/index.php?pagename=HTC_Artemis
Tell us if it is working after this HTC WWE release.
Hey about the GPS solution its not working it says "could not initialize communication buffer size" than when i press OK another windows pops up and says "Unable to open port please close the application accessing thecommuinication port" and i press OK and nofting change can you help me with that .... thanking you in advance!!!
dor515 said:
Hey about the GPS solution its not working it says "could not initialize communication buffer size" than when i press OK another windows pops up and says "Unable to open port please close the application accessing thecommuinication port" and i press OK and nofting change can you help me with that .... thanking you in advance!!!
Click to expand...
Click to collapse
Did you reinstall the official ROM version?
Hey when I try to install the ROM WWE after I press the update button it sends me in a white screen and than he gives me ERROR 260 means cant connect with the device what should I do
p.s. by the way my operation system is Vista so just let you know if there is any kind off significance to the subject
Darren.
When I try to install it without memory card he gives me new error after 2 percent says ''INVALID MODEL ID" this utility can't be use on your PDA ... bla bla bla ... !!! you have any king of advice hint or any kind off something helpful
Try hard reset
First you can try to hard reset your device (pressing the 2 soft key and reset at the same time) You will get a message, press the green phone button. If this does not resolve your problem... you can read first post in the forum, to learn how to flash a new ROM. Does your gps ever worked ?
dor515 said:
When I try to install it without memory card he gives me new error after 2 percent says ''INVALID MODEL ID" this utility can't be use on your PDA ... bla bla bla ... !!! you have any king of advice hint or any kind off something helpful
Click to expand...
Click to collapse
Ok, the best thing to do is to CID unlock your device (I thaught you already done that)
Read this Thread carefully it will explain why!http://forum.xda-developers.com/showthread.php?t=308242
Then use only this to CID unlock your device : http://rapidshare.com/files/119852558/Artemis_USPL.rar.html
After that reinstall the original HTC WWE ROM.
Your problems are from flashing from vista, there are a lot of threads about this, but basically you have to piss about untill you have found out how to install a bunch of old xp drivers and then no more 260 errors. When you have done that you can tell us all here just how you did it and post the drivers again because they are getting harder and harder to find.
uniqueboy said:
Your problems are from flashing from vista, there are a lot of threads about this, but basically you have to piss about untill you have found out how to install a bunch of old xp drivers and then no more 260 errors. When you have done that you can tell us all here just how you did it and post the drivers again because they are getting harder and harder to find.
Click to expand...
Click to collapse
Uniqueboy you are too funny...but the easiest way is SDCARD flashing...have a look at XDA-Artemis-Wiki http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hi guys,
i want to upgrade my samsung i750,
its windows mobile 2003SE ppc .which is the best rom for this device,one more thing can i upgrade it by cab file bcoz i m facing the problem when i connect my windows mobile2003SE to Pc via sync it shows error
''can not exute repllog.exe''
even i hard reset many times but i m still facing the same problem
plz help me.
thx.
Asthis is an HTC devices only you wont get too much atention, however in off topic there is a thread regarding samsung, perhaps there you´ll get more help.
Good luck,
thx for reply bro'
but can u give me the download link please.is this cab files i can direct install to device .
plz help....
Hello everybody!
I recently found this old Qtek 9090 with Windows Mobile 2003, and I'd like to upgrade the OS to Windows Mobile 6 (in Italian) and then use it as a navigator...
I've already searched in this forum, but most of the links and downloads don't run, I suppose because this is an old matter...
I need also information about how to upgrade the rom... and I've read that I need also a "preparation pack" for WM2003 to use before upgrading, but I can't find a working link to the download.
Until now I found and downloaded this... "RC5 23698 Multi-Rom" by d-two... it is a .nbf file... but I actually don't know what to do with this file.
I apologize of having posted a new thread, I've already read a lot of posts in this forum, but the more I read, the more I get confused :S
I hope someone can help me, thanks a lot!
lukarons said:
Hello everybody!
