Is there any programm which can pretend a call in order to realise audio playback and track skipping via bluetooth? Is this technically possible?
Related
In my older pocket pc's using Windows 2003SE my headset played music/any recorded sound and recorded sound through the bluetooth headset mic but now in WM5 EDR bluetooth headset is needed and the mic does not record on the headset.
Was this deliberate by the developers to have us have to buy a new edr headset or just missed or necessary to improve bluetooth?
I miss using my bluetooth headset as a wireless mic and to listen to music. I could start and stop recording using button control as well. I uses resco audio recorder to record.
Is the a work around or radio rom upgrade that will allow this to be done?
I'm using MVC to enable me to use handsfree dialling with my car's bluetooth, however to make it work properly I need to have the "Play system sounds on remote hands-free device" checked. But then the music plays over the vehicles bluetooth and not through the audio out from the phone.
Is there a way to stop music on the bluetooth in this situation.
Thanks,
Greg
Hi all, i'm about to /buyfit a CK3100 but does anyone know if the satnav apps like copilot will route the audio instructions through the stereo ? And if so, does it mute the stereo each time it does?
Unfortunately, it doesn't. The parrot just handles audio related to phone calls. It doesn't work for navigation instructions, music and other sounds. (EDIT: Read your other post.. I've only tried navigation with Google maps so far, so I wouldn't know about any other navigation apps)
Whenever I use my Desire in the car, I hook up a cable between the headphones jack and the car stereo. This results in:
- Music from the Desire plays on the car stereo
- Navigation instructions pause music playback (in car mode)
- Traffic information broadcasts on the radio mute music playback (but do not pause it)
- Phone calls mute and pause music playback
The Parrot still has a lot better audio quality than the HTC car dock, so it has some added value. But I haven't found a way to play music or navigation instructions on the car stereo without usig a cable.
martijn_bakker said:
Unfortunately, it doesn't. The parrot just handles audio related to phone calls. It doesn't work for navigation instructions, music and other sounds. (EDIT: Read your other post.. I've only tried navigation with Google maps so far, so I wouldn't know about any other navigation apps)
Whenever I use my Desire in the car, I hook up a cable between the headphones jack and the car stereo. This results in:
- Music from the Desire plays on the car stereo
- Navigation instructions pause music playback (in car mode)
- Traffic information broadcasts on the radio mute music playback (but do not pause it)
- Phone calls mute and pause music playback
The Parrot still has a lot better audio quality than the HTC car dock, so it has some added value. But I haven't found a way to play music or navigation instructions on the car stereo without usig a cable.
Click to expand...
Click to collapse
I had the same experience, however have found a workaround. I have added a plugin xCarLink iPod CD changer adaptor with an optional bluetooth module.
This allows me to connect my Desire using it for both handsfree and also A2DP bluetooth music playing. This does then pause my music or podcast if I receive a call.
I also have Copilot - this is flakey as to how it uses the bluetooth module - sometimes it works, sometimes it doesn't.
Hope this helps...
hmm shame.. I'm guessing then that the only way to get sat nav through is to buy an A2DP enabled bluetooth car kit. Shame as i've got a CK3100 just sitting here which i've had for a while but never installed. The problem is if i buy another car kit, plus a charger/holder, its going to cost a small fortune.
Thanks for the info.
I have an external mic (called an iRig Mic) that connects to a phone with a headset-jack.
On an iPhone it can be used to record audio when shooting videos, but when i connect it to my Nexus S running android, the sound from the mic is not recorded. Instead the audio from the internal mic i used.
Is there any way to change the audio source when recording videos? This would be a great feature for journalists using their phone as a camcorder for interviews.
Recording audio via 3.5 jack on android using external microphone
You have to buy adapter which will split the signal for microphone in and audio out (you probably know 3.5 jack in your phone is 2 directional as it supports headset with mic)
You can try to look for it on Amazon (headset buddy)
or solder into headset in the pins which are responsible for mic signal.
Then,
I know only 1 app for android which supports recording from external microphone:
Arabela Audio Recorder - choose DEFAULT audio source and it should catch the signal from external mic connected through adapter via 3.5 jack.
I THINK it can catch the audio while recording video because it works in background ... so later you will be able to remove the audio from video recording and join it with the one you recorded using Arabela with some kind of video editor
regards
couple of questions,
for the external mic is it stereo or mono?
any other programs you know that can capture external mic input since this post?
thanks!
wariat777 said:
You have to buy adapter which will split the signal for microphone in and audio out (you probably know 3.5 jack in your phone is 2 directional as it supports headset with mic)
You can try to look for it on Amazon (headset buddy)
or solder into headset in the pins which are responsible for mic signal.
Then,
I know only 1 app for android which supports recording from external microphone:
Arabela Audio Recorder - choose DEFAULT audio source and it should catch the signal from external mic connected through adapter via 3.5 jack.
I THINK it can catch the audio while recording video because it works in background ... so later you will be able to remove the audio from video recording and join it with the one you recorded using Arabela with some kind of video editor
regards
Click to expand...
Click to collapse
I would like to listen to my music via bluetooth audio streaming througth my car kit (parrot mki 9000). I also like to use the stock player (it is so nice and i am bored of using poweramp).
Is there any way to force the option of equalizer selection (dolby, srs, beats audio or analog equalizer)?
i would also like to know how to do this as when using beats or srs via bluetooth i get terrible crackling noise
is there a fix for bluetooth crackling noise ?