HTC Touch Pro 2 known bugs - Touch Pro2, Tilt 2 Windows Mobile General

Here are 4 HTC touch pro 2 bugs that I am aware of.
The first one, HTC is aware of and working on a fix(for the last 4 months)
1. Announce incoming calls does not work. (settings, all settings, voice command,phone,options)
2. If you send one text to 2 people, the sent text only shows up in one of the 2 person's thread in the touch flo 3d.(it still shows up in both people thread's in windows mobile thread, go to text messages, all messages, select thread)
3. The phone wakes up to show new text messages, leaving it open to make unwanted calls(if its in your purse or pocket)
4. When adding a new contact phone number doesn't always automatically add parenthesis, spaces, and dashes so a number in your contacts list will look like 3236155555 instead of instead of (323) 615-5555. If you add the number from your call history the parenthesis, dashes, spaces will be added correctly.
anyone know of any edits or hacks to fix any of these(and that are confirmed to work on the touch pro 2)

I don't know about the first 2 but for the third one, it doesn't happen to me. I changed the settings in such a way that the phone doesn't show a message so it doesn't wake up (Look up the seetings in the sound section), and even if it does i use the auto lock which means its gonna be locked and in 1 minute the screen goes off so its OK.

It might be an idea to mention which version of the touch pro 2 you have, and which ROM you're using.

monomer888 said:
It might be an idea to mention which version of the touch pro 2 you have, and which ROM you're using.
Click to expand...
Click to collapse
Im using original touchflo3d rom that came with the phone on Sprint.
ROM:1.21.651.3
I tried the fix mentioned above about Not displaying new messages on the screen, but my phone still wakes up, now it just doesn't display the message.
I do not have my phone locked.
Of courise if the phone is locked it will not place calls, show new texts, or open programs without the unlock code. But typing a 4 digit code before calling someone, checking the time, or seeing a text is annoying. They dont allow 1 digit lock codes, or even 4 0's, or numbers in sequence.
I'm sure the lock would be useful for many people, but for me it's too much.

Can I also add a 4rth bug.
when adding numbers to your contacts the phone doesn't always automatically add parenthesis, spaces, and dashes.
So a number in your contacts list will look like
3236155555
instead of
(323) 615-5555
not a big deal(you can add the parenthesis and dashes and spaces manually) but still annoying.
if you add the number from your history it will do it right, but if you create a new contact and enter the number it will show it as a series of numbers with no spaces,parenthesis, or dashes.

Related

Touch 4.01 help

I have been using touch 4.01 for a while now and I really like it. The only problem I have is when it comes to making calls (the main reason for a phone).
When I go to contacts and try to display a list, all I get is a list of contacts that I have already made a call to (i.e. history) not the actual list from my sim card. I thought that maybe my sim was not being read but when I start to dial a number (If I happen to know it) It will come up with the persons name. Unfortunately If I don't know the number I can't dial them.
The only way I have been able to work round this is to go to favorite people and add a new person (as from here it will display the whole contact list). Unfortunately favourite people can only hold 8 numbers.
Basically I want to know how to show my contact list that is on my sim card and not the numbers I have already dialed.
Thanks in advance but It's really starting to bug me now.
Khalid
May U run SIM Manager in Program/Accesories and copy all contact to Your PPC or run Advanced Config in Settings, line "Show Sim Contact" and active "Yes" and Reset your PPC.
Goodluck

