iPAQ HX2750+TOM TOM 7 installation Issues - Windows Mobile Software Development

Hello All!
I'm trying to get TOM TOM 7 to run on my iAQ HX2750. By all accounts my device should be compatable (But don't ask TOM TOM TECH support - they'll say no...)
At first attempt I was running Win CE 4.21 OS but when I inserted the MicroSD into the iPAQ SD slot window popped up displaying the message: "Your device is not compatible with this version of TOM TOM Navigator".
I then upgraded the OS to WM6.5_V4 (Spaaitjie) in the hope that that would solve the problem but the same message pops up...Now I'm at a loss
Does anyone have experience with this and advice to offer?
Many Thanks!
DA

Dominus_Alchemi said:
Hello All!
I'm trying to get TOM TOM 7 to run on my iAQ HX2750. By all accounts my device should be compatable (But don't ask TOM TOM TECH support - they'll say no...)
At first attempt I was running Win CE 4.21 OS but when I inserted the MicroSD into the iPAQ SD slot window popped up displaying the message: "Your device is not compatible with this version of TOM TOM Navigator".
I then upgraded the OS to WM6.5_V4 (Spaaitjie) in the hope that that would solve the problem but the same message pops up...Now I'm at a loss
Does anyone have experience with this and advice to offer?
Many Thanks!
DA
Click to expand...
Click to collapse
Hi,
It's got nothing (much) to do with the OS, TT7 checks what hardware you're running and then decides it's not enough...
Dirk

Related

Windows CE to Windows Mobile 2003

Dear friends,
I need help to upgrade my Medion which has built in Windows CE to Windows Mobile 2003, is that possible?
How? Where to get the software?
I will remain to hear from u all.
Thanx
the king said:
Dear friends,
I need help to upgrade my Medion which has built in Windows CE to Windows Mobile 2003, is that possible?
How? Where to get the software?
I will remain to hear from u all.
Thanx
Click to expand...
Click to collapse
Hi there,
It is along time I wrote this but no one has answered.
Is that means there is no answer or what?
With my deep thanx
It's unlikely without an original ROM update by the manufacturer.
However, what model etc is it? Do you have a webpage we can look at to get info about it.
V
It is like this one
Hi there,
In this website u can c what my Medion it look like.
https://www.medionshop.co.uk/?areaI...000000A00004A410A4F713EAE6B87E10000000A00004B
It runs Windows CE net 4.2 .
With my deep thanx
The King - the website you point to indicates it's running
"Microsoft Windows Mobile(TM) 2003".
Are you sure it's running .net? Could you post a screenshot?
As I said before, it's unlikely to be upgradeable without a full rom update from Medion - my father has a medion GPS PDA, and that's running WM2003. Maybe you could grab a rom from another wm2003 Medion and try patching it together, but unlikely!
V
SORRY this is the one !!!!!!!!!!!!
Hi there,
I am so sory, this is the one which I have:
https://www.medionshop.co.uk/?areaI...000000A00004A410A4F713EAE6B87E10000000A00004B
Please if u have any idea or inforamtion how to upgrade it so let me know it.
With my deep thanx,
the king
the king: I might be missing something, but that points to the same device I think. Still says WM2003.
V
Dear friend,
Try this link, PLZ.
https://www.medionshop.co.uk/?areaI...000000A00004A410A4F713EAE6B87E10000000A00004B
try to get down untill u c this: Product No. 30003183
that is my Pocket PC.
Full GPS Navigation System
Satellite Based Positioning (GPS)
Integrated GPS receiver
SD/MMC card reader
Windows® CE 4.2 (based)
With my deep thanx
all the links show that it's already running 2003
windows CE is just the core OS that WM2003 and 2005 and ... is build on
Windows CE 4.2
What I am talking about has these specifications:
Full GPS Navigation System
Satellite Based Positioning (GPS)
Integrated GPS receiver
SD/MMC card reader
Windows® CE 4.2 (based)
With my deep thanx
:lol:

HP IPaq hx2750 WM5 -> WM6... Success!

Hello all...
I've seen LOADS of questions relating to this particular model and upgrading to WM6, both on this forum and throughout the web.
I followed instructions from here, but alas I couldn't get the PDA to accept the new ROMs for various reasons. (I.e. ROM Sink Mismatch, Incorrect Model, Incorrect Version).
I then found this page burried in the links of the above thread, and tried the WM6 upgrade from it... I don't know if it's the PDA4 or the PDAViet ROM (or another altogether), but the big thing is: it works! Bluetooth, WiFi, Battery Indicator, Activsync... everything I can find to test works.
Now... I had originally got Windows Pocket PC 2003 with the device... I upgraded to WM5 using the official "WM5 Upgrade" from the HP UK website... I updated the firmware and drivers for WM5 from the same site, then I applied the WM6 ROM from the link above in White Boot loader mode.
One quick restart later, and now it's working...
So, thanks to all from the massive thread, thanks to the person who made that site, and thanks to whoever made the ROM
Loq
HX2750, WM6.5 Bluetooth Radio Problems
Hello,
I've installed Spaaitjies WM6.5 V4, and trying to run TOM TOM 7 on my iPAQ HX2750, I find that the Bluetooth Radio cannot be turned on. The error message that pops up reads:
"The Bluetooth Radio failed to turn ON due to insufficient driver memory available. You must perform a normal rest before you can turn ON the Bluetooth Radio"
So, naturally I've reset the device (soft & hard) but the issue remains. Can anyone advise what I might try next?
Many Thanks,
Gareth

