How do I set the phone to always have XT9 active?
I know how to activate it temporarily: FN + Space > XT9 Svenska.
But every time the phone goes off I have to do it all over again (the setting with ABC is activated when the lighting has gone off).
I´ve tried all possible things but...
And I did search the forum for: XT9 and ABC but no matches on either or both.
//D
Anybody knows?
Danne said:
How do I set the phone to always have XT9 active?
I know how to activate it temporarily: FN + Space > XT9 Svenska.
But every time the phone goes off I have to do it all over again (the setting with ABC is activated when the lighting has gone off).
I´ve tried all possible things but...
And I did search the forum for: XT9 and ABC but no matches on either or both.
//D
Click to expand...
Click to collapse
This is an old topic with no solution. If you searched the forums, you would have seen this:
http://forum.xda-developers.com/showthread.php?t=540252
Thanks, then I know.
(I did search, try the specified words yourself)
Related
This has been slowly annoying the hell outta me. I noticed theres no indicator showing that you are using caps, symbols, or shift. It messes up my typing alot. Is there anyway to get some soft of indicator that one of them is on?
does anyone know? Is there some sort of hack maybe?
I would love this as well!
do search a little guys :wink:
u can find most of the answer by searchin the forum
example: write "caps AND hack OR tweak" in search field
U can do it, I believe :wink:
I did exactly as you suggested and found this post
http://forum.xda-developers.com/viewtopic.php?t=53784
In the middle of the post it shows a registry tweak for the Wizard for caps and shift indicator on the screen. However, it did not work for me. I still see no indicator. Maybe it doesnt work on Blue Angels? Can anyone verify?
I have searched and only found hacks for winmo 5 devices.
They don't work on PPC2003.
I have searched and only found hacks for winmo 5 devices.
They don't work on PPC2003.
bumping this thread to see if I can get any answers...
Are you using PPC2003?
I just tried the tweak with WM5. Doesnt work...
This would require a hardware solution I believe (ie. one that interfaces with the HTC keyboard driver for the Blue Angel).
Consider the following tests:
1) Open a Word/Text editor
2) Using the standard soft keyboard (SIP), type a character in lowercase, eg. 'a' -> "a" appears
3) Press SHIFT on the SIP, then press 'a'. -> "A" appears
4) Press SHIFT on the SIP, then press 'a' on the Blue Angel Hardware keyboard (HWKbd) -> "A" appears
5) Press SHIFT on the HWKbd (SIP then dissapears - reactivate it), then press 'a' on the SIP -> "a" appears ---- note that the HWKbd's SHIFT didn't modify what occurred on the SIP
6) Now press 'a' on the HWKbd -> "A" appears. This indicates that the "SHIFT"/"CTRL" functionality is limited to the hardware keyboard itself.
The same applies to the CAPS Lock on the HWKbd. If you turn on CAPS, caps only works for keys input from the HWKbd, not from the SIP (try it: on the HWKbd, press 'Fn', then ''Shift/Cap". Keys input from HWKbd are UPPERCASE, and from the SIP lowercase.
Any solution to this will require development of some sort of driver/interface with the Blue Angel's hardware itself.
Any takers...?
My on-screen keyboard is only displaying numbers, with no option to switch to qwerty. The only qwerty characters available are "p" and "w", which appear to the top right of the keyboard.
Does anyone have any idea how I can get the normal qwerty keyboard back??
itm said:
My on-screen keyboard is only displaying numbers, with no option to switch to qwerty. The only qwerty characters available are "p" and "w", which appear to the top right of the keyboard.
Does anyone have any idea how I can get the normal qwerty keyboard back??
Click to expand...
Click to collapse
Did you disable eT9 and to get Auto suggest and auto complete back? If so that is probably what did it.
I had the same problem when I hacked my Tilt 2 to get get auto suggest and auto complete back. Apparently when you do this it works fine until the fallowing happens:
A. You get to a field that triggers you keyboard to switch number entry mode (Nummber pad with P and W)
b. You get to a field that trigger the keyboard to internet entry mode (Keyboard with ".com" and "/" but no spacebar).
