Hi guys,can you help me please!!!
I bought t-mobile compact III(lock) is just 4-days old with rom version netherlands.
I try to upgrade it to english rom version with software from PDAMobiz.com.
The installation went smootly without errow(for 15 minutes),but after the hard and soft reset,my T-mobile compact III refuse to boot up to window mobile.
I think I spoil it?
I do not know what to do now.
Help,help and help!!!!!!!!!!!!!!!!!!!!!!!
Hi,
I have had the same problem. These is just one solution. Send it back to T-mobile. There is no way you can repair it yourself
greets
Hi all,
i had recently upgraded the WM6 on my MDA compact 3. everything was good however, i could not able to get the TOMTOM 6 working.
does anyone had experience on this? and got TOMTOM working? if do, which version and where to download?
or if the worst case. please someone help to tell me how i can go back to T-mobile ROM?
many thanks to all
Hi!
I have installed the O2 WM6 Rom on my MDAcIII. The TomTom build in the ROM works for me! I only copied my Card to the SD and registered it, thats all!
Greets
KobiP
hi KobiP,
thanks for reply. which and where do you get the rom build in TOMTOM? can you suggest the link please?
thanks
OK, I have first CID-Unlocked my MDAcIII, then I have installed the WM6 Update of O2 Germany.
http://www.o2online.de/nw/support/downloads/software/xda/xdaorbit/index.html
After the Update, the branding and TomTom gets installed.
hey KobiP
listen mate - just got me a MDA compact III on t-mobile.
I have tried Lowitz utlity - no joy their !!!
There is someone who says they can unlock the SIM but not CID .
I really would like to use my Orange pay montly contract SIM but its SIMlocked - I am tempted to get it unlocked via IMEI-unlock.co.uk
Any advice how u unlocked your - cheers !!!
peace
tli
tli said:
listen mate - just got me a MDA compact III on t-mobile.
I have tried Lowitz utlity - no joy their !!!
There is someone who says they can unlock the SIM but not CID .
I really would like to use my Orange pay montly contract SIM but its SIMlocked - I am tempted to get it unlocked via IMEI-unlock.co.uk
Any advice how u unlocked your - cheers !!!
peace
tli
Click to expand...
Click to collapse
Sorry, I don't understand what you mean. CID Unlock means that you can Install other ROMS on your Phone, SIM-Unlock means that you can use no other SIM-Card. The MDAcIII is NetLocked, so you can use just T-Mobile cards.
If that wasn't your question, please ask again
Hi,
I'm reading this forum for a while and finally decided to register and ask a few questions. I read a lot already but cant connect it all together...
all regards to Artemis flash.
I want to flash UK T-Mobile MDA compact III with newest available unbranded soft, want to unlock it to use it with other networks and hopefully get win mobile 6.1 or at least other language.
Would someone be so kind and guide me to some tutorials or instructions or at least point me in the right direction of what to look for, what software to use, etc. i would be most grateful.
I'm not looking for anyone who will do it for me, i want to learn how to do it so when my MDA compact IV finally arrives in next few months I will be able to un-brand it and hopefully unlock.
Many thanks in advance
k-zu said:
Hi,
I'm reading this forum for a while and finally decided to register and ask a few questions. I read a lot already but cant connect it all together...
all regards to Artemis flash.
I want to flash UK T-Mobile MDA compact III with newest available unbranded soft, want to unlock it to use it with other networks and hopefully get win mobile 6.1 or at least other language.
Would someone be so kind and guide me to some tutorials or instructions or at least point me in the right direction of what to look for, what software to use, etc. i would be most grateful.
I'm not looking for anyone who will do it for me, i want to learn how to do it so when my MDA compact IV finally arrives in next few months I will be able to un-brand it and hopefully unlock.
Many thanks in advance
Click to expand...
Click to collapse
May be following will help:
http://pocketpc-live.com/pocket-pc/upgrading-pocket-pc-rom.html
Hi folks!
Sorry - I am a complete novice to ROM upgrades etc...
I have an MDA Touch Plus Mobile with T-Mobile, running Windows Mobile 6.0.
