I'm trying to switch from 1.37.207.2 to 1.93.707.1... but it gives error after 1 %. Do I also need to flash SPL as in the case for cooked ROMs?
No answer for me?
Have u flash hardspl in to your device? propebly you must do that if you want the 1.93 rom
Actually I have done nothing on my phone up to now... It was stock SPL which was 1.37... you think I need an unsigned SPL? but 1.93 is also original ROM from HTC... I am confused...
ofcoure you can flash this but since it stuck on 1% it can be that the CID in your phone and the 1.93 rom dont match. So u must hardSPL
In general you only can flash the rom you download from HTC e-club without hardspl.
Thanks bro...
HELP on 1.93 ROM
HI i am new to HTC and i have ROM version 1.37. I installed the hardspl unsigned olinex 1.37. now pls can anyone give me the ROM 1.93 to download and how shall i do it? i downloaded several ROms but i cant seem to know how to start it :/
Related
Hi!
My question:
Is it possible to flash the Hard-SPL ROMs with Olinex SPL 1.40 on my T-Mobile-brandet Diamond (Victor)?
Greetings
Dont see why not . You wont be able to flash without it that's for sure
hello i follow up every steps at the forum to unlock my slp but no way my device is
diamond slp v 1.93 plrase please help
i cant speak german and i have to change the rom
thanks for every one
Flash http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705 from http://forum.xda-developers.com/showthread.php?t=400950, then flash what ever ROM you desire. Be sure that your diamond is a GSM-model, not a CDMA-model.
what's the difference this this one TomInMB? RUU_Signed_1_93OliNex_HSPL_UnsignedEdition i have also 1.93 so what's the diff?
The "signed" SPL means that you can only flash "signed" ROMs (they are "approved", so to speak). The unsigned SPL allows you to flash any ROM for the diamond. I'm not sure if there are any other differences, as I have not used the "signed" SPL.
thank you TomInMB
Hallo,
1 question please.
i had Flashed Olinex SPL 1.40 a long time ago, and i flashed many ROMs (without SPL and Radio).
Can i now flash my Diamond with the new shipped ORIGINAL HTC Rom 2.03 (inclusive SPL and Radio) or do i have to do some things before?
i.e the ROM is ORIGINAL SHIPPED HTC ROM.. untouched!
Thanx in Advance
WBR
Siemens Lover
SiemensLover said:
Hallo,
1 question please.
i had Flashed Olinex SPL 1.40 a long time ago, and i flashed many ROMs (without SPL and Radio).
Can i now flash my Diamond with the new shipped ORIGINAL HTC Rom 2.03 (inclusive SPL and Radio) or do i have to do some things before?
i.e the ROM is ORIGINAL SHIPPED HTC ROM.. untouched!
Thanx in Advance
WBR
Siemens Lover
Click to expand...
Click to collapse
Yes you can! But put your phone in bootloader mode manually
Thanx man for ur quick answer...
i love XDA!!!!!!!!!
omaga said:
Yes you can! But put your phone in bootloader mode manually
Click to expand...
Click to collapse
I did hspl. I think. I three colour mode i have 1,40 olinex.
But now when i try to instal one of these officiel roms after it goes to 100% comes message image is corupted on RUU and on phone couldnt load rom try again.
But all these custom roms installing correct why I cant install these officiel roms?
Thanks
Rogan
You might want to update 1.4 to 1.93 HSPL and try again.
Get here
R3PUBL1K said:
You might want to update 1.4 to 1.93 HSPL and try again.
Get here
Click to expand...
Click to collapse
I geting error on Ruu
"ERROR [270] : Update Error"
The image file is corrupted, Please check your Update Utility.
On phone 3 colour mode:
Diam 100 64M
SPL-1.93 OliNex
MicroP-Diam (LED) v11
Psoc-Diam STAGE_PVT v0x30
Upgrade ROM Code error
Please try again
I took officiel rom from here
http://forum.xda-developers.com/showthread.php?t=471699
Found this topic! hope it will solve my problem.
http://forum.xda-developers.com/showthread.php?t=486524
Hi to all, I'm looking for original stock spl 2.03 for warranty reason (I upgraded my diamond with official 2.03 ita rom), where I can find it?
Thank you.
diego1810 said:
Hi to all, I'm looking for original stock spl 2.03 for warranty reason (I upgraded my diamond with official 2.03 ita rom), where I can find it?
Thank you.
Click to expand...
Click to collapse
find stock 1.93 spl. install it
than reinstall 203 rom the 203 spl should install with the rom
spl 2.03 doesn't exist ...
in 2.03 package there are rom and radio
after installation 1.40 OliNex remains
dome.diamond said:
spl 2.03 doesn't exist ...
in 2.03 package there are rom and radio
after installation 1.40 OliNex remains
Click to expand...
Click to collapse
Only If you install 2.03 in a diamond with original spl and rom (1.93 es.) it install spl 2.03
hi guys,
I arrived here bouncing...
I m trying to update my Movistar (spain) ROM 1.93.621.2 RADIO 1.00.25.05 G 52.29.25.12W (spl 1.93.0000)
but I have no idea on how to do it. I m trying to get the "last" SPL cause mine is already 1.93
But i haven t found a valid link.
Would you mind giving me the valid links to a 1.93 signed (by olinex) HardSPL or better to a 2.03 signed (by Olinex) HardSPL, and then another link or a zip file for the 2.03 ROM? Just can t find it anywhere. (no valid links anymore)
If I get well what you said here, I should:
1/ install HARD SPL 1.93 (where can I get it? is it the one from Olinex? 1.40 is not 1.93). Is my 1.93 stock SPL valid for this?
2/ get a ROM 2.03 package taht will come with ROM and RADIO (and SPL 2.03?)
http://forum.xda-developers.com/showthread.php?t=471699
Here are the latest official ROMs.
