Tilt2 - Can't Bluetooth dial when device is locked - Touch Pro2, Tilt 2 Windows Mobile General

On the Tilt2 I can't Bluetooth dial the phone when it is locked. This was not the case with prior Windows Mobile phones. Is this a 6.5 thing? or a AT&T bloat thing? Is there a workaround?
Thanks,
Mike

I don't think it's a 6.5 thing. I think the ATT ROM has some strange Bluetooth program in it. It's a great deal different than the cooked 6.5 ROMs that I had on my Kaiser. I'm having some Bluetooth file transfer issues that I never had with the other 6.5 ROMs I've used...

I think its in the new Bluetooth-Stack of TP2, got the same issue with my german T-Mobile MDA V.
In Germany it's against the law to touch your phone while driving... Very anoying issue!

Here is another thread started back in July with the same issue.
http://forum.xda-developers.com/showthread.php?t=540502

I have sprint with the stock 6.1 rom. I also think that there should be registry key that allows this to work. It seems that some of the newer 6.5 roms allow this to work.
This only happens when locking with the built in Windows Screen Lock.
Can someone with a working 6.5 rom please post the following registry info to see if there is a way to enable the bluetooth dialing on the roms that are not working?
HKLM\Software\Widcomm\General
When you get the unable to dial message it puts a new key in there called DontAskHfpCallFailOnDeviceLock and I figure that the bypass might be in this same area.

On my Verizon HTC Touch Pro 2 with Windows Mobile 6.5 (Build 21874.5.0.83), I just stumbled on a solution that seems to work: Go to Settings:All Settingsersonal:Voice Command, uncheck Password Protected. After doing this, I was able to Bluetooth dial when the phone was locked.
On my phone, after I had unchecked Password Protected and Bluetooth dialed successfully with the phone locked, I was able to check Password Protected again and it keep on Bluetooth dialing with the phone locked. However, when I did a soft reset, I could no longer Bluetooth dial on the locked phone until I unchecked Password Protected again.

Related

Cingular Siemens SX66 - WM2K5

Please focus all issues if you have updated your Cingular Siemens SX66 to the Windows Mobile 2005. I have various problems that are scattered throughout this forum. We need to get everything set into one sections so we can go through it one by one.
In this forum
http://forum.xda-developers.com/viewtopic.php?p=151346#151346
Mamaich has proven to be the best when it comes to changing up the software for the Siemens SX66. Even with all his updates and changes, there are still some minor issues that have recently been fixed.
Even with the updates, list your issues here so we can get a fully compiled list of issues.
Be specific as possible and details on how we can reproduce your issues.
Also make sure you are running the latest and greatest from XDA-Developers meaning your specs should be as follows:
Cingular Siemens SX66 - PH20B
Windows Mobile 2005
ROM: 5.03.02
Radio: 1.13.00
ba_wm5_fix_v3.rar
ba_wifi_fix.rar
remove_camera_reg_v1.rar
Headset_Today.rar
Buttons_Fix_v2.rar
1. Bluetooth Static is still there using barious headsets including Motorola HS810 and Sony Ericsson HBH660.
2. On a soft/hard reset, it deletes the pop3/imap information I put into the BA so that if reset, I have to setup my email settings everytime something happens that requires me to reset my device.
3. Lock all buttons option is reset everytime the device is reset.
4. The clock time and date still resets everytime the device is soft/hard reset.
5. When making a phone call, my phone always says AT&T even when I know for a fact that the phone is on a Cingular Wireless Cell Site. (I'm an Agent for Cingular)
6. When the screen is put into a landscape mode, the hard directional buttons respond as if the screen was in a vertical state.
7. Randomly, GPRS tries to connect when I open up my messages section.
8. There are two battery options in the system portion of the phone.
Suggestions
1. Make task manager available in the same section as where the bluetooth section is so that we can manually kill running applications easier.
2. I would like to know if anyone could possible program the phone ring tones to go through to the BT headset on top of cleaning out the static.
I also wanted to mention that MS Voice Command works great with the latest patch. Search for the volume patch for MS Voice Command.

