rom flash stop @ 37% and error 226 is shown....
spl tried: 1.23 & 1.4 & 1.9olinex & original diamond spl
radio tried: 1.09.23.25, 1.00.25.05, 1.15.25.14
rom of the choice : [WWE] Windows Revolution 7.1B (23071)
(http://forum.xda-developers.com/showthread.php?t=563245)
also tries flash with macadam v1.2(previous one) but fail with same error
rom writting method tried: mtty, and custom ruu
[both fail with error226]
[mtty=i follow instructions on this treads-
[url]http://forum.xda-developers.com/showthread.php?t=540290][/url]
wow...really couldn't be arsed to use the search eh!
if you'd typed that into the SEARCH box instead of the NEW THREAD box you'd have got your answer by now
d-signet said:
wow...really couldn't be arsed to use the search eh!
if you'd typed that into the SEARCH box instead of the NEW THREAD box you'd have got your answer by now
Click to expand...
Click to collapse
thanx 4 reply....
tried the way as describe in other tread...cant work....that why i post a new tread...
did you try flashing from internal storage?
i faced this error one time
hey ,
i faced this error and what i did ,just changed the rom and used original rom from htc site after that it was ok , try that
hayyaan said:
did you try flashing from internal storage?
Click to expand...
Click to collapse
ya....using mtty in bootloader mode........failed
aattar80 said:
hey ,
i faced this error and what i did ,just changed the rom and used original rom from htc site after that it was ok , try that
Click to expand...
Click to collapse
still didnt work.......tried 2.03.707.2...latest rom...still stuck @ 37 %...
mygreatdiamond said:
still didnt work.......tried 2.03.707.2...latest rom...still stuck @ 37 %...
Click to expand...
Click to collapse
r 1.00.25.05
G 52.29.25.12h
D 1.93.00.00
those no show on screen after spl flash....but still cant falsh new rom....help...help.....help.....
mygreatdiamond said:
r 1.00.25.05
G 52.29.25.12h
D 1.93.00.00
those no show on screen after spl flash....but still cant falsh new rom....help...help.....help.....
Click to expand...
Click to collapse
Stand by, friend
Have you finished the step "install driver.." (in MTTY topic)
And what's the OS you are doing...
PhuocTri said:
Stand by, friend
Have you finished the step "install driver.." (in MTTY topic)
And what's the OS you are doing...
Click to expand...
Click to collapse
yes....in mtty can detect usb and can connect to my phone......
after task 8 can enter falsh update mode...but update terminate @ 37%
any idea?
try to format internal storage also.
nrgxtra said:
try to format internal storage also.
Click to expand...
Click to collapse
do u sure about that?
coz i left my backup files and photo there....
i had read a tread said use sec unlocker can solve the problem....
looking ro try sec unlocker first....
mygreatdiamond said:
do u sure about that?
coz i left my backup files and photo there....
i had read a tread said use sec unlocker can solve the problem....
looking ro try sec unlocker first....
Click to expand...
Click to collapse
I had almost the same problem with sun y manila 2.5, after returning to nataly 2.7 nothing happened and just when hard reset with format, everything went ok. But in my case installation was almost ok. Or you need more advanced help. Stuck at 37% seems to damaged cluster of internal storage, but can't be sure. At your place I would try to find help at local technician. Wish You luck and hope return your diamond back!
aattar80 said:
hey ,
i faced this error and what i did ,just changed the rom and used original rom from htc site after that it was ok , try that
Click to expand...
Click to collapse
i tried original 1.93.707.1 and 2.03.707.2
still cant fix it....
anyone know how to recover data from internal storage in bootloader mode(by using mtty @itsutils)?
nrgxtra said:
I had almost the same problem with sun y manila 2.5, after returning to nataly 2.7 nothing happened and just when hard reset with format, everything went ok. But in my case installation was almost ok. Or you need more advanced help. Stuck at 37% seems to damaged cluster of internal storage, but can't be sure. At your place I would try to find help at local technician. Wish You luck and hope return your diamond back!
Click to expand...
Click to collapse
u mean format with internal storage?
Related
i tried to upgare my bootloader
with the black edition but when i start the rom upgrade it asked me what boot loader i have
so i had 1.01
when i give that option it tells me to run the rom only with mityy
but i saw an option in the rom upgrade that say force spl so i choos that option and after few second it finished and i see i have 1.13 oli
so it works that way because i didnt peek version in the rom upgrade i just peek the force spl
????
yes, it worked... as you can tell BY THE FACT YOUR PHONE IS STILL OK... why the hell did you waste YOUR TIME AND OURS by posting a whole ****ing topic telling the world "whoopee my flash succeeded because I followed instructions."
sorry man!"'
but after idid it my phone some times fast and in the begining it slow
somthing hapend?
do i need to do somthing now?
