Originally, this was posted by someone else at the following link:
http://forum.xda-developers.com/showthread.php?t=432342
The problem is, in this forum and in ppcgeeks, there is no clear cut answer. Truthfully, I dot really want to assign buttons, however, there are other options that are available for personalizing. Following this paragraph is my situation:
Phone: Sprint HTC Touch Pro 2
ROM: Stock - Windows 6.1 & Manila 2.1
I have a few apps, but none that should have messed with these settings (MS My Phone, Resco File Explorer (has the ability, but I didn't change it through it), Resco Radio, Resco Picture Viewer Pro, a few games, Office Mobile 10 beta, etc... The rest are all stock, coming with the phone)
When I go into the button config here is the settings:
Send Key(Hold) - Voice Command
Button - <Context Menu>
Button - <Today>
Button - <Context Menu>
Button - <Context Menu>
Button - <Context Menu>
When I try to goto any other tab in the setting program, it tells me "Each program button must have a unique button assignment" and then goes back to the button assignment tab. When I try to exit, goto the today screen, or open any other program it does the same.
There are three possible ways of dealing with this:
1. Deleting these other button assignments - The problem here is I don't know what buttons these refer to and if deleted could pose problems.
2. Changing the names - Not really changing the names, I guess to me, it seems that the system is assigning five separate possible tasks to "Button." Again, not knowing what these buttons refer to, if changed, I could have to press volume up to hang up a call and press the power button to send a call.
3. Hard reset - I thought about this, but there are a few places where there have been cases of people trying this and it didn't do anything. I guess I would rather try alternatives before going through this drastic a measure.
If anyone has ideas on how to do any of these (save the hard reset, as I know that), I would be very much appreciative. Also, if any one has any other suggestions, besides those above, I would be more than happy to try them.
Thanks.
Edit:
Thought it prudent to add, most of these apps (save of course Office 10 beta) that I now have, I have had through three phones (Mogul, Touch Pro, touch pro 2). The first two never had any problems with these apps and as they are all HTC phones, I don't see why it would cause these kinds of problems in this phone and neither of it's predecessors.
Sorry.. haven't heard a reply, so Bump it up.
such an story,, such an answer..
the best way to assign app/programs to buttons is with this program!!
http://forum.xda-developers.com/showpost.php?p=4434797&postcount=1
I was just about to post that link!
OP, whatever it is you're using to remap keys, drop it and use the linked keyboard controller. It's ridiculously good.
Related
hi guys , i know this might seem a strange question but like most my stylus is loose in the holder and i sometimes need to use the keyboard to do most things on the unit and i cant find anywhere that activates the start option on the screen. I have done it by accident once but nothing since. i have checked the manual and it mentions it no where all operations seem to be around the stylus?
does anyone know what key combination it is ?
I have a 02 phone and unlike tmobile which has a one of the 4 buttons on front setup to do this as one of the defaults.
cheers in advance
It should be ctrl+escape on a full keyboard. It might also be enabled by the windows or context menu keys, not sure what your keyboard looks like.
You can use my VJKeypress to get this as well. I think it's keycode 91, not sure, check my website.
V
Im talking about the blue angel, xda 2s keyboard thanks you for reply im not talking normal pc keyboard it does not have ctrl esc or alt on 02 xda 2s keyboard
Sorry! I've never seen a BlueAngel keyboard
V
Why not assign one of the hardware buttons to do this, each one can have a duel function assigned either a tap or hold, according to the phone, in reality this doesn't work (unless anyone knows different - latest O2 ROM - not messed around with), whatever you set for a tap is also carried accross to the hold function, go to settings and locate the power buttons icon select it, then select the button you want (ok for example) then assign the <Start Menu> from the drop down box, press OK, the device might want a soft reset (mine did when I just tried this), when it comes back up hit the assigned button, and use the four way thumb control to navigate through the menus, it saves sliding out the keyboard and it becoming loose - Mike
cheers for this when i tried to reassign buttons before like the camera it wouldnt let me change them ..i hate the camera button getting accidently caught same as the record one as well.
cheers for the advance will do that would just like to know for my own peace of mind as well how to use the keyboard to do it, it should be possible.
I've done some searching around but I haven't found answers to some specific questions I have. I'd appreciate if someone could take the time to enlighten me. I gather there will be quite a few new Orbit users looking in here in the near future and it might help them too.
1. My first concern, is how could I do a complete restore to factory settings if my windows install becomes corrupt? Is there a way of backing up the phone before I put too much stuff on it, and restoring all the windows files afterwards?
2. When I hit the X button in the corner of the screen it minimises that window but doesn't close the app. Is there a way to force this button to close the app completely, or add another button for closing apps?
3. In file explorer I can list a load of MP3's I have put on the card, but because they are named with the album name first, the name of each track is cut off by the Date and Size column. Is there any way of editing the listing format, or forcing it to scroll so I can read the track names? Perhaps a TweakUI-type program?
4. I'm familiar with registry editing via regedit and regedit32. I see reference to editing registries on the Xda's, what program is most commonly used, I can't find an editor on the phone.