Still, I don t know if I have to go for a Olinex 1.40 HARDSPL or for a 1.93 SPL signed by Olinex (can t find it!!!)...
Please heeeelp me in this!
I already backed up the device (though haven t dumped the ROM) with SPB.
But don t dare touching the 1.93 SPL.
Olinex 1.40 SPL is older than 1.93 ?
With 1.40 SPL can I just flash the 2.03 ROM? (i think so with what I ve been reading) Or do I need the most recent SPL?
iorga1 said:
http://forum.xda-developers.com/showthread.php?t=471699
Here are the latest official ROMs.
Still, I don t know if I have to go for a Olinex 1.40 HARDSPL or for a 1.93 SPL signed by Olinex (can t find it!!!)...
Please heeeelp me in this!
I already backed up the device (though haven t dumped the ROM) with SPB.
But don t dare touching the 1.93 SPL.
Olinex 1.40 SPL is older than 1.93 ?
With 1.40 SPL can I just flash the 2.03 ROM? (i think so with what I ve been reading) Or do I need the most recent SPL?
Click to expand...
Click to collapse
So far I know, there is no signed 1.93 SPL. Different versions of SPL (signed and unsigned) can be found here: http://forum.xda-developers.com/showthread.php?t=415191.
More info on SPL can be found here: http://wiki.xda-developers.com/index.php?pagename=SPL%20Questions%3F
I use the 1.93 and have no problems at all with 1.93, 2.00 and 2.03 ROM's.
I did not test it, but there are a lot of people with 1.40 SPL using all kinds of ROM's with no problems at all.
You can use what you want, it will work OK ...
Great!
Thanks a lot!
a couple of things:
- my model ID is DIAM300... will this be a problem? (I haven t found anything really clear on this in the forums)
- yesterday, using the pen, as everyday, sliding some pics, i striped? scratched the screen!!!
I noticed the pen was a bit sharp but it was too late. There s a bad scratch on the screen. Have you ever heard about this? Any feedback? It is wearing a small transparent plastic protection (shipped with the phone) but it indeed scratch my screen. As it was "normal use", "normal conditions", and the pen was not /is not damaged, I can t beleive it.
Should I worry?
Ok all expert here i want to ask a question. I want to send my diamond for a repair that still in warranty. before this i've load olinex unsigned 1.93 spl. but when i reflash to original official 2.03 rom the spl is still the same and not the 2.03 version one. I've done using the nbhutil to extract the spl module from official rom and make it an nbh format. but when i flash the spl only it still the 1.93 version. how is this happened?
**do u really think that they will check for the spl version before repair instead of official rom loaded? i'm afraid just because of the spl version is not the official one will void the warranty.
please help me. sorry for poor english.
Hi,
Flash a stock rom. Stock rom thread (it will update your spl, radio, flash):
http://forum.xda-developers.com/showthread.php?t=471699
mrm2007 said:
Hi,
Flash a stock rom. Stock rom thread (it will update your spl, radio, flash):
http://forum.xda-developers.com/showthread.php?t=471699
Click to expand...
Click to collapse
I already flashed to the stock 2.03 rom but when i check the bootloader version its still spl-1.40 olipro. before this its spl-2.03. so how?
Your SPL is Hard-SPL, meaning: write protected. You can only overwrite it using Soft-SPL (= SSPL). Search and you'll find it.
I had to return my handset and returned to different official ROM and SPL than supplied by the operator. So I would suggest to use 1.93 for both check this post/thread. Once you have your phone back to 1.93 for both SPL and ROM - Load your 2.03 ROM which should update the SPL too.
http://forum.xda-developers.com/showpost.php?p=2324837&postcount=20
Check the top of the same thread too HERE
if you search ( ReStore Hard SPL ) you can see my post about your problem
Hello, and everbody hello,
please tell me, is it possible people from company where i buyed HTC diamond
Diam100 64m
microp-diam (led) v11
psoc-diam stage_pvt v0x32
to discover, am i changed STOCK SPL to HSPL unsigned, when i back to STOCK SPL uploaded in post #20 , i'm not sure which one from that post to use ?
1.34, 1.38 , 1,93 or ?
I'm not sure what was originally - stock SPL which came with my phone , i sent mail to HTC support to ask him, do they know to tell me over S/N what was first originally SPL on my phone, but they tell me all information what they have, but not 1st version of SPL.
Information are like this
SN :HTxxxxxxxxxxx IMEI :xxxxxxxxxxxxx Part Number :xxxxxx-00 Part Description :SKU,HTC,Swedish,SWE,UMTS 900/2100,Cut,Black,Diamond-XX,w/oSIM LockSIM Lock Customer Name :xxxxxxx : HTC Model DIAMOND-XX
this phone is buyed in Sweden, and my problem is, i don't know what version of STOCK spl from post #20 to use for warranty, cause i have to send my phone in service for repairing, but what Stock SPL to use, for no discovering from people which work in repairing service?
I remember version of stock rom was 1.93 Swedish, one before latest, but for SPL i'm not sure, maybe 1.34 or 1.35, i scarried they will discover me, i used HSPL, and i don't know what stock SPL to put on my HTC for warrant and no discovering about using another SPL-s like HSPL , unsigned,signed etc..?
Tnx in advance everbody for help!
God bless you
Greetings
p.s.
Phone is buyed - unlocked, not signed for some mobile operator or similiar! It came just with stock ROM - 1.93 swedish, and maybe 1.35 spl or maybe 1.93, it's buyed before 1-2 month, maybe that will help me to discover which was stock SPL, and which one i have to use for warranty?
please somebody help, cause this is urgent for me, i have to send phone in service today
tnx in advance,
greetz