Yea, And if you would have read the Hard SPL thread or the Upgrade Guide by MrVanx you would have known what to do! I guess it's good someone like Olipro took the time to create this!
bubu23 said:
sorry man!"'
but after idid it my phone some times fast and in the begining it slow
somthing hapend?
do i need to do somthing now?
Click to expand...
Click to collapse
nope... you don't need to do anything at all, that's completely in your head.
yes but in the tread how to make hard spl it say simply if you have
1.01 then choose the first(blue)
when i choose it it tell me that i cant continue that i need to do it with mitty
but i didnt choose the boot loader i have i just choose the force sspl then it worked i hope
bubu23 said:
yes but in the tread how to make hard spl it say simply if you have
1.01 then choose the first(blue)
when i choose it it tell me that i cant continue that i need to do it with mitty
but i didnt choose the boot loader i have i just choose the force sspl then it worked i hope
Click to expand...
Click to collapse
IT WORKED, IT WORKED, IT WORKED, IT WORKED DOT ****ING COM
stop worrying and move on with your life... christ
Olipro,
hi,
I flash with LVSW's full update with 1.13Oli SPL, During the first screen I select Force SSPL. After flash the ROM I got white backgroud on Today's screen. I read through few people's experience with white background and try to fix it. Nothing works so I flash the OS only upgrade. The upgrade stop in middle of flashing. Later I discover the DL files were bad. Now, my 8525 bootup into 3 color screen with:
herm 1.13Oli screen. No activeSync connection..... In XP I can see the MobileDevice, but nothing within the folder.
Is it my device is now brick??
Any help will be appreciate.
Penske MB said:
hi,
I flash with LVSW's full update with 1.13Oli SPL, During the first screen I select Force SSPL. After flash the ROM I got white backgroud on Today's screen. I read through few people's experience with white background and try to fix it. Nothing works so I flash the OS only upgrade. The upgrade stop in middle of flashing. Later I discover the DL files were bad. Now, my 8525 bootup into 3 color screen with:
herm 1.13Oli screen. No activeSync connection..... In XP I can see the MobileDevice, but nothing within the folder.
Is it my device is now brick??
Any help will be appreciate.
Click to expand...
Click to collapse
go to the Hard-SPL thread, download the new Hard-SPL.
when flashing, select 1.11 and tick Hard-SPL (or don't, doesn't really matter).
go through the flash, let it update your SPL.
now, with 1.30, flash the latest LVSW WM6 ROM, or any other
Hi,
Thx for the fast response.
I have DL your newest Hard-SPL V4 version 1.30Oli. When I run the update it shows error (264) connection. No matter what, it will not update.
I have remove and reinstall activesync, but XP will find the device, but no activesync connection.
What should I di next??
THX
Olipro said:
go to the Hard-SPL thread, download the new Hard-SPL.
when flashing, select 1.11 and tick Hard-SPL (or don't, doesn't really matter).
go through the flash, let it update your SPL.
now, with 1.30, flash the latest LVSW WM6 ROM, or any other
Click to expand...
Click to collapse
Penske MB said:
Hi,
Thx for the fast response.
I have DL your newest Hard-SPL V4 version 1.30Oli. When I run the update it shows error (264) connection. No matter what, it will not update.
I have remove and reinstall activesync, but XP will find the device, but no activesync connection.
What should I di next??
THX
Click to expand...
Click to collapse
put a full LVSW NBH (as HERMIMG.nbh) on a MicroSD card and put it in your Hermes
When I power on 8525, it just show 3 colors screen. OS will not boot, it just star at 3 colors screen. How can I run the files Under MicroSD card?? Or the device will automatically run the NBH??
THX
Olipro said:
put a full LVSW NBH (as HERMIMG.nbh) on a MicroSD card and put it in your Hermes
Click to expand...
Click to collapse
Penske MB said:
When I power on 8525, it just show 3 colors screen. OS will not boot, it just star at 3 colors screen. How can I run the files Under MicroSD card?? Or the device will automatically run the NBH??
THX
Click to expand...
Click to collapse
call it HERMIMG.nbh and it will
Hi,
It is starting now and I will post the result soon. If it works, I will definitely send you my donation!!!
Olipro said:
call it HERMIMG.nbh and it will
Click to expand...
