Related
I am new at creating rom but i can´t get the auto install to work.
The first thing i tryed was to write the cab into the config file then into the config_AP. and the files was also shown in the install program but it was not install on the phone.
after a lot of work and tryes did i use the auto install (UCAutorun.rar) and others, did did show up but it did not install the cab.
I was wondering if the cab files is not config to be auto install but i don´t now pleash help.
the files i have tryed is attacst and sorry about my bad english
View attachment ATM.CAB
View attachment config_AP.txt
Have you tried mortscript and silent cab install
HERE
No i have not i will try it out thanks
I have tryet it and it works but, the problems lies in that i wont the cab file to be install with out human touch....
The installation shut be install rigth after the rom has been flash, and will it is install the windows program from htc...
in other words i wont somthing to be run from the config or the config_AP or somthing like that.
i have tryed a lot of things but it dos not install the cab, runne the name but does nothing.
Pleas help
ps the telephone that i am cooking for is the htc diamond and i am using the cooking tool named Kaiserkitchen 1-20-08
In several places in the forums I see DSP manager mentioned as a way to change the sound output from the phone.
It is possible to use the .apk file or flash the .zip file to a stock firmware that is rooted (no other changes), or does it have to be applied to a custom rom?
Ta.
Here you go...
http://www.multiupload.com/7VS5O9KKQ0
Flash as you would a ROM
Hmm, I flashed it and the settings appeared, but they seem to make no difference to the sound output!
Trying via headphones? As I doubt you'd notice from the internal speaker
Other than that I can't help, have no issues personally
Yep, trying via headphones. Seems to make no difference at all. I am running a stock rooted HTC Rom.
Hi, I flashed the DSP from recovery and rebooted. Installation was successful but I can't find the app anywhere in my phone? where do I see it?
SOLUTION
ilya.glants said:
Hi, I flashed the DSP from recovery and rebooted. Installation was successful but I can't find the app anywhere in my phone? where do I see it?
Click to expand...
Click to collapse
For anyone else having this problem:
I didn't find the app I installed so I searched the net for other installation files, and found this:
h ttp://androidforums.com/1446319-post107.html
after I flashed this and rebooted, I got a 'force close' notification for the app. Than I went to /system/app/DSPManager.apk and installed it.
DSP Manager now working great ^^
I did as u said but it gives me a force close and when i try to install it i cant cause its already installed, cant uninstall it either, what should i do ? BTW I'm using AuraxTSense v7.4
did you install the one in the second post as well?
I'm using AuraxTSense 7.0
Yes, first I installed that one, it didn't work, then I installed the other. Is that the problem ? I thought so... so how should I fix it ?
good question..I'm not sure.. try installing the first again
Ok I did it, it removed the app from the app list. What now ? If I try installing it from /system/app it gives an error.
I don't know.. i just rebooted my device and it gave me the force close again. so I did what I did the previous time and ran that app from the location I wrote.. worked like a charm.. again..
ilya.glants said:
I don't know.. i just rebooted my device and it gave me the force close again. so I did what I did the previous time and ran that app from the location I wrote.. worked like a charm.. again..
Click to expand...
Click to collapse
I installed the other zip again, gave me a force close so went to system/app and tried to install it but I can't, only have the options uninstall and launch... No idea why is it working for you and not for me...
EDIT: Ok it works now, had to remove first the odex file and install the other zip again
Update DSP Manager
You can remove the DSPManager.apk file using the terminal emulator.
NOTE: You need to have a rooted phone, Superuser & Terminal emulator.
STEPS
1. Change to root user it is granted super-user permissions.
su -2. Then change to the system app directory.
cd /system/app3. Then move the DSPManager.apk to the tmp directory.
mv DSPManager.apk /tmp4. Move the new apk file to the system app directory.
NOTE: Change to the directory where the DSPManager_1.0.apk is.
cp DSPManager_1.0.apk /system/app5. Reboot the phone.
6. Check in the apps list and the new DSP Manager should be in there.
NOTE: If it all worked you can remove the DSPManager.apk from /tmp
rm /tmp/DSPManager.apk
Attached is the version I use on my rooted HTC Desire.
In order to work, DSP Manager also needs a file called libaudioflinger.so in the /system/lib directory in addition to the apk.
The easy way to get this done is to use an update zip for DSP Manager. Get it from one of these links (all links from this page):
FileServ
MultiUpload
My FTP
doesnt get android to work on my hd 2... i managed it once but since i updated my android build i dont get it anymore...
i think it because i dont have an root folder in the android folder where i can put the files in ????????
if i just install it from the zip via astro explorer it appears in the menue but there is no change in audio ?!?!?!
what can i do ???
B-Man2005 said:
doesnt get android to work on my hd 2... i managed it once but since i updated my android build i dont get it anymore...
i think it because i dont have an root folder in the android folder where i can put the files in ????????
if i just install it from the zip via astro explorer it appears in the menue but there is no change in audio ?!?!?!
what can i do ???
Click to expand...
Click to collapse
I don't think you can install the zip from Astro Explorer because it needs to copy files to the /system partition which is read-only when the phone is booted up. In other words, you must have a rooted phone to do this.
