Just flash wm6.1 and i found that when i press the on/off button to turn off screen, all other button can turn on screen and call the application i assigned.
Is it possible act like this? when I turn off screen, all other button are useless until i press on/off button to turn on screen, those button are work to call the application I assigned?
change registry? have setting which I missed?
Thanks in advanced.
jc917 said:
Just flash wm6.1 and i found that when i press the on/off button to turn off screen, all other button can turn on screen and call the application i assigned.
Is it possible act like this? when I turn off screen, all other button are useless until i press on/off button to turn on screen, those button are work to call the application I assigned?
change registry? have setting which I missed?
Thanks in advanced.
Click to expand...
Click to collapse
go to settings -> tab system -> key lock
activate "lock all buttons except power button"
there is a new version of AE Button! The Button map application! Any experiences? Is there an improvement for the HD? Let´s test
Anyone tried?
I wish to know too =)
Is it free?
I have this registered.
The unregistered version is actually almost fully functioning and well worth trying.
I choose to register since I found the application useful and it seemed fair to pay the developer.
THANKS, for the new version alert. But, I suspect there is little new as the history details for this version are:
02.02.2009(v2.6.6):
Fixes:
Backlight works on HP 612c now
Languages:
Updated Traditional Chinese resources (thanks to Chow Yuh)
AE Button
I find this software very useful. It completely eliminates the need of locking/unlocking software for me.
I just set double or triple tap to answer and hang up keys. This will prevent accidental key press when taking HD out of pocket. To answer call, simple double/triple tap on answer key or simply slide on screen to answer (built-in screen lock will be unlocked during incoming call).
Set press and hold volume up to toggle wireless and down to toggle bluetooth.
This one single software solved all my screen locking + lack of buttons issues!! Believe me i tried touch lock pro, sensor lock, slide to unlock and what ever you can think of (I didnt like because I think its not really practical for me to be rolling phone 180 degrees or shaking back n fourth in meetings to answer a call.)...I know you guys may argue it has light sensors to unlock, but I'll be in meetings and presentations which might be low light conditions. I do not want to set very small for polling interval either. If you have tried all else, no harm in trying this.
if you guys face the same problem like me, this tiny software might be the right solution for you.
The best combination for me:
Gyrator2 (fine tuned based on my apps) + Lumos + AE Button Plus + Touch Response (for onscreen keypress only).
The only flaw that i could find to complain is that they should really change the icon...it looks like bread/potato/or whatever...
Headset Buttons
Hi there,
is this program able to capture the button press events from a headset wired/wireless?
What I'd like to achieve is, to switch to the next song in Mediaplayer as long there is no incoming or active call.
Is that possible?
Thx in Advance
Steve
noctifer said:
Hi there,
is this program able to capture the button press events from a headset wired/wireless?
What I'd like to achieve is, to switch to the next song in Mediaplayer as long there is no incoming or active call.
Is that possible?
Thx in Advance
Steve
Click to expand...
Click to collapse
Hi, I believe not. I understand the press events from headsets and bluetooth AVRCP are actually trapped in the hardware by HTC and by-pass the operating system and are sent directly to TF3D music or WMP.
If you check on the AEB plus site: http://ae.inc.ru/ it says the app is not for specific applications.
(Also: the AEB+ icon does look like a loaf of bread !!)
Will it allow me to remap the Home button on the Touch HD?
CorruptedSanity said:
Will it allow me to remap the Home button on the Touch HD?
Click to expand...
Click to collapse
Nope. All the others but not the home button.
I have:
1. volume up. 1 press = arrow up, 2 press = volume up, long press = plamp (flash light)
2. volume down. 1 press = arrow down, 2 press = volume down, long press = resco notes recorder (auto)
3. OK / back. 2 press = rotate screen 90 deg
I keep the long press on phone end and long press on phone start handled by the system.
Dave, thanks a lot and you have some very smart short cuts
I may very well adopt them too.
CorruptedSanity said:
Dave, thanks a lot and you have some very smart short cuts
I may very well adopt them too.
Click to expand...
Click to collapse
Thanks, but I'm needing a suggestion for replacing the flash light. Never used this now "for real" so I shall find something else for the long volume up press ...
I have almost identical settings but use the long up as a bluetooth toggle. This is a fantastic program and really eliminates one of the few shortcomings of this phone.
