make the "au" button to "ctrl" - XPERIA X1 Themes and Apps

is it possible? what software is needed? I don't use the "au" button so I wonder if I can make it like "ctrl" so it will be easy to copy/paste?
would this work? http://ae.inc.ru/aekmap.php
thanks

Gille1 said:
is it possible? what software is needed? I don't use the "au" button so I wonder if I can make it like "ctrl" so it will be easy to copy/paste?
would this work? http://ae.inc.ru/aekmap.php
thanks
Click to expand...
Click to collapse
maybe U can try PqzII for WM 6, googling it.

I was also looking for a way to get CTRL functionality, tried both aekmap and PqzII, none of them worked so good and were a bit hard to get up and running, anyway i found "Kwik-e-map" at this forum which could map the fn button (the fn button is in the most logical ctrl spot at the keyboard so that's perfect) to function as ctrl while at the same time hitting either z,x,c,v or a (undo, cut, copy, paste and mark all) it takes only ~ 300KB of RAM and barely 0.5% CPU while being used (which is when you execute the mappings).
That's all i would use CTRL for anyway and those buttons doesn't have any "fn"-functionality, which makes it a "perfect" ctrl button.
http://forum.xda-developers.com/showthread.php?t=490013
I've also attached my configuration file, so you can just copy it over into your KwikEmap folder and have it working at Xperia X1! =) (add a shortcut to the .exe in the autorun folder to have it boot up at reboot)
Note that the program is made for Raphael/Fuze, but it works flawlessly at Xperia. (I've removed all Raphael default mappings that's included in the .cfg file from the beginning)
Highly recommended mapping tool!

THANKS!

Thanks noONExda.
Here is a cab with your cfg.

Thanks radospol, can be handy having the .CAB premade for X1 =)
I've seen a lot of X1 users looking for CTRL mapping to get Copy/paste ability, so feel free to spread that CAB around to the X1 people =) the cab should be renamed though to make it clear it's preconfigured for X1 i think. (if it's alright with the developer that is..)

Ok. You ask the developer allowed to rename? Then you can create a topic.
It would be a useful topic.

Related

Remap 'home' button to 'start'