another bug in WP7

First off
Samsung Focus 1.3
Mango RTM
I have a contact with a Mobile phone entry under "Mobile" and his Work Cell phone is listed under "Work"
When you go to Messaging and hit the plus sign to create a new Text then start typing the name. The Work number doesn't show in the type ahead.
So for me to create a multi party text I have to hit the plus sign across from the TO: and navigate to the contact and select that number. Very annoying.
That's not a bug, a work number by default is a landline phone for cell phones. You dont often send texts to land lines so they dont have the option there. If it's a mobile number set up a second mobile option.
If you create a second contact entry just for your friend's work cell phone, and then link the two contacts together, both numbers will be available to select from the list when you type the name. It isn't a perfect workaround, but at least it works.
z33dev33l said:
That's not a bug, a work number by default is a landline phone for cell phones. You dont often send texts to land lines so they dont have the option there. If it's a mobile number set up a second mobile option.
Click to expand...
Click to collapse
In Windows Phone 7 that may be the case. The reason I feel that it is a bug is because I can select the contact manually and the option is there to text the "Work" number and when creating a blank text I can hit the plus sign and when I go to that contact I can select the "Work" number.
For the type ahead function the "Work" number isn't populating. That to me is a bug when its selectable in other parts of the OS.
Also what Cell Phones are you talking about? Try this on a iOS or Android device and the work number will come up as selectable when using the type ahead.
Right now this is just a minor annoyance(yet extremely irritating) to a platform that I love.
hwalker84 said:
In Windows Phone 7 that may be the case. The reason I feel that it is a bug is because I can select the contact manually and the option is there to text the "Work" number and when creating a blank text I can hit the plus sign and when I go to that contact I can select the "Work" number.
For the type ahead function the "Work" number isn't populating. That to me is a bug when its selectable in other parts of the OS.
Also what Cell Phones are you talking about? Try this on a iOS or Android device and the work number will come up as selectable when using the type ahead.
Right now this is just a minor annoyance(yet extremely irritating) to a platform that I love.
Click to expand...
Click to collapse
I think the logic is that, the mobile number would be the primary method of communication because generally most people have one cell number they associate for friends and family.
The thing that gets me is that the threaded messages for the same contact with different numbers doesn't get grouped together despite the OS recognizing they belong to the same contact and that you can use the switch button to text to the different number

Change order of phone numbers per contact?

Is there a way to change the order in which contacts are listed? For example, I have Work, Mobile, and Home for some people. I'd like it so that Mobile was listed first since that is the most often called number.
I can't figure out how to do this. I've tried setting default numbers as well as changing the order on my Google account, adding then deleting, changing names of numbers back and forth, etc. It doesn't seem like it's alphabetical either because for one contact it goes A..., Mobile, S...; and for another contact it goes Work, Mobile.
Is there anyway to fix this? It may seem minor, but it's annoying to have to it listed in the order of Rare Work Location 1, Mobile, Rare Work Location 2.
It displays them properly, but only in contact app, I just tried to long press set as default and that number jumps in the first position.
But when you are in phone app, I think number that you dialed the most comes up as first etc, not sure thou
Sent from my Galaxy Nexus using xda premium
As a workaround, have you tried putting the number you want to come up first in the "main" number field of your Gmail contact list?
setting one as default always have worked for me? When I call that person any way that is the number dialed.
Nope, no luck with the "Main" thing or setting as default within the People app, even though set as default does swap the listed order within the People app. I am now almost positive that the phone app is organizing them based on the phone numbers themselves, which makes no sense.
Contact 1:
Mobile: 1248...
Home: 1734...
Contact 2:
Home: 131373...
Mobile: 131380...
Contact 3:
Work: 12486...
Mobile: 12488...

[Q] Dialing By Name Problems (Update: Google Sync Problem)

