Related
Heya folks,
I wasn't too sure what to even look for in a search for this one.
I'm moving to the US, I have an Orange M2000. I've been offered a work-cellphone account, but I have to pay for the cellphone myself.
As I already have the M2000, I'd like to use it on Cingular for "Goodlink" services.
Apart from unlocking the network-lock to take the Cingular sim, is there anything else I need to do to prepare the phone? I'd rather not tamper with Rom's etc unless I have to.
thanks again
Rochey
Hello, i was in the same situation last year with my XDA IIs. Moved from London. I have been using it on T-Mob US with no problems at all with regards to call reception, gprs, or sending and receiving sms. Only thing you may want to do is upgrade your radio rom to 1.15, seems to enhance reception a bit. Cheers.
Head over to the SX66 Standardization Project website & grab an extended ROM. Extended ROMs contain operator customization files -- grab them from the extended ROM & install them on your BA.
To efjay
efjay said:
Hello, i was in the same situation last year with my XDA IIs. Moved from London. I have been using it on T-Mob US with no problems at all with regards to call reception, gprs, or sending and receiving sms. Only thing you may want to do is upgrade your radio rom to 1.15, seems to enhance reception a bit. Cheers.
Click to expand...
Click to collapse
Hi there, I live in California and bought an Orancge SPV M2000 off Ebay from the UK, have unlocked it and it works well with my T-mobile simcard. But since it came loaded with the original Orange ROMS...I have had no luck trying to configure the MMS/GPRS settings on it. Tried every configuration found here on this site as well as other google sites, and even called Tmobile customer care rep for a walk-through. They didn't tell me anything new from what I've already found here, however, no joy sending an MMS at all
I have considered upgrading my extROM from Xelencins Tmobile for WIZARD ROM just to get the Customization settings. But I'd rather not do that since I am no pro at upgrading and don't wanna screw up my device if I can help it.
Can you tell me how you configured your MMS?GPRS settings to seamlessly work ? Mine just says "sending" forever and then times out and never sends it in the end
Please, any tips will do, thanks in advance...
Loids
Hi,
My Artemis is got a strange problem
Its from O2 - Orbit called...
When I'm inserting Orange, Vodafone sim cards I get the error - Sim invalid - fine.. that's means is locked
With O2 is searching for a network but is searching for ever...can't find anything.. when I'm going in Network settings and select manual is saying something about Cannot read setting from network...
With Virgin/Tmobile sim card is finding OK the network and connecting to it but cannot make any phone calls or receive.....
Has anyone had a similar problem? I have tried to send it back to O2 but said they will send me send me a new one... they sent it but I never got it... it got lost in post etc... they didn't ask me to send the faulty one first... I contacted them a lot of times but they don't want to send me another one so I'm stuck with this faulty one.. I have reinstalled windows mobile 5 then upgraded to 6 but I have the same problem...
Did you try out the simcard in another device/phone? If it still fails then just ask for a new one.
yes I tried that sim card and works fine in another phone
also I tried lots of simcards in the xda but none works
I do have somewhat a similar problem. I am using an O2 SIM card on the orbit. A number of times the phone keeps looking for the network. Initially I used to wonder whethe rthe signal is weak - but if I soft reset it (and sometimes takes a couple of times), it finds the network (all bars in the signal) and works OK.
I have changed roms and it hasnt helped.
Since both of you are using the O2 Orbit I guess it must be something with the device. Any chance of finding out when your devices were manufactured?
i have the same problem with htc p3300 - have got signal with some of my sims, but can't make a call - what coul this be? I have 2 devices with these faults!!!
Hi,
I have exactly the same problem on my XDA orbit. O2 and orange sims, just keeps searching for a network with vodafone and t-mobile getting a signal but not allowing calls.
I thought that the phone was locked so I used the IMEI-check web site to download the unlock codes etc. This appeared to run normally, but made no difference to the operation of the phone.
I've done hard and soft re-sets but these make no difference either. The device has rom 3.4.206.2WWE (dated 4/18/07) installed on it and I would need some advice on what to change it to and how to change it.
Thanks for any help that anyone can come up with.
Blocked?
Try updating\upgrading radio ROM. If that does not work then I can only think that the phones have been blocked\barred by the network provider. Try calling them and asking them.
I have been informed that if your orbit is still on contract then it is still under warranty even if it is 2+ years old.
