Develop Bugs

does 1.93.707.1 requires any hard SPL?

I'm trying to switch from 1.37.207.2 to 1.93.707.1... but it gives error after 1 %. Do I also need to flash SPL as in the case for cooked ROMs?

No answer for me?

Have u flash hardspl in to your device? propebly you must do that if you want the 1.93 rom

Actually I have done nothing on my phone up to now... It was stock SPL which was 1.37... you think I need an unsigned SPL? but 1.93 is also original ROM from HTC... I am confused...

ofcoure you can flash this but since it stuck on 1% it can be that the CID in your phone and the 1.93 rom dont match. So u must hardSPL
In general you only can flash the rom you download from HTC e-club without hardspl.

Thanks bro...

HELP on 1.93 ROM
HI i am new to HTC and i have ROM version 1.37. I installed the hardspl unsigned olinex 1.37. now pls can anyone give me the ROM 1.93 to download and how shall i do it? i downloaded several ROms but i cant seem to know how to start it :/

1.93 spl please help

hello i follow up every steps at the forum to unlock my slp but no way my device is
diamond slp v 1.93 plrase please help
i cant speak german and i have to change the rom
thanks for every one

Flash http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705 from http://forum.xda-developers.com/showthread.php?t=400950, then flash what ever ROM you desire. Be sure that your diamond is a GSM-model, not a CDMA-model.

what's the difference this this one TomInMB? RUU_Signed_1_93OliNex_HSPL_UnsignedEdition i have also 1.93 so what's the diff?

The "signed" SPL means that you can only flash "signed" ROMs (they are "approved", so to speak). The unsigned SPL allows you to flash any ROM for the diamond. I'm not sure if there are any other differences, as I have not used the "signed" SPL.

thank you TomInMB

Stock spl 2.03

Hi to all, I'm looking for original stock spl 2.03 for warranty reason (I upgraded my diamond with official 2.03 ita rom), where I can find it?
Thank you.

diego1810 said:
Hi to all, I'm looking for original stock spl 2.03 for warranty reason (I upgraded my diamond with official 2.03 ita rom), where I can find it?
Thank you.
Click to expand...
Click to collapse
find stock 1.93 spl. install it
than reinstall 203 rom the 203 spl should install with the rom

spl 2.03 doesn't exist ...
in 2.03 package there are rom and radio
after installation 1.40 OliNex remains

dome.diamond said:
spl 2.03 doesn't exist ...
in 2.03 package there are rom and radio
after installation 1.40 OliNex remains
Click to expand...
Click to collapse
Only If you install 2.03 in a diamond with original spl and rom (1.93 es.) it install spl 2.03

hi guys,
I arrived here bouncing...
I m trying to update my Movistar (spain) ROM 1.93.621.2 RADIO 1.00.25.05 G 52.29.25.12W (spl 1.93.0000)
but I have no idea on how to do it. I m trying to get the "last" SPL cause mine is already 1.93
But i haven t found a valid link.
Would you mind giving me the valid links to a 1.93 signed (by olinex) HardSPL or better to a 2.03 signed (by Olinex) HardSPL, and then another link or a zip file for the 2.03 ROM? Just can t find it anywhere. (no valid links anymore)
If I get well what you said here, I should:
1/ install HARD SPL 1.93 (where can I get it? is it the one from Olinex? 1.40 is not 1.93). Is my 1.93 stock SPL valid for this?
2/ get a ROM 2.03 package taht will come with ROM and RADIO (and SPL 2.03?)

http://forum.xda-developers.com/showthread.php?t=471699
Here are the latest official ROMs.
Still, I don t know if I have to go for a Olinex 1.40 HARDSPL or for a 1.93 SPL signed by Olinex (can t find it!!!)...
Please heeeelp me in this!
I already backed up the device (though haven t dumped the ROM) with SPB.
But don t dare touching the 1.93 SPL.
Olinex 1.40 SPL is older than 1.93 ?
With 1.40 SPL can I just flash the 2.03 ROM? (i think so with what I ve been reading) Or do I need the most recent SPL?