Cheesy Dave said:
long press = plamp (flash light)
Click to expand...
Click to collapse
do you know where i can get this plamp please?
P Lamp v1.5 http://pda.jasnapaka.com/plamp/
Question guys,
How do I map the call button to long press (like the smallest long press ever) to get the Start menu?
Thanks
Sorry, I don't understand what you want. Is "call button" the "end call" or "start call" ?
Dave, call button is the left-most button that answers/makes a call. If it were colored, it would have been green.
I want to short press it to start menu (heres the tricky part, I have Quick Menu as my start menu).
Basically I miss the Start button from my TyTn II (Kaiser) and the scroll on the top. I have managed to set the volume buttons as scroll up/down and want the start call button to imitate the start menu button when I long press it. But I want to long press it for as little time as possible. So say 1 second as opposed to 3 seconds.
I see. So, two points:
1. Get quick menu
2. Use a "short" long press
I asked because the green/start left button is assignable in the standard settings - button to the <start menu> but I don't know how to do this to quick menu. I guess if you make a short cut to quick menu and drop this somewhere in the Programs folder in windows (or a sub-folder) then the standard settings - button should find it OK.
But, for option 2 I have no idea. Instead of the "short" long press how about using AEB+ with a double press ?
Dave, I see from the options that you can set the delay. I guess this from the "Key Press timeout" menu where you can select units of time starting with 200ms to 900ms. I am guessing that 200ms of time needed for a long press would be the shortest longpress possible.
Any how, how to assign the green button to start menu? It doesnt work for me. I have it as 2 presses or 3 presses or long press for start menu but nothing happens.
one problem it works to rotate(volume up which i assigned) but as soon as i make a call or recieve a call it no longer works untill i soft reset???? im i missing a setting or something? i have duttys rom, please help! : ) thanks!
Hi all,
looking for a sotware that lock the hardare button when I receive a incoming call. These buttons are really sensible and you can accept or refuse the call very easily when you take the phone from your pocket.
I want a software just for this or "how to" disable the virtual buttons for incoming calls.
I dont want to try S2U2 because has is own background and I want to maintain the WM 6.1 "today" screen.
any suggestion? thanks in advance.
Try this http://forum.ppcwarez.org/viewtopic.php?f=47&t=90739
I have found the solution.
AE Button Plus
http://ae.inc.ru/aebplus.php
with this software you cam map de actions of your hardware buttons. So I did the following configuration.
Green Button.
1 keypress = do nothing
2 keypress = do green button defalt action.
the same for the red button, now I have to press twice the green buton to accept an incoming call and twice the red to refuse.
Fantastic and simple.
http://www.zuinigerijder.com/
I use this one:
http://forum.xda-developers.com/showthread.php?t=556801
How to Disable button from picking up call?
(only use screen to pick up instead of keypad)
any idea?
Hi, since I cannot go to a local store and physically touch the 5T, I have a Question:
1. The Button on the right side in the middle is the power button is this correct ?
2. There is another button on the top left, that looks like a switch in the pictures on Goolge.
2.1 How does this Button work, can you put it in two positions ? Or does it automatically slide back with a spring ?
2.2 What is the default functionality of this button on the top left ?
3. The Volume Key is one single key that you can press in two directions ( Up and Down ) correct? ,
3.1 It is not possible to simulate a up + down at the same time to give it a "third" key behavior ?
The button on the top left is an alert slider that can switch between three modes, ring, do not disturb and silent. You can press volume up and down at the same time, not sure if you can bind it to a function. The button on the right is the power button.
1. Correct, that's the power button.
2. The switch is an alert slider and it has three positions. The lower position is ring, do not disturb and silent or vibrate mode.
Putting the switch on ring means you get all the regular phone rings and alerts.
Putting the switch on do not disturb puts the phone in a non ringing, non vibrating mode.
Putting the switch on silent means the phone will not ring or give you audible alerts but will still vibrate when you receive a call, text or other type of alert.
The switch does indeed stay in place where you put it until you switch it to another position. Also, you can control certain settings within do not disturb and vibrate modes. In the photos I attached you can better see what options you have for those settings.
3. The key indeed is one single button, however you can press both up and down at the same time if you want to.