Recurring 8525 problem since upgrading to WM6 ROM (AT&T version). The phone will freeze completely (clock doesn't advance, screen and buttons and keyboard don't accept input, display freezes at on or off). When restarted by soft reset, the phone will frequently come back up with no GSM. When that happens, sometimes if I remove the battery and leave the phone off for a few hours then GSM will come back and will work for a while and then lock up again.
When it comes back with GSM service all of the network logon info for GPRS, my Wi-Fi networks with their auth info is gone.
Also email accounts are gone from the account picker and can't be re-created with the same names even though they have completely disappeared. I assume the settings are still in the registry but accounts just aren't showing. One account still shows on the Today screen, but isn't in the account picker.
A hard reset "fixes" things for a while. I've experimented with only installing a few of the most necessary 3rd party apps, without finding any "smoking gun" program that's causing problems. I've also re-seated the SIM card multiple times. I'm thinking it might be a hardware problem.
Today I flashed the radio to 1.54 and it has worked for a couple of hours without needing to be reset.
I'd be interested to hear what possible diagnostic paths I should look at before I call AT&T and begin the rigmarole required by tech support. Anyone with a very similar situation?
Thanks in advance.
I'm having the same problem. I was thinking of going to AT&T to get a new SIM, thinking that was the problem. Any solution yet?
-Pete
I started having the same problem with mine last week.
Sometimes it locks up, sometimes it gets stuck at the windows logo durring boot, always displays no gsm rom on boot.
Take a look at the how to unbrick thread. no gsm rom msg is one of the types of brick.
I installed hard spl ( already had it actually ). Flashed os, but it didn't help. Flashed GSM and no gsm msg went away. The phone is still acting strangely.
remember, just because the rom came from your carrier DOESNT mean that it doesnt have problems. Alot of people seem to have problems with upgraded rom versions from their carrier and end up either downgrading to previous rom or flashing cooked roms. try the previous rom or another cooked rom and see if that fixes the problem before blaming the hardware. It will save you a major headache trying to troubleshoot something that is working perfectly....
Please remember to do a bit of reading and hard spl your device before going off and bricking your Hermes. 10 minutes of reading might prevent hours, days or weeks of hair pulling, nail biting insanity to find the answer. Cheers.
hello people,
I have my SVP M3100, original from orange spain - but CID unlock to work with portuguese carrier, now I live and work in Hereford UK, and I use a sim from Three and other from Lebara the three sim is to have net on my pc and the lebara sim is to make low cost international call, and i switch many times the sim's to make calls and to have internet, now i have the same problem that you have, i try to upload the HTC original rom that have IPL. BOOTLOADER, SPLASH SCREENS EXTROM GSM, but lock at 12% I try upload ongly radio rom and the same a think that somekind of hardware problem caused by to many sims switch, if any body have one solution please tell me
Sometimes it locks up, sometimes it gets stuck at the windows logo durring boot, always displays no gsm rom on boot."
Same thing happened to me. Tried to reflash original ATT ROM , Radio Only, OS only. Gonna send it for the repair. Phone is not under warranty anymore hope that the price of repair will be less than price of new phone.
BTW, is there any way to remove Hard SPL from the phone?
how much was the price of repair?
Try changing you radio to a new one. i have had the same problems in the past with different radio roms and rom versions. so i am using radio 1.54.30.10 with pdavet roms and have had no isuue.
Ray_jai said:
how much was the price of repair?
Click to expand...
Click to collapse
Got my phone back fixed. They charged me for shipping only $19
only $19!?
What if I don't have ATT anymore?
do you know?
i had the same issue check for my previous posts i think no GSM is a common error there is method flashing himalaya rom on hermes to erase GSM sector.
if you cant find the link PM me .
i hope it solves your problem.
tracylynnt said:
Recurring 8525 problem since upgrading to WM6 ROM (AT&T version). The phone will freeze completely (clock doesn't advance, screen and buttons and keyboard don't accept input, display freezes at on or off). When restarted by soft reset, the phone will frequently come back up with no GSM. When that happens, sometimes if I remove the battery and leave the phone off for a few hours then GSM will come back and will work for a while and then lock up again.
When it comes back with GSM service all of the network logon info for GPRS, my Wi-Fi networks with their auth info is gone.
Also email accounts are gone from the account picker and can't be re-created with the same names even though they have completely disappeared. I assume the settings are still in the registry but accounts just aren't showing. One account still shows on the Today screen, but isn't in the account picker.
