I've recently flashed my Orange UK diamond from the original Orange ROM to a cooked ROM, and since the update I've been unable to Lock Device... a long end key press makes the screen flash and return to the Touch Flo home page, but the device remains on, without keys locked. If I change the Long Press End Key option to display Quick List, then tap Lock Device the same thing happens. I've seen a couple of posts with the same issue, but no resolution.
My upgrade path was as follows:
Original Orange UK stock ROM
Unsigned-Hard-SPL-Diamond-OliNex
Diamond_Radio_1.00.25.05
SwiftBL-WWE-Diamond-ROM-v6.2-Full
Duttys_Diamond_5.2.20748_V1_9_Radio_1.00.25.07_Full
SwiftBL-WWE-Diamond-v6-5-Full-16MbPP
I tried Key Lock on the last 3 ROMs none of them worked (one of the reasons I tried the other two ROMS after 1st flash). I didn't try key lock after the Hard-SPL flash, so maybe an issue with Hard-SPL?
Does anyone else have this problem? Anyone got any suggestions on what might be the problem? Any other information I could supply to make this easier to diagnose?
Sorry if I've posted this incorrectly, but I'm a newbie to these forums!
Cooks can change settings. Maybe the set locking off. Download advance config and enable locking. It can be found here: http://www.touchxperience.com/en/advanced-configuration-tool.html. Look under section "screen".
I've had a look at the Advanced Config program. I enabled the "Auto Device Lock" option. This password locks the device when it's turned off for more than 5 seconds, but I only really wanted the key lock option (where a password is not required). Any other ideas?
Related
I lock my PDA during the day so co workers don't mess with it, but I used a password I forgot, I need to do a complete reset to get past the password, can anyone help me? Please I miss my phone.
Thanks,
Joe
i get same problem last day on my SX66, maybe you can try to do this hard reset as instruction below, backup your data first before perform it, hope will help you
HARDRESET 101
Steps...
1. SoftReset
2. When the three color stripes(four including white) appear QUICKLY press and hold Record and Camera button.
3. If a menu appears... (if not softreset again while holding Record+Camera)
use Record To NAVIGATE the three items and Camera to TOGGLE Yes/No
4. Press Mail button to Execute the Instructions.
Hi,
this afternoon i was trying to flash the ROM of my LG KS20 when i read the combination to enter in the engineering menù. So i looked a bit through the different menus until i click on "Backlight On-Off" option in the "LCD Test" menu.
At this point, the screen on my LG turned off and now i can see that phone still working but the screen remains always black. For example if I click the power button on the right of PDA, the 2 button turn their light on but the screen remains black.The same is when i push the button of photograph machine...if I wait a few second and push again the button the PDA take a photograph because the flash work and i can hear the sound of shutter.
I try to hard reset the PDA, but all remains the same....what can I do???
Please help me
Thans a lot
Maybe you could try to install a software called "My Mobiler" (http://www.mymobiler.com - it's freeware). With this software you could access your KS20 through your PC and try to revert the settings in the LCD Menu?
thanks a lot....last night I found MyMobiler searching somethings for view the device screen on my desktop. After I installed it on my PDA (with some little problem to give the ok for the installation on PDA), I can see the device desktop and so I do the same procedure to restore the backlight.
So now all works fine.
Thanks
Have the same problem
but i not lucky... can't press ok on the black screen, can you publish screen with instalation on PDA to try locate the OK??
really thanks
On your screen, you should see the standard view of the installation process.
So, when you launch the install from your pc, you have to immagine the screen of the acknoledge of the install. try to push in the left corner at the bottom a couple of time, then you shoud see the today screen on your pc.
Same problem
I have the same problem, but I need to enter my pin, but I'm not able to enter it because I can't see anything...
And I change the USB settings in the engineering menu so I cannot connect with ActiveSync :S
Any idea?
Thanks a lot.
I wonder if someone can help me with this one...
For some unknown reason (honestly!), when I put my phone into standby, or soft-reset the device, the 'On Battery Power - Turn off backlight if device is not used for' resets itself to 10 seconds.
This is under- All Settings > System > Power > Advanced Tab
No matter which option from the drop-down I select 30 sec, 1 min, 2 min, etc., when the device is powered back up, the system has reset to 10 seconds.
