First off... I did search all the threads and could not find any relevant information for the dash. I have the WM 6.1 ROM by Kavana.
http://wiki.xda-developers.com/index.php?pagename=HTC_Excalibur_WM61tzones
I tried following the instructions in that wiki to configure my MMS settings for T-mobile but when it says:
# Scroll to MMS
# Menu > Settings > Menu > MMSC Settings
I do not have menu item "settings" listed in my mms menu... I set it up before on my other phone but I cannot get to the page where I input that configuration info. Someone please help?
Thanks.
My apologies... the menu directory structure was not stated correctly in the wiki, i found the submenu which you can input the information. Mods, you may delete this thread if you wish.
hmm... it still says error synrchonising when i try to send/receive... i must be doing something wrong still...
put a "." in your username and password it will still say error but you will get your MMS's working
Related
ive lost a weekend messing around with these different roms and although they look and run realy nice, untill one of you genius's make a rom for the tmobile mda mail im going to have to go back to my [email protected] tmobile 6.0 rom.
issues with email trying to use wifi, when these phones have no wifi!
issues with keypad mapping
and even after messing with settings and trying various cab files still no mms working.
there must be a uk guru out there??
Which ROMS have you tried?
I do not think I am understanding what you are saying. The T-mobile Dash/Excalibur has wifi, and wifi works in all of the ROMS i have tried including the stock t-mobile one.
You may have to configure some options in regard to internet/data and mms. Have you done any configuration under the Settings -> Connections -> GPRS menu? Each time you flash your phone, you have to reconfigure these settings.
Anyhow, I am not sure what you mean by the "tmobile mda mail." If this is a completely different device then the T-mobile Dash/Excalibur, then you have posted in the wrong forum; and I am surprised any of the ROMs on this forum even installed in the first place!
ive tried kavana 080307 and 080308.
tmobile mda mail has NO wifi! its like the dash in every way except this. tmobile uk must be tight wads.
subsequently email tries with gprs for a few seconds then goes to try wifi (get double arrow symbol in top right) then unsupprisingly no email.
i have configured gprs and internet explorer works (quite well infact).
http://www.manuals.t-mobile.co.uk/manual.asp?manualid=1866
That is bizzare. Is it possible to cook a ROM without wifi drivers? Sombody in the 6.1 thread said that they got their wing to work with it, perhaps they just dont use it for e-mail then. Do any of the other roms work with email? It would be a shame to have to downgrade to the stock tmobile ROM.
tell me about it, i can live without mms but not without email
In the meantime, you should try this:
http://forum.xda-developers.com/showthread.php?t=354126
If you need help installing, just give me a shout It can be a real pain for the first time without the nice wizard that comes with the new 6.1 ROMs.
NorseLaQuet said:
In the meantime, you should try this:
http://forum.xda-developers.com/showthread.php?t=354126
If you need help installing, just give me a shout It can be a real pain for the first time without the nice wizard that comes with the new 6.1 ROMs.
Click to expand...
Click to collapse
cheers mate your a star, quite a few pages reading there tough so here goes
along with this-----UK settings----
Setting up your connection
1. Select the Start menu
2. Scroll to and select More…
3. Scroll to and select Settings
4. Scroll to and More…
5. Scroll to and select Data Connections
6. Pushing the joystick left or right, scroll through the profiles listed under Internet connection
If you see the profile T-Mobile Internet or T-Mobile GPRS (Web) listed, leave either one displayed in the
box then press Home to return to the main menu. You now need to skip the next steps and go to the
instructions Setting up your Picture Messaging profile below.
If neither are listed, select Menu and follow the remaining instructions below to set up an internet
connection
7. Select Edit Connections
8. Scroll to and select GPRS Connections
9. Select Menu.
10. Scroll to and select Add
11. In the box Description enter T-Mobile Internet
12. Scroll to and select Connects to
13. Scroll to and select MMS Network
14. Scroll to Access point and enter general.t-mobile.uk
15. Scroll to User name and leave blank
16. Scroll to Password and leave blank
17. Select Done
18. Press the Home key
Setting up your Picture Messaging profile
1. Select the Start menu
2. Scroll and select More
3. Scroll to and select Configurations
4. Scroll to and select MMS Settings
5. Select Menu
6. Select MMSC Settings
7. Press Menu
8. Select New
9. In the Name field enter T-Mobile MMS
10. Scroll to MMSC URL and enter http://mmsc.t-mobile.co.uk:8002
11. Scroll to WAP Gateway and enter 149.254.201.135
12. Scroll to Port and enter 8080
13. Scroll to and select Connect via
14. Pushing the joystick left or right scroll to and select The Internet
15. Select Done
16. Scroll to T-Mobile MMS
17. Press Menu
18. Scroll to and select Set as Default
19. Press the Home key
Your phone is now ready to send picture messages.