A hard reset "fixes" things for a while. I've experimented with only installing a few of the most necessary 3rd party apps, without finding any "smoking gun" program that's causing problems. I've also re-seated the SIM card multiple times. I'm thinking it might be a hardware problem.
Today I flashed the radio to 1.54 and it has worked for a couple of hours without needing to be reset.
I'd be interested to hear what possible diagnostic paths I should look at before I call AT&T and begin the rigmarole required by tech support. Anyone with a very similar situation?
Thanks in advance.
Click to expand...
Click to collapse
I've got exact the same symtoms. No GSM, network and auth settings gone, opera registration lost etc. It started a few days a go, in the beginning I had a working GSM most of the time, but it became less and less and now it doesn't have service at all anymore.
Currently device information shows:
ROM version: K's Rom v1.21
ROM date: 10/03/07
Radio version: NONE
Protocol version: NONE
Model No.: HERM300
IMEI: <empty>
Does anyone know a permanent solution?
I have the SAME PROBLEM!
I was about to get radio to work 3 days ago, and now the radio says none.
it's like the radio removed itself.
ok this doesn't make sense, I used the hima rom to remove the radio.
and now the radio is back! wtf?
Hm I tried everything but I can't seem to reflash the radio. About every version I try hangs at 0%. Sometimes when I flash from SD card it hangs at arount 10%.
Tried different SPL versions as well
Damn you radio!!!
BTW, I have no idea what they did to my phone there, but after returning from the AT&T Repair center the Call timer was zeroed and Device ID is now different from what it was before in Skyscape software
Any solutions yet? Im having the same issues.
The reason why Active Sync restarts
For many people the Workaround "not a hack or registry at all" does not work is because of a event based notification that runs the program anytime the time changes. Since your phone updates from the cell tower, it updates the time alot even if by mere seconds well this update runs activesync. Get yourself MemMaid
run it in advanced mode then Jump to Databases then select Notification Queue you will see a list of 3 types of Queues; Time Based, Classic Time Based, and Event based. Go to the event based queue, you should see at the end of this list 3 listing for repllog.exe with the active sync icon. Click on them individualy and read what shows up in the window below put a check mark next to the listing that describes the event as "apprunaftertimechange" it is normaly the last one on list
Also make sure there is no repllog.exe listed in any other queue for a time based event. Leave the other instances of repllog.exe since you still want your device to sync when its connected to the computer. Once you select all events that desribe running repllog.exe after a time change or at a certian time and date press the delete button.
This worked for me on my 8125 and the tilt and if i would of figured this out before i had ATT replace my 8525 i probably would of not got the tilt but lol they gave me tilt free cause all the problems i had with 8525.
let me know if this works for you guys that still see activesync running after the fake server WORKAROUND.
This should work
memmaid is not free but i think its free to try and if all you do with it is fix this problem then great or find a way to register it cause it does help has cool tricks and tweaks
Wow, still no real fixes for this problem, bummer
running memmaid work
running memmaid works and fixes the random start of activesync and once the random start of activesync is fixed the device will not lock up because of activesync this not to say if some other program you may have installed locking you up as well
Hi Guys,
I've just ordered 17 touch pro 2's for work and I'm very impressed with them so far. Absolutely awesome phone. We've just got one issue which is the fact that when the phone is locked (we used centralised policies with exchange) you can't dial from our Parrots. The phone says you must unlock the device to allow bluetooth connection.
Does anyone know a way around this without taking the locks off of the phone which is a big no no. Tested it with a collegue's Omnia and it works fine.
You can replicate this issue by using the Bluesoleil dialer which is what I've been doing for testing.
The parrot receives calls fine, just can't make them he the phone is locked.
TIA.
Same problem
Hi there,
I'm having the same issue for dialling out via bluetooth whilst the phone is locked. The TP2 says it needs to be unlocked before answering the call.
There MUST be some registry key to change to prevent this "feature" ... none of the previous HTC phones I have had have had this problem.
Thanks in advance for any help!
i have the same problem, i installed s2u2, which solves the not being able to dial out when its locked, but it's not the most reliable solution.
i'd rather have it working like it did on my kaiser before this phone.
hope someone helps us out.
I tried out S2U2, but the problem is it's only a keypad lock, so plug the phone in USB for example and you still have full access to the device.
S2U2 also does not stop you sliding out the keyboard and pressing the mail button to read the emails on the phone, so this isn't a solution we can use, it's not even a compromise
Haven't had much luck with HTC support either. They are very quick to respond but don't respond with anything of value.
