in my tp2 i noticed that when i have a wired or bluethooth headset conected and someone calls me it only rings in the headphones! this made me lose several phone calls.
in other devices i had , i used a reg hack for it to ring in the device speaker and headphone,so i tried in my tp2 but it does not work as the reg hack is related to the microsoft bluethooth stack.
therefore i m asking for help and also if other tp2 users can confirm this issue.
my bt heaset is a jabra bt3030.
thanks
I am having the same problem with my TP2, the headset becomes useless for this reason.
I use a Sennheiser MM-200 headset, bought this headset not to have earphones plugged in ears all time but only when i have incoming call.
Not sure what to tell you about the wired headset, but is your BT using the normal headset BT profile or is it connecting also with A2DP/Stero BT? That could be part of the problem.
In the Bluetooth menu it is connected with: "Stereo Audio" and "Hands-free"
you can switch off the stereo audio function and stay with the hans-free function only. it works fine, but you have to do it manually.
wolfgang
I made a soft reset and now the phone rings even with stereo audio enabled - whats good for me, but i do not understand why
Hi Faria,
There is a setting in the BT config to transfer "ALL" system sounds to the connected audio device, this may be your issue. I don't use a wired but my Rhodium rings in the headset and on the device after removing this option.
Cheers,
Beasty
I really hate this feature too. I am used to listening to music on my BT hedset. So when I get home I would just take them off, put the phone on my desk and go about my business. But if I don't disconnect the headset now I won't notice it ringing... which can lose in lost phone calls.
Hopefully someone will find a workaround.
Start>Settings>Connections>Bluetooth
First tab (gears)>Advanced>Audio
"Play system sounds on remote hands-free device" = uncheck
Just tested and works for me.
I get the normal ringtone from the phone and the regular "beep" from the stereo headset.
FYI, this is basically the same information as listed two posts up...
On my old phone if my headset was in and my phone rang it would say call from and state the persons name through my headset. The ringer itself wouldn't play through my headset nor the phone. And now I can't remember but I know it beeps in my ear but I think the phone plays the actual ringer also at the same time. But if I checkmark what you guys are unchecking will the actual ringer play through my plantronics bt headset and not on the phone.. I kind of would like that for if I am out and dont' want my phone to ring all loud I would rather the ringer play in my ear and was wondering if that's what happens when I check that. Mine was unchecked when I got the phone.. I don't havea bt headset I use for music just talking mostly when driving..
Hi Guys
I am in trouble. My phone is stuck is in headset mode when receiving calls. Really doing my head in.
The problem is started when my new car. I have never used any headset with this phone.
New car has a Bluetooth handsfree. When it's connected all calls received goes in headset mode. But if I make a call via the car Bluetooth handsfree there's no issue . When it is disconnected from the car connection the same problem continues, although a restart solves this problem.
How can I solve this issue with car Bluetooth? It was working well with my previous car Bluetooth system, e.g. Parrot Bluetooth.
Does this also keep stuck when turning off bluetooth only?
Hi there.
I'm facing an issue with my note 2 since a few weeks.
When i plug in a headset with mic to make a call, the sound isn't redirected through the headset, it remains on the phone speaker.
This is quite annoying and it used tk work perfectly. I noticed that during the call when i plug in/plug out the headset, the sound goes tbrough the headset , but only for like 1 sec, then back to speaker.
I've tried with 2 diff headsets.
FYI, during music and vid playing, the sound goes though the headsets. Really odd issue.
i also face the issue that when i activate the BT, and try to stream the music to a BT device, the sound goes back to the speaker.
It used to work also but not anymore. Its not a pairing issue, i've tried many times.
I guess both issues are connected. Any help to solve those problems would be appreciated.
THX
No one ?
bump cause i'm still facing the issue
Please people i need a help.
When i reciving a call while i connected with my car audio the ring of the phone
Sounds pitchy and weird.
After i leaving the car and i coming back and the phone is reconnects,
The phone music player starting to work but without sound from car speakers.
After i leaving the car, the phone stops ringing, turning to kind of silent mode or
Somthing.
All cm12 based roms, same issue. Tried all of them.
Please, if someone can help me.
Tnx alot
I have a Moto z play, when I play the audio via Bluetooth speaker the audio suddenly gets transferred to my mobile headset and starts playing via headset even when the Bluetooth speaker is in connected state, I have to disconnect the device and reconnect it inorder to play the audio back on the Bluetooth device, does anyone else have the same issue ? Is this a software glitch or a defect with my headset itself ?
The head set is a Bluetooth headset?? Your device probably recognizes that as a primary Bluetooth source and will connect to that first. Turn off the Bluetooth headset off and that will solve the problem....
coyotefiveoh said:
The head set is a Bluetooth headset?? Your device probably recognizes that as a primary Bluetooth source and will connect to that first. Turn off the Bluetooth headset off and that will solve the problem....
Click to expand...
Click to collapse
Thanks for the replay. It's actually my mobile which starts playing the music instead of my Bluetooth speaker however the speaker is still connected to headset and I can control the audio play,pause and next options from the speaker but the sound comes out of my mobile speaker instead of the Bluetooth speaker the same happens with my Bluetooth headset. I have to disconnect the Bluetooth speaker and reconnect it to play the audio from it.