Related
Hi,
Well after 2 phones and countless upgrades, I finally bricked my hermes! I have read countless threads and the WIKI but I don't see my problem anywhere. When I soft reset my phone, it sticks at the Logo Screen(AT&T in my case). If I try to go to bootloader, it will go to boot loader screan(tri-color) for about 2-3 seconds then it goes to the loading screen that you see when you are upgrading. I have 1.01 bootloader.
I have cid unlocked and upgrading many times, but at last, I am totally stumped. Can someone point me in the right direction! Thanks
try to upgrade a complete rom from a microsd card. You can try one with SPL 1.01 if possible from your original carier. You know waht to do: you rename the nbh file to HERMIMG.nbh and put it in a empty card. with the card in the slot produce the tri-color mode.
tomcat777 said:
Hi,
Well after 2 phones and countless upgrades, I finally bricked my hermes! I have read countless threads and the WIKI but I don't see my problem anywhere. ...
Click to expand...
Click to collapse
It's a shame that you did not do the reading of countless threads and the WIKI BEFORE updating your phone, why didn't you have HARDSPL 2.10 on there?
Check the thread in my sig or/and look on the WIKI for the table that Pof kindly put together it should point you to the answer you need. It's not Black 3.01 fault so I wouldn't have mentioned it in the heading as it will insult those people responsible for Black 3.01.
Thanks everyone, I believe I am back on the right track....it seems that my microSD card was causing my phone to kick out of bootloader mode. Not sure why but I took the card out and I am now flashing back.
Thanks for all the help!!! Knowledge is power!
What if Everything goes ok But no power?
dcoelho said:
try to upgrade a complete rom from a microsd card. You can try one with SPL 1.01 if possible from your original carier. You know waht to do: you rename the nbh file to HERMIMG.nbh and put it in a empty card. with the card in the slot produce the tri-color mode.
Click to expand...
Click to collapse
I got one Hermes100. I tried upgrade via Microsd, Upgrade 100% cOMPLETE, but after it the phoe become complete dead. No Boot Loader using Boot Sequence. Nothing not even red light when USB inserted. Any Possinility to Bring it in Boot Loader mode?
Thank U.
Press (at the same time) the Power Button, The OK Button on the left side and the reset button with the pen. Should go into Bootloader.
When you flash, you have to tell it what bootloader you are using as it won't autodetect.
Nothing goes right!!!!!
Percz said:
Press (at the same time) the Power Button, The OK Button on the left side and the reset button with the pen. Should go into Bootloader.
When you flash, you have to tell it what bootloader you are using as it won't autodetect.
Click to expand...
Click to collapse
Dont know what goes wrong, But here is the story, The phone was Perfect but in Japanes Langauge. O2 Trion, with DOCOMO rom in it. It was flashed for Langauge change and Update to WM2006, used DEV_HERMES_WWE_WM6 rom. Using olipro boot loader via filemanager and using sd card for flashing. It flashed 100% and after reset nothing.... No Boot Mode, No KITL, No Light when USB / Charger insert. But without battery the signal light blink RED. thats the story. Cant get any report via mtty cause I cant bring it in to boot mode.
Any help would be appriciable.
Why do you people not read the upgrade guides before you flash your $600 phones? the first thing you HAVE TO DO is load SPLV7 on your phones with out it its like going to a whore house and expecting to not come out without some STD its just not going to happen....
lol austin
austinsnyc said:
Why do you people not read the upgrade guides before you flash your $600 phones? the first thing you HAVE TO DO is load SPLV7 on your phones with out it its like going to a whore house and expecting to not come out without some STD its just not going to happen....
Click to expand...
Click to collapse
Thanks austin I deserve that kinda comment.... But it wont help me now I think, so I have to go to whore haouse and have some std now!!!!!!!!! SPLV7!!! if i have time maching then I will return to the date and have that on my herma!!!
Any way more comments please
austinsnyc said:
Why do you people not read the upgrade guides before you flash your $600 phones? the first thing you HAVE TO DO is load SPLV7 on your phones with out it its like going to a whore house and expecting to not come out without some STD its just not going to happen....
Click to expand...
Click to collapse
So poetically put, i like it!
How do u like that poetry when the subject is U? Very very painful must be. Cause its still hurting me with my 600$ hermes!!! Ha ha ha ha ha ha
I have a HTC touch with Bell. I flashed NFSFAN's WM6.5 onto it. I didn't use a cab, mostly because I couldn't figure out which one or how to....