Probelm with WiFi

Hello there,
What I Have: Att 8525 Herm100
Rom: Att's Mobile 6
Everything is stock but the extended life battery
The problem I am having is when ever I try to activate my WiFi the phone doesn't do anything. I am not sure if there is a wifi card or not but that's want I want to know. I have tried everything from activating it in com manager to going into the settings and activating it manually and nothing happens it acts like I didn't even hit the button to activate it. Is there a wifi card in the phone or is it integrated on the motherboard in the phone. Note: I bought this phone off e-bay and the wifi never worked when I received the phone.
I am new here and if there is a post about this already I am sorry.
I hate it when that happens.
To begin, there were two ATT OEM WM6 roms relevant to the 8525 that I noticed deep in the bowels of XGA.
I chose the later file (higher revision numbers) I found it here:
http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
From comm manager when I click the tower button on within a second the spinning windoze icon shows something is happening. It then starts "sniffing" for my preset wifi connection (ATT supplied 2wire portal 802.11g).
Now, if yours does not show the spinning windoze working icon when you turn on wifi? There obviously is a problem. This could be software, or hardware related (duh). If there is no error message related to "wifi is not an option, unavailable, or screwed" then my first guess is there is something missing or damaged in the ROM update that was applied to your device. As far as I know all 8525 (herm100) were shipped with wm5. It had been mentioned in the volumes of xda that the first AT&T WM6 rom was a little buggy. Try the later released AT&T WM6 update.
It was a run file so no muss no fuss. Sync the phone run the update from the pc, three minutes later the phone is flashed to ATT WM6 professional.
You could take it to a ATT shop? But, I think that without a doubt they would hand it back and say you need a new phone with a 20 year contract and 3g data plan even Obama would blush at.
Try the hard reset. take a picture of the startup screens so you have the numbers and see if the wifi startup is working after the reset. If not then compare the numbers to the above mentioned roms. If the indications are you have the first issue of WM6 from ATT try flashing the second release. If that still fails then your device could indeed have a hardware problem.
The wifi is indeed built into the system and if that chip on the board is not working it could be a overly expensive problem. Possibly a shop has a working board they would swap out cheap? Otherwise, it is a fun phone you can keep notes on, run gps software if you have a bluetooth gps receiver and software like tomtom.
To be honest the wifi on my 8525 has been convenient when around the house to check the local weather radar when I hear a thunder outside, or browse headlines from the porcelain room or even leave messenger turned on incase a gamer friend is looking for someone to get shot up in a game.
I have used the live search voice thing to amaze the neighbors once. But, the limited range of wifi is a real drawback to how truly wonderful that addition could be.
HELP Please! Wi-Fi not working!!!
Hi to XDA all users !!!
MY Hermes - HTC TyTN [Herm200]
I bought HTC Hermes myself year ago.
there was flashed a WM5.0, I've just downloaded from here HARD SPL & WM6,1 (Custom) Flashed.
Wi-Fi will works on WM5.0.
Well here I am at 6.1 flashed and now is not working Wi-Fi. When i pressed Power ON - loading long and nothing happens.
Other methods are also tried on Commanager and Settings - but did not help.
What do I need to do my dear.
HELP!
Thank you for your attention!
Hi Nurk.
Since the wifi worked on wm5 but failed after the 6.1 flash. I would guess the problem is in the 6.1 components. You might start with contacting the kitchen rom you employed for WM6.1 thread and see if this has happened to others. Next step would be to check the radio rom version. I did see on xda an assortment of Radio roms.
If your not totally in love with the current rom you have flashed? Try another 6.1 or even a 6.5 and see whats poppin.
and what you have in HKLM\Software\HTC\CommManager\WLAN\DeviceName?
utak3r said:
and what you have in HKLM\Software\HTC\CommManager\WLAN\DeviceName?
Click to expand...
Click to collapse
I have get this from registry:
HKLM\Software\HTC\CommManager\WLAN\DeviceName - {98C5250D-C29A-4985-AE5F-AFE5367E5006}\TIACXWLN1

