Hi folks:
I've been using Nyditot on my MDA II for a while and I like it a lot, especially for web browsing on landscape mode (way better than portrait).
My only beef with this approach is that the phone application does not show all the numbers on the dial pad when in landscape. Of course, you can compress the screen with Nyditot, but then you lose readability.
Is there any way to have the phone app show like it seems to do in WM2003SE, or is there any other phone app that would show the entire dial pad while in landscape?
Thanks in advance for any help with this.
Fernando
Hi !!
On all new roms, there is the mania interface rotation.
The only problem is when I take my phone from my pocket: sometimes it is in landscape mode and sometimes it in is portrait mode...
Is there anyone here able to make a software that could disable the G-Sensor when the screen is off ?
It will prevent from TF3D rotation when in the pocket
Thx !!
That's an excellent request Judebox
TF3D is long as hell to rotate, so it would be really great to prevent it to rotate in landscape when it's switched off, 'cause it's useless and boring.
how can i simulate keyboard sliding out (without actually opening it) to obtain the landscape state with all programs so that i can switch from portrait view (4all) to landscape (4all) apart from the G sensor.
I have tried all rotation programs ( Gyrator2, changescreen, G-config, G list) and i'm really disappointed they have issues with the phone dialer and with switching to certain programs they return to portrait view even if this program is enabled for rotation by above software.
If i can do what i mentioned above it will be great hack that will resolve many problems
where r the developers
Don´t need a developer for that, a simple search might have yielded the results you are looking for....
Get a registry editor, then change HKLM>System>GDI>Rotation>HideOreintaionUI from 1 to 0. Now you can assign the left hardware key long press action (under Settings>Buttons) to rotate your screen.
edit for not completely reading your post.....
Get a registry editor, then change HKLM>System>GDI>Rotation>HideOreintaionUI from 1 to 0. Now you can assign the left hardware key long press action (under Settings>Buttons) to rotate your screen.
even that doesn't prevent the phone from switching to portrait view specially with the phone dialler
As far as I know, Gyrator2 is currently the best option out there. It doesnt work perfectly in the TF3D interface tabs, but everywhere else, it works pretty well.
Hopefully a better solution will come out soon, cause I agree, this thing should work like an iphone in switching between portrait/landscape modes.
honestly, im using g config and g list and dont have any problems out of it...the only thing i dont like about it is that when im making a phone call itll switch to landscape mode when i put it to my ear bc i never hold the phone str8 up and down...how do i disable it from switching from portrait to landscape while n the dialer screens....other than that, no problems this way...please explain ur problem more in depth and hopefully i can help
hopefully someone can help me with my question tho about how to disable g config and g list from swtiching while the phone dialer screens are opened (during a call mainly)...thanks n adavance
by using registry editor delete "Dialog" string from
HKCU-->Software-->HTC-->HTCSENSOR-->GSensor-->WhiteList
the problem that the "dailog" string is responsible for rotation of other programs than the phone dialer for example u will discover that the favorite page of Opera browser will rotate no more after deleting this string.(and many other things that share this string)
there is another idea but i don't know how to do it through the registry?
By changing the horizontal rotation angle threshold to a minimal angle so you have to put your phone nearly horizontal to obtain landscape view.
meromar said:
there is another idea but i don't know how to do it through the registry?
By changing the horizontal rotation angle threshold to a minimal angle so you have to put your phone nearly horizontal to obtain landscape view.
Click to expand...
Click to collapse
this would be a great idea and if someone could figure that out and make a cab that would be great...a cab that makes it to where u have to have the phone "horizontal" (or nearly that so theres not as noticable of a lag) would be great because thats the only time i need the landscape is when im holding it horizontally...can someone PLEASE help????
Where are the EXPERTS
Gyrator2 can be configured to not switch while making a phone call. My problem is that I couldn't figure out how to get it not to switch in the lock screen. I'm sure that with enough help from the Gyrator experts I could have completely configured Gyrator to work the way I wanted it. Even if Gyrator had worked the way that I wanted it to, there were still issues with returning to portrait view even if I had the phone in landscape. But I believe that this is a known issue with Gyrator and touchflo 3D. But since I have the Tilt2, the easiest solution for me was mapping the PTT button to rotate my screen. At this point in time I don't think there is a perfect bug free solution and there might not be until HTC decides to implement that functionality.
thedon0369 said:
Gyrator2 can be configured to not switch while making a phone call. My problem is that I couldn't figure out how to get it not to switch in the lock screen. I'm sure that with enough help from the Gyrator experts I could have completely configured Gyrator to work the way I wanted it.
Click to expand...
Click to collapse
very easy : run Gyrator menu-->events-->add new event-->choose Orientation-->Edit Event-->(name it as u want)choose Application-->choose >Learn Widow Class-->click on task bar (Modify Event) to get out from Gyrator(but the program still running)-->lock ur screen-->withdraw ur stylus then reinsert it-->the Gyrator come back with ConfettiLockScreen in the application name (u can simply add it as new application for gyrator without doing previous steps.
Don't forget to make Orientation--> Portrait (only)
& Actions-->Rotate screen.
don't forget to promote it to become above rotate line.
meromar said:
how can i simulate keyboard sliding out (without actually opening it) to obtain the landscape state with all programs so that i can switch from portrait view (4all) to landscape (4all) apart from the G sensor.
I have tried all rotation programs ( Gyrator2, changescreen, G-config, G list) and i'm really disappointed they have issues with the phone dialer and with switching to certain programs they return to portrait view even if this program is enabled for rotation by above software.
If i can do what i mentioned above it will be great hack that will resolve many problems
Click to expand...
Click to collapse
WHERE ARE THE GENIUSES
Just got mine, nice and smooth functionality of Touchflo comparing to windows 6.5 on touch hd. I do have a problem, though, Igo does not work in full screen although the function keys are in normal position. It's like the touch is in full screen but the image isn't. That makes impossible entering an address. Any idea, please?
There is an igo thread here but I haven't read through it.
http://forum.ppcgeeks.com/showthread.php?t=88692
That's the one I followed and it works fine.
iulian_paraschiv said:
Just got mine, nice and smooth functionality of Touchflo comparing to windows 6.5 on touch hd. I do have a problem, though, Igo does not work in full screen although the function keys are in normal position. It's like the touch is in full screen but the image isn't. That makes impossible entering an address. Any idea, please?
Click to expand...
Click to collapse
To get it working in native resolution, I have put into my sys.txt the following settings:
[device]
type="HTC Touch Pro 2"
SDCard_dsk_num=7
[rawdisplay]
highres=0
autoconfig=1
driver="gx"
screen_y=800
screen_x=480
Then, I use Dimka 1.25 480x800 skin but it is also working fine with the latest Gurion 480x800 skin as well as with the built-in one.
If you prefer horizontal position - just swap x&y in "screen_?" lines.
If this will not help - just PM me.
I would like to know if anyone here has a cab file or know where to find a cab file to keep the slider from hiding every time the Touch PRO2 is rotated into landscape mode? I know that I like the slider in both portrate as well as landscape, and there are probably more people who would like this as well.