When I power on my phone I get to the today screen and I can't do a thing. It shows the correct time, and flashed the green light... I can see the options, and if I press on the screen the phone vibrates.
What did I miss? Oh ya, and how do I turn off the vibrate on screen press when I do get this working?
Thanks!!
On subsequent restarts I find that I am sometimes unable to even get to the today screen and connecting to the PC is impossible.
Hope that helps explain it.
The question is, what did you flash it WITH!?
NFSFAN's 6.5 21198 V3 GENERIC CARRIER ROM
x01001010x said:
NFSFAN's 6.5 21198 V3 GENERIC CARRIER ROM
Click to expand...
Click to collapse
did you update the radio first?
did you hard reset after you flashed?
did you flash this ROM via activesync or bootloader mode?
Detroit Doug
Yes I think I did update the Radio. I used the current bell version from HTC. (Radio Version 3.42.50)
Yes I have hard reset the phone. I noticed that it froze once after a hard reset and had replaced the start with customization. I left it for 10 minutes but nothing had changed so I reset it.
I entered bootloader on my phone, plugged in the usb cable then ran the loader on the pc and waited for that to complete.
x01001010x said:
Yes I think I did update the Radio. I used the current bell version from HTC. (Radio Version 3.42.50)
Yes I have hard reset the phone. I noticed that it froze once after a hard reset and had replaced the start with customization. I left it for 10 minutes but nothing had changed so I reset it.
I entered bootloader on my phone, plugged in the usb cable then ran the loader on the pc and waited for that to complete.
Click to expand...
Click to collapse
OK, there is an issue with the flash from what it sounds and bootloader is done from the SD card NOT from a USB cable, try this...
- Using the original SD Card that came with the phone (or any SD card under 2GB in size) Format your SD card making sure it FAT32
- Copy the RUU_signed.nbh file over to the that card and rename it VOGUIMG.nbh
- Then flash via bootloader power+camera+stylus, it will pull the image to flash from your SD card automatically
- wait and then hard reset (red+green+stylus) after customizations/autotun occurs
then try using the phone, hopefully that will take care of the issue
Detroit Doug
Detroit_Doug said:
OK, there is an issue with the flash from what it sounds and bootloader is done from the SD card NOT from a USB cable, try this...
- Using the original SD Card that came with the phone (or any SD card under 2GB in size) Format your SD card making sure it FAT32
- Copy the RUU_signed.nbh file over to the that card and rename it VOGUIMG.nbh
- Then flash via bootloader power+camera+stylus, it will pull the image to flash from your SD card automatically
- wait and then hard reset (red+green+stylus) after customizations/autotun occurs
then try using the phone, hopefully that will take care of the issue
Detroit Doug
Click to expand...
Click to collapse
Shouldn't be an issue flashing from bootloader mode via PC cable. Bootloader allows the computer to reckonize your phone as a usb device.
The 6.5. ROM is still a custom ROM, so the question is have you unlocked your phone?
If not unlock using imcokeman's 2.31 unlocker first, then follow dd's instructions.
jmitr said:
Shouldn't be an issue flashing from bootloader mode via PC cable. Bootloader allows the computer to reckonize your phone as a usb device.
The 6.5. ROM is still a custom ROM, so the question is have you unlocked your phone?
If not unlock using imcokeman's 2.31 unlocker first, then follow dd's instructions.
Click to expand...
Click to collapse
Yeah the "I think " part got to me as well until I remember responding to a different thread of his helping him along in getting started to flash and in that one he had unlocked as was on his 3rd ROM by the end of it LOL so I believe he has successfully unlocked his phone, just the issue may be corruption in the flash of the 6.5 WinMO ROM
Detroit Doug
Ok. I will have to find my smaller card. All I have here is a 4GB one.
Thanks jmitr and Detroit Doug! I will try moving the file to the card. It will take me a few days to get my smaller card as I left it at the office.
Any luck yet? let us know how it worked out for you...
Detroit Doug
I will. I turned my office upsidedown looking for that little card... and it was at home by my laptop the whole time.
I have it now, and actually just came online to get the file names I need. I will keep you updated.
Well... that was a little different. I didn't get the customization the first run after the flash. I did however get it immediately after the hard reset.
So far (and about 10 min.) everything is looking good!
I will play with it for a while and let you know.
Thanks for the help!!
x01001010x said:
Well... that was a little different. I didn't get the customization the first run after the flash. I did however get it immediately after the hard reset.
So far (and about 10 min.) everything is looking good!
I will play with it for a while and let you know.