I've tried the above settings for my Dash which I'm using in the UK and still no luck
i used these setting first, then modded them with the above
cheers burnsey but I get an error copying the file. Its connected via active sync and I'm using the most recent htc rom.
No idea why
EDIT - installed on reboot, GPRS & MMS seem to be working at last.
First let me say this was hard work to figure out! THANKS to KAREEM FOR THE HELP!!!
OK this is how to get wap and mms on the HTC VOGUE on metro!!!!
please sticky!!!!
WAP
1: Check your Windows\startup folder for "HTC_CM_Guardian.lnk", which is a shortcut to Windows\HTC_CM_Guardian.exe. If the shortcut exists delete it. If not then you probably have a newer Sprint ROM which doesn't have the shortcut to launch that application. It is still launching it in some other way however and I have not been able to figure it out from searching forums and the web. The general consensus is to replace the file with a dummy file that I've attached (extract from the zip). Download the attached file and replace "Windows\HTC_CM_Guardian.exe" with the dummy file which will prevent it from running.
NOTE: This file is what resets your Sprint connection to its default settings despite editing these settings. Disabling this file by deleting or replacing it is critical. You may need to use a program such as Resco File Explorer or another File Explorer utility to overwrite/delete/rename Read-Only or ROM files.
2: Rename the following files and folders:
Windows\iota.exe ---> windows\iotaOLD.exe
Windows\iotaconf.txt ---> windows\iotaconfgOLD.txt
Program Files\IOTA ---> Program Files\IOTAOLD
NOTE: renaming the IOTA folder is probably all that is needed however I found the files as well and renamed them for good measure and haven't had a problem.
3: Open your phone and enter ##778#, select "EDIT" and enter your unlock code.
4: Set the following values:
M.IP Settings:
MIP_MODE = Simple IP Only
M.IP Default Profile:
NAI = [email protected]
Home Address = 0.0.0.0 (just delete the values and save)
Primary HA Address = 0.0.0.0 (just delete the values and save)
Secondary HA Address = 0.0.0.0 (just delete the values and save)
Security:
HDR AN AUTH User Id = [email protected]
PPP USER ID = yourtendigitphonenumber[email protected]
PPP PASSWORD = metropcs
5: Goto Connections and delete any existing connections and setup a new one using the following settings:
Number to dail = #777
Username: [email protected]
Password: metropcs
Domain: (Leave Blank)
Select Proxy Settings and enter the following values:
wap.metropcs.net port:3128 (http)
wap.metropcs.net port:3128 (wap)
wap.metropcs.net port:443 (secure wap)
wap.metropcs.net port:3128 (socks)
6: Back in the "Connections" screen where you have two tabs at the bottom of the screen of "Tasks" and "Advanced", go to Advanced, click on "Select Networks" and select the name of the connection you just setup.
Example if you leave as Sprint then choose that one as your internet connection and do it for both settings.
MMS
MAKE SURE YOUR WEB IS WORKING PROPERLY (ABOVE INSTRUCTIONS) AS YOU CAN'T HAVE MMS WITHOUT WORKING INTERNET!!!!!
Remove/Uninstall any existing MMS composer you have attempted to setup. Also a good idea to remove any registry keys it may have created that are left behind after the uninstall.
1: Install Arcsoft MMS version 5.0.70.24 from Verzion.
2: Open your Messaging and click on the SMS/MMS option.
3: Click on "Menu" and select "MMS Options" then select the "Servers" tab.