Hi all, just a strange issue I am having I hope you can help me. I noticed when dialing by name when new, this phone kept wanting to bring up the home number when I want to dial the mobile by default. So, I headed into the contacts and discovered I could set the "default" number by either long pressing the desired number and selecting "set default" which then puts a blue check mark next to it, or I could be in the contact, press menu, then "mark as default" which opens a window where I can select the default email, phone number, etc which also will put a blue check next to the number.
Now then, all my contacts are stored on Google, nothing on the phone or SIM itself. For some reason, the default number for one of the most frequently called people in my address book will not "stick". I mark it as default, I can dial by name and it shows up correctly, but then the next time I go to do it (sometimes even 5 minutes later), it will be back to having no default number set and gives me the home number instead of mobile.
Oddly enough, the three other numbers I marked with a default number never do this to me and work every time, only the one contact entry doesn't work. I can't think of any other reasons why this is happening. My ONLY thought was that for some reason when syncing, Google keeps over-riding the marked default number. But why would it do it for JUST this one contact and not the other 3?!
Any ideas? Looking forward to thoughts. Kind of an embarrassing problem since it's so simple, but I can't figure it out...
www.google.com/contacts
Do you have more specific of a suggestion than simply giving me the site which I have already been to a couple times? The Google contacts interface doesn't seem to support "default numbers" and there is no way I could find to set a default number via the web interface. I believe the default number is an "on phone" setting. Thus, I am confused why it works on some contacts and not all.
Update: I noticed this same contact also won't upload changes to phone numbers, addresses, etc made on the phone for some reason, so this could be more of a Google sync problem. Again, it's only this one contact.
If I make changes to other contacts, they are reflected on Google's servers correctly. If I make a change to the phone number of this specific contact, after a few minutes, it goes back to what it previously was. It seems it's always pulling down from Google's servers and replacing the changes I made on my phone. It's like somehow only this contact was set to only pull down information, not upload it also. I also could not find any settings for changing the location of the "master" when there are changes or conflicts or anything like that on Google's website.
Anyone else have any suggestions? Thanks in advance.
Bump to the top, still have this issue.
Not much help here, as I'd love to know how to do this at a higher 'Google' level than just on my phone too. Are you syncing contacts with any other applications? For example, Facebook?
No, it's a stock Galaxy S4. Although you bring up another question I have had. When I have my contacts on Facebook synced "only with existing contacts", friends on Facebook still show up when I try to dial by name even though they do NOT show up in my address book. What's up with that? Is that the fault of Facebook? I seem to remember my HTC phone doing this as well, so I disabled syncing with Facebook contacts completely.
Today I tried removing the Google account, clearing the data and cache for contacts and contact storage, then adding the Google account again and letting contacts sync. I then set default numbers for 5 phone numbers. 10 minutes later, all but the one contact I have had problems with still had the default number set. The one contact cleared the default number - again. I just don't get it...
02CWRX said:
Hi all, just a strange issue I am having I hope you can help me. I noticed when dialing by name when new, this phone kept wanting to bring up the home number when I want to dial the mobile by default. So, I headed into the contacts and discovered I could set the "default" number by either long pressing the desired number and selecting "set default" which then puts a blue check mark next to it, or I could be in the contact, press menu, then "mark as default" which opens a window where I can select the default email, phone number, etc which also will put a blue check next to the number.
Now then, all my contacts are stored on Google, nothing on the phone or SIM itself. For some reason, the default number for one of the most frequently called people in my address book will not "stick". I mark it as default, I can dial by name and it shows up correctly, but then the next time I go to do it (sometimes even 5 minutes later), it will be back to having no default number set and gives me the home number instead of mobile.
Oddly enough, the three other numbers I marked with a default number never do this to me and work every time, only the one contact entry doesn't work. I can't think of any other reasons why this is happening. My ONLY thought was that for some reason when syncing, Google keeps over-riding the marked default number. But why would it do it for JUST this one contact and not the other 3?!
Any ideas? Looking forward to thoughts. Kind of an embarrassing problem since it's so simple, but I can't figure it out...
Click to expand...
Click to collapse
I have the same issue and it ticks me off every time, and it happens with any contact that has multiple numbers. There doesn't seem to be any way to choose the alternate numbers when you do search by name from the dialpad. you have to do it from the favorites or the contacts tab instead.
Does yours clear the default from EVERY contact that has multiple numbers? Mine only clears the set default number from ONE SPECIFIC contact, and I can't figure out what the difference between that contact and any other contact is. Or, if you are saying you can't figure out how to set the default numbers at all, I gave instructions on how to do it two different ways in the post you quoted.
As for selecting an alternate number from the dial pad, I figured that out too. So, let's say you want to call Mike. Dial 6453 (MIKE) and you should see the name pop up. To the right of the name is a down arrow with a number above it. The number is telling you how many contacts what you have dialed matches. Tap the down arrow and you will see a list of people and their numbers under them (or just the one person if that's all that matches). If you tap again on the name, you will in fact be given a choice on which number to dial (assuming the contact has more than one number saved for them).
So basically, it's a long annoying process that shouldn't have to happen, but it is possible to do it. You have to start dialing by name, then make a screen selection, then another selection, then another, then finally the dial pad is pre-filled with the number, but then you have to remember to hit the actual call button at the end of all that crap. I find it's easier to find a text from the person and swipe the screen to dial them that way sometimes (or from within the text tap the call icon), or from the call history tap the call icon. Or of course as you said, favorites or contacts.
My HTC used to just let you dial by name, tap the number you wanted, then it would start calling. Easy peasy.
Bump to the top again... Still trying to figure this out. So annoying.
Bump. I dial this number every day...
Some stupid questions: 1. Do you have more than one contact details of the same person? 2. Did you delete and re-add the contact. Also delete from all other syncs?
Sent from my Nexus 7 using Tapatalk 4 Beta
The contact is only listed as a Google contact, and has no other links or connections from other sources. Facebook is not synced, nor is anything else. It's only Google contacts. I haven't tried deleting and re adding yet. I guess that's a simple thing to try, its just that there is a lot of info in there, haha.
Ok, via web browser on the PC I exported the contact, deleted it, and synced my phone. Contact was gone. I then added a contact via web browser, typed in all the same info, synced the phone, and the contact is back. I then selected the mobile number, marked it as default, synced the contacts again, and there was no longer a default check mark next to the mobile number.
I have at least 3 other contacts where I don't have this problem at all. They are all stored on Google, they are all friends on Facebook (even though they aren't linked to FB in the contacts because of the above listed problem where everyone on FB shows up when dialing by name), they are all in circles on Google Plus. I can't figure this out at all. What the heck...