Thanks for the help!!
Click to expand...
Click to collapse
No problem and welcome to the wonderful world of hard drug.... ummm I mean flashing, yeah flashing thats it
now that your hooked you can forget about sleep, family, a life, anything else
MUH HA HA HA HA ha hahhahahahahahahahahhaha
Detroit Doug
Oh ya! That looks like it did the trick.
It has been running since my last post without locking up... the internet works... and it is slick!
Thanks for your help Detroit_Doug and jmitr! I appreciate it.
Hi i was wondering if anyone can help me?
I was trying to flash my desire (which is rooted) back to stock rom when my pc crashed, now my desire wont turn back on.
I have tried to put it into recovery with power button and volume down but all it does is vibrate once and thats it.
If i plug in the charger and take the battery out the led flashes orange and green, but when i put the battery back in it goes to a solid green which i persume means its fully charged, then when i try to go into recovery again the led goes out and i am back to where i started e.g a dead Desire
Can i make a Goldcard to fix this problem on my pc without using my phone or is that out of the question?
The phone is out of warranty
Please help if possible
Regards mimic
Can you go to fastboot? Back button and Power?
Yes i have tried that but still nothing
Moscow Desire said:
Can you go to fastboot? Back button and Power?
Click to expand...
Click to collapse
volume down and power ?
He already did that....
Moscow Desire said:
He already did that....
Click to expand...
Click to collapse
oh yeah .... teach me to skim read
Based on what you have said, your recovery and backup is TU. Without a recovery menu, I suspect, not a lot of folks can help you.
I suppose that if you connect USB to the PC, it gives you Device not found?
If so..... I would say installing the Android Development Kit/Package,
See if it recognizes and you can use it to do things.
If not..... you're Fubarred...
how do i use the android package?
Yes i tried plugging it into the pc and it doesnt find the phone
Do you think there will be anywhere were i will be able to get it fixed and at what cost?
If the cost is too much i will just bin the phone and save up for another
wilbur-force said:
oh yeah .... teach me to skim read
Click to expand...
Click to collapse
I do it quite frequently.....
ok i plugged it back into the pc and looked in device manager and android usb devices has come up which is showing my HTC
any ideas?
I really appreciate all the help thankyou
Holy sheepskin, you have a USB connection.
Sorry for the batman cliche.....
If you have a usb connection, I would say to flash an RUU back to stock.
Usually this means, you have to have HTC sync instaled...
Bump to smbdy who can direct this person to a stock RUU file...Too many beers.... running on auto-pilot now
I tried running this stock rom which is the 3 network...RUU_Bravo_H3G_UK_1.20.771.3_Radio_32.36.00.28U_4.06.00.02_2_release_124822
But it says phone not found???
Below is a screenshot of device manager
Not a problem, no thanks necessary, unless we fix the issue.
Ok, so, we have determined, that your PC, can see the phone, at least through device manager.
Next, can you view the contents of the SD card through Windows Explorer?
If so, make sure HTC is installed correctly., just a precaution, look for any warnings in device manager.
I assume, you have not rooted or installed a custom ROM?
If not, with HTC running, you should be able to double click the ROM...XXXXXXXX.exe, and it should connect with the phone, and install... Unless you have the incorrect ROM.
CRAP, you have a Desire, so you should make a "Gold Card" from your SD.
i cannot see the memory card in windows explorer,
my neighbour says he did root the phone and it had a custom rom on it called djdroid or something like that.
I started HTC Sync and it says no device connected
every time i try and install the rom it starts going through the process lioke erasing data and updating signature then it stops and says ERROR [131]: CUSTOMER ID ERROR??
I have tried the WWE rom and the H3G rom but they both come back with an error
Have i got the right rom?? If not could you please tell me which one to get
ps.. how can i make a gold card if i cant boot my phone and will this be able to get my phone up and running?
mimicuk said:
i cannot see the memory card in windows explorer,
my neighbour says he did root the phone and it had a custom rom on it called djdroid or something like that.
I started HTC Sync and it says no device connected
Click to expand...
Click to collapse
Your neighbor????
(witholding comment)
Dude, somehow, I think he dumped his problems on you.
Well, on XDA, we have the brightest and most experienced. And there are some pretty obstinant people, who refuse to throw the towell in.
And believe me, we will all put our 2 cents in on this one to get you up and running.
So, a challenge to all that would care to enter......
And believe me, I haven't seen the "big guns" yet. You just have to shake them outta their shell....