1. Is this a known issue (not so important but still interested to know)
2. Is there a solution/fix aside from Hard Resetting (very important!)
Many thanks in advance for any help.
I experienced this with BareNaked ROM. Have you tried changing the actual registry values or just from the settings page?
burtonsnow8 said:
I experienced this with BareNaked ROM. Have you tried changing the actual registry values or just from the settings page?
Click to expand...
Click to collapse
Hi, thanks for the prompt response.
I havent tried the registry yet; can you prompt me as to which reg settings to change?
Im currently running windows 6.5 official ROM.
Many thanks.
Hello, this is my first time posting here. I was having some trouble with the touch screen not being responsive enough, sometimes missing my taps. So I installed this mod: http://forum.xda-developers.com/showthread.php?t=2347009&page=3
Not only did it not appear to change anything, after rebooting I found that my menu and back button no longer vibrate like they should (yes vibration is on in settings) and my q-button no longer does anything. And my home key does not turn the screen on now either. This has to be a simple key configuration change but someone please help me fix this issue Oh also I have the at&t version of the phone if that makes a difference.
Edit: I have found more information about this problem. One being that the mod I spoke of only changes the usr folder of the system folder which contains the key mappings gk-keypad-8064.kl file. I tested and trying to change the QuickButton command in the settings no longer affects this key mappings file as I believe it should. So somehow it either can't find the file (even though it's there) or thinks that the file is corrupt. So is there anyone who has the stock gk-keypad-8064.kl file I can use? Or maybe there should be different permission settings other that rw r r? Please let me know as I think this is the main problem here.
xlJohnnyIcelx said:
Hello, this is my first time posting here. I was having some trouble with the touch screen not being responsive enough, sometimes missing my taps. So I installed this mod: http://forum.xda-developers.com/showthread.php?t=2347009&page=3
Not only did it not appear to change anything, after rebooting I found that my menu and back button no longer vibrate like they should (yes vibration is on in settings) and my q-button no longer does anything. And my home key does not turn the screen on now either. This has to be a simple key configuration change but someone please help me fix this issue Oh also I have the at&t version of the phone if that makes a difference.
Edit: I have found more information about this problem. One being that the mod I spoke of only changes the usr folder of the system folder which contains the key mappings gk-keypad-8064.kl file. I tested and trying to change the QuickButton command in the settings no longer affects this key mappings file as I believe it should. So somehow it either can't find the file (even though it's there) or thinks that the file is corrupt. So is there anyone who has the stock gk-keypad-8064.kl file I can use? Or maybe there should be different permission settings other that rw r r? Please let me know as I think this is the main problem here.
Click to expand...
Click to collapse
How about you try to flash back to the stock rom using the lg flash tool?
I fixed it with a work around. I used exposed additions to force haptic feedback and also to map the q button key. Hopefully if anyone else has this problem it will help them.
Hey Everybody
I have troubles since i clicked a button in my status bar. I removed EVERYTHING from my home and lock screen (i cant even tell witch one i see). There are no Icons at all. only my desktop background is visible and working (animated bubbles). there is no button working except from power button (and its menu to restart). a friend of mine was able to get a screenshot with some button-combination (vol+ + home?)
first: i am not an expert with android, but have a lot of experience in working with Linux shells.
what i have done:
maybe it has something to do with it or not, i don’t know:
i enabled multi view / multi window or extended desktop (sorry i don’t know the name, and as there is nothing shown...)
i opened my status bar and there were some new icons (next to the small watch in the right corner), witch i haven’t seen so far and clicked it. than it opened a "new" screen with only my background.
as i thought it is maybe only a "dead" app i tried to restart my phone. but: there is only that screen working. no PIN question, or something.
i tried to reset dalvic and normal cache. -> no change.
i use RESURRECTION REMIX 5.7.3. on N7100
Recovery TWRP 3.0.2-0 is still working and
i hope somebody can help me to solve my problem without factory resetting. i wont reinstall everything.
thanks a lot
Are you able to restore a TWRP back up? You could try flashing the ROM again without wiping.
theoretically, yes, but i did not have on. so i cannot flash it.
i am searching for an commandline option to change the settings. but i have no clue where to search, and in what files the configuration lies...