Click to collapse
Oli
Thanks foe all your help. I have kept my promise. Please chech youe Paypal account
Now, can you help me why I still have the white screen on Today screen??
thx
Penske MB said:
Thanks foe all your help. I have kept my promise. Please chech youe Paypal account
Now, can you help me why I still have the white screen on Today screen??
thx
Click to expand...
Click to collapse
If you read the forum thread associated with the newest LVSH this is a known problem and several solutions have been suggested - read the post and try the suggestions.
----------
Penske MB said:
Thanks foe all your help. I have kept my promise. Please chech youe Paypal account
Now, can you help me why I still have the white screen on Today screen??
thx
Click to expand...
Click to collapse
thanks very much... much appreciated.
have you tried going to the today screen item in settings and manually setting a today image?
i Download And update 6.5 rom directly pressing resset button and holding volume down + back key. now what happend after update success my devise hang on O2 Welcom screen
can i get it back to work plz reply me quick
I am having problems as well with it, where in the internal memory did you put the DIAMIMG.NBH file because I just put it in the first place I seen in it.holding those buttons does nothing for me.
1. HardSPL is in?
2. If you had and ROM before that has less size then try to flash your new ROM using MTTY
michal_banszel said:
1. HardSPL is in?
2. If you had and ROM before that has less size then try to flash your new ROM using MTTY
Click to expand...
Click to collapse
Hello, I have same problem, had HSPL 1.4, tried all versions from 1.23 to 1.93 as well as flashed many radio'sand roms from stock esn and wwe ones to Udk's/aztor/cloudyfa/tom codon.
Created a 0 KB "welcome.not" file on root to bypass the welcome screen and is fine but as touchscreen is not responding, I cannot do anything else with devise.
I mostly flash from device.
Any Idea anyone
Thanks in advance
jungl1st said:
Hello, I have same problem, had HSPL 1.4, tried all versions from 1.23 to 1.93 as well as flashed many radio'sand roms from stock esn and wwe ones to Udk's/aztor/cloudyfa/tom codon.
Created a 0 KB "welcome.not" file on root to bypass the welcome screen and is fine but as touchscreen is not responding, I cannot do anything else with devise.
I mostly flash from device.
Any Idea anyone
Thanks in advance
Click to expand...
Click to collapse
try the mtty as mentioned above - follow steps in this thread: http://forum.xda-developers.com/showthread.php?t=540290
also - most of these (virtually all) are GSM, hope you're not flashing on CDMA
cloudedhopes said:
try the mtty as mentioned above - follow steps in this thread: http://forum.xda-developers.com/showthread.php?t=540290
also - most of these (virtually all) are GSM, hope you're not flashing on CDMA
Click to expand...
Click to collapse
I'm flashing on GSM so it should be fine.
Even if I've been around for a while, I've never used mtty,so I hope it does wonders as my pc is going crazy flashing about every rom, radios or HSPL without nay improvement so far.
Many many thanks for the help and link, I'll give it a go asap.
Hello Guys
i have T-mobile Dash. last night i was using IE but unfortunately one of website was infected with virus so it damage my phone also then my phone gose black and after that when ever i try to switch it on my phone goes on T-mobile logo n stuck on it.then i try to re flash my phone with its official T-mobile Rom and every thing goes correctly now my problem is that after reflashing my dash.my phone is working very slow n getting stuck again n again. sometime it gives *SIM INVALID ERROR* and i am unable to receive my text messages so can any one help me out plzz. or can any one guide me about which ROM is good n suits my T-Mobile Dash.thanks u all in advance
specs (in tricolour screen)
Excalibur Wifi
ONBL 1.22.0000
--------------------------------
Excalibur
SPL 1.22.0000
--------------------------------
Excalibur IU
plzzzzzz guys help me out. im really worried
thanks in advance.
ShahX said:
Hello Guys
i have T-mobile Dash. last night i was using IE but unfortunately one of website was infected with virus so it damage my phone also then my phone gose black and after that when ever i try to switch it on my phone goes on T-mobile logo n stuck on it.then i try to re flash my phone with its official T-mobile Rom and every thing goes correctly now my problem is that after reflashing my dash.my phone is working very slow n getting stuck again n again. sometime it gives *SIM INVALID ERROR* and i am unable to receive my text messages so can any one help me out plzz. or can any one guide me about which ROM is good n suits my T-Mobile Dash.thanks u all in advance
specs (in tricolour screen)
Excalibur Wifi
ONBL 1.22.0000
--------------------------------
Excalibur
SPL 1.22.0000
--------------------------------
Excalibur IU
plzzzzzz guys help me out. im really worried
thanks in advance.