iorga1 said:
http://forum.xda-developers.com/showthread.php?t=471699
Here are the latest official ROMs.
Still, I don t know if I have to go for a Olinex 1.40 HARDSPL or for a 1.93 SPL signed by Olinex (can t find it!!!)...
Please heeeelp me in this!
I already backed up the device (though haven t dumped the ROM) with SPB.
But don t dare touching the 1.93 SPL.
Olinex 1.40 SPL is older than 1.93 ?
With 1.40 SPL can I just flash the 2.03 ROM? (i think so with what I ve been reading) Or do I need the most recent SPL?
Click to expand...
Click to collapse
So far I know, there is no signed 1.93 SPL. Different versions of SPL (signed and unsigned) can be found here: http://forum.xda-developers.com/showthread.php?t=415191.
More info on SPL can be found here: http://wiki.xda-developers.com/index.php?pagename=SPL%20Questions%3F
I use the 1.93 and have no problems at all with 1.93, 2.00 and 2.03 ROM's.
I did not test it, but there are a lot of people with 1.40 SPL using all kinds of ROM's with no problems at all.
You can use what you want, it will work OK ...

Great!
Thanks a lot!
a couple of things:
- my model ID is DIAM300... will this be a problem? (I haven t found anything really clear on this in the forums)
- yesterday, using the pen, as everyday, sliding some pics, i striped? scratched the screen!!!
I noticed the pen was a bit sharp but it was too late. There s a bad scratch on the screen. Have you ever heard about this? Any feedback? It is wearing a small transparent plastic protection (shipped with the phone) but it indeed scratch my screen. As it was "normal use", "normal conditions", and the pen was not /is not damaged, I can t beleive it.
Should I worry?

Which Hard SPL version use for SPL1.93.0000?

Hello everyone
I read all sticky postes in this forum, it's very usefull for me but i have still sonme questions.
I just bought my diamond with SFR bundle (a french tele operator) and i got following infomation in 3 colors screen:
DIAM 100 64M
SPL_1.93.00000
MicroP_Diam(LED) V11
PSOL_Diam STAGE_PVT v0x32
In the bible, it suggest "Hard-SPL 1.40 Olinex SIGNED" and in another post it suggest Hard-SPL 1.93
In my case which version is the better one?
the second question would be if i have any fatal errors during SPL installation, it is possible to return the original SPL?
sorry for my english
thx in advence

As long as it works, it doesn't really matter which one you use was the original instructions from the thread.
I personally like Hard-SPL 1.93 and since your device is already 1.93 SPL....then just use that one.

My Diamond came with the 1.93 SPL too. I'm using the HardSPL 1.93 Unsigned solely on the fact that it is the latest version of the SPL, meaning quicker booting, and maybe other small tweaks.
I'm really unsure why so many people use the 1.40 as it's dated compared to the 1.93 isnt it.

I have a similar question,
I have 2.03 ROM with stock 2.03 SPL, what would be my best choice?
I think i've read somewhere somebody had problems with installing Hard-SPL on 2.03 rom and replacing 2.03 spl?
Cheers.

thank you for responses
I'am still searching which would be the best conbination, there is to much choice....

I Can't Flashing SPL 2.4 Olipro (Thanks XDA i Can Now ) :)

I Can't Flashing SPL 2.4 Olipro
HTC TyTN Herm 200
IPL 1.04
SPL 1.40 Olipro
Please Help Me ....
When i started Flashing Have error in Connection ?
Note : I Can Flash Any Rom But i want to flash SPL 2.4 Olipro

engineer.7assan said:
I Can't Flashing SPL 2.4 Olipro
HTC TyTN Herm 200
IPL 1.04
SPL 1.40 Olipro
Please Help Me ....
When i started Flashing Have error in Connection ?
Note : I Can Flash Any Rom But i want to flash SPL 2.4 Olipro
Click to expand...
Click to collapse
what os are you using?

Use the sd card method as per instruction in the Hard SPL thread in uprading part of forum, Page 116, post 1160...

Thaaaanks Thaaaanks Thaaanks
Big Thanks to You ultramag69
&
Spicial Thanks For xda-developers.com
Now I on SPL 2.40 Olipro