I recently found this old Qtek 9090 with Windows Mobile 2003, and I'd like to upgrade the OS to Windows Mobile 6 (in Italian) and then use it as a navigator...
I've already searched in this forum, but most of the links and downloads don't run, I suppose because this is an old matter...
I need also information about how to upgrade the rom... and I've read that I need also a "preparation pack" for WM2003 to use before upgrading, but I can't find a working link to the download.
Until now I found and downloaded this... "RC5 23698 Multi-Rom" by d-two... it is a .nbf file... but I actually don't know what to do with this file.
I apologize of having posted a new thread, I've already read a lot of posts in this forum, but the more I read, the more I get confused :S
I hope someone can help me, thanks a lot!
Click to expand...
Click to collapse
Look in the thread and download the updater...
Use you win 7 64bit?
d-two said:
Look in the thread and download the updater...
Use you win 7 64bit?
Click to expand...
Click to collapse
Thank you for the help...
Yes, I'm using win 7 64 bit on my notebook, but if this is a problem I can use my old desktop with win XP sp2 32 bit! I've already downloaded your rom and also the updater!
lukarons said:
Thank you for the help...
Yes, I'm using win 7 64 bit on my notebook, but if this is a problem I can use my old desktop with win XP sp2 32 bit! I've already downloaded your rom and also the updater!
Click to expand...
Click to collapse
Yes, better you use XP, if you have wm2003 on the blueangel you must only connect it on the PC, if you have WM5 or higher you mus put the blueangel into bootloader modus!
d-two said:
Yes, better you use XP, if you have wm2003 on the blueangel you must only connect it on the PC, if you have WM5 or higher you mus put the blueangel into bootloader modus!
Click to expand...
Click to collapse
So, I just have to connect the device and run the updater, right?
lukarons said:
So, I just have to connect the device and run the updater, right?
Click to expand...
Click to collapse
Yes, sounds easy, right
d-two said:
Yes, sounds easy, right
Click to expand...
Click to collapse
the updater crashes while "Checking the information on your device... Please wait..."
What's wrong?
ok, sorry, I just forgot to put the .nbf file into the updater folder...
ok, upgrade successful! But now my pc doesn't recognize the device when I connect it... and I need to enter the device memory! What can I do?
lukarons said:
the updater crashes while "Checking the information on your device... Please wait..."
What's wrong?
ok, sorry, I just forgot to put the .nbf file into the updater folder...
ok, upgrade successful! But now my pc doesn't recognize the device when I connect it... and I need to enter the device memory! What can I do?
Click to expand...
Click to collapse
Go to ->Settings->connection->USB and test different settings!
d-two said:
Go to ->Settings->connection->USB and test different settings!
Click to expand...
Click to collapse
It doesn't work... Windows recognizes a device called "Blue Angel" but can't find its drivers and the Windows Mobile utility of win7 doesn't recognize it...
The Update failed and now. the BlueAngel is in Bootloader mode.
Any ideas what I could do now?
great sreye
sabrinah said:
The Update failed and now. the BlueAngel is in Bootloader mode.
Any ideas what I could do now?
Click to expand...
Click to collapse
hi did you get it sorted
same here my device is stuck now as well on the m#bootloader .cant do any thing at all after that or cant even get it out of the bootloaader. third today searching the forum any one who can help me out on that
---------- Post added at 02:34 AM ---------- Previous post was at 02:13 AM ----------
d-two said:
Yes, better you use XP, if you have wm2003 on the blueangel you must only connect it on the PC, if you have WM5 or higher you mus put the blueangel into bootloader modus!
Click to expand...
Click to collapse
hi i got wm 2003 ba . i connected it straight and now m stuck in bootloader any help please .searching every where for it . and i got win 8 64 bit but this happened on win 7 32 bit .
read and try to understand D-Two's how to- it is all written there.
Common posting rule: first search, then read, then search again, read again, and if still nothing found: post
... and for sure you'll get helped.
thanks
?
What for?
btw: i forgot to write it's crucial to tell exactly what you've done before you ran into problems...
Few of us have second sight