4: Add a new server with the following settings:
Server Name: metropcs
Gateway: wap.metropcs.net
Port number: 3128
Server address: http://mms.metropcs.net:3128/mmsc
Connect via: SELECT EITHER THE CONNECTION YOU SETUP ABOVE OR "The internet"
Send limit: 399K
5: Click "Done" and then set the new server as default.
6: Using a Registry Editor edit the following values:
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader]
DELETE KEY -> "X-VzW-MDN"
ADD STRING -> "X-metropcs-MDN"="XXXXXXXXXX" ( Insert your 10 digit phone Number )
ADD STRING -> "X-DEVICE-MIN"="1XXXXXXXXXX" ( Insert your 10 digit phone Number WITH the 1 in front of it )
Code:
http://rapidshare.com/files/166154036/HTC_VOGUE_METRO_WEB_MMS_SETTINGS.rar.html
Very Useful.
Stickied.
Files uploaded.. if some one can do mirrors please?
PLEASE LET ME KNOW HOW USEFUL THIS IS TO YOU ALL. AND if you have any questions please ask.
Good work....very useful
DumbDumb said:
3: Open your phone and enter ##778#, select "EDIT" and enter your unlock code.
Click to expand...
Click to collapse
How does one obtain the unlock code?
question
hey can anyone tell me where in los angeles can i get touch vogue flashed to metro.. im tired of dealing with these people at the metro stores...
whackatak said:
How does one obtain the unlock code?
Click to expand...
Click to collapse
Your unlock code is carrier specific. but try 000000
clifford said:
hey can anyone tell me where in los angeles can i get touch vogue flashed to metro.. im tired of dealing with these people at the metro stores...
Click to expand...
Click to collapse
I dont know about LA but in the bay area there are plenty of people...check out craigslist
I have tried the setting and still can't get the internet. Keeps coming up saying username and password is wrong.
do you know the settings for t-mobile
thanks for this
does anyone know the settings for Verizon?
rascal75 said:
I have tried the setting and still can't get the internet. Keeps coming up saying username and password is wrong.
Click to expand...
Click to collapse
Quick question, do you have internet access on your billing/account? If the information is entered correctly and exactly as posted, it will work as long as you pay for internet on your account.
Search HowardForums For more info.
Thank you!!!
Works great - it was a lot of work just getting someone to flash it correctly, and then getting everything to work right; I can't imagine what you must have gone through figuring out these settings!!! I thank you and my wallet thanks you!
Thank you
Nice - always enjoy the support from members in this forum.
Great Info, but needs file shared again
DumbDumb said:
First let me say this was hard work to figure out! THANKS to KAREEM FOR THE HELP!!!
OK this is how to get wap and mms on the HTC VOGUE on metro!!!!
please sticky!!!!
WAP
1: Check your Windows\startup folder for "HTC_CM_Guardian.lnk", which is a shortcut to Windows\HTC_CM_Guardian.exe. If the shortcut exists delete it. If not then you probably have a newer Sprint ROM which doesn't have the shortcut to launch that application. It is still launching it in some other way however and I have not been able to figure it out from searching forums and the web. The general consensus is to replace the file with a dummy file that I've attached (extract from the zip). Download the attached file and replace "Windows\HTC_CM_Guardian.exe" with the dummy file which will prevent it from running.
NOTE: This file is what resets your Sprint connection to its default settings despite editing these settings. Disabling this file by deleting or replacing it is critical. You may need to use a program such as Resco File Explorer or another File Explorer utility to overwrite/delete/rename Read-Only or ROM files.
2: Rename the following files and folders:
Windows\iota.exe ---> windows\iotaOLD.exe
Windows\iotaconf.txt ---> windows\iotaconfgOLD.txt
Program Files\IOTA ---> Program Files\IOTAOLD
NOTE: renaming the IOTA folder is probably all that is needed however I found the files as well and renamed them for good measure and haven't had a problem.
3: Open your phone and enter ##778#, select "EDIT" and enter your unlock code.