Click to expand...
Click to collapse
wrong forum my friend. I will move your thread to the correct forum.
On another note, it's quite difficult that your phone gets a "virus" since WM platform rarely have identified a potential virus yet.
Try a hard hard reset or flash another rom to see if that solves your problem
Mr. Clown said:
wrong forum my friend. I will move your thread to the correct forum.
On another note, it's quite difficult that your phone gets a "virus" since WM platform rarely have identified a potential virus yet.
Try a hard hard reset or flash another rom to see if that solves your problem
Click to expand...
Click to collapse
thanks alot dude for your reply. and friend i already reset it and already re flashed it with T-mobile ROM but still the same but im looking for cooked ROM but can't find it so plzz can u help me with that!
I will recommend you to start reading here .
I hope that helps.
Mr. Clown said:
I will recommend you to start reading here .
I hope that helps.
Click to expand...
Click to collapse
thanks bro it solved my problem but still having Sim error/ message sending fail.. but bro need ur help again i accidentally re flash my phone without making pictures backup and they were very important pictures. so is their anyway to recover my pictures back plzzzzzzz help me out!!
THANKXXXX...
As I know, there is no way to restore delated files after flashing (HardReset)... Sorry...
ShahX said:
thanks bro it solved my problem but still having Sim error/ message sending fail.. but bro need ur help again i accidentally re flash my phone without making pictures backup and they were very important pictures. so is their anyway to recover my pictures back plzzzzzzz help me out!!
THANKXXXX...
Click to expand...
Click to collapse
No, Sorry
gutek85 said:
As I know, there is no way to restore delated files after flashing (HardReset)... Sorry...
Click to expand...
Click to collapse
You are correct
Hi all,
Can anyone tell me how (if possible) to downgrade back to 2.1 (JM5 or JM8) successfully as each time i try all i get on the first reboot is an error (cannot see error as to quick) which then reboots?
DemolitionManHD said:
Hi all,
Can anyone tell me how (if possible) to downgrade back to 2.1 (JM5 or JM8) successfully as each time i try all i get on the first reboot is an error (cannot see error as to quick) which then reboots?
Click to expand...
Click to collapse
And you didnt read the big explanation of how to do it in first posts in jm6 (not sure), jm7, jm8 and ji1 threads why?
dupel said:
And you didnt read the big explanation of how to do it in first posts in jm6 (not sure), jm7, jm8 and ji1 threads why?
Click to expand...
Click to collapse
Which post?
DemolitionManHD said:
Which post?
Click to expand...
Click to collapse
Ever heard of search function? Or at least look through 2-3 pages, its not that hard.
dupel said:
Ever heard of search function? Or at least look through 2-3 pages, its not that hard.
Click to expand...
Click to collapse
Not to be funny but looking through there is a number of post referring to this, thats why i ask which one you are referring to
yep. downgrade straight off the bat, JPC is the wicked error rom which raped yer efs
Just page 2 (and when you started this thread - page one) contains 2 topics by the name:
Release: I9000XWJM8 - Multi CSC(s) Europe (and ji1 obviously) with deteiled instructions on how to install, downgrade and possible solutions to problems.
azuresystem said:
yep. downgrade straight off the bat, JPC is the wicked error rom which raped yer efs
Click to expand...
Click to collapse
Is there a way without errors, if i could see the error as it reboots of screen to fast.
Oops. My bad please ignore
format the drive, i.e hardreset it before you reflash pull out yer sim n external SD etc
1 : hard reset
2 : DLmode
3 : flash yer rom
4 : recovery mode
5 : new hardreset
6 : start up yer rom
if you still keep getting errors i have no clue, only managed to get those while the sd still being in the phone and another partition mounted on the sd
best of luck and read the guides
azuresystem said:
format the drive, i.e hardreset it before you reflash pull out yer sim n external SD etc
1 : hard reset
2 : DLmode
3 : flash yer rom
4 : recovery mode
5 : new hardreset
6 : start up yer rom
if you still keep getting errors i have no clue, only managed to get those while the sd still being in the phone and another partition mounted on the sd
best of luck and read the guides
Click to expand...
Click to collapse
Cheers m8
Interesting to know why would want to downgrade to eclair?
Hi, mainly for reference and current issues i have
Sent from my GT-I9000 using XDA App
nandihno said:
Interesting to know why would want to downgrade to eclair?
Click to expand...
Click to collapse
Possibly as JPH sux big time.. just spent hours trying all sorts of combinations and man it spoils the phone.
Hope Samsung get the REAL release working well..