I really hope someone can help me figure this out as i really dont want to throw the phone away
By the way i think i have come to the right place to get the best help
Do you have a GOLD Card????
I mean your SD.
Looks like a typical gold card error when flashing.
for a gold card, look here..
http://theunlockr.com/2010/06/07/how-to-root-the-htc-desire/
yes i have an SD card which is in my HTC
But i have no idea what a goldcard is?? lol
Ok im stuck, gave this phone to my girlfriend when I got my new phone, anyway it started having random reboots and was getting stuck on the splash screen, it was getting more regular so I told her I would put a new rom on, anyway I tried installing the stock 2.2 froyo with root busybox ect, and I got stuck in a boot loop, so I tried doing a full wipe again and by accident after that I let it boot up, which I though it wouldn't but anyway it did, I just got on to the home screen and it rebooted again and was stuck on the splash screen, but now I cant access recovery, I can however get in to the hboot menu, and when selecting the recovery my phone vibrate and sticks at the spalsh screen, and goes no further.
In the past I have changed the splash screen to a photo but was about 5 month ago, dont know if this has somthing to do with the splash screen loop????
To be honest I have lost most knowledge of the desire as I have an LGo2X now, have I just forgetten somthing?????
ANY HELP APPRECIATED
but my phone is pretty much bricked up at the min as I cant do anything with it
I also have S-OFF
Well, the sure-fire way to solve this is to run a RUU and then unrevoked again. Someone else might know of a better way though.
Kickasskev said:
Ok im stuck, gave this phone to my girlfriend when I got my new phone, anyway it started having random reboots and was getting stuck on the splash screen, it was getting more regular so I told her I would put a new rom on, anyway I tried installing the stock 2.2 froyo with root busybox ect, and I got stuck in a boot loop, so I tried doing a full wipe again and by accident after that I let it boot up, which I though it wouldn't but anyway it did, I just got on to the home screen and it rebooted again and was stuck on the splash screen, but now I cant access recovery, I can however get in to the hboot menu, and when selecting the recovery my phone vibrate and sticks at the spalsh screen, and goes no further.
In the past I have changed the splash screen to a photo but was about 5 month ago, dont know if this has somthing to do with the splash screen loop????
To be honest I have lost most knowledge of the desire as I have an LGo2X now, have I just forgetten somthing?????
ANY HELP APPRECIATED
but my phone is pretty much bricked up at the min as I cant do anything with it
I also have S-OFF
Click to expand...
Click to collapse
I guess you can still access fastboot? If yes, flash new recovery with it. No need to get back to stock rom and then run unrevoked again, imho.
MatDrOiD said:
I guess you can still access fastboot? If yes, flash new recovery with it. No need to get back to stock rom and then run unrevoked again, imho.
Click to expand...
Click to collapse
How do I flash a new recovery? throught fast boot??
Kickasskev said:
How do I flash a new recovery? throught fast boot??
Click to expand...
Click to collapse
First be sure you have fastboot USB driver (search XDA if you don't).
Then get the .img file for the recovery of your choice (usually either CWMR or AmonRA)
Then get your phone to fastboot mode, it should change to fastboot USB
Finally, from your PC type the following:
fastboot flash recovery imagefilename.img
where imagefilename.img is the name of the imagefile you selected.
note: it is easiest to have the .img file in the same folder as fastbook.
good luck
beartiger said:
First be sure you have fastboot USB driver (search XDA if you don't).
Then get the .img file for the recovery of your choice (usually either CWMR or AmonRA)
Then get your phone to fastboot mode, it should change to fastboot USB
Finally, from your PC type the following:
fastboot flash recovery imagefilename.img
where imagefilename.img is the name of the imagefile you selected.
note: it is easiest to have the .img file in the same folder as fastbook.
good luck
Click to expand...
Click to collapse
Ok first off when I do abd devices it does not show any devices all it says is
LIST OF DEVICES ATTACHED
and thats it, anyway I tried flashing the recovery img it said it was sucessful but when I rebooted and tried to load the recovery it was stuck at the splash screen along with 7 vibrates.
Also I have had the phone on charge all night, I tried to do an ruu throught windows installer but that stoppped me and said the battery is less than 30% so cannot continue, even thought I know the battery is full.
Ok now I have a HUGGGGGEEEE problem hehehe ok I finally got the RUU to run, and it got to about 80% and said error 110 FILE OPEN ERROR, I exited the program and shut down the phone then tried to restart it and NOTHING, NOTHING AT ALL wont turn on not even a power light when charging.
Is it BRICKED???