That's about allI can think of for now I'm sure I'll come up with some more questions later.
Thx, Pete.
1. You are talking about a hard reset. On the orbit, hold down both softkeys, then with the stylus push into the tiny hole (reset button) on the left hand side, and release whilst still holding down the two soft keys. The screen will switch off and after a short while, writing will come up on the screen asking do you want to hard reset, you will loose all your data.... blah blah blah. You need to press the green send key (answer button) and it will restore everything back to factory state, i.e. the same state as if you turned it on for the 1st time. Your personal data will be lost, but you should back that up to a external memory card. There is no need to backup any windows files etc, a hard reset will always put it back to out of the box state.
2. I personally don't worry to much about closing the applications, but there are many freeware apps that will make the x button actually close the application instead of minimising it. I think Smartkey is one of them. Alternatively, the O2 software has something on the tray which if you click, it will show you all the running applications and allows you to close all or any one of them.
3. Sorry. Don't know, don't use mine for mp3s.
4. Again, there are freeware apps available Total commander is one of them. I use Resco Registry Editor although you have to pay for that.
Does anybody know where I can get a "Back Button" aka "Go Back" aka "previous" aka "return" command that could be assigned? I use to have a smartphone and now have a ppc. It is probably the button I used and missed the most. Easy to just go back a step if you made a wrong entry/selection etc, (kindof like the "up" command in file explorer, but different and a little more involved than the Alt-Tab for switching programs)... This would take me to the next level.
I would like to assign it to HButton as I have the "Alt-Tab" program. This function is good only to Switch between different programs and sometimes you just need to go back a step in the program you are in.
I notice a lot of Samsung devices both PPC and Smartphone have this button actually on the device and the program assigned to it. So maybe someone with a device by them could extract it for me??????
CG
Does anybody know where I can get a program that simulates the Back Button on many smartphone and some ppc devices. It is a "Go Back" aka "previous" aka "return" command that could be assigned. I would like to assign it using Hbutton to one of the buttons on my 8125.
I use to have a smartphone and now have a ppc. It is probably the button I used and missed the most. Easy to just go back a step if you made a wrong entry/selection etc, (kindof like the "up" command in file explorer, but different and a little more involved than the Alt-Tab for switching programs)... This would take me to the next level.
Thanks
CG
It's not that you are asking the wrong question, its that there is no answer...
You see all that 'back' button does is send the same code as 'Esc' key on your PC keyboard. (thats 0x27 if you are interested).
There are probably several utilities that can simulate this, but the problem is the whole OS and the apps designed for PPC are not made to take in to account the existence of a 'back' button so they just won't respond to it.
(Well maybe some will, but it will never work as smoothly as on smartphone and may have some undesired side effects).
My send key is sticking.
1) How do I disable the send key
2) how can I start the phone application with a shortcut ( I would need it if I can disable the send key)
3) how do I change my text message that I can send for an incoming phone call. I've changed it before, but cannot remember how.
1) Why on earth would you want to do that?
2) Your start menu should already have a short-cut somewhere in it with the phone application, just find it and use it.
3) Start Menu/ Settings/ Personal/Phone/Advanced (this is on a WWE rom).
Ok, found #4.
Also, lookined in the windows directory and found vtkey.exe (phone application) and redial.exe (redial). Does anyone see a problem with renameing them so hopefully my send key will not be able to use them?
There is a System -> Button application. Guess I could map the end key hold to the vtkey_rename.exe?
OK, how do I rename system files?
Because my hardware send key is sticking and it constantly opens the phone application and redails the last person I spoke to. My friends are getting quite annoyed and I do not want to spend a week of my life reloading a new phone with my software.
Do you have a better solution?
I do not have a phone dialer application on my start menu. I had to find vtkey.exe in the windows folder.
thebrenda said:
Because my hardware send key is sticking and it constantly opens the phone application and redails the last person I spoke to. My friends are getting quite annoyed and I do not want to spend a week of my life reloading a new phone with my software.
Do you have a better solution?
I do not have a phone dialer application on my start menu. I had to find vtkey.exe in the windows folder.
Click to expand...
Click to collapse
Maybe you can remap the hardware key to nothing? The remap program is in the themes and apps section.
Maybe you can remap the hardware key to nothing? The remap program is in the themes and apps section.
I turned off all the Sense/FLO stuff that I could find. Mostly I have just stock WM 6.1. I do not see themes. I do have Settings-> Personal -> Buttons. But I cannot figure out how to add the Send Key. I have the following. My phone has 4 buttons and not really sure how to use the Buttons screen.
Send Key (Hold) <None>
Button <Today>
Button <Context Menu>
Just tryed to remap the key using Rhodium Keyboard control. Worked flawlessly
Where is the keyboard control?
I have T-Mobile HTC TP2, WM 6.1.
Take a copy of a link file .lnk of any application you have on your phone and rename it to short_send.lnk and put in \windows. Same trick works with long_send.lnk, short/long for end and power buttons. By doing this i created button shortcuts to apps i want. Super convenient.