Along the bottom of the phone there's a home button and an endcall which, within programmes, seem to do the same thing - take you back to the today screen. Or, in my case the 6.5 CHome thingy. And the back button in most apps takes you to the home screen too - so that's three buttons largely doing the same thing most of the time.
The new phones with 6.5 preinstalled will have a windows-flag start menu button, I assume this will open up the new hexagony start menu.
Is there a way of remapping the home button so it launches the start menu instead?
That is EXACTLY what I have been thinking for the last days. Pressing Home-key should naturally bring up the start-menu.
Nice idea, even because reaching the top left corner with your right thumb(maybe for left handed it's easier ) while holding the HD with the right hand is a little bit tricky
I'd like something small to do this but I have a feeling most people will return with the suggestion "use aebplus to remap"
I have the same feeling wiggz, There must be a registry key or something that can be changed and put into cab format? Anyone got any ideas?
Me to
So, we are many!!
I too have been looking for a way to do this for ages.
I too will be watching this thread with interest and hope.
Nick
Wiggz said:
I'd like something small to do this but I have a feeling most people will return with the suggestion "use aebplus to remap"
Click to expand...
Click to collapse
No aeblus cannot map the home button as it's hard coded into manila!
bonesy said:
I have the same feeling wiggz, There must be a registry key or something that can be changed and put into cab format? Anyone got any ideas?
Click to expand...
Click to collapse
so as the home button is coded into manila it mean's one has to play with the manila files and remap to start menu all that would mean is to change some scripts!!
bottomline Home button in theory can be mapped to the start menu!! so it's plausible!!!
i'm going to watch this thread as well --- i've been looking for this since I got hold of my HD. I've already remapped the "back" button to S2U2 via AEB since you are correct, essentially the home, back, and end buttons all work very similarly.
Hoping that someone posts a solution to this!
i have the solution...install this program and you can change all the hard keys to do almost any function...i have mine set up to do the exact same thing that you want it to do!!
cheers!!
i have the solution...install this program and you can change all the hard keys to do almost any function...i have mine set up to do the exact same thing that you want it to do!!
cheers!!
Thanks,but could give more informations to remap keys,please ? The list is empty when i launch the application ...
Same here. I was so happy when I found this thread..
When I tried installing that, it did not work... Maybe it was my ROM.
There are REG keys that remap home in certain cituations, i.e. manilla but I have yet to find a way to get the reg key to do anything else.
The new keypad.dll maps it to a normal vk_lwin, so you can remap it as you like.
Unfortunately I have not yet seen it an any ROM.
gfreek said:
No aeblus cannot map the home button as it's hard coded into manila!
so as the home button is coded into manila it mean's one has to play with the manila files and remap to start menu all that would mean is to change some scripts!!
bottomline Home button in theory can be mapped to the start menu!! so it's plausible!!!
Click to expand...
Click to collapse
Ok I take this back if I can get the tool given by jdmsleepr to work!!
jdmsleepr said:
i have the solution...install this program and you can change all the hard keys to do almost any function...i have mine set up to do the exact same thing that you want it to do!!
cheers!!
Click to expand...
Click to collapse
Many thanks for this jdmsleepr you sure will make many hd owners very happy if this tool actually works!!
However I have installed this and configured the buttons to my liking but it's not working! upon start up I get error "SMartTouch service is not found" so have I missed something? can you please give us more details on how one configures this tool of yours?
gfreek said:
Ok I take this back if I can get the tool given by jdmsleepr to work!!
Many thanks for this jdmsleepr you sure will make many hd owners very happy if this tool actually works!!
However I have installed this and configured the buttons to my liking but it's not working! upon start up I get error "SMartTouch service is not found" so have I missed something? can you please give us more details on how one configures this tool of yours?
Click to expand...
Click to collapse
It is for Diamond and the author says here post 10 "For the touch HD, maybe you should download HTCAPI.DLL somewhere, put it in /Windows and try again". Haven't read the whole thread though so not sure if this is what the problem is.
i know its a little confusing to get it started...so heres what you do...install cab, go to program files\dredsensor and click on dredsensor.exe and a config.ini will appear...now close out whatever app you are using to view files...and open dredsensor...now you will see default under name...tap default and then click menu, then edit...change type to launcher...then go to click and tap the gray box next to the home key...go to events and chose Misc:Start, hit select, hit ok to comfirm, change whatever others you want to...then hit save, then hit ok to confirm...then hit exit...then you should be good to go...hope this helps!!
custardo01 said:
It is for Diamond and the author says here post 10 "For the touch HD, maybe you should download HTCAPI.DLL somewhere, put it in /Windows and try again". Haven't read the whole thread though so not sure if this is what the problem is.
Click to expand...
Click to collapse
Hello,my opinion : if you post something in blackstone thread it's normally compatible with this pda , no ?
Edit : i build this cab for our HD and now it works ! Don't forget to do a soft reset .
Marcdu81 said:
Hello,my opinion : if you post something in blackstone thread it's normally compatible with this pda , no ?
Edit : i build this cab for our HD and now it works ! Don't forget to do a soft reset .
Click to expand...
Click to collapse
can i know what r the dependencies .. i mean what files r needed for the four buttons to run as i use kitchen... i need to knw ...thanks
not working for me,installed app then fix,selected type:hardkeysimul,set the home to start,tried it and all I get is an error popup which stays onscreen all the time even after soft reset,had to do a hard reset. Any help from you who got this thing working?
Marcdu81 said:
Hello,my opinion : if you post something in blackstone thread it's normally compatible with this pda , no ?
Edit : i build this cab for our HD and now it works ! Don't forget to do a soft reset .
Click to expand...
Click to collapse
Thanks! just did this as per your instruction but still no joy!! still get the same error message on start up "SMartTouch service is not found"

What is the CTRL key on hw keyboard for???

I can't find a suitable use for that ctrl key... Whatever I use it for, it doesn't activate anything....
Has anybody found out how to use this ctrl key?
Does it work for Copying and pasting? Ctrl + C etc?
Not got mine infront of me so i cant check
Yes it does - now that I have tried....
Sorry for asking a dumb question....
... Now I wonder whether there are just CTRL+C / X / P or there are other commands available...?
ninja.rogue said:
Yes it does - now that I have tried....
Sorry for asking a dumb question....
... Now I wonder whether there are just CTRL+C / X / P or there are other commands available...?
Click to expand...
Click to collapse
Will no doubt depend somewhat on the application. Boy do I wish Sprint's version didn't take it away
nothing in the manual? (A)
I imagine there pretty similar to the commands on a keyboard?
I know Command A works to select all on the software keyboard on all PPCs so try that one?
To be honest, how many different commands are there for the Control button? I think in Total Commander you can use the control to select multiple files/folders.
will there be a function for switching programs or pages just like the PC e.g. CTRL TAB? It will cool if there is a function like that.
cocoaju said:
will there be a function for switching programs or pages just like the PC e.g. CTRL TAB? It will cool if there is a function like that.
Click to expand...
Click to collapse
There is no TAB. :-(
I thought I'd revisit this. This may be helpful for those of you who didn't read your device's user manual (which is where the attached came from)...
the Ctrl key is so useful in Remote Desktop