And will I get away with taking it back to the shop as it's still under warranty????
from what I seen it was the Radio V2 that failed the update everthing else said it was OK
Create a goldcard.
http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/
If your ADB is not working... Put the SD card of your Desire into your LG mobile.....Goto market and search for app called "goldcard helper"... it will give you the reverse CID and you can follow from step 7 from above guide.
After creating a goldcard from your LG mobile... put tht sd card back to your desire and flash below RUU
http://shipped-roms.com/download.ph...9.00.32U_5.11.05.27_release_151783_signed.exe
Check Md5 Hash
14d740a8ec68bd8cc830ff7c0905df72
How will this work , the desire won't turn on, doesn't do anything when pluged in to the computer and does not even light up when charging through the mains
Sent from my LG-P990 using XDA App
Try it will work.. as it seems you have slcd brick....
What you do is.. after creating and inserting goldcard in your desire...
Turn it on by pressing.... Voume Down and power.. and than connect usb cable and Flash
Please make sure something.. your sd card should be 1 single fat32 partition..
To flash ruu your must have installed android usb driver..
If not than you need to do this with PB99IMG.zip way.. let me knw I will guide you
jhonybravo4u said:
Try it will work.. as it seems you have slcd brick....
What you do is.. after creating and inserting goldcard in your desire...
Turn it on by pressing.... Voume Down and power.. and than connect usb cable and Flash
Please make sure something.. your sd card should be 1 single fat32 partition..
To flash ruu your must have installed android usb driver..
If not than you need to do this with PB99IMG.zip way.. let me knw I will guide you
Click to expand...
Click to collapse
Thanks for your help, i have a gold card at home, but I'm at work at the and won't be home till tonight will try asoon as i get in thanks, will keep updated
But you say turn it with power and vol down, i tried that earlier and didn't work, will it with the gold card in it?
Sent from my LG-P990 using XDA App
Yes.. coz in slcd brick.. you wont be able to see anything.. I hope your USB is working.. so when you will go home.. you put the goldcard in your phone...
Turn it on by Volum Down and power..
And connect USB cable and connect to computer and run the RUU
jhonybravo4u said:
Yes.. coz in slcd brick.. you wont be able to see anything.. I hope your USB is working.. so when you will go home.. you put the goldcard in your phone...
Turn it on by Volum Down and power..
And connect USB cable and connect to computer and run the RUU
Click to expand...
Click to collapse
Thanks a lot will try when i get home, i will keep you updated
Sent from my LG-P990 using XDA App
ok put the gold card in turned it on with power and vol button plugged it in to the usb and nothing happened, no screen image no beep or vibration, not recognised by the computer
Can anyone confirm what I have just read
''usually when this happens you get no charge light, no charge light is an indication of complete brick/hardware/hboot problem''
My worst nightmare, I dont get a charge light or nothing to be quite honest
After connecting to computer ..did you run the RUU
Hmm.. that's serious .... are you trying wall charger.. try charging with another usb cable.. and another charger...if its not charging than...... I am afraid but thats the actual Brick
jhonybravo4u said:
Hmm.. that's serious .... are you trying wall charger.. try charging with another usb cable.. and another charger...if its not charger than I am afraid thats the actual Brick
Click to expand...
Click to collapse
yah tried two different chargers and two different usb cables
1 more thing if you can check is.. check with another battery if possible
I havn't got another battery, but I will do a test with the multimeter
Okay, my touch pro 2 is messed up beyond belief. I tried to install a custom rom and I did it all by the instructions. Then it turned off when it was restarting and afterwards once it was restarting it just stayed on the HTC screen. It will not go any further. I have hard reset the thing many times along with trying to reinstall the roms. I honestly hope there is something that I can do... I have also tried doing the SD flash. Either way please comment ASAP.
Bootloader Info
RHOD400 32M SS-BC
SPL-1.00.OliNex
MicroP(LED) 0x0A
MicroP(KEY) 0x04
Turbro HW/Turbo SW
TP MFG DATA
496,521 764,841
763,207 245,198
227,841 Calibrated
This is what is shown in bootloader
the rhod400 is a cdma device, go to the tp2 cdma development and flash a rom from there
this is only for GSM devices
Is that why it would be stuck in the HTC Screen everytime?
pablotheescobar said:
Is that why it would be stuck in the HTC Screen everytime?
Click to expand...
Click to collapse
yeah, you installed a GSM rom, which is not compatible with your device
here is the link to the CDMA forum, good luck
http://forum.xda-developers.com/forumdisplay.php?f=517
Well, the thing is that I have tried to flash ROMS on there before and it still goes to the same screen. I don't know what I need to do because every forum is just saying try flashing it and I already have tried that and it goes to the same screen every time.
pablotheescobar said:
Well, the thing is that I have tried to flash ROMS on there before and it still goes to the same screen. I don't know what I need to do because every forum is just saying try flashing it and I already have tried that and it goes to the same screen every time.
Click to expand...
Click to collapse
did you run the "task 29" tool before flashing?
No, I never did do that... In the tutorial it never had that. I had to unlocked it with the hardSPL and I did that and it just restarted fine and then once I did that I installed the other one and it did the custom Rom and this is the outcome of that...
pablotheescobar said:
No, I never did do that... In the tutorial it never had that. I had to unlocked it with the hardSPL and I did that and it just restarted fine and then once I did that I installed the other one and it did the custom Rom and this is the outcome of that...
Click to expand...
Click to collapse
just do that before every flash and you'll be fine
Yeah, but my phone won't load anymore. It turns on and stays at the white HTC screen.
ok what task 29 does is deleting everything on the internal storage, read the cdma faq, so dont expect it to boot, click the button sequence that gets you in the boot loader, connect to usb, run the update utility, and profit. can't be anymore simple
good luck
NEVERMIND!
I installed the LEAD ROM, and it went through the ROM process and it came to the HTC screen and then it started loading I was so happy! Thanks for your guys help!
pablotheescobar said:
I installed the LEAD ROM, and it went through the ROM process and it came to the HTC screen and then it started loading I was so happy! Thanks for your guys help!
Click to expand...
Click to collapse
ur welcome, don't forget the thx button
pablotheescobar said:
Yeah, but my phone won't load anymore. It turns on and stays at the white HTC screen.
Click to expand...
Click to collapse
have you formatted your micro sd card to fat32?
then flash the rom from the sd card.
bro heres what you gotta do to fix your pfoblem, first format your sd card to fat32 then copy the nbh file onto the card, rename it to RHODIMG insert the sd card then enter the boot loader menu by first taking out the battery, and reinserting it. now with the phone off hold the volume down button while pressing the power button this forces the device into bootloader mode. your screen WILL read RHODIMG os. now press the power button again to install whatever rom you want but I would recommend using a stock rom or one that you know works, ie- from past experience.
trust me bro do this and all will be fine again,
HAPPY FLASHING
oh dont forget to press the soft reset button once the rom installation is done when the screen says installation successful,
once again HAPPY Flashing>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>
next thing is to try a different cable.
try this and if it doesnt work pm me and I will walk you through some more complicated steps. I have an epic now so I am not on this page much anymore. but I am very familiar with the rhodium. and like to come by every once in a while to see if anyone needs any help!
sapperpipo said:
have you formatted your micro sd card to fat32?
then flash the rom from the sd card.
bro heres what you gotta do to fix your pfoblem, first format your sd card to fat32 then copy the nbh file onto the card, rename it to RHODIMG insert the sd card then enter the boot loader menu by first taking out the battery, and reinserting it. now with the phone off hold the volume down button while pressing the power button this forces the device into bootloader mode. your screen WILL read RHODIMG os. now press the power button again to install whatever rom you want but I would recommend using a stock rom or one that you know works, ie- from past experience.
trust me bro do this and all will be fine again,
HAPPY FLASHING
oh dont forget to press the soft reset button once the rom installation is done when the screen says installation successful,
once again HAPPY Flashing>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>
next thing is to try a different cable.
try this and if it doesnt work pm me and I will walk you through some more complicated steps. I have an epic now so I am not on this page much anymore. but I am very familiar with the rhodium. and like to come by every once in a while to see if anyone needs any help!
Click to expand...
Click to collapse
look above it says problem solved, and that ungrateful n00b did not even hit the thanks button, don't waste your breath
Yeah your right.
Sent from my SPH-D700 using XDA App
Hey, I am going through the same thing too. I hope that someone can really help. I am a beginner when it comes to this.
pablotheescobar said:
Okay, my touch pro 2 is messed up beyond belief. I tried to install a custom rom and I did it all by the instructions. Then it turned off when it was restarting and afterwards once it was restarting it just stayed on the HTC screen. It will not go any further. I have hard reset the thing many times along with trying to reinstall the roms. I honestly hope there is something that I can do... I have also tried doing the SD flash. Either way please comment ASAP.
Click to expand...
Click to collapse