Once you enter either mode you can't key you regular keyboard back.
If that is what happened to you, your not the only one.
http://forum.xda-developers.com/showthread.php?t=526857&highlight=Auto+suggest
I haven;t found a way to make it work without breaking the keyboard. I had to do a clear storage and learn to use T9. It better than a broken keyboard.
Yes that's what I did. If I have auto-suggest but NOT auto-complete on do you know if this will avoid the problem??
itm said:
Yes that's what I did. If I have auto-suggest but NOT auto-complete on do you know if this will avoid the problem??
Click to expand...
Click to collapse
I'm not really sure. I tried several ways and nothing worked, my guess is your are likely to still have an issue. BTW going back an changeing the registry edits back did not fix the issues for me. I had to clear storage and start from scratch each time.
For now I'm learning to live with XT9. I don't like it as much as the original, but it is usable. The alternative is using MS tiny little SW keyboard, and to me, that is even worse.
Now if someone could figure out how to keep the alternate keyboards from popping up, in theory, that should remedy the issue. Unfortunately, I have no such skill.
RojasTKD said:
Did you disable eT9 and to get Auto suggest and auto complete back? If so that is probably what did it.
I had the same problem when I hacked my Tilt 2 to get get auto suggest and auto complete back. Apparently when you do this it works fine until the fallowing happens:
A. You get to a field that triggers you keyboard to switch number entry mode (Nummber pad with P and W)
b. You get to a field that trigger the keyboard to internet entry mode (Keyboard with ".com" and "/" but no spacebar).
Once you enter either mode you can't key you regular keyboard back.
If that is what happened to you, your not the only one.
http://forum.xda-developers.com/showthread.php?t=526857&highlight=Auto+suggest
I haven;t found a way to make it work without breaking the keyboard. I had to do a clear storage and learn to use T9. It better than a broken keyboard.
Click to expand...
Click to collapse
Try this to fix it: start Opera, tap the url field, which will bring up the "search the web" field. Then tap the "search the web" field. This should fix your keyboard (at least it works for me), at least until the next time something triggers the keyboard problem.
levman said:
Try this to fix it: start Opera, tap the url field, which will bring up the "search the web" field. Then tap the "search the web" field. This should fix your keyboard (at least it works for me), at least until the next time something triggers the keyboard problem.
Click to expand...
Click to collapse
Thanks for the input, good to know.
That may be a work around for the Internet input issue (maybe), but we still have the issue with the numeric input Keyboard. Thus far the best option, at least for me, is to live with XT9 until a terminate fix is found.
On the bright side, over all I love my TP2/Tilt2!
RojasTKD said:
Thanks for the input, good to know.
That may be a work around for the Internet input issue (maybe), but we still have the issue with the numeric input Keyboard. Thus far the best option, at least for me, is to live with XT9 until a terminate fix is found.
On the bright side, over all I love my TP2/Tilt2!
Click to expand...
Click to collapse
Actually, this works for the numeric input keyboard issue as well - I have experienced this first hand. addmittedly, it is a bit of a pain to switch from whatever you happen to be doing, to opera, just to fix your keyboard.
Hi,
I have a Tilt 2 with stock ROM. The only two enhancements I use is "S2U2" and "Advanced Configuration Tool" ! I changed someting and now have a little problem :
When I get an incoming call and the caller id with the pic pops up, I can't pickup the call, using the green on-sceen button. This button does NOT pickup the phone call. I have to use the green hardware button to pickup the incoming call. However, I can use the RED on-screen button to end the call.
I soft reset the phone a few times and tried some settings with the "S2U2 and Advanced Config. Tool", but I can't get it to work.
Any ideas ?
I'd appreciate any help and suggestions.