Key Remapping without AEBPlus

I had a fairly simple desire to map in a hotkey to enable and disable wifi with a single press-- I'm using the current 3VO 6.5 ROM. I'd located the Wireless Toggle utility, but now I need to attach it to a key. I didn't want to use the T-zones key by redirecting the Short_IE.lnk, because I find Celetask very useful there. I assume I could redirect the camera with Short_Camera, but I kind of like having this there too. The AEBPlus utility seems like overkill-- I only want to redirect one key, and I'm a little intimidated by the "oops I can't use my dash anymore" potential from mismapping some keys.
The solution I wanted to come up with is mapping an Alt value to the T-Zones or Mail key, or possibly redirecting the Mail key. However when I look at the et9 keyboard mapping file, I see that these keys aren't even in it from what I can see. I guess they are different from the other keys, and so I'm not sure I have the capacity to add an Alt value. So these are my questions:
- Is there some integrated way to assign Alt values to the Tzones and Mail keys without AEBPlus or another utility?
- Is tmail.lnk the shortcut that controls the Mail key? Are there other shortcuts that also are involved?
Sorry if this has been answered before. I tried to search on this, but maybe I just wasn't coming up with the right search string.
Thanks,
Gnat
Well, I take little pride in having stumped the forum-- at least I didn't get a "learn to search" response.
In the end I have solved the problem by using Chome Configuration to remap the second softkey for the Wireless Manager option under Settings from "All Settings" to "Wireless Toggle". This spares me from having to open HTC Communication Manager and scrolling around to enable wifi-- a pretty significant improvement for me.
Thanks,
Gnat
Glad you worked it out and didn't get use the search as it's not an answered question not many people use AEButton on smartphone and defo not in sticky
If you want a guide still of how to use AEButton i could run you off some screenys to demonstrate as it's an amzing bit of kit.
stylez said:
If you want a guide still of how to use AEButton i could run you off some screenys to demonstrate as it's an amzing bit of kit.
Click to expand...
Click to collapse
Don't know if you are still reading this, but if you know of a tutorial or guide to AEB, please share it.
I'm trying out the app right now, but find it extremely difficult to figure out, how to use it. And the author included no guide nor help file with the app. And his web page doesn't tell you how to use it.
One other concern--it seems to slow down the device a whole lot!

AT&T Tilt2 Bloatware

AT&T, in their typical way, pre-loaded the Tilt2 with tons of garbage bloatware. Free RAM is patheticly low, as is the roughly 100MB of storage space....
Is it possible to go about deleting stuff thats pre-installed, or is that going to require flashing a custom ROM?
Are there any ROM's available yet which keep all the critical components but remove all the garbage stuff so a user can choose to reinstall only what he wants via cab?
I sympathize with you on that. I couldn't take not being able to have more than 2 programs open without the task manager killing them. I ended up flashing to the latest NRG rom. The 2 tab opera limit was insane too.
I must say that the frustrations with doing this now include some keyboard functionality lost and the loss of the good ATT software. For instance, I can't download the ATT WiFi Hotspot software because I lost my ATT Media Mall.
Are you by chance able to post your opera proxy settings. I can try and grab the cab once I have these settings and share it with the forum.
Easiest way is to find opera.config or opera.ini and see if the settings are in there and copy to the forum. Also found if you type in opera:config in your address bar and look under proxy.
Got these settings from a FUZE forum post:
[Proxy]
Use Proxy On Local Names Check=1
HTTP Server=wireless.cingular.com
HTTPS server=wireless.cingular.com
Use HTTP=1
Use HTTPS=1
Enable HTTP 1.1 for proxy=1
Seems to have done the trick. I'll upload the ATT Wifi Cab tonight when I'm home.
Yea, I've also gone to the NRG ROM.... SO MUCH faster and so much more free RAM & ROM its insane.
its a real shame ATT loads so much junk on the phone. I know all carriers love to do that, but it just seems like the Tilt2 is particularly polluted with crapware.
Anyhow, now I'm happy...
I sure miss AT&T
Just got my TP2 a few days ago and loaded the NRG Photon rom yesterday... Soo much faster than the AT&T rom... I did forget about the AT&T Wifi software though... There anyway to get that software back? Anyone have the cabs? Just fyi, there's an AT&T Keyboard fix cab out there now, just doesn't map the OK button...
rkub said:
Just got my TP2 a few days ago and loaded the NRG Photon rom yesterday... Soo much faster than the AT&T rom... I did forget about the AT&T Wifi software though... There anyway to get that software back? Anyone have the cabs? Just fyi, there's an AT&T Keyboard fix cab out there now, just doesn't map the OK button...
Click to expand...
Click to collapse
had to jump through some hoops to get it downloaded, I attached the cab in this post;
http://forum.xda-developers.com/showpost.php?p=4748989&postcount=6
I have installed it, but haven't actually tried it out yet at a hotspot.
For you folks that installed the NRG rom: Did you find a keyboard .cab for the Tilt2 that is 100%?
The existing keyboard cab fixes 98% of the issue.
The two buttons that dont map correctly are
1) OK button on the keyboard
2) PTT buton (below the volume on the side)
Both can be fixed by using Keyboard Config controller (do a search). I've been able to remap the PPT button, just waiting on someone to explain what to map the OK button to.
So ya, its a 2-step process but it can be 100% correctly functioning with the NRG or any other custom rom
I will be getting Tilt 2 & selling in Dec 1st week
Anyone who Dont want to Pay Full price can buy from me for Cheaper
Cos I will be buying HD 2
If anyone Interested
rajuabju said:
The existing keyboard cab fixes 98% of the issue.
The two buttons that dont map correctly are
1) OK button on the keyboard
2) PTT buton (below the volume on the side)
Both can be fixed by using Keyboard Config controller (do a search). I've been able to remap the PPT button, just waiting on someone to explain what to map the OK button to.
So ya, its a 2-step process but it can be 100% correctly functioning with the NRG or any other custom rom
Click to expand...
Click to collapse
I also used Keybaord Config to remap thoses buttons but I remapped ok to ctrl so I could do copy and paste.
areilly said:
had to jump through some hoops to get it downloaded, I attached the cab in this post;
http://forum.xda-developers.com/showpost.php?p=4748989&postcount=6
I have installed it, but haven't actually tried it out yet at a hotspot.
Click to expand...
Click to collapse
Thanks for the cab areilly, haven't been able to try it out yet, but will let you know if it works when I do...
ilordvader said:
I will be getting Tilt 2 & selling in Dec 1st week
Anyone who Dont want to Pay Full price can buy from me for Cheaper
Cos I will be buying HD 2
If anyone Interested
Click to expand...
Click to collapse
How much cheaper?
rajuabju said:
The existing keyboard cab fixes 98% of the issue.
The two buttons that dont map correctly are
1) OK button on the keyboard
2) PTT buton (below the volume on the side)
Both can be fixed by using Keyboard Config controller (do a search). I've been able to remap the PPT button, just waiting on someone to explain what to map the OK button to.
So ya, its a 2-step process but it can be 100% correctly functioning with the NRG or any other custom rom
Click to expand...
Click to collapse
I remember reading somewhere else that people were mapping the OK button to some command like "Go Back" which some felt was the closest approximation to the OK button. As for the PTT button, a lot of people (including myself on the stock ROM) have mapped to the camera.
pinoymutt said:
I remember reading somewhere else that people were mapping the OK button to some command like "Go Back" which some felt was the closest approximation to the OK button. As for the PTT button, a lot of people (including myself on the stock ROM) have mapped to the camera.
Click to expand...
Click to collapse
I mapped my PTT to screen rotate.
I'm finding that even with the latest cab, you still have to remap your bottom row function shortcuts. However, the biggest bother is that on the unlock screen and certain other applications, the top row is still read as the default TP2 number row. Perhaps we're still missing some settings.
thedon0369 said:
I mapped my PTT to screen rotate.
Click to expand...
Click to collapse
I did this myself at one point, but then had to do a hard reset. Now I don't have screen rotation as an option in the Settings -> Personal -> Buttons dialog, and I can't remember what I might have done to enable it. Help! (please)
[ edit ]
OK, either I'm blind or I did something, 'cause now the option is there.
i found a solution for the "ok" key..
you map the "ok" key first for anything on the Keyboard control/config program, update config, then uncheck the box and update again...
THEN, download AEB button Plus and install that, press add new key, press the ok key, and map that to "ok/close"... soft reset, and you're good to go, just dont mess with "ok" button on keyboard control program and you're good to go...
i also mapped long press on the "ok" key to open notes,
okay, folks, we're in business. a very kind soul named pyromosh has written software named Crud Scraper - automatic uninstaller. it does all the work for you. here's the link:
forum.xda-developers.com/showthread.php?t=587637
ruxp1n said:
okay, folks, we're in business. a very kind soul named pyromosh has written software named Crud Scraper - automatic uninstaller. it does all the work for you. here's the link:
forum.xda-developers.com/showthread.php?t=587637
Click to expand...
Click to collapse
Yes Crud scraper works very good
here is the active link forum.xda-developers.com/showthread.php?t=587637
and here is a page of all the Crapware and what it does how big and how to manaully remove it - http://wiki.xda-developers.com/index.php?pagename=UninstallingTilt2Software