4: Set the following values:
M.IP Settings:
MIP_MODE = Simple IP Only
M.IP Default Profile:
NAI = [email protected]
Home Address = 0.0.0.0 (just delete the values and save)
Primary HA Address = 0.0.0.0 (just delete the values and save)
Secondary HA Address = 0.0.0.0 (just delete the values and save)
Security:
HDR AN AUTH User Id = [email protected]
PPP USER ID = [email protected]
PPP PASSWORD = metropcs
5: Goto Connections and delete any existing connections and setup a new one using the following settings:
Number to dail = #777
Username: [email protected]
Password: metropcs
Domain: (Leave Blank)
Select Proxy Settings and enter the following values:
wap.metropcs.net port:3128 (http)
wap.metropcs.net port:3128 (wap)
wap.metropcs.net port:443 (secure wap)
wap.metropcs.net port:3128 (socks)
6: Back in the "Connections" screen where you have two tabs at the bottom of the screen of "Tasks" and "Advanced", go to Advanced, click on "Select Networks" and select the name of the connection you just setup.
Example if you leave as Sprint then choose that one as your internet connection and do it for both settings.
MMS
MAKE SURE YOUR WEB IS WORKING PROPERLY (ABOVE INSTRUCTIONS) AS YOU CAN'T HAVE MMS WITHOUT WORKING INTERNET!!!!!
Remove/Uninstall any existing MMS composer you have attempted to setup. Also a good idea to remove any registry keys it may have created that are left behind after the uninstall.
1: Install Arcsoft MMS version 5.0.70.24 from Verzion.
2: Open your Messaging and click on the SMS/MMS option.
3: Click on "Menu" and select "MMS Options" then select the "Servers" tab.
4: Add a new server with the following settings:
Server Name: metropcs
Gateway: wap.metropcs.net
Port number: 3128
Server address: http://mms.metropcs.net:3128/mmsc
Connect via: SELECT EITHER THE CONNECTION YOU SETUP ABOVE OR "The internet"
Send limit: 399K
5: Click "Done" and then set the new server as default.
6: Using a Registry Editor edit the following values:
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader]
DELETE KEY -> "X-VzW-MDN"
ADD STRING -> "X-metropcs-MDN"="XXXXXXXXXX" ( Insert your 10 digit phone Number )
ADD STRING -> "X-DEVICE-MIN"="1XXXXXXXXXX" ( Insert your 10 digit phone Number WITH the 1 in front of it )
Code:
http://rapidshare.com/files/166154036/HTC_VOGUE_METRO_WEB_MMS_SETTINGS.rar.html
Click to expand...
Click to collapse
Dumb Dumb, thanks for the great Info. I have my phone almost there... but the proxy info continues to be dropped. Is there any chance someone can post HTC_VOGUE_METRO_WEB_MMS_SETTINGS.rar again? Please pm me if you can, and I'll share it. Thanks!
DumbDumb said:
First let me say this was hard work to figure out! THANKS to KAREEM FOR THE HELP!!!
OK this is how to get wap and mms on the HTC VOGUE on metro!!!!
please sticky!!!!
WAP
1: Check your Windows\startup folder for "HTC_CM_Guardian.lnk", which is a shortcut to Windows\HTC_CM_Guardian.exe. If the shortcut exists delete it. If not then you probably have a newer Sprint ROM which doesn't have the shortcut to launch that application. It is still launching it in some other way however and I have not been able to figure it out from searching forums and the web. The general consensus is to replace the file with a dummy file that I've attached (extract from the zip). Download the attached file and replace "Windows\HTC_CM_Guardian.exe" with the dummy file which will prevent it from running.
NOTE: This file is what resets your Sprint connection to its default settings despite editing these settings. Disabling this file by deleting or replacing it is critical. You may need to use a program such as Resco File Explorer or another File Explorer utility to overwrite/delete/rename Read-Only or ROM files.
2: Rename the following files and folders:
Windows\iota.exe ---> windows\iotaOLD.exe
Windows\iotaconf.txt ---> windows\iotaconfgOLD.txt
Program Files\IOTA ---> Program Files\IOTAOLD
NOTE: renaming the IOTA folder is probably all that is needed however I found the files as well and renamed them for good measure and haven't had a problem.
3: Open your phone and enter ##778#, select "EDIT" and enter your unlock code.
