Related
Is there a way to disable the internet passthrough in activesync? I use a remote software that allows me to use my phone on my PC when docked, SOTI pocket controller. So I like being docked at work, however (this is where this question gets weird)... my work has disabled the port to access MSN messenger on our network, I want to be able to sign in from time to time so I thought using my PPC would be great! However the internet passthrough in active sync means that it won't access the MSN messenger port either, because it's using the same network, so if I undock and connect using GPRS I can use messenger, so what I want to do is be docked still but have my device use GPRS internet instead of the passthrough, this way I can sign on to messenger while docked. Does this make sense? Respond if I'm not being clear enough. I have found web versions of messenger that work, it's just too slow for me and gets in the way, if I could use my PPC it would be just perfect! Thanks in advance, it's a weird one so hopefully someone will have a suggestion that will tickle my fancy out there!
I would like to know the answer to this as well. I have GL installed and cannot retrive new messages while my SX66 is docked.
As much knowledge as there is out there, this one seems to have the experts stumped.
Lots of people asking the question on the net and no answers.
I'm surprised no one has replied to this yet.... It's actually pretty easy to fix. Right click the ActiveSync icon in your tray and click connection settings, change "this computer is connected to" from 'the internet' or 'automatic' to work network. Your phone should no longer look for a connection through AS on these settings.
Doesn't work for me. The wireless data connection is immediately terminated on the phone once the USB cable is plugged in, regardless of how the XP ActiveSync software is configured.
That's rather odd, I used to do just that to make my AIM go through my phone rather than the computer while using MyMobiler.
gboybama said:
As much knowledge as there is out there, this one seems to have the experts stumped.
Lots of people asking the question on the net and no answers.
Click to expand...
Click to collapse
have you tried the 'This computer is connected to:' and select 'Work Network', in the Connection settings dialogue box?
edit1: wow, typed this weeks ago, Google chrome saved the page till today...
edit2: on your phone, In connection settings in My Work Network, under the Proxy Settings tab, is 'This network connects to the internet' ticked? try un-ticking it if it is...
Work or "The Internet" it doesn't matter what I select on ActiveSync. It still disables the H on my phone as soon as I connect the USB cable.
For connections on my phone, all I have even in the list of connections is MEdia Net. I can't uncheck Internet there or else I wouldn't get Internet while disconnected.
Despite the fact that my only existing connection on the Settings/Connection page is MEdia Net and that only is set for "Cellular Line (GPRS, 3G)" I still can only access the Internet through my work server when connected to my work desktop.
I noticed the same behavior when syncing via Bluetooth. As soon as the connection with ActiveSync is established, wireless connectivity is shut off.
My apologies for the kick, but if someone knows the aswer, please enlighten me!
I cannot disable the internet pass-through either, not even when I select "Network (work)" in "This computer is connected to" in the Windows Mobile Device Center (The Vista version of ActiveSync).
I have set-up Exchange on my phone, which connects to domain.com. My Exchange server runs in my network, so when I connect the phone it should connect to 192.168.1.2 instead of domain.com. If it would stay on HSDPA, then the connection would remain OK. Because of this, it won't sinc with my PC either, because it keeps hanging on connecting to ActiveSync (of which the server cannot be resolved).
Many thanks to the person who knows the answer!
This thing is a bigger pain than it should be, that's for sure. I think I got it working - simultaneously syncing via Exchange over GSM and locally through USB (obviously not the same items).
In my setup Contacts, Calendar, E-Mail, and Tasks are using the mobile network to connect to our Exchange server's external Push interface. Notes, Mobile Favorites, Files, and OneNote are syncing through USB or Bluetooth (I tried both) when I connect locally.
I'm currently running Vista on this PC so things might be different on XP or Windows 7. On the PC in Windows Mobile Device Center I enabled "Allow data connections on device when connected to PC" and changed "This computer is connected to:" Work Network.
In Windows Mobile, in the connections manager, edit the existing connection. MEdia Net shouldn't have a proxy set and under the Advanced tab click Select Networks - if the "Programs that automatically connect to a private network" is set to My Work Network then make sure and edit the settings to have "This network connects to the Internet" unchecked. Or alternatively, just change the private network to be Media Net as well. That should do it.
On your pc if you open up ActiveSync and go to file>connection settings and make sure "allow wireless connection on device when connected to the desktop" is checked you should be able to keep your mobile internet connection up while still connected to a pc.
1. With my old PDA (Magician) I could browse Internet through my PC using USB cable and ActiveSync. Now, with my Artemis I cannot. Althought it's connected by cable, always tries to go GPRS or EDGE when I open Internet Explorer and go for a web page. What's wrong? (Browsing the web by WiFi goes well, so it's not a problem at home, but there is no wireless LAN in my office.)
2. I can sync my Artemis with PC Outlook software by cable or by Bluetooth without any problem. Would it be possible somehow to sync by WiFi as well? Presumably it would be quicker than Bluetooth.
cheers,
ctibor
For your works PC check what version of Active Sync is installed, I don't have the Orbit but both my HTC Artemis and MDA-CIII will connect and surf the net via a cabled connection - can't comment on sync over Wi-Fi as I have never bothered with it. I find it easier to plug the devices in each night to sync and charge - