Hi,
I'm looking for a simple utility to connect or disconnect from internet, could be just one button or somethig like that.
The thing is, because WM establish internet connections in a automatic way, sometimes a program (asp) that requires internet its not able to establish the connection.
Thanks
Related
Hi guys, I recently destroyed my XDA2 and got a 2s on the insurance
Bluetooth on WM2003 SE if fair poor, but I managed to upgrade the stack thinger to 3900..... so I'm not completely XDA illiterate.
However, the wifi baffles me! I have access to an unsecured wireless network with internet access, and my 2s will connect to it. When I go on the the internet on my XDA, even with wifi connected it still tries to connect GPRS to use the internet. If I keep clicking cancel, it will load the page (presumably through the wireless network's internet access).
It has become clear that I have no idea what I'm doing with regards to networking. Could someone post a quick guide as to how to set up the wifi (from scratch) so that when it finds an unsecured network it will automatically use it for the internet.
Sorry if there's already a thread on this but I really can't find it. Cheers guys
-Mike
just what i need as well, i have just bought a wifi router so i can use the internet on my xda2s.
using the wireless manger -> wireless LAN manager i get:
STATUS: connected to network
SSID: NETGEAR
TX RATE: AUTO
MODE:INFRASTRUCTURE
CHANNEL 11
BSSID: 00-09-5B-D7-DC-2A
MAC: 00-09-2D-0B-C0-A6
but even when i pull the Ethnet cable (forgot how its spelt) out of the back of the router it still stays connected. so im thinking its more my PC than the xda. the thing is the router came with no software so i have no idea if its connected properly. when i pull this Ethnet cable out of the wifi router o get network cable unplugged. The network card is Broadcom 440x 10/100 Integrated Controller. Which I have never used.
if anyone has a any ideas it would stop me pulling my hair out.
Sorry to hijack this thread
mike freegan said:
However, the wifi baffles me! I have access to an unsecured wireless network with internet access, and my 2s will connect to it. When I go on the the internet on my XDA, even with wifi connected it still tries to connect GPRS to use the internet. If I keep clicking cancel, it will load the page (presumably through the wireless network's internet access).
-Mike
Click to expand...
Click to collapse
Mike, I dont think the wifi first and GPRS next works. It doesnt work properly on mine either. If I try a internet access via gprs and a local wifi is readily available, the system does not automatically switch to local wifi.....I think this could be a microsoft issue than a xda issue.
robboy said:
but even when i pull the Ethnet cable (forgot how its spelt) out of the back of the router it still stays connected. so im thinking its more my PC than the xda. the thing is the router came with no software so i have no idea if its connected properly. when i pull this Ethnet cable out of the wifi router o get network cable unplugged. The network card is Broadcom 440x 10/100 Integrated Controller. Which I have never used.
Click to expand...
Click to collapse
when u pull out the ethernet cable from the back of the router, can you still surf the net from you xda or PC?? that seems odd. So either you are not connecting to "your" own router, or someone else has a same router with unsecured setup and you were locked onto their service....if you follow what I mean. what happens if you kill the power to your router? you should definitely notice that the wifi service disappear in your xda and PC.
Dont expect a router to disappear by simply unplugging the ethernet cable, if the router is powered up, it will show up on your xda and the PC although obviously there will be no internet access.....
sorry if i wasn't clear. i meant i was still receiving a signal from the wifi router. i could never use the internet on the pda
update:
i can browse my pc files wirelessly using resco explorer, using the standard file explorer i can view the pc files using \\network/c and i have finally been able to connect to activesync.
however i still can not connect to the internet.
Any ideas, from looking on this forum it seems lots of peeps are having problems with this but nobody seems to have the answer
XDA Wi-Fi Solution....It Works!!!!
Hi,
I'm new to the forum and new to XDA2i (presumably XDA2s is same!) ....
I too had many frustrations connecting the wi-fi...but now I've cracked it, here's how.......
On first very first use (or following a hard re-set) device users are prompted to choose “What do you want WLAN to connect to?” The option bullets are ‘Internet’ or ‘Work’….’Work’ should be selected, this will connect them to the nearest WLAN (if this network is WEP encrypted it should be switched to ‘Open’ rather than ‘shared’ as is often the case).
Next prompt asks for any WEP Encryption ‘Pass Key’ to be input, when doing so omit any ‘-‘ between character pairs. Normal start-up should then be completed. Once device is up and running…..
From ‘Start’ pull-down on the ‘Today Screen’ select…. ‘settings’>’connections tab’>’connections icon’>’advanced tab’>’Select Networks’> pull-down ‘My Work Network’ > ‘OK’ out of selections to save and exit.
Go to ‘Wireless Manager’ in programs, select WLAN icon from main screen (which should turn green to show active), then select mini ‘WLAN’ icon from lower toolbar to see the status of the connection, quality of signal etc.
That did it for me......
Cheers
windupmerchant
Hi, is it possible to connect the BA, via WIFI (P2P connection), to a PC with a WIFI card and use the PC's internet connection tu surf the web?
I tried: I can make the BA get the signal, but when I try to connect to a website it doesn't work.
Thank you in advance.