4: Set the following values:
M.IP Settings:
MIP_MODE = Simple IP Only
M.IP Default Profile:
NAI = [email protected]
Home Address = 0.0.0.0 (just delete the values and save)
Primary HA Address = 0.0.0.0 (just delete the values and save)
Secondary HA Address = 0.0.0.0 (just delete the values and save)
Security:
HDR AN AUTH User Id = [email protected]
PPP USER ID = [email protected]
PPP PASSWORD = metropcs
5: Goto Connections and delete any existing connections and setup a new one using the following settings:
Number to dail = #777
Username: [email protected]
Password: metropcs
Domain: (Leave Blank)
Select Proxy Settings and enter the following values:
wap.metropcs.net port:3128 (http)
wap.metropcs.net port:3128 (wap)
wap.metropcs.net port:443 (secure wap)
wap.metropcs.net port:3128 (socks)
6: Back in the "Connections" screen where you have two tabs at the bottom of the screen of "Tasks" and "Advanced", go to Advanced, click on "Select Networks" and select the name of the connection you just setup.
Example if you leave as Sprint then choose that one as your internet connection and do it for both settings.
MMS
MAKE SURE YOUR WEB IS WORKING PROPERLY (ABOVE INSTRUCTIONS) AS YOU CAN'T HAVE MMS WITHOUT WORKING INTERNET!!!!!
Remove/Uninstall any existing MMS composer you have attempted to setup. Also a good idea to remove any registry keys it may have created that are left behind after the uninstall.
1: Install Arcsoft MMS version 5.0.70.24 from Verzion.
2: Open your Messaging and click on the SMS/MMS option.
3: Click on "Menu" and select "MMS Options" then select the "Servers" tab.
4: Add a new server with the following settings:
Server Name: metropcs
Gateway: wap.metropcs.net
Port number: 3128
Server address: http://mms.metropcs.net:3128/mmsc
Connect via: SELECT EITHER THE CONNECTION YOU SETUP ABOVE OR "The internet"
Send limit: 399K
5: Click "Done" and then set the new server as default.
6: Using a Registry Editor edit the following values:
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader]
DELETE KEY -> "X-VzW-MDN"
ADD STRING -> "X-metropcs-MDN"="XXXXXXXXXX" ( Insert your 10 digit phone Number )
ADD STRING -> "X-DEVICE-MIN"="1XXXXXXXXXX" ( Insert your 10 digit phone Number WITH the 1 in front of it )
Code:
http://rapidshare.com/files/166154036/HTC_VOGUE_METRO_WEB_MMS_SETTINGS.rar.html
Click to expand...
Click to collapse
I know this is a stupid question but on the the New REG strings do you Include the " In the beginning? of the string?
The file link is down. Can you please repost it? I really need that dummy file...
help
Im trying to get mms on my Sprint htc pro that i flashed to metro i got the web working but when i get to the last part #6 cant find the key "X-VzW-MDN" to delet and where do i put the strings ( "X-metropcs-MDN"="XXXXXXXXXX" ( Insert your 10 digit phone Number )ADD STRING -> "X-DEVICE-MIN"="1XXXXXXXXXX" ( Insert your 10 digit phone Number WITH the 1 in front of it )
help..
xv68k flashed metropcs
Net. check.
MMS out. check
MMS in. no won't download image.
When in Evdo network range, no net. 1x settings only. Is there a cab to enable my gps chip outside of flashing.?
Are there evdo network setting for metro pcs?
I had a problem accessing 3G when installing a new rom. After flashing a few roms and finding out that roms were not the issue, as well as applying a few radio updates and changing radios and a google on the internet, I found out what was the problem. The access point was not set up. Defrost's rom based on cyanogen mod had the massive APN List preloaded, hence I never ran into that problem. However, most roms did not.
Here's how to set it up
Creating a new access point
When you need to add another data connection on your phone, obtain the access point name and settings (including username and password if required) from your mobile operator.
1) From the Home screen, press MENU, and then tap Settings > Wireless & networks.
2) Tap Mobile networks > Access Point Names.
3) On the APNs screen, press MENU and then tap New APN.
4) On the Edit access point screen, enter the APN settings. Tap an APN setting item to edit it.
5) Go to this site and find your mobile network company name
6) Modify the settings as said
7) Press MENU and then tap Save.
You should now have working 3G!