Thanks,
JCE
same thing is happening to me, neither the onscreen slide, or the hard button work..
can't wait for an answer -_-
i lurk this forum here and there, and i still don't understand anything...at all -_-
jerzey_devil said:
same thing is happening to me, neither the onscreen slide, or the hard button work..
can't wait for an answer -_-
i lurk this forum here and there, and i still don't understand anything...at all -_-
Click to expand...
Click to collapse
Haha, it takes time to understand all the jargon and such that takes place around here. Just do some reading and searching, don't be afraid to ask questions if you can't find a thread explaining it. Eventually I would suggest flashing to a good rom like one of the Energy Rom's or a Cell Rom. The two best Rom Cooks on the Rhodium (Touch Pro 2/Tilt 2) side of xda.
I say the same thing as doublen1, use a non-stock ROM because these come with features already installed and you will be able to use S2U2 and all that stuff. and about the actual issue, I have had problems picking up calls with the screen, so I just started using the hardware keys.
Make sure you didn't mess around with any of the touch screen settings in Adv. Configr or BSB tweaks or something like that. This usually causes the problem with the dialer.
Hi AllTheWay,
well, I don't remember changing anything in the "Advanced Config. Tools" which would cause the touch screen settings to be different. However, I might have done or changed something...... Is there a way to get the "Touch Screen" settings to a default level without hard resetting the device ?
Thank you.
JCE
jce2005 said:
Hi AllTheWay,
well, I don't remember changing anything in the "Advanced Config. Tools" which would cause the touch screen settings to be different. However, I might have done or changed something...... Is there a way to get the "Touch Screen" settings to a default level without hard resetting the device ?
Thank you.
JCE
Click to expand...
Click to collapse
Not that I know of off the top of my head. There might be a setting inside of Adv Config that would allow you to restore to default. Also the S2U2 has a setting to take control as the dialer screen when somebody calls. You can try messing around with the settings in S2U2 as well.
PM me if you don't find an answer soon.
I noticed there's no Word Completion when typing text, notes, word Docs etc...
anyone know where I can turn this on? or if it is/is-not an option?
I found some Options under Start>Settings>Personal>Input>Option (Under Touch input), for: XT9 Settings.... no clue what that is...it does have boxes to check Spell Correction, Word Completion in XT9 mode, Word Completion in ABC mode (For Phone Keypad only), and Auto-Substitution...but Word Completion still doesn't work.
Thanks
Figured it out...you have to change the ABC ---> to "XT9" on the soft keyboard, then it works for both the soft and hard keyboard.
Ah, answered my question. I had adjusted the option, but still couldn't figure out why it wouldn't work. Now I know!!!!!
aspromalee said:
Ah, answered my question. I had adjusted the option, but still couldn't figure out why it wouldn't work. Now I know!!!!!
Click to expand...
Click to collapse
You can also do it on the hard keyboard by pressing ---> FN then "UP" directional key...which has the XT9 key ;D
took me awhile to get this haha
i couldn't find a definitive answer for this, so I'm throwing my question out there:
I just moved to Starburst 1.3.3.4 from LeeDroid 2.3d, and now I find that Starburst, despite having Chinese language support, lacks the Chinese toggle that the stock HTC keyboard had (w/ LeeDroid had too).
Does anyone know how to put in the Chi language toggle? I've tried downloading Google's IME, and although it installed, nothing changed.
You have to change the input since you installed a new keyboard. Open up the keyboard in sms or something and in a text field, right click, well press down for few seconds and menu will pop up, select input method and change it.
Accidental discovery of solution
Meaple said:
You have to change the input since you installed a new keyboard. Open up the keyboard in sms or something and in a text field, right click, well press down for few seconds and menu will pop up, select input method and change it.
Click to expand...
Click to collapse
Yep, stumbled onto this solution when my finger strayed a second too long into the SMS text box. Whaddaya know, voila! --input method came up, and the keyboard with Google IME I installed showed up.
Thanks anyway, appreciate your dropping by to assist.