I want to upgrade to WM 6.1 or 6.5, however the HTC website suggest that my phone (via S/N number) is not valid for the 6.1 upgrade...
T-Mobile support is worse than pathetic and offer no advice at all...
Can anyone suggest if it's possible to get the upgrade for my phone and how I would go about it...?
( Remember I'm a novice to Rom upgrades!)
P.S.
Many thanks and aplogies to those guru's out there who have gone through this issue a million times with folk like me...
- As a Db Progress developer I can relate - Give me a Progress DB and I'm happy, give me a car with a broken Altenator and I pass....
Cheers
Ron
First install the Hard SPL boot loader, after that install a custom rom with wether wm6.1 or wm6.5.
Take a deep look http://forum.xda-developers.com/forumdisplay.php?f=404 here.
Everything you need can be found THERE.
Check out the HardSPL thread and then start reading about custom roms.
If you have any questions : read again. If you still have any questions : read again...
regards
Hi, I was wondering if someone could help me out with detailed instructions.
I am faily new to the world of PDA's and smart phones.
I just bought HTC touch Pro 2 from Telstra. Its all customised with Telstra/Bigpond.
My question is how can I remove Telstra customisation completely from the phone?
FYI,
Device Information.
Rom Version: 1019.841.3 (51489) WWE
Rom Date: 06/04/2009
Radio Version: 3.44.25.27
Windows 6.1
Your help would be highly appreciated. Also, could you please provide complete steps for the solution you provide.
Thanks for your help
Nothing much you can do. You can flash a custom ROM if you want to totally remove Telstra stuff.
Having said that there are some good stuff in Telstra ROM. Free web browsing to certain sites (BigPond, Sensis, Yellow Pages, Trading Post, etc.....) And there are free apps like WhereIs where the data download is not counted towards your usage. And there are 2 free apps Jetcet Print and Jetcet Presenter. The former for printing directly from phone and the latter for creating/editing Powerpoint slides.
But if you don't want any of these, you can always flash a custom ROM of your choice.
Yep just flash a custom rom simple
If you don't mind me asking, did you buy the phone outright or on a plan?
If outright, how much did you pay?
i'd like to get rid of the the telstra things too
phrak, i just bought mine yesterday at harvey norman, it was $1479 outright and with extended warranty (ex wty was 99)
pinkdiamonds said:
i'd like to get rid of the the telstra things too
phrak, i just bought mine yesterday at harvey norman, it was $1479 outright and with extended warranty (ex wty was 99)
Click to expand...
Click to collapse
Well you can always flash a cooked ROM if you like. I haven't yet as I'm quite happy with the Telstra ROM. I don't like the purple color theme so I installed another theme. I am quite happy with what I have got so far. Would wait for Telstra WM6.5 upgrade and see if it is any good.
You can manually remove Telstra items by editing registry
Check this forum.
http://forums.whirlpool.net.au/forum-replies-archive.cfm/1286616.html
Hi Guys
anyone know how i can get back my Original Telstra rom !
thanks
Touch Pro 2 Sprint on NextG
Hi I just got a Touch Pro 2 Sprint CDMA GSM version from the USA. I know you'd probably wonder why but because it has the inbuilt 3.5mm headphone jack. I unlocked everything on the phone and changed the radio to the 2.05.00WU (USCC test edited) version, changed the ROM to try the 6.5.3 energy rom. I know the phone supports CDMA 850. But aren't sure if it's now possible to get it to work on NextG.
Is anyone able to confirm if it's possible? I think it runs on the CDMA2000 1X 1900/800 band. And from what I've been reading it mightn't support the 2100 band, so mightn't be able to get it to work at all.
I'd like one with the headphone jack but like the keyboard also. Don't really want a Touch HD2 thought they would be alright with the 1Ghz CPU.
My problem is the Telstra Next g version is a Rhod110, not Rhod100. This means that when attempting to put Hard SPL on my brand new toy it comes up with a "fatal error"... No way am I gonna try putting a new rom on without Hard SPL... Soft SPL just freezes the whole thing and the only fix is to pull the battery...