aDosbox fixed for G2 keyboard

https://docs.google.com/leaf?id=0B1VD5urJF8c-YzMxOWNlYWYtODFhMi00NWRkLWIyMzMtMDU3YTExM2RlNjli&hl=en
It is the latest updated version of Dosbox from adosbox.googlecode.com, with keys mapped to match the G2 keyboard. It's my first actual packaged Android app, so hopefully I didn't screw anything up.
Mouse support is disabled, only the left ALT key works to access extended characters, and the ALT key seems to become stuck if you hold it down for too long, but you can un-stick it by pressing it once and releasing.
The track pad is a little too sensitive for my liking, but a few CGA games I tried seem to work well (Telengard, Ultima IV, Legacy of the Ancients.)
You'll need to put DOSBOX.CONF from adosbox.googlecode.com in the root folder of your sdcard.
I don't make any promises as to whether this works or how well it works!
*edit*
Just to clarify, this is not MY port, all I did was take someone else's hard work and fix keymappings for the G2.
Also, no matter what you set the CPU cycles to, it seems to run as fast as it possibly can. It consumes 100% CPU usage and does not hibernate in the background when you switch apps, so be careful!
*/edit*
sweet!
DOSbox!
thx
Has this worked for anyone?
This worked for me, which is great. Made it easier to play with.
It is a tad slow, and there is no sound, but hey, it's dosbox on a friggin cell phone!
The real problem with this port is the lack of a good way to do savestates in DosBox. Since the video hardware can be weird and restoring its state can be tricky there is no official support for saves states in DosBox at all, although there have been some patches.
Anyway, I'm getting off topic here. Thanks for the work fixing the keyboard.
How did you do this? I have a motorola Flipside and I would like to fix the adosbox key mappings for it. Is there anything I can do with settings like the Mapper.txt file, or does it require modifying the code? (I know its not the best phone but my family is on att and they are paying the bill)
I was able to work around not having colon by using this keymap file: http://forum.xda-developers.com/showthread.php?t=837002 and then changing SEARCH to SEMICOLON
Other then this i didn't see any other characters that weren't there (even though some were presented incorrectly)
I am new to adosbox, does this mean I could finally run windows 3.1net on my G2? Lookout ms paint, here I come!
Wait, no mouse? Bummer.
Sent from my HTC Vision with CM 6.1 and Pershoot's Kernel.
keenerb:
How did you modified the bindings? I've changed left and right arrow keys mappings to shift and dot in mapper-0.74.map but it has disabled trackpad x axis
And do you know which codes have these two shortcut keys (that ones with three dots and numbers)?
I'm trying to remap keys for adosbox 0.2.5
Greetings.
----------edit---------
I've managed to change the:
Left FN - it's recognised as Left alt key
Left Shift
Tab
...as 3 of 4 arrow keys.
This disables trackpad scrolling however.
But it let's for playing dos games like Hocus Pocus and so on where you need arrow keys.
Do you (or anyone) know what are the numbers of following keys?:
Keyboard menu key
Shortcut key 1
Shortcut key 2
Search key
Sym key
We've got much room to bind.
Or maybe anyone knows where or how to check those numbers?
I know you are not the original author of the android port of DOSBox but I just cannot get any replies from the person listed as the author and I need to find out how to change things like the display resolution, etc.and thought you might know.
I have a dos program that runs fine on my DOSBox 0.74 installed on my Windows 7 laptop. But every time I try to run it on aDOSBox installed on my rooted android 2.3.4 phone, aDOSBox crashes and throws me out into android. I need to find out how to find out what is causing the crash. I think it might be the display but am not sure. Can you help?
Thanks.

Categories

Resources