Hi,
I just bought one and its great.
i have some issues with the WIFI connection.
I would like it to ONLY use WIFI at home and not some 3g or GPRS cause it takes money and a already have a wifi connection, why not use it ?
1. Can someone tell me how or what program to use to set up in the phone to use ONLY WIFI connection ?
2. Is it possible to connect to WIFI whenever like say the weather app wants to update and then close the wifi for itself to save some battery ?'
Or do i have to keep the WIFI on, all day ?
Thanks for your help
Look for NoData from Modaco.
You can disable the providers internet access.
Wifi will still be available.
The programs will use any connection possible, so if Wifi is the only connection, they'll use that connection.
Wifi is also the preferred connection when both are accessable.
To close the wifi you'll have to do this manually I'm afraid.
in wifi settings you can change power save mode to minimize power consumption.
G-Profile can help you. Depending on the location or hour of day it can switch between 3g and wifi. It has a ton of options.
Check it out.
Related
Hi I want to know if it is possible to set the device to use the available WIFI network and if not available then to use the GPRS to connect to internet?
In the connection setting\Select Networks: The network management tab has two settings 1) Internet and 2) Private network
If I use 1= GPRS and 2= my home network, all the internet access is managed by the gprs even if I am already connected to the wifi network.
Is this by design or I have something not configured properly?
Any feed back is appreciated.
the ppc will default to wifi if it is available. if no wifi is detected it should fall back to the 3G/2.5G connection.
tytnguy said:
Hi I want to know if it is possible to set the device to use the available WIFI network and if not available then to use the GPRS to connect to internet?
Click to expand...
Click to collapse
Hi!
Off course it is possible to set the device to use the available WIFI. U do that by just setting WIFI on by commanager and go on. U need not GPRS to connection.
Search a little bit in this forum u gona find hundreds of explanation for your Q
Thanks samw52000 and Abo Forat for the replies.
I am able to achieve what i requested.
I was actually setting up the gprs setting first and then configuring the my work network as two separate entries.
Thanks
Is there an app that chooses your preferred Wifi connection when it's available, like at home, over your Data connection? I know the 3G iPhone has something like this and i'd like to have that happen on my HTC TyTn running CRCs 13.0 Windows 6.1.
Any suggestions?
Cheers
inbanco said:
Is there an app that chooses your preferred Wifi connection when it's available, like at home, over your Data connection? I know the 3G iPhone has something like this and i'd like to have that happen on my HTC TyTn running CRCs 13.0 Windows 6.1.
Any suggestions?
Cheers
Click to expand...
Click to collapse
SPB phone suite is one! That's why I use it!
which part of their package does what i want? i've had a look at their site
i don't want all that other stuff that they offer - just the automatic detection of my home WiFi and connection to it - disconnecting my Data connection
inbanco said:
which part of their package does what i want? i've had a look at their site
i don't want all that other stuff that they offer - just the automatic detection of my home WiFi and connection to it - disconnecting my Data connection
Click to expand...
Click to collapse
I did say 'spb phone suite'
Edit, not sure if it can be 'automated' you need to select a profile.
Mine works without having Phone suite installed.
When I'm at home I activate my Wifi - open activesync and sync my info. When done I simply close my wifi connection. When I'm on the road I just open activesync and it automatically opens my defauld data connection to sync via GSM / 3G. The process works simply enough.
DeonH said:
Mine works without having Phone suite installed.
When I'm at home I activate my Wifi - open activesync and sync my info. When done I simply close my wifi connection. When I'm on the road I just open activesync and it automatically opens my defauld data connection to sync via GSM / 3G. The process works simply enough.
Click to expand...
Click to collapse
I don't like the manual part of how WM uses available Data connections. It should be able to
1. Power on and Connect to a registered WiFi accesspoint when available
2. Connect via GRPS/UMTS/HSDPA... when no registered WiFi AP is present and power off WiFi to save battery power
Nokia phones with S60 (not FP2) operating system do support this function.
See also this thread : http://forum.xda-developers.com/showthread.php?t=422604
stealth1 said:
I don't like the manual part of how WM uses available Data connections. It should be able to
1. Power on and Connect to a registered WiFi accesspoint when available
2. Connect via GRPS/UMTS/HSDPA... when no registered WiFi AP is present and power off WiFi to save battery power
Nokia phones with S60 (not FP2) operating system do support this function.
See also this thread : http://forum.xda-developers.com/showthread.php?t=422604
Click to expand...
Click to collapse
I have mine set to turn off the wifi if no network is connected in two minutes (wireless network, power settings). Sounds like you want something that will automatically turn on wifi every time you activate your device, instead of manually choosing to turn on wifi.
Before I had the wifi set to turn off, I found that was a pain in the proverbial, as it kept telling me about networks it found that I wasn't interested in connecting to!
i'm trying to connect to my home network. It see's it and connects to it... but then straight after it connects to it it totally disconnects and the wifi is turned off... what could be the probelm?
Did the problem persist after soft-reset? If yes, did u install any profiles manager (like phoneAlarm etc. which u can switch wifi on specific time) or did u changed any wifi settings using advanced config/hdtweak/similar apps?
I have an issue with wifi where when i use my works wifi it connects and then should i check IP it clearly shows the works network, however...
when at home and connect to my home wifi it still says connected however when i check my network IP the browser is clearly using the t-mobile 3G internet.
It's baffling to say the least. I've tried closing browser, changing order i open connections etc but to no avail.
Any thoughts?
is there some settings or a reg tweak i can do to insure my Excaliber only goes to the internet via wifi?
If you go into your connection settings you can change connects to: internet to work and it will stop connection, been a long time since not had a descent data plan but pretty sure that's spot on
Ive searched the web and read about countless issues about lollipop wifi. but im looking for something specific which i cannot find elsewhere:
on KitKat when connecting to a hotspot (or any wifi for that matter) it would instantly connect to wifi and switch to that connection, regardless if the connection gave internet access or not.
on LP it seems to remain connected to mobile data and wifi does not give an IP address until a hotspot is logged in (using the sign in to wifi notification)
the problem is it doesnt always show, is there a way to switch the wifi policy to not perform a soft handover? or does this need to be baked into a rom?
I have an app that auto-logs into wifi hotspots for me, but because it does not get an IP address and apps are not able to use that connection, it does not work as intended.
FYI i am NOT talking about wifi to mobile data handover, its the other way around