I'm using MVC to enable me to use handsfree dialling with my car's bluetooth, however to make it work properly I need to have the "Play system sounds on remote hands-free device" checked. But then the music plays over the vehicles bluetooth and not through the audio out from the phone.
Is there a way to stop music on the bluetooth in this situation.
Thanks,
Greg
Related
I am surprised that only phone audio comes out of the BT headset. I'd like to listen to music through it, and especially use Voice COmmand through it. Is there any way to redirect all audio to a BT headset, not just the phone?
Hi
I would like to know if its possible to have my phone paired to both my car bluetooth system which uses the hands free profile and to a second device which uses a2dp. Can both these be in use at the same time?
Thanks
Huw
Hi as far as im aware the Desire doesnt have multipoint capabilities which enable it to connect to 2 devices at the same time if you want to be able to stream music and take calls while in the car a good device is a venturi mini which does it all take a look on their website www.myventuri.com
Regards
Dave
Thats a shame , my car has an integrated voice controlled satnav/bluetooth so was hoping it would pair with both but then chop the streaming music when a call came in.
Actually it does work.
I've just tried connecting to my Bluetooth speakers and my Bluetooth handsfree set simultaneously. Obviously I had to set the handsfree to "Phone Audio Only" and the speaks to "Media Audio Only", but once I done this I could play music wirelessly to my speakers, and when a call came in the music paused and the headset took over. Once the call had finished, the music restated.
Regards,
Dave
Can anyone tell me if its possible to NOT play music audio though my BT headset, while its connected? Id rather play music through the headphone/3.5mm jack.
Ive been using my tp2 for awhile, as my primary mp3 player, but now that I picked up a bluetooth headset (yes, just now) and leave it on in the car, the audio only goes through that.
Any way around that, or is this a matter of having my cake and eating it too?
Ive looked around a little on the BT options, but there isnt anything labeled "calls only" or "music audio only", etc.
I do have bluetooth music capabilities in the car and I have been using it as such. That is labeled "Stereo Audio". (Ive decided to switch to the 3.5mm jack and sync bt to the headset)
The headset is labeled "Hands-free"...and thats all I want it to be.
(Music player is TCPMP)
Summary:
Music audio through headphone jack
Calls through BT headset
...simultaneously
I've been trying to figure out the same thing. No luck.
What BT headset do you have and does it support A2DP?
Disabling A2DP on my Jawbone ICON seemed to do the trick.
Try this?
Start, settings, bluetooth. Click the gears, then advanced.
Scroll down to audio. Deslect "play system sounds on remote hands free device".
I like ALL sounds to come through the headset, if anything else, as to not bug others around me, but it's a personal choice.
I also have the Jawbone Icon, and, if you have A2DP running, everything comes through the headset...most of the time
The subject says it all. Can I route audio through Bluetooth A2DP and the phone's speaker simultaneously? I want to keep my phone connected to my car's audio system via Bluetooth voice and A2DP. But sometimes I want to switch to XM Radio or other sources. When I do that of course, I lose audio prompts from Google Navigation.
Is this possible?
jalanjkcarp said:
The subject says it all. Can I route audio through Bluetooth A2DP and the phone's speaker simultaneously? I want to keep my phone connected to my car's audio system via Bluetooth voice and A2DP. But sometimes I want to switch to XM Radio or other sources. When I do that of course, I lose audio prompts from Google Navigation.
Is this possible?
Click to expand...
Click to collapse
I'm looking for the same thing. I can get audio through Bluetooth and have notifications go to speaker at the same time, but I can't get other media to go to speaker at the same time.
I would also be satisfied with a widget that lets me toggle the A2DP status of the Bluetooth connection on and off. It would not be the end of the world if I needed to toggle the A2DP off when I switch to another radio source and toggle back on when I go back to Bluetooth as the source in the car.
Sent from my Samsung Galaxy Note 2 using Tapatalk.
A2DP + phone speaker simultaneously
jalanjkcarp said:
The subject says it all. Can I route audio through Bluetooth A2DP and the phone's speaker simultaneously? I want to keep my phone connected to my car's audio system via Bluetooth voice and A2DP. But sometimes I want to switch to XM Radio or other sources. When I do that of course, I lose audio prompts from Google Navigation.
Is this possible?
Click to expand...
Click to collapse
If you ask me I'd say it's possible.Whenever my phone is connected to my stereo through A2DP, the music is played through loudspeakers only by default. However, when there's an incoming call and my ringtone is being played I can hear it through loudspeakers AND the phone speaker, which creates a pretty cool surround effect. I'd really love to make my music player interact with all the speakers like this all the time. I took my chance installing various apps like SoundAbout to help me figure it out, all to no avail. Any ideas?
Is there a way to get all audio to be played through bluetooth when a bluetooth headset is connected?
Right now when I use a bluetooth headset and if I get a text or any sort of notification sound, the sound okays through the phone speakers and through the bluetooth headset.
If I'm not mistaken the bt headset still has to be a2dp.
The headset I use supports and. Audio from music and videos play only through the bluetooth headset but when I get notifications or the phone ringtone plays through both the phone speaker and the Bluetooth headset. Ive tried a few bluetooth headsets and they all do this... Is there a fix?