If you do have a rooted phone, then reboot into recovery mode and install the update.zip the usual way.
If you don't have a rooted phone, well that's a whole different story.
i , please help me.
I've installed it via recovery and I made backup with my original needly files: libaudioflinger and libaudio. Then i copied my files back (deleted new files and moved old files) . I restarted my phone and it didn't boot. Just show me the White window (T-mobile)... Can i repair my phone by myself? Please help me and sorry for my english.
maximus rus said:
i , please help me.
I've installed it via recovery and I made backup with my original needly files: libaudioflinger and libaudio. Then i copied my files back (deleted new files and moved old files) . I restarted my phone and it didn't boot. Just show me the White window (T-mobile)... Can i repair my phone by myself? Please help me and sorry for my english.
Click to expand...
Click to collapse
I'm sorry I don't really understand the problem. Normally, installing the update.zip should be all that you need to do. I don't understand why you copied the old files back and were those two files the only files that you backed up?
oxygen has second boot screen until "update-oxygen-1.0.1-signed",so i want to push bootanimation.zip into oxygen rom,i did like this..i built a file under data\local ,then i put the "bootanimation.zip" into the file ,then signed it,but i have always failed,i need somebody's help.......
i am a rookie and i does not know many english words,please forgive me,
What I always do is to open up the .rar (not unzipping it, but really just double click it), and poke around until I find the folder where the bootanimation.zip is.
Then I delete that .zip, and then using WinRar, click "Add" on the top left, and selected your desired bootanimation.zip, all of this WHILE still in the same folder where the original bootanimation was in.
When done, just sign it, then flash it as you would a normal Rom.
eden2812 said:
What I always do is to open up the .rar (not unzipping it, but really just double click it), and poke around until I find the folder where the bootanimation.zip is.
Then I delete that .zip, and then using WinRar, click "Add" on the top left, and selected your desired bootanimation.zip, all of this WHILE still in the same folder where the original bootanimation was in.
When done, just sign it, then flash it as you would a normal Rom.
Click to expand...
Click to collapse
thank you for replying my post~
i have another question ,that is , i did not find "bootanimation.zip " in the oxygen rom ,maybe i did not find it in the right place,but oxygen rom did not have a folder called data/local...
Right, Oxygen seems to be a new breed of ROMs (hence, the no data/local), which I honestly haven't have the luxury of time to try yet (damn, lol).
Anyway, if you searched the oxygen thread, this post would have come up.
Try it and see
It's in /system/media
If you are S-OFF you can just adb push C:\asd\asd\asd.zip /system/media/bootanimation.zip while the phone is running.
Otherwise you need to do it in recovery.
But wm's method is really the easiest way if you want to change your bootanimation before you have flashed an update.
While I'm at it: could you guide me to a thread/site where I can find infos regarding signing zip files? I only found really old threads :S
Thank you.
Eggcake said:
While I'm at it: could you guide me to a thread/site where I can find infos regarding signing zip files? I only found really old threads :S
Thank you.
Click to expand...
Click to collapse
I cannot remember the creator of the program, but I used this thing called autosign.bat, which I got off the xda forum.
I'm sure you can find it around somewhere in the forum.
Eggcake said:
It's in /system/media
If you are S-OFF you can just adb push C:\asd\asd\asd.zip /system/media/bootanimation.zip while the phone is running.
Otherwise you need to do it in recovery.
But wm's method is really the easiest way if you want to change your bootanimation before you have flashed an update.
While I'm at it: could you guide me to a thread/site where I can find infos regarding signing zip files? I only found really old threads :S
Thank you.
Click to expand...
Click to collapse
actually,i did it in this way,first,you need have the program called java, after you download it ,you have to set a java's environment which you can search it by yourself,attention: if you do not know much java languages ,advice you to install it in the default location. second,you need a Auto-sign tool which you can also find it by searching in xda. Then you should unzip the Auto-sign.rar under anywhere you can find it .
After you have done all of these,you can make your own rom !(all of the work below is in the unzipped folder called Auto-sign)
put the rom you have reformed into the folder called "Auto-sign",then ,you need to rename the rom to "update",after that ,double click it the Sign.bat in the folder,wait for awhile,you will get another rom called "update_signed",it is the rom you can flash into your Desire. English is not my mother tongue, if you can not understand what i have said, please reply me with simple and exact words, then, we can communicate with eachother.
On my rooted Defy - how do I install a zip-file??
Like this one;
http://forum.xda-developers.com/showpost.php?p=12426274&postcount=24
install the 2ndinit apk 1.4.2 newer ones wont work with some files
then reboot 2 times.
third reboot: press volume down, when the led is blue.
now choose recovery by pressin vol up or down and power to accept.
then choose costum recovery, and apply zip from sd. choose your file and confirm.
done
hope this answers your question
Thanks, seems simple enough
uh, where do I find 2ndinit.apk
You can find it here.
I know how to install .zip but I have a question. CWM3.1 does not flash some .zip like a baseband or a theme. It says "aborted". I think that the problem is that the file is not signed or something. In CWM2.5.1.8 works but the problem is that CM7 or MIUI changes it to CWM3. So, what should I do?