Tom Tom 6 Activation after ROM update

Hi,
Firstly if this is in the wrong forum - appologies.
I have TomTom 6 and maps which I originally installed on my iPaq 4700, which has now died due to the touchscreen failing. Recently purchased a Wizard (from a popular auction site) and installed TT6 and maps no problem.
With my purchase was another supposedly dead wizard which I have manged to reflash with WM6 ROM and all is working fine (thanks to all the invaluable advise in the Wizard/WM6 forums!) which I now want to install TT6 on and uninstall from the other Wizard with a view to selling it.
The problem - TTcode website will not accept another device code so cannot activate maps. Spoken to TT who want everying including my inside leg measurement to activate (which I can understand however i have little chance of finding the original receipt).
Does anyone know how the device code is forumlated - ie If i flash the vanilla Wizard to WM6 will it change the device code?
Any help appreciated.
Thx
PS my version of TT6 is totally original - no hacks copies or dodgy downloads.

TOSHIBA g810 - Wm6.5 5.2.21234 wwe from portegeclub!

Good news!!
Toshiba g810
link:
http://www.portegeclub.com/forum/viewtopic.php?t=2097
test please!!!!!!
Flashing done!
VERY VERY GOOD!
Full Toshiba G810 rom original!!!!
Works great, all function like 6.1 but more!
I'm testing now.....
I write other comment when possible.
Bye.
Anyone else tried it yet?
Anyone else tried this WM6.5 ROM on the Toshiba G810 yet?
Do you have the detail instructions how to upgrade using this ROM? (Am abit concern might brick my TG810.)
Thanks.
I found 2 problem on this rom:
1 SMS not work, not receive no send.......
2 Sound of event (sms, mms, beep error etc....) no work properly...
Other function work fine (wifi, gps .....)
Pocket Explorer works fine, very good e pretty!
bye....
Fixed ROM 6.5 for G810
Dear people, here is the link for windows mobile 6.5 ROM for toshiba portege g810 (Official possible). Or you may check back at portegeclub.
Link 1 (Fixed SMS/MMS problem).
http://www.mediafire.com/download.php?znn1imz21g2
or
http://www.mediafire.com/download.php?eiewrm3wyjo
______________________________________________
How to update:
Note. The ROM update utility requires Active sync 4.5 from microsoft. Please update ROM from windows XP (any, x64 or x86), update failed from my Windows 7 (x64), however I had to hard reset my device to perform Rom upodate. I updated my ROM for my Portege 810 (UK) successfully to Windows mobile 6.5, and this one is complete with english language. It updates like official ROM update utility package. Tested it and and worked fine, no problems at all.
Update instructions can be found here:
http://www.toshiba.co.jp/product/etsg/cmt/english/asian/dl/Update Instruction.pdf
Hope you do this quickly, as this this had been much awaited.
Hi
Tried to update, everything goes right until first reboot, then Vista is asking for drivers and installing them...
In the meantime, the update utility reports that the connexion has failed.
From there, black screen, cannot finish the update, the device is not recognized anymore by the PC and I cannot find any way to force recovery.
Any clue?
I have the same trouble
Is there a way as for the Touch cruise to put the phone in recovery mode (camera button + reset for the polaris) or something like that?
G810 Wm6.5
Been working fantastic for 5 day, Windows Mobile 6.5 is a vast improvement, switched off for a flight and urned phone back on the Touchscreen is not working, works to allow Hard Reset but not to use functions in Windows Mobile, anyone had similar problem or solution ??
geo.adams said:
Hi
Tried to update, everything goes right until first reboot, then Vista is asking for drivers and installing them...
In the meantime, the update utility reports that the connexion has failed.
From there, black screen, cannot finish the update, the device is not recognized anymore by the PC and I cannot find any way to force recovery.
Any clue?
Click to expand...
Click to collapse
Look like similar problem with me.. My Toshiba Protege G810 die (Brick) after following this risky steps.. Contact Toshiba Service Centre here in Malaysia, they said due to that problem, I need totally change the Motherboard which is cost same as new unit.
Conclusion, is there any solution to UNBrick and give 2nd life for the Toshiba Protege G810 ? If not probably I gonna throw it into the Trash Bin..

[HELP!!] Dell axim x50 rom update.

Hi all,
My problem is, i have a dell axim x50 and i have bought and GPS sd card receiver.
And i install tom tom navigator, but every time he loose all battery, he losses everything installed on him, every config and anything.
I already have tried to update him, but when i run SD Card loader it don't find any update on the sd card, i already have tried a lot of roms, and it never found anyone...
my rom version is window mobile 2003 SE v4.21.1088
can please someone help me??
thanks a lot
Did you see my guide on Aximsite? It should answer all your questions.
No, can you please send me the link?
cheers
No, can you please send me the link?
cheers

Categories

Resources