I just wanted to bump this thread -- I picked up a Tilt2 and have the same problem -- really annoying when trying to dial from the car and having to unlock (didn't have this issue on my Fuze).
Yeah this is the most annoying thing I have ever seen. There must be a way to turn it off. I use Ford Sync and really don't want to have to worry about my phone being locked or unlocked. Seems like this goes against all those phone laws. You are making me look at my phone first to make sure it isn't locked before I can safely dial.
Wish I had found this thread before I went ahead with getting a Tilt 2. Didn't have this problem with my Tilt.
Is this a WM6.5 limitation? Hopefully there is an obscure setting that I'm too stupid to find.
Cheers
... and I was just about to ask on this thread whether or not this was still a problem in WM6.5 but I guess I have my answer now.
It's definitely an issue in WM6.0
I contacted AT&T and they said to contact HTC.
HTC gave me this answer:
Thank you for contacting HTC Technical Assistance Center. I apologize for the length of time it took me to respond to your email. I understand how important it can be to use Bluetooth from your device when your device is locked. I will be happy to address the concern for you.
There is not a setting on your ATT Tilt 2 for enabling Bluetooth when your device is locked. When pairing Bluetooth with your vehicle your device must remain unlocked to use the correct functionality. I would suggest placing your device into hibernation mode and keeping your device in a carrying case.
Hi,
I have upgraded by TP2 with the offical HTC rom for 6.5 and installed my blackberry connect 1.06 client. Now, even with the BB lock enforced, as it was with the TP2 using 6.0 and it is working perfectly handsfree in my CAR, locked or not. Previously the TP2 with the stock 6.0 ROM wouldn't make calls when locked.
If people are reporting here that is didn't work in 6.5, then there must be a registry setting somewhere to enable or disable it.
I am just happy that I can make a call in the car, without having to pull over and unlock my phone.
If someone can give me a hint as to where in the registry to look I can compare some settings?
I have a stock AT&T Tilt-2, I loaded loaded "smartlock 1.7" to autolock the phone at power off and also when "in-call" to avoid random dialing. I don't use the PIN for locking.
I can dial hands free BT in my car and with headsets with no issues, power on/off whatever.
Maybe it'd disabled when locked with the PIN?
I am seeing the same issue with two of my users:
One is using a Verizon Wireless TP2 with MW6.1 stock ROM
The other is using an Unlocked HTC touch Pro 2, on the AT&T wireless network (not a Tilt2) with the HTC WM6.5 ROM upgrade.
The Verizon users is using Sync on his Ford Vehical. The other is using whatever system is in his BMW.
Both can pair with the car's system, but if the phone is locked with a PIN the user is not able to place a call without first unlocking the phone.
Has anyone found any information on this?
If MSVC is an option then it has the ability to dial while password protected.
Just noticed this has been bumped. I upgraded all of our phones to the standard Windows Mobile 6.5 from Vodafone when it came out a month ago and this problem is now resolved you'll be glad to know.
I've got 25 handsets currently working fine with no real issues. All the niggles that I had have gone away with 6.5 so it's definately worth the upgrade.
6.1 was screwed and no use with handsfree dialing if you use windows lock which we enforce on our exchange server.
Seems like every provider is a little different.
I have the AT&T Tilt 2 which came with WM6.5, AT&T support claims its a Microsoft and HTC problem. HTC claims its a Microsoft problem.
Anyone have a good support link to Microsoft to get this problem resolved?
Can someone with a working 6.5 rom please post the following registry info to see if there is a way to enable the bluetooth dialing on the roms that are not working?
HKLM\Software\Widcomm\General
When you get the unable to dial message it puts a new key in there called DontAskHfpCallFailOnDeviceLock and I figure that the bypass might be in this same area.
Registry
Here is everything under the BTConfig\General section.