Handsfree Dialing while phone locked

Hi Guys,
I've just ordered 17 touch pro 2's for work and I'm very impressed with them so far. Absolutely awesome phone. We've just got one issue which is the fact that when the phone is locked (we used centralised policies with exchange) you can't dial from our Parrots. The phone says you must unlock the device to allow bluetooth connection.
Does anyone know a way around this without taking the locks off of the phone which is a big no no. Tested it with a collegue's Omnia and it works fine.
You can replicate this issue by using the Bluesoleil dialer which is what I've been doing for testing.
The parrot receives calls fine, just can't make them he the phone is locked.
TIA.
Same problem
Hi there,
I'm having the same issue for dialling out via bluetooth whilst the phone is locked. The TP2 says it needs to be unlocked before answering the call.
There MUST be some registry key to change to prevent this "feature" ... none of the previous HTC phones I have had have had this problem.
Thanks in advance for any help!
i have the same problem, i installed s2u2, which solves the not being able to dial out when its locked, but it's not the most reliable solution.
i'd rather have it working like it did on my kaiser before this phone.
hope someone helps us out.
I tried out S2U2, but the problem is it's only a keypad lock, so plug the phone in USB for example and you still have full access to the device.
S2U2 also does not stop you sliding out the keyboard and pressing the mail button to read the emails on the phone, so this isn't a solution we can use, it's not even a compromise
Haven't had much luck with HTC support either. They are very quick to respond but don't respond with anything of value.
I just wanted to bump this thread -- I picked up a Tilt2 and have the same problem -- really annoying when trying to dial from the car and having to unlock (didn't have this issue on my Fuze).
Yeah this is the most annoying thing I have ever seen. There must be a way to turn it off. I use Ford Sync and really don't want to have to worry about my phone being locked or unlocked. Seems like this goes against all those phone laws. You are making me look at my phone first to make sure it isn't locked before I can safely dial.
Wish I had found this thread before I went ahead with getting a Tilt 2. Didn't have this problem with my Tilt.
Is this a WM6.5 limitation? Hopefully there is an obscure setting that I'm too stupid to find.
Cheers
... and I was just about to ask on this thread whether or not this was still a problem in WM6.5 but I guess I have my answer now.
It's definitely an issue in WM6.0
I contacted AT&T and they said to contact HTC.
HTC gave me this answer:
Thank you for contacting HTC Technical Assistance Center. I apologize for the length of time it took me to respond to your email. I understand how important it can be to use Bluetooth from your device when your device is locked. I will be happy to address the concern for you.
There is not a setting on your ATT Tilt 2 for enabling Bluetooth when your device is locked. When pairing Bluetooth with your vehicle your device must remain unlocked to use the correct functionality. I would suggest placing your device into hibernation mode and keeping your device in a carrying case.
Hi,
I have upgraded by TP2 with the offical HTC rom for 6.5 and installed my blackberry connect 1.06 client. Now, even with the BB lock enforced, as it was with the TP2 using 6.0 and it is working perfectly handsfree in my CAR, locked or not. Previously the TP2 with the stock 6.0 ROM wouldn't make calls when locked.
If people are reporting here that is didn't work in 6.5, then there must be a registry setting somewhere to enable or disable it.
I am just happy that I can make a call in the car, without having to pull over and unlock my phone.
If someone can give me a hint as to where in the registry to look I can compare some settings?
I have a stock AT&T Tilt-2, I loaded loaded "smartlock 1.7" to autolock the phone at power off and also when "in-call" to avoid random dialing. I don't use the PIN for locking.
I can dial hands free BT in my car and with headsets with no issues, power on/off whatever.
Maybe it'd disabled when locked with the PIN?
I am seeing the same issue with two of my users:
One is using a Verizon Wireless TP2 with MW6.1 stock ROM
The other is using an Unlocked HTC touch Pro 2, on the AT&T wireless network (not a Tilt2) with the HTC WM6.5 ROM upgrade.
The Verizon users is using Sync on his Ford Vehical. The other is using whatever system is in his BMW.
Both can pair with the car's system, but if the phone is locked with a PIN the user is not able to place a call without first unlocking the phone.
Has anyone found any information on this?
If MSVC is an option then it has the ability to dial while password protected.
Just noticed this has been bumped. I upgraded all of our phones to the standard Windows Mobile 6.5 from Vodafone when it came out a month ago and this problem is now resolved you'll be glad to know.
I've got 25 handsets currently working fine with no real issues. All the niggles that I had have gone away with 6.5 so it's definately worth the upgrade.
6.1 was screwed and no use with handsfree dialing if you use windows lock which we enforce on our exchange server.
Seems like every provider is a little different.
I have the AT&T Tilt 2 which came with WM6.5, AT&T support claims its a Microsoft and HTC problem. HTC claims its a Microsoft problem.
Anyone have a good support link to Microsoft to get this problem resolved?
Can someone with a working 6.5 rom please post the following registry info to see if there is a way to enable the bluetooth dialing on the roms that are not working?
HKLM\Software\Widcomm\General
When you get the unable to dial message it puts a new key in there called DontAskHfpCallFailOnDeviceLock and I figure that the bypass might be in this same area.
Registry
Here is everything under the BTConfig\General section.
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\BTConfig\General]
"StackMode"=dword:00000001
"DeviceName"="HTC-ST7377"
"BDAddr"=hex:\
00,23,76,37,a9,89
"BlockBTIfHopper"=dword:00000001
"SendCompressedTelProperties"=dword:00000001
"UsePocketPCName"=dword:00000000
"UnnamedDeviceName"="<No Name>"
"UartPriority"=dword:00000096
"TransmitPriority256"=dword:00000098
"SuspendWithScoConnected"=dword:00000001
"SuspendTimeout"=dword:00001388
"SndPriority"=dword:0000009b
"SecurityType"=dword:00000002
"SCODelayTime"=dword:000007d0
"ReceivePriority256"=dword:00000097
"RadioInitLibrary"="BRCMInit.dll"
"PowerControlLibrary"="Serial_BTUR_DM.Dll"
"PCRemoteAutoConfig"=dword:00000001
"OriginalAudioDriver"="wavedev.dll"
"KeepStackLoaded"=dword:00000001
"EnableAFH"=dword:00000001
"DiscoverableTimeout"=dword:0000003c
"DeviceInactivityDuration"=dword:0000003c
"ConnectRelatedDefault"=dword:00000000
"BIPEnabled"=dword:00000001
"AFHAvoidedChannels"=dword:00000014
black88mx6 said:
Can someone with a working 6.5 rom please post the following registry info to see if there is a way to enable the bluetooth dialing on the roms that are not working?
HKLM\Software\Widcomm\General
When you get the unable to dial message it puts a new key in there called DontAskHfpCallFailOnDeviceLock and I figure that the bypass might be in this same area.
Click to expand...
Click to collapse
erenken said:
Here is everything under the BTConfig\General section.
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\BTConfig\General]
"StackMode"=dword:00000001
"DeviceName"="HTC-ST7377"
"BDAddr"=hex:\
00,23,76,37,a9,89
"BlockBTIfHopper"=dword:00000001
"SendCompressedTelProperties"=dword:00000001
"UsePocketPCName"=dword:00000000
"UnnamedDeviceName"="<No Name>"
"UartPriority"=dword:00000096
"TransmitPriority256"=dword:00000098
"SuspendWithScoConnected"=dword:00000001
"SuspendTimeout"=dword:00001388
"SndPriority"=dword:0000009b
"SecurityType"=dword:00000002
"SCODelayTime"=dword:000007d0
"ReceivePriority256"=dword:00000097
"RadioInitLibrary"="BRCMInit.dll"
"PowerControlLibrary"="Serial_BTUR_DM.Dll"
"PCRemoteAutoConfig"=dword:00000001
"OriginalAudioDriver"="wavedev.dll"
"KeepStackLoaded"=dword:00000001
"EnableAFH"=dword:00000001
"DiscoverableTimeout"=dword:0000003c
"DeviceInactivityDuration"=dword:0000003c
"ConnectRelatedDefault"=dword:00000000
"BIPEnabled"=dword:00000001
"AFHAvoidedChannels"=dword:00000014
Click to expand...
Click to collapse
erenken,
Thanks for the info. The only item different on my 6.5 Tilt2 is that I also have a key "DontAskHfpCallFailOnDeviceLock"=1. Sounded very promising.
Unfortunately, changing this key to 0 and even deleting it doesn't make a difference: I still cannot dial via bluetooth while the phone is locked with a pin. I tried these changes both with and without a soft reset between.
mnunes:
Were you able to find a fix for this? I am in the same boat.
DaBody1 said:
mnunes:
Were you able to find a fix for this? I am in the same boat.
Click to expand...
Click to collapse
No, so far no luck. I can't say I've been looking very hard, though. It's one of those things I've started to learn to live with, as annoying as it is.