TrOjAn
TrOjAnUK said:
Possibly as JPH sux big time.. just spent hours trying all sorts of combinations and man it spoils the phone.
Hope Samsung get the REAL release working well..
TrOjAn
Click to expand...
Click to collapse
You should try it with the rombie mod. It freakin rocks
Woolios said:
You should try it with the rombie mod. It freakin rocks
Click to expand...
Click to collapse
yes it's awesome, but also a battery monster
azuresystem said:
yep. downgrade straight off the bat, JPC is the wicked error rom which raped yer efs
Click to expand...
Click to collapse
JPH raped my EFS too. I had JPC doing it, fixed it by deleting /efs/nv*. Funny thing is, right after flashing JPH it had my normal nordic product code - but later it had changed to KOR. Very strange. I wonder if it might have happened when I rooted it? Well, anyway, be careful out there, check product code before up/downgrading.
using micromax a1 past 1 month and this is the only issue i have ..... randomly at times im not able to write data on micro sd card ..... means not able to store clicked pictures , delete/edit content , download content from whatsapp etc , worst part is that it happens without any warning or notification , due to which i lose many pics thinking that i have clicked them but not .... when i open quickpic ( gallery app ) it shows toast notification - "not an error (code 0): could not open the database in read/write mode" , googled the error and found that it is an issue in kitkat , btw im using everything stock ,locked bootloader , non-rooted . i didn't find any proper solution to this.
Any help ?
P.S - problem disappears after a reboot but again comes back after few hours , tried resetting sd card ..... works fine in othe mobile/PC ....
sherrymalhi said:
using micromax a1 past 1 month and this is the only issue i have ..... randomly at times im not able to write data on micro sd card ..... means not able to store clicked pictures , delete/edit content , download content from whatsapp etc , worst part is that it happens without any warning or notification , due to which i lose many pics thinking that i have clicked them but not .... when i open quickpic ( gallery app ) it shows toast notification - "not an error (code 0): could not open the database in read/write mode" , googled the error and found that it is an issue in kitkat , btw im using everything stock ,locked bootloader , non-rooted . i didn't find any proper solution to this.
Any help ?
P.S - problem disappears after a reboot but again comes back after few hours , tried resetting sd card ..... works fine in othe mobile/PC ....
Click to expand...
Click to collapse
tried factory reset ?
habeebrizwan said:
tried factory reset ?
Click to expand...
Click to collapse
yup that too ( i forgot to mention) ...
sherrymalhi said:
yup that too ( i forgot to mention) ...
Click to expand...
Click to collapse
I recommend you to flash it, may be it will fix your problem
habeebrizwan said:
I recommend you to flash it, may be it will fix your problem
Click to expand...
Click to collapse
sorry but i didn't understood .... u mean flash custom rom ? but im waiting for official lollipop update
sherrymalhi said:
sorry but i didn't understood .... u mean flash custom rom ? but im waiting for official lollipop update
Click to expand...
Click to collapse
Nope, said to flash you with stock rom using sp flash tool, lollipop update will be in the last week of January
habeebrizwan said:
Nope, said to flash you with stock rom using sp flash tool, lollipop update will be in the last week of January
Click to expand...
Click to collapse
is bootloader needed to be unlocked to use sp flash tool ?if thats so , then i will wait for cm12 beta 2 , why to go with inferior rom ....
sherrymalhi said:
is bootloader needed to be unlocked to use sp flash tool ?if thats so , then i will wait for cm12 beta 2 , why to go with inferior rom ....
Click to expand...
Click to collapse
I guess you dont need to unlock
habeebrizwan said:
I guess you dont need to unlock
Click to expand...
Click to collapse
ok then ... any link for tutorial? ..... thanks bro for ur efforts
sherrymalhi said:
ok then ... any link for tutorial? ..... thanks bro for ur efforts
Click to expand...
Click to collapse
make sure you have the reuqired drivers installed, just see youtube tutorials, you will get an idea on in this A1 forum, hit thanks if i helped you
I have the exact same problems and i tried using diffrent sd cards but its no use. I know lollipop will fix this issue because google said its bringing back support for sd cards in android 5. Till then i dont know how i can fix this issue. Btw i am on ART runtime . is that causing this problem or will flashing another stock rom work ? Please help.
SD Card Issue
My friend had the same issue with his A1, and I being his "go to guy", I did factory reset, factory reset from recovery mode, installed stock rom again but none of this worked. Finally, i replaced his SD card with mine and tried to click a photo and voila it worked. So morale of the story, buy a new SD card.