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\BTConfig\General]
"StackMode"=dword:00000001
"DeviceName"="HTC-ST7377"
"BDAddr"=hex:\
00,23,76,37,a9,89
"BlockBTIfHopper"=dword:00000001
"SendCompressedTelProperties"=dword:00000001
"UsePocketPCName"=dword:00000000
"UnnamedDeviceName"="<No Name>"
"UartPriority"=dword:00000096
"TransmitPriority256"=dword:00000098
"SuspendWithScoConnected"=dword:00000001
"SuspendTimeout"=dword:00001388
"SndPriority"=dword:0000009b
"SecurityType"=dword:00000002
"SCODelayTime"=dword:000007d0
"ReceivePriority256"=dword:00000097
"RadioInitLibrary"="BRCMInit.dll"
"PowerControlLibrary"="Serial_BTUR_DM.Dll"
"PCRemoteAutoConfig"=dword:00000001
"OriginalAudioDriver"="wavedev.dll"
"KeepStackLoaded"=dword:00000001
"EnableAFH"=dword:00000001
"DiscoverableTimeout"=dword:0000003c
"DeviceInactivityDuration"=dword:0000003c
"ConnectRelatedDefault"=dword:00000000
"BIPEnabled"=dword:00000001
"AFHAvoidedChannels"=dword:00000014
black88mx6 said:
Can someone with a working 6.5 rom please post the following registry info to see if there is a way to enable the bluetooth dialing on the roms that are not working?
HKLM\Software\Widcomm\General
When you get the unable to dial message it puts a new key in there called DontAskHfpCallFailOnDeviceLock and I figure that the bypass might be in this same area.
Click to expand...
Click to collapse
erenken said:
Here is everything under the BTConfig\General section.
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\BTConfig\General]
"StackMode"=dword:00000001
"DeviceName"="HTC-ST7377"
"BDAddr"=hex:\
00,23,76,37,a9,89
"BlockBTIfHopper"=dword:00000001
"SendCompressedTelProperties"=dword:00000001
"UsePocketPCName"=dword:00000000
"UnnamedDeviceName"="<No Name>"
"UartPriority"=dword:00000096
"TransmitPriority256"=dword:00000098
"SuspendWithScoConnected"=dword:00000001
"SuspendTimeout"=dword:00001388
"SndPriority"=dword:0000009b
"SecurityType"=dword:00000002
"SCODelayTime"=dword:000007d0
"ReceivePriority256"=dword:00000097
"RadioInitLibrary"="BRCMInit.dll"
"PowerControlLibrary"="Serial_BTUR_DM.Dll"
"PCRemoteAutoConfig"=dword:00000001
"OriginalAudioDriver"="wavedev.dll"
"KeepStackLoaded"=dword:00000001
"EnableAFH"=dword:00000001
"DiscoverableTimeout"=dword:0000003c
"DeviceInactivityDuration"=dword:0000003c
"ConnectRelatedDefault"=dword:00000000
"BIPEnabled"=dword:00000001
"AFHAvoidedChannels"=dword:00000014
Click to expand...
Click to collapse
erenken,
Thanks for the info. The only item different on my 6.5 Tilt2 is that I also have a key "DontAskHfpCallFailOnDeviceLock"=1. Sounded very promising.
Unfortunately, changing this key to 0 and even deleting it doesn't make a difference: I still cannot dial via bluetooth while the phone is locked with a pin. I tried these changes both with and without a soft reset between.
mnunes:
Were you able to find a fix for this? I am in the same boat.
DaBody1 said:
mnunes:
Were you able to find a fix for this? I am in the same boat.
Click to expand...
Click to collapse
No, so far no luck. I can't say I've been looking very hard, though. It's one of those things I've started to learn to live with, as annoying as it is.
hi;
need help with my htc s621, was using it in Vancouver/ Canada;
couple of mounts ago used a service here to unlock it and was able to use it in Iran while I am staying;but with some problem;
on regional/Locale there is no Iran in the country list, there is problem that I think it is related to it;
when I make a call using the keypad, the call will be ended so it won't make a call, but if i save the number into the phone book and call the number from there; then it works, to mention that I changed the locale to Sweden, because this way at least i can make a call from phone book, and when I get a call can not return the all using the number, because it will add the country code to the number, so I have to enter into phone book and remove the country code then be able to use it.
anyway I can make this work?
some kind of ROM update ?
I have searched many local shops here, but there are other models of htc around but not excalibur to get some help;
appreciate any help;
Welcome to forums
have a deep read here:
http://forum.xda-developers.com/showthread.php?t=537151
Reflashing to a newer ROM could help your problem (which I don´t understand quite well)
Good luck,
bluesky88 said:
hi;
need help with my htc s621, was using it in Vancouver/ Canada;
couple of mounts ago used a service here to unlock it and was able to use it in Iran while I am staying;but with some problem;
on regional/Locale there is no Iran in the country list, there is problem that I think it is related to it;
when I make a call using the keypad, the call will be ended so it won't make a call, but if i save the number into the phone book and call the number from there; then it works, to mention that I changed the locale to Sweden, because this way at least i can make a call from phone book, and when I get a call can not return the all using the number, because it will add the country code to the number, so I have to enter into phone book and remove the country code then be able to use it.
anyway I can make this work?
some kind of ROM update ?