Its also a different series from the other touch pro 2 available, 7381, not 7373...
Guess I'm stuck with the bloated stock rom until Telstra releases a wm6.5 rom or a new Hard SPL or Soft SPL are conjured up....
Downloaded the file enablerapinew.cab, able to flash Hard SPL... SWEET....
I have the same problem !
Hi there, it sounds like Im in the same boat as you are or were... I also have a RHOD110 from Telstra but I want to upgrade it to win 6.5 and I'm just not sure which ROM will be applicable a) for this model or b) for the Australia service (3g)
I wonder did you manage to get this sorted out and would you be kind enough to give me any info that may help from your own experence ?
Thanks in advance !
I have the same problem ! HELP NEEDED
ultramag69 said:
My problem is the Telstra Next g version is a Rhod110, not Rhod100. This means that when attempting to put Hard SPL on my brand new toy it comes up with a "fatal error"... No way am I gonna try putting a new rom on without Hard SPL... Soft SPL just freezes the whole thing and the only fix is to pull the battery...
Its also a different series from the other touch pro 2 available, 7381, not 7373...
Guess I'm stuck with the bloated stock rom until Telstra releases a wm6.5 rom or a new Hard SPL or Soft SPL are conjured up....
Downloaded the file enablerapinew.cab, able to flash Hard SPL... SWEET....
Click to expand...
Click to collapse
I have the same problem !
Hi there, it sounds like Im in the same boat as you are or were... I also have a RHOD110 from Telstra but I want to upgrade it to win 6.5 and I'm just not sure which ROM will be applicable a) for this model or b) for the Australia service (3g)
I wonder did you manage to get this sorted out and would you be kind enough to give me any info that may help from your own experence ?
Thanks in advance !
ultramag69 said:
My problem is the Telstra Next g version is a Rhod110, not Rhod100. This means that when attempting to put Hard SPL on my brand new toy it comes up with a "fatal error"... No way am I gonna try putting a new rom on without Hard SPL... Soft SPL just freezes the whole thing and the only fix is to pull the battery...
Its also a different series from the other touch pro 2 available, 7381, not 7373...
Guess I'm stuck with the bloated stock rom until Telstra releases a wm6.5 rom or a new Hard SPL or Soft SPL are conjured up....
Downloaded the file enablerapinew.cab, able to flash Hard SPL... SWEET....
Click to expand...
Click to collapse
Hi there, I'm kinda new at all this as well and I'm in the same boat as you are or were. I also have a Telstra RHOD110 and I want to upgrade to win 6.5, however, Im just not sure about a) which rom upgrade will work on the 110 or b) which one will be compatable with Australian 3G services ?
ANY help or assistance in this area will be greatfully appreciated !
Thanks in Advance
Download & install enablerpinew.cab. You should then be able to Hard SPL.. I also have Rhod110 from Telstra.
Next G works fine, its a hardware feature so it will always pick up Next G, but you may need to get the GPRS settings from Telstra and manually input them.
Use Manual Hard SPL if auto doesn't work, just need to install enablerpinew.cab 1st, and only once... After that any rom works finre...
Cheers...
ultramag69 said:
Download & install enablerpinew.cab. You should then be able to Hard SPL.. I also have Rhod110 from Telstra.
Next G works fine, its a hardware feature so it will always pick up Next G, but you may need to get the GPRS settings from Telstra and manually input them.
Use Manual Hard SPL if auto doesn't work, just need to install enablerpinew.cab 1st, and only once... After that any rom works finre...
Cheers...
Click to expand...
Click to collapse
I have an import RHOD100 that I bought SH. I have Flashed it with both the Aus Telstra Roms and neither seems to access 3G signal. Does this mean the phone physically cant or is there something else I can do???
FYI it actually gets better coverage than my Snap did and that was a telsta phone. But I dont know what the coverage will be like further out of town.
Im running:
1.86.710.3 WWE Rom
4.49.25.17
RHOD100
T7373
i myself want an RHOD110 because of the fact it is the AU model :/