hi there, i recently upgraded my rom to the official orange upgrade, but ever since i've done that, each time i open tomtom 6 it connects to the internet via 3G. i never had this problem before, can someone help/advice plz. thanks
turn off a-gps in the connection settings menu
ok, thanks i'll give that a try
thank you, it works as it should now
Related
hi
i have a belkin g wireless 802.x.G router at home and have a wifi setup since long..
i was always able to connect to the wireless network with Bluangel aswell as my laptops.. (i have no encyrption.. or secutrity settings)
i upgraded the radio rom to 1.12 and after that have not been able to connect to the network.. it says belkinG network found and connected but the internet explorer or msn or agile messenger cant seem to find the net settings..
internet is on share in main computer nad my lap tops still conect and use it..
i thought may be it was because of rom 1.12 but flashed older 1.31 imate with ext rom and radio rom but still cant get the internet to work..
when i use PIE it says network card not found..check settings..
in wireless settings i can see it saying that it is connected to belkin network
can anyone help me
thanks
zohaer21 said:
in wireless settings i can see it saying that it is connected to belkin network
can anyone help me
thanks
Click to expand...
Click to collapse
can you see if your pda2k's wlan adapter has an IP address? if not, then only radio is connected but that doesn't mean you have a working network connection.
I use vxUtil which is a collection of network tools, this enables me to ping, check settings, ip addresses and a whole lot of other stuff since the onboard utils just don't cut it for network use..
argh
I have the same problem although I havent upgraded any radio settings! My Wifi has worked fine since ive had my m2000, being able to stream video and music or surf the web. but recently i cant surf the web although I can still stream music.
Ive downloaded the program you reccomended, but not to sure what to do with it. Any help would be ideal
Thanks
hi
thanks guys.. i dont know what happened but everything is eorking now ..including the net.. just turned wifi on.. it asked me again whether this is for work or internet (evn htough i had it connected to internet last time aswell)
thanks
hello again!
i finally managed to reanimate my mda3 and flashed it with some newer rom files. actually everyhing seems to work, everything besides the wireless lan connection!
i just cannot accomplish an internet connection with the wlan i have and i am pretty sure, that the settings are all correct! there must be some problem with the mda's ethernet adapter, but i dont know what!?
the adapter seems to be searching and scanning the connection, but when trying to connect to the internet with the browser, i cant.
are there known problems with wlan, which appear after certain rom updates?
is there a way to check, if the wlan adapter of my mda is still working?
i really dont know how to start and eventhough i read thru lots of postings regarding wifi, i was not able to fix it myself!
please help me!
thx in advance,
k
hello again!
i still can not connect to the wlan!! it's freaking me out and the more i read, the more confused i get! please help me, if u can!
here are my current specs:
i have a PH20B Pocket PC with following roms installed:
ROM-Version: 1.42.01
ROM-Date: 09/05/05
Radio-Version: 1.13.00
Protokoll-Version: 1337.42
ExtROM-Version: 1.42.122 GER
are there known issues regarding those versions? (should i up/downgrade to an other rom?)
does WM5 have any advatages regarding this matter? or is it the same as 2003?
is there a way to check if the WiFi hardware of my device is still okay?
any help is very much appreciated!
thx in advance,
krztf
still...
hello again!
seems like i am talking to myself here again...
i searched the forum and read so many threads about that problem, noone ever posted a working solution! weird, because i think the wifi is one of the big pros of the Blue Angel!?
i can find lots of access points (with or without WEP), but i still cannot connect to any of them!
well, i managed to connect to one AP only once! (it was a open AP, Netgear hardware). so at least i know, that my wifi adapter is not broken or something.
is the blue angel's wifi adapter just cheap crap which is not compartible with most of today's hardware or am i missing something?
are there plugins or driver updates to cope with this?
i am curious: is there someone, who can connect to most WLAN Routers without problems?
hopefully, someone will share experiences soon...
regards,krz
There are some problems with the wm5 and wifi. With the explode's rom I can't connect with any network using wpa. So I tryed baniaczek's one and it worked better but I had other problems, so finally I downloaded the vanilla version of the latest aku and cooked my own rom so now I'm happy with it.
call me noob!
well...hi again.... i actually thought about changing my forum identity because i am a little ashamed right now... why? well.... i finally discovered where the actual problem with my wlan connection was.... the router i was desperatly trying to connect to can only be controlled and configured by my isp, whom i now called to find out that the router was set to "802.11g only" ... stupid!! all pros around here might know, that the mda 3 is only supporting 802.11b.... it took me hours and days to get that!!
long story told short: support guy reconfigured router to "mixed mode" and while still talking to him on the mda-phone, the mda-wifi connected without any problems... I AM HAPPY!
Always remember:
SET ROUTER TO MIXED MODE, FOR THE MDA III SUPPORTS 802.11b ONLY!
KRZTF said:
hello again!
i still can not connect to the wlan!! it's freaking me out and the more i read, the more confused i get! please help me, if u can!
here are my current specs:
i have a PH20B Pocket PC with following roms installed:
ROM-Version: 1.42.01
ROM-Date: 09/05/05
Radio-Version: 1.13.00
Protokoll-Version: 1337.42
ExtROM-Version: 1.42.122 GER
are there known issues regarding those versions? (should i up/downgrade to an other rom?)
does WM5 have any advatages regarding this matter? or is it the same as 2003?
is there a way to check if the WiFi hardware of my device is still okay?
any help is very much appreciated!
thx in advance,
krztf
Click to expand...
