I hope starting a new thread is the way to go on this...
I just updated to the new Sprint Official WM 6.1 ROM, and immediately could not connect to the internet.
I tried running the IOTA automatic data provisioning update (Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start) and it failed repeatedly with a 1012 error. As was posted by others, I noticed that there was a "CurrentUserName" setting in Start->Settings->System->Device Information that had [email protected] where I would have expected to see [email protected] instead. (that would have been my Sprint provided email address) The first thing I tried was to go to the phone dialpad and dial ##3282# to start the EPST program and check my data provisioning settings (this requires that you know your MSL - Master Service Lock Code - if you are going to edit). UserName was blank there, so I tapped the blank setting and held down until an "EDIT" menu popped up. I tapped "EDIT" and changed it to the previously correct [email protected] value. After saving changes and another reboot, I still could not connect to the internet, run IOTA, and the "CurrentUserName" was still wrong. After searching through various settings looking for a way to change the currentusername, I installed PHM Registry Editor and searched again.
In HKEY_LOCAL_MACHINE/Software/OEM/DIM there is a key "EnableCurrentUserName" and it was set to 1. I edited that and set it to 0, exited the Registry Editor, and restarted the device by holding the power button until it warned me about shutting down. I tapped "Yes" and it shut down and restarted. The "CurrentUserName" setting no longer appeared in the Device Information page. At this point I was able to run IOTA successfully and imediately after that I could use the internet and other data services.
I hope this helps someone. Sorry to be so long winded, but I was trying to answer as many "How? Where?" questions as I could as I went.
Briefly:
1. Using WM Registry Editor software, change HKLM/Software/OEM/DIM/"EnableCurrentUserName" from 1 to 0 then save changes and exit editor.
2. Dial ##3282# and edit UserName to correct [email protected] address. Device will reboot when you exit and save changes.
3. Run IOTA by going to Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start
Thanks to all the others here who have helped me along the way,
Scruffy
anyone else know if this works?
i just flashed the new sprint rom and now the data connection does not work.. no internet.. ? I was just wondering if anyone else had this problem and does this fix it?
After some more time with this ROM installed I have found that it is not neccessary to change the ##DATA# (##3282#) user name settings. Just change the HKEY_LOCAL_MACHINE/Software/OEM/DIM/EnableCurrentUserName value to zero, save changes and then you can run the IOTA update successfully (or at least I can).
I have found that I need to do this every time I do a hard reset of my device. I hope this helps someone else.
Scruffy
this did not work for me.. I Get error code 67
i started a new thread here........ http://forum.xda-developers.com/showthread.php?t=415666
so maybe someone will chime in... the ##3282# does not work for me at all.. you hit that on the dial pad and nothing happens... so i can not access that menu...
For now i went back to a OEM rom and called sprint and they got me working by doing a MASTER RESET... also ##3282# works on OEM roms but i think the file EPST.EXE is missing from the CUSTOM roms... any input would be great..
Not working for me.
i'm sure a master reset from within #778 or whatever would work but i don't feel like
putting in the data again.
Scruffy said:
I hope starting a new thread is the way to go on this...
I just updated to the new Sprint Official WM 6.1 ROM, and immediately could not connect to the internet.
I tried running the IOTA automatic data provisioning update (Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start) and it failed repeatedly with a 1012 error. As was posted by others, I noticed that there was a "CurrentUserName" setting in Start->Settings->System->Device Information that had [email protected] where I would have expected to see [email protected] instead. (that would have been my Sprint provided email address) The first thing I tried was to go to the phone dialpad and dial ##3282# to start the EPST program and check my data provisioning settings (this requires that you know your MSL - Master Service Lock Code - if you are going to edit). UserName was blank there, so I tapped the blank setting and held down until an "EDIT" menu popped up. I tapped "EDIT" and changed it to the previously correct [email protected] value. After saving changes and another reboot, I still could not connect to the internet, run IOTA, and the "CurrentUserName" was still wrong. After searching through various settings looking for a way to change the currentusername, I installed PHM Registry Editor and searched again.
In HKEY_LOCAL_MACHINE/Software/OEM/DIM there is a key "EnableCurrentUserName" and it was set to 1. I edited that and set it to 0, exited the Registry Editor, and restarted the device by holding the power button until it warned me about shutting down. I tapped "Yes" and it shut down and restarted. The "CurrentUserName" setting no longer appeared in the Device Information page. At this point I was able to run IOTA successfully and imediately after that I could use the internet and other data services.
I hope this helps someone. Sorry to be so long winded, but I was trying to answer as many "How? Where?" questions as I could as I went.
Briefly:
1. Using WM Registry Editor software, change HKLM/Software/OEM/DIM/"EnableCurrentUserName" from 1 to 0 then save changes and exit editor.
2. Dial ##3282# and edit UserName to correct [email protected] address. Device will reboot when you exit and save changes.
3. Run IOTA by going to Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start
Thanks to all the others here who have helped me along the way,
Scruffy
Click to expand...
Click to collapse
how do i find [email protected] where would that be?
Scruffy said:
3. Run IOTA by going to Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start
Click to expand...
Click to collapse
I just upgraded to NFSFAN's latest ROM, everything went well but I can not get my internet to work. The one thing I did notice is under the services tab, internet is not an option. I loaded the dcd sprint carrier 20090714 cab am I missing something else?
Thank you for any help you can provide.