Bye.
fabbor75
I don't think its possible to do this directly using a P2P WIFI connection, but if you can get activesync to work over a P2P WIFI connection, it might work. I know is I use activesync over a USB connection & I can surf the net all day, so I'm thinking it might be possible to use the same approach over wifi.
Thing is I don't know if its possible to use activsync over P2P wifi
Solution
The problem is that windows not chain the IP Adrress of PC and Pocket bacause Nat not work under Xp basic system.
It's possible however to install a third party software to route packet from Pc to pocket i think all NAT's program can do that!!!!
Find one and Good Luck.
With WM2003SE i've used WINROUTE
Maybe?
Hi fabbor75!
Maybe your problem isn't the connection to the PC, it's maybe the DNS-resolution. Check your TCP/IP-settings on your BA, the important thing ar the DNS-Server.
The badest thing you must do is that you have to configure all TCP/IP setting manually: IP-Address, Subnetmask, Gateway and DNS-Server.
But you have to configure EXTERNAL DNS-Server on your BA, this one you got from your internet-provider, not the PC to which your BA is connected P2P. And the Gateway is the IP-Adress of your WiFi-card which is built-in in your PC.
Maybe this helps you.
Greetings, Peter
I have no problem to connect to the internet (to update weather, news etc) when I connect my P3300 to my desktop (which connect to the internet through a hardwire modem and a hardwire router). When I connect the P3300 to my laptop (the laptop is connect to internet through the WIFI rounter), I then cannot update those weather or news in my P3300. What setup do I need to change in the P3300 in order to be able to get to the internet through the laptop's WIFI connection? Thank you for any help.
Should happen automatically if you have a standing ActiveSync connection. No special settings needed. On the other hand - Check your firewall. Maybe some soft on the laptop is preventing your PDA from getting access to the internet!
Thanks Theonly1....one other thing though, I am using Vista ultimate x32....
not tried this yet but....just plug in and it will recognise the phone as a modem or GSM connection for internet surfing on the laptop?
Thanks again
Thanks for the feedback
Hi,
Thanks for the feedback. I have try to disable the firewall, but it still cannot connect to the internet. By the way, the laptop us window XT. If I enable the WIFI on the P3300, then it can connect to the internet by it's own WIFI. But if I disable it's own WIFI, then it did not connect to the internet throught the laptop's WIFI connection. I think there must be some setting in the network connection, so that it will be able to use the laptops WIFI and get information through it. But I do not know how. Any help is appreciated. Thanks again
Some programs don't initiate a connection to 3G automatically. So I have to start IE or something else to intiate it. Then go back to that program. Is there a util to do it manually?
In comm manager there is a 3G button, but it turns off 3G. Also there is an internet sharing button, but it goes to the internet sharing app. Ideally, it would be great to have the 3G button intiate a connection or drop the connection.
Is this possible?
HTC Custom is what you need m8.
http://forum.xda-developers.com/showthread.php?t=307215
The screen shot there shoes that allows you to either have an always on connection or a disconnect option.
Hope it helps.
Sorry, I really have searched everything I can think of. I have looked all over, I am just trying to find out what the regedit is to use the internet connection on my computer via usb on my t-mobile dash. I am running WM6.1 and have no signal over here for my phone. internet on the computer yes, but dash no. Does anyone know or know where I can look for it? I promise I have searched.
wm1 said:
Sorry, I really have searched everything I can think of. I have looked all over, I am just trying to find out what the regedit is to use the internet connection on my computer via usb on my t-mobile dash. I am running WM6.1 and have no signal over here for my phone. internet on the computer yes, but dash no. Does anyone know or know where I can look for it? I promise I have searched.
Click to expand...
Click to collapse
hook a wifi router up =)
other than that maybe put a bluetooth receiver on the pc and connect the phone to it?
I'm useing kavanas 6.1 rom i tweaked it a little but point being when i plug my dash into my comp and it syncs with active sync my phone accesses my computers internet connection which i think its designed to do. how do your internet and active sync settings look like?
under your USB to PC settings under connections do you have the Enable advanced network functionality checked?
Use ActiveSync to "pass through" this computer. That means the connected device can use the computer's network connection as if it were its own. You can use this feature to perform tasks such as downloading non-Outlook e-mail messages, to connect directly with Microsoft Exchange, or to browse the Internet.
Important Note For additional security, disable network bridging on the PC (specifically, bridging to a Remote NDIS adapter) before connecting to the PC to pass though to the Internet or a network. For more information on network bridging, see Windows Help on the PC.
Click Connection Settings.
Select Open ActiveSync when my device connects.
In the This computer is connected to list, select a connection to which this computer should connected when passing through ActiveSync.
thats from activesyncs help.
i guess i never realized it did that...yet i do it everyday...when its plugged in, edge doesnt even try to connect, it defaults to the pc
Thanks
Ok Gixxum,
You rock, I changed my deal to internet instead of automatic and it worked perfectly. I never thought to look there. Thanks. Now my roomate and I can surf the net at the same time.
wm1 said:
Ok Gixxum,
You rock, I changed my deal to internet instead of automatic and it worked perfectly. I never thought to look there. Thanks. Now my roomate and I can surf the net at the same time.
Click to expand...
Click to collapse
rock on brother