S9 Text Messages - How to tell which number for a contact I am texting with

Since replacing my S7 with an S9, I can no longer tell what number of a contact I am text messaging with. I have several family members and friends/coworkers where I have them as a contact but with both work and home cell phone numbers. There are times when I need to text them on their work phone and times when I need to only text them on their personal cell number. On my S7 I used to be able to see the phone number (or even email address if I was texting an email address for a reminder or something) underneath the contact's name at the top while in that text messaging exchange, but when moving to the S9, it only displays their name at the top. Tapping on the contact name does no good as it just takes me to the contact card for that person and shows me all of their available contact numbers/addresses. Any idea how to clearly/quickly tell which number that text exchange is with (other than by guessing based on the context of the past messages in that exchange?)
This comes in handy for reminders for myself as well. I have several different text strings going with myself to send reminders to my work email, home email, etc. There is no way to easily tell which number or email I am sending a text to unless I'm missing something.
Thanks for any help!
I had to load up Samsung messages to look at that since i used it 2 minutes before i decided i didn't like it. The only way i can see is when you click on the contact's name their number shows with a > besides it. Click on their number and select the number to text. Inside a text i see no way of identifying the number. I see your problem though. My son works in a high security area where he might text me from his business phone but never from his personal phone while there. If he texts me I alway just reply to wherever the txt comes from. So far it's worked but I can see where it may not if he moves from one area to another.
You can tap the phone icon in a text message and it will pull up the dialer and show you which number it is. Like I have my wife's work cell and her personal numbers and I have them designated as mobile and work. Hope that helps.
Probably easier to create a new contact for each number tbh
*Detection* said:
Probably easier to create a new contact for each number tbh
Click to expand...
Click to collapse
If I have contacts with multiple numbers, I just designate what each number is like I did with my wife. On the S9, if she texts me from her work phone, it doesn't add to the currently ongoing text conversation I have, it is a new text thread.

Categories

Resources