Sources:
http://www.htc.com/www/howto.aspx?id=779&type=1&p_id=312
http://modmyi.com/wiki/index.php/Carrier_APN_Settings
java_saint said:
I had a problem accessing 3G when installing a new rom. After flashing a few roms and finding out that roms were not the issue, as well as applying a few radio updates and changing radios and a google on the internet, I found out what was the problem. The access point was not set up. Defrost's rom based on cyanogen mod had the massive APN List preloaded, hence I never ran into that problem. However, most roms did not.
Here's how to set it up
Creating a new access point
When you need to add another data connection on your phone, obtain the access point name and settings (including username and password if required) from your mobile operator.
1) From the Home screen, press MENU, and then tap Settings > Wireless & networks.
2) Tap Mobile networks > Access Point Names.
3) On the APNs screen, press MENU and then tap New APN.
4) On the Edit access point screen, enter the APN settings. Tap an APN setting item to edit it.
5) Go to this site and find your network
6) Modify the settings as said
7) Press MENU and then tap Save.
You should now have working 3G!
Sources:
http://www.htc.com/www/howto.aspx?id=779&type=1&p_id=312
http://modmyi.com/wiki/index.php/Carrier_APN_Settings
Click to expand...
Click to collapse
I thought you already had a thread on this and a mod said to post this in general?
If you think its apn problem, install the rom it works on and then download apn backup and restore. Use that to backup apns and then when you install a rom you want, use the same app to reinstall the apns you backed up.
Sent from my HTC Desire using XDA App
Good advice, but this doesn't need to be in development.
Sent from my HTC Desire
Moved to General as not development.
I need some help of the experts I recently when from leeDriod 2.3 tom to Neophytex 8.1.4 Rom since then on each reboot I get the sim card change error on each reboot when I tap the error to search for my network T-Mobile UK it is not in the list for some strange reason none of the major networks are in the list that is not Orange, Vodafone, O2. I only get talk talk mobile, virgin, mobile UK and utilitywarehouse who are a reseller.
Any help would be appreciated.
I had this problem when i updated to 2.29.405.9 using the RUU, anyway, the way i solved it was as follows, the settings below are for T-Mobile UK.
1) Select any of the providers in the available list
2) Now go to Settings > Wireless & networks > Mobile networks > Access Point Names and do the following for T-Mobile Internet
Menu > New APN
Name > T-Mobile Internet
APN > general.t-mobile.uk
Username > t-mobile
Password > tm
APN type > default
Menu > Save
4) Now enter the settings below for T-Mobile MMS
Menu > New APN
Name > T-Mobile MMS
APN > general.t-mobile.uk
Username > t-mobile
Password > tm
MMSC > h ttp://mmsc.t-mobile.co.uk:8002 < Make shure you remove the space at the beginning of the link between the h and t
MMS proxy > 149.254.201.135
MMS port > 8080
APN type > mms
Menu > Save
5) Press on each of the APN settings (internet & mms) that you selected in step 1 and press Menu > Delete APN for each of them.
Hope this helps!
MMS not working - ive followed settings from tmbile site below (obviously they are for froyo/gingerbread and im on ICS, but menus are similar)
All settings are per the description but on recieving MMS i just get a text telling me to visit the website with password etc.
I have 2 APNs there (this is how things were after ROM install) I have ensured the one called "picture messaging" has the settings below. The top APN has a dot on the rhs of it if that matters?
TIA
How to configure picture messaging settings on your HTC Desire.
Press the Menu key
Tap on Settings
Tap on Wireless & Networks to select.
Scroll down and tap on Mobile networks
Tap on Access Point Names to select.
Press the Menu key
Tap on New APN
Tap Name then enter T-Mobile MMS select OK
Tap APN then enter general.t-mobile.uk select OK
Tap Username then enter t-mobile select OK
Tap Password then enter tm select OK
Tap MMSC then enter http://mmsc.t-mobile.co.uk:8002 select OK
Tap MMS proxy then enter 149.254.201.135 select OK
Tap MMS port then enter 8080 select OK
Tap APN type then enter mms select OK
Press the Menu key
Tap Save
Press the Home key
Your phone is now ready for use
Bump Anyone?
have you tried sending a MMS? sometimes the settings get automatically configured, when you send a MMS first.
what ROM do you use? maybe MMS is not working yet.