password software...

is there a password software for BA wm6.5???
some members here said passwords are bugs in cooked roms and therefore do not work properly...
looking forward for replies...
thanks...
Yes the password has bugs in it in wm6.5, so it may work for a while, but eventually you will be unable to unlock your phone. I used organic lock for a while, but stopped once my BA stopped being my PDA and just became my phone.
i know password doesn't work...well, they worked once but i have to hard reset my BA to be unlocked...
so, any password software won't work on wm6.5?
I think password software will work, as long as it is not the built in one.
i think so too...
does anyone know a not built-in password software?
hi,
you can try using S2U2 made by a_c. basically, it is a program that show you an iphone lock screen on your WM device, it comes with a password locked features, so you just configure it to enable locking once your device is being turned on
hope that helps you. fyi, I'm using it right now and so far its good and stable

BT ToGo HTC s620 Excallibur Roms

Hi I was wondering if someone could help me, I've been trying to unlock my HTC S620 Excallibur all night. It's locked to BT with its stock firmware. I came to the conclusion that I would have to buy a code. Then found I could flash a hacked rom. Which I've managed to do fine. The problem is it won't connect to any network. I've tried numerous WM 6.5 based roms but get same problem with every one. Tried messing with everything, changing connection settings an locals etc. Btw I'm from the U.K, trying to use an O2 Genie sim in it, never had problem with the phone. Had it's contract terminated early, is there any way they can block hardware when disconnecting services? Or does it still need unlock code even with a cooked rom? I've tried an orange, t-mobile and O2 sim in it. The new number for each sim shows in the call settings, and any sim related things like shipped phone numbers and settings. But in the call options the region, area, voice mail and message center numbers are blank. Could that be a problem? Shouldn't they configure themselves. Argh I'm so confused. I'de like to use my S620 as a phone instead of an expensive mp3 player.
Thanks in advance for any help.

Categories

Resources