Click to collapse
KRZTF said:
well...hi again.... i actually thought about changing my forum identity because i am a little ashamed right now... why? well.... i finally discovered where the actual problem with my wlan connection was.... the router i was desperatly trying to connect to can only be controlled and configured by my isp, whom i now called to find out that the router was set to "802.11g only" ... stupid!! all pros around here might know, that the mda 3 is only supporting 802.11b.... it took me hours and days to get that!!
long story told short: support guy reconfigured router to "mixed mode" and while still talking to him on the mda-phone, the mda-wifi connected without any problems... I AM HAPPY!
Always remember:
SET ROUTER TO MIXED MODE, FOR THE MDA III SUPPORTS 802.11b ONLY!
Click to expand...
Click to collapse
Call me "noob" II.... I have been enjoying my WM 6.0 upgrade on my SX66 for about a month now thanks to helmi's wizard. The ROM flash was flawless and I love all the new features beyond WinCE2004. however, I could not get WLAN connectivity no matter how I configured the network adapter or WLAN settings...... I am a Senior Network Engineer and have worked on 6 Gig microwave transmission systems since 1967 and thought I knew evrything about WLANs.... anyhow, as soon as I read your plea for help the light bulb came on and I reset my D-Link Gateway Router to allow 80211b connections and like your experience the BA was WLAN connected before I saved settings and exited the router.
Now like you I am happy and somewhat "humbled"..... I really appreciate your explanation of the problem and your followup on the trouble resolution which allowed me to only spend hours and not days to fix it!!
Thanls again,
wrdan
Hi there
I just had a problem like yours and solved it changing my router to work in 802.11b mode only... In mixed mode it behaves exactly like you mentioned in your case.
Check my thread
Hope it helps
Hi,
I just upgraded my Hermes ATT 8525 from WM5 to the following WM6 version which I downloaded off of rapidshare site:
4. WM6 Cingular USA version (same as the official but cingular customized and radio version 1.48) thanx madcap180
Everything is working great, the upgrade was smooth and I was able to get all my data back and all that except for the WIFI connection.
I am able to connect to my Home Wireless Secured Network (SSID), and it shows that it is connected and has almost all the green bars showing excellent signal quality, but when I try to use Messenger or Internet explorer, it doesnt work. I am not sure why? Is it trying to connect using GPRS or cingulars Internet connection? If so, how do I fix it so that It connects using my home wireless connection. I do not subscribe to ATT/Cingulars Internet data plan etc,...
Any help will be greatly appreciated.... thanks
You should read the thread for this rom and ask your question there:
http://forum.xda-developers.com/showthread.php?t=317339
Thank you much! I posted my question under that post.....
Hi
I am facing issues in Windows Mobile 6 HTC TyTN, not able to connect internet after disconnecting from internet sharing. Device is working fine in the case of internet sharing using GPRS EDGE but after disconnet now in device internet is not working, network side it is showing as connected but not able to browse using internet explorer, when trying to connect using internet explorere it is giving error as page can not be displyed, connection lost. i already tried using clearing all cookies and history files and even tried using soft reset also.
Please advice is this a issue in OS or need to do some setttings. Thanks in advance for help.
Ranjan
I have the same problem with my Dopod. I don't know the actual cause but what i did to correct the problem is just turn off and on the device back. It can handle internet sharing as it should be.
I am still having issue... Experts... please help. I am not able to connect to Internet from phone but it is working perfect as modem.
Thanks in advance.
Ranjan
this has happened to me before and it was fixed by doing a soft reset.
If that doesn't work, check your connection settings.
Thanks for reply.
I even did soft reset, still internet is not working. My connection settings are fine that is the reason for connecting my phone as modem to my laptop.
Is there any other problem......
Thanks,
Ranjan
Hi. I've been experiencing some issues with the S620's WiFi.
I can connect to visible networks even with WPA2/AES,
but I cannot connect to my home's invisible network.
When I enable the SSID to be visible, I can connect though.
I'm using the latest 3VO ROM and the latest Radio.
Have you selected "This is a hidden network" at the settings of the connection?
Yes ofcourse I've done that.
Any other suggestion?
Isn't that a known issue?
I think no, couse it works for me...
Connected to Wifi but connection error when open IE
Hello,
I am having problem when try to open a website from IE. I am connected to my home WiFi network. I am on preinstalled ver WM 5.1. I am thinking to install WM 6.1. Any idea or suggestions.
MeRookie said:
Hello,
I am having problem when try to open a website from IE. I am connected to my home WiFi network. I am on preinstalled ver WM 5.1. I am thinking to install WM 6.1. Any idea or suggestions.
Click to expand...
Click to collapse
Upgrade my friend, you will be amazed with the new roms available for the excalibur and the amazing apps that come with them (other options than IE). I will recommend you to grab a cup of coffee or tea (well more than one I think..lol) and go deep reading the STICKY in the first thread of this forum you will find everything you need there...to get your excalibur tune up...