Thanks!
Works fine, even the mentioned zip-file!
The "issue" is that the latest CWM3.x no longer support "amend scripting" (stored in update-script) and won't apply zip's created with such scripts. Therefore all .zip which where written using the old method should be converted to edify scripting (which use different statements - more details here-).
is there an way to downgrade the 2ndinit? an how-to would be very nice
You can replace the recovery file from /system/bootmenu/recovery/sbin with the one from 2nd init 1.4.2 . The file persimmon should be rwxr-xr-x (755).
nepotu said:
You can replace the recovery file from /system/bootmenu/recovery/sbin with the one from 2nd init 1.4.2 . The file persimmon should be rwxr-xr-x (755).
Click to expand...
Click to collapse
and how do i do that? with rootexplorer? what for do i need the file permission? to change it or to set it after changing the files?
Yup. You can replace it using an app like root explorer. And the file permission should be set up after you copy the file (if you have the wrong file permission it won't work).
EDIT: I haven't tried yet to downgrade it this way but that's what I've read on the forum, therefore I cannot guarantee you it will work.
sry for me being a noob. i found the file named recovery in the folder you mentioned. but have got only the file 2ndinit.apk..... where do i get the recovery file from 2ndinit.apk ?
thank you for your time!
You can unpack it using a tool like Apk Manager 4.9 or simply by using 7zip to extract the files from the apk which is in fact some sort of archive. However as I've mentioned in the previous post I didn't tried to downgrade using this method. All I can say is that I've read here on xda about this method, therefore I cannot guarantee you this will work. I think is better to wait someone with more experience to answer.
As an unexperienced user i think i'll wait for a better solution.
As i read, this problem appears quite often, how come that nobody tried to make a solution for this problem?
Hi,
I am trying to install "V6_SuperCharger_for_Android-Update9_RC5.2.sh.pdf" on my rooted and unlocked arc with .62fw. I have busybox version of 1.19.4 and have the supercharger file on root of sdcard. when i run the script manager and try to run, it says
V6_SuperCharger_for_Android-Update9_RC5.2.sh.pdf
sh:applet not found.
I have the .tar file for busybox v1.18.2 but i am not able to install it.
Please advise.
Rgds,
Rxhy
Remove the .pdf extension of the file and run it again via Script Manager.
try busybox installer from the market
I tried it but dint work.I tried by renaming it to .txt but no luck...
rexhyd said:
I tried it but dint work.I tried by renaming it to .txt but no luck...
Click to expand...
Click to collapse
Delete.pdf
So it ends in .sh
Use script manager to run
Stick a widget on home screen
Sent from my MT15i using Tapatalk
I have done that..uninstalled and again downloaded..but not working..
Am is missing something?
rexhyd said:
I tried it but dint work.I tried by renaming it to .txt but no luck...
Click to expand...
Click to collapse
Your file name should be like
V6_SuperCharger_for_Android-Update9_RC5.2.sh
You must have that .sh file extension
Or better yet, download the RC6.9 version of the supercharger
And don't forget to touch the image above the 'Su' in Script Manager
Have u give the script SU permission?
Sent from my LT18i using xda premium
Hi,
Tried just now..but dint work..
I have busybox v1.18.2 as tar file..how to load it?
Thnx,
RxHy
Thanks...
I have the 6.9 version as well..and my file name ends with .sh after deleting the .pdf.
but i got the same result..applet not found.
"And don't forget to touch the image above the 'Su' in Script Manager"
what is this? I dint notice any Su or image...
Sorry: I got it. The image is for root...
rexhyd said:
Thanks...
I have the 6.9 version as well..and my file name ends with .sh after deleting the .pdf.
but i got the same result..applet not found.
"And don't forget to touch the image above the 'Su' in Script Manager"
what is this? I dint notice any Su or image...
Click to expand...
Click to collapse
First of all, You must be rooted to use the script.
Second, Download ScriptManager from market, free app will do the job.
After installing it,when you rum the app for the first time,it will ask you to "browse as root".You must check the box and then a proceed.You will get some pop-ups and click ok/yes and keep moving till the app gets loaded.
Now, browse to the folder where you have kept the script and open it.
The script manager will open a pop-up and there you must select "run as root" or select "SU" icon and then run the script.
Follow the instructions from the script and then your phone should get SuperCharged!!
Hi,
I was able to install Supercharger finally
I dint find the exact problem..seems there is some issue with the script manager..i totally uninstalled and installed the app almost 12 times..
The process is simple and there is step by step guide on this forum..Really a big THANKS to all the experts there...
Regards,
RxHy
Have to reinstall this script if i upgrade the kernel or rom?
Coolgoly said:
Have to reinstall this script if i upgrade the kernel or rom?
Click to expand...
Click to collapse
If you update the rom then you must reinstall the script.
And for kernel only?
ZipIT and Supercharger V6
Hi,
Can use both ZipIT script and Supercharger together?
I want to increase the Battery performance...
Heres a thing ive been wondering for a while...how does the widget actually work? What does it show?
Sent from my LT18i using Tapatalk