I have searched many local shops here, but there are other models of htc around but not excalibur to get some help;
appreciate any help;
Click to expand...
Click to collapse
Hi,
I am also in Vancouver although my phone is a T-Mobile Dash that I got on eBay. You really have a different problem here. I assume that you are using an Iranian SIM card when in Iran and not your Rogers/Fido SIM.
Another guy I work with has a Rogers s621 and even though I unlocked and flashed his ROM for him (originally to the Kavanna 6.1 and now to the EVO 6.5 ROM) he had trouble on trips to China with his China Mobile SIM which itself needed to be unlocked to use it. He ended up buying a phone over there instead.
I assume you are still using the Rogers 6.0 ROM, which is better than the T-Mobile but far behind either of the two I listed above. I would flash to Ookba's 3VO ROM, it is really great and runs beautifully. But follow the direction to the letter, don't skip any steps. I have no idea if it will solve your particular problem, but even if it won't you'll be a lot happier with the phone using it here in BC.
Here is the link to the ROM.
http://forum.xda-developers.com/showthread.php?t=523718
Thanks for the replies guys;
I will do some reading and will upgrade to see if it will become better or not;
yes I still have the Rogers 6.0 ROM; and use an Iranian SIM card;
I wonder if I upgrade and then some problem occurs is it possible to downgrade to what I have, perhaps a way to backup the ROM I have.
Thanks
As long as you follow the instructions on my previous post al should be ok, but in case it fails you can always go back and install another ROM, but believe me if you install any new ROM (6.1 or 6.5) you´ll be so happy that you won´t want to go back
OK;
I did install the new ROM (EVO 6.5 ROM);
it is very nice, I like it but the name of my country Iran is missing in this version also,
by the way I believe this ROM is application unlocked, I wonder why I can not install any application on it;
I searched online and found couple of free apps fo wm 6.5 but it won't be installed. I have not got any error or something.
some of the apps will go half and some up to the end but I don't find it anywhere.
any idea why?
if anyone has installed an application on htc s621 using same ROM please provide a name and a link to download if possible.
appreciate your help.
bluesky88 said:
OK;
I did install the new ROM (EVO 6.5 ROM);
it is very nice, I like it but the name of my country Iran is missing in this version also,
by the way I believe this ROM is application unlocked, I wonder why I can not install any application on it;
I searched online and found couple of free apps fo wm 6.5 but it won't be installed. I have not got any error or something.
some of the apps will go half and some up to the end but I don't find it anywhere.
any idea why?
if anyone has installed an application on htc s621 using same ROM please provide a name and a link to download if possible.
appreciate your help.
Click to expand...
Click to collapse
I don't know if this will help, or whether you have already tried it. You would probably have to do this while in Iran with the Iranian SIM card in the phone. Try entering your settings menu, All Settings > Phone > More > Networks > Menu > Preferred Networks. Scroll down to see if your Iranian network is shown with all the other international choices.
I have no idea how this list is generated, I assume it is by Rogers/Fido here in Vancouver. But you may have a political problem on your hands rather than technical. Are the sanctions against Iran reaching to some organization of cellular providers and the Iranian carriers are being blocked by them from being on the list? I don't know the answer, you would know a lot more about what is restricted in Iran (from within or without) than I would.
In any case, good luck.
OK; Here is what append with my phone;
I upgraded to 3VOLUTION series to see if the dialing problem will be solved or not, everything was OK after installation no errors or something, but as for the calling, as my phone had problem calling out using keypad, now this time after upgrading to wm6.5 my phone could not dial from phone book either,
so practically useless phone, it could only receive calls.
I searched for a solution online , did not find any answer, looked around phone shops here in my city, until I found a guy that said he can make it work, he had a box so in less than 20 minutes did something and phone start working properly, I can make a call from keypad and phone book no problem,
and in the location status the country of Iran is not listed either I am not sure what he did using the box.
I did asked the guy if I upgrade or downgrade WM can the same thing happen again, he was not sure.
I am thinking of downgrading to 6.1 since there are not much application found for 6.5.
but I don't want to pay the guy again for the same thing.
does anyone know of this things?
what he actually did with the box that can not be done without it?
appreciate any help