Update:
Well I went back and flashed to the HTC 6.1 rom, then back to the 6.5 rom. That fixed my internet issues, but that option is still missing for me. Then after all of that my MSID was really screwed up. Everything seems to be good now.
please please help me clear the instructions
i have a horribly vague idea of what i need to do, to get the internet working again.
i already got the IOTA_1120 zip file in my cell but when i even try to open it up it says that there is no application that is related to to it, so i must start this application and open up the file from within. How do i do this? am I even doing what im supposed to??
Where exactly is HKEY_LOCAL_MACHINE/Software/OEM/DIM and how do i get there???
if you could please instruct me with simple stieps i would greatly appreciate it, simple being like start>program files> etc.
please help i am one step away from smashing this damm cell into the wall
electricfeel_2012 said:
i have a horribly vague idea of what i need to do, to get the internet working again.
i already got the IOTA_1120 zip file in my cell but when i even try to open it up it says that there is no application that is related to to it, so i must start this application and open up the file from within. How do i do this? am I even doing what im supposed to??
Where exactly is HKEY_LOCAL_MACHINE/Software/OEM/DIM and how do i get there???
if you could please instruct me with simple stieps i would greatly appreciate it, simple being like start>program files> etc.
please help i am one step away from smashing this damm cell into the wall
Click to expand...
Click to collapse
The path of HKEY.... is actually on the registry. You need to use a registry editor (like PHM Regedit) to make the necessary changes to the registry. I would recommend you to re-read those instructions as they will not get any easier than that. Alternatively, if you are on Sprint's official rom and have absolutely no clue what you are doing, you can always call them and ask them for help.
As far as the IOTA zip file, if you cannot open it, that means that you do not have any program to extract from compressed files in your device. Your best bet is to transfer the file to the desktop and extract it there. Once you are done, place the extracted contents back in the device and run it in there.
I've recently flashed my Orange UK diamond from the original Orange ROM to a cooked ROM, and since the update I've been unable to Lock Device... a long end key press makes the screen flash and return to the Touch Flo home page, but the device remains on, without keys locked. If I change the Long Press End Key option to display Quick List, then tap Lock Device the same thing happens. I've seen a couple of posts with the same issue, but no resolution.
My upgrade path was as follows:
Original Orange UK stock ROM
Unsigned-Hard-SPL-Diamond-OliNex
Diamond_Radio_1.00.25.05
SwiftBL-WWE-Diamond-ROM-v6.2-Full
Duttys_Diamond_5.2.20748_V1_9_Radio_1.00.25.07_Full
SwiftBL-WWE-Diamond-v6-5-Full-16MbPP
I tried Key Lock on the last 3 ROMs none of them worked (one of the reasons I tried the other two ROMS after 1st flash). I didn't try key lock after the Hard-SPL flash, so maybe an issue with Hard-SPL?
Does anyone else have this problem? Anyone got any suggestions on what might be the problem? Any other information I could supply to make this easier to diagnose?
Sorry if I've posted this incorrectly, but I'm a newbie to these forums!
Cooks can change settings. Maybe the set locking off. Download advance config and enable locking. It can be found here: http://www.touchxperience.com/en/advanced-configuration-tool.html. Look under section "screen".
I've had a look at the Advanced Config program. I enabled the "Auto Device Lock" option. This password locks the device when it's turned off for more than 5 seconds, but I only really wanted the key lock option (where a password is not required). Any other ideas?
Need a clean i637 WM 6.1 or WM 6.5 Rom
Because my phone is OS killed. (device has a lot of errors )
I can't find any ROM in the web.
Help me !
Thanks in advance
Have you use the hard reset or Master clean?
crt60 said:
To reset the handset’s factory settings, via buttons, follow the steps below:
WARNING: This Reset will Delete ALL added Data from the Handsets Memory
When the handset is powered off, Press and Hold the 5 key then power on the handset
Press either the 1 key (Master Clear) or 2 key (Master Reset) at the Format Menu screen then press the Y key (Yes) at the confirmation prompt
ADMIN settings-
You do not have to unlock security on the phone to be able to do this...
1) From the home screen type in *#1546792*#
2) pick 3 for network and call settings
3) Set network order to Auto, and network mode to auto
Click to expand...
Click to collapse
copyed from other......dont know can help you or not....
Will, I just try these on my i637, It works......I don't know how about yours...
I wonder if someone can help me with this one...
For some unknown reason (honestly!), when I put my phone into standby, or soft-reset the device, the 'On Battery Power - Turn off backlight if device is not used for' resets itself to 10 seconds.
This is under- All Settings > System > Power > Advanced Tab
No matter which option from the drop-down I select 30 sec, 1 min, 2 min, etc., when the device is powered back up, the system has reset to 10 seconds.
1. Is this a known issue (not so important but still interested to know)
2. Is there a solution/fix aside from Hard Resetting (very important!)
Many thanks in advance for any help.
I experienced this with BareNaked ROM. Have you tried changing the actual registry values or just from the settings page?
burtonsnow8 said:
I experienced this with BareNaked ROM. Have you tried changing the actual registry values or just from the settings page?
Click to expand...
Click to collapse
Hi, thanks for the prompt response.
I havent tried the registry yet; can you prompt me as to which reg settings to change?
Im currently running windows 6.5 official ROM.
Many thanks.
i moved from 1 operator to another and when finished config. the new APN and saved it, i found out that there is no button to press on to make it green so the my HD cann't use that APN
pls advice
thanks
(i don't have any roms what so ever on the device, plane as i got it )
Hey...if you have more than one, you can select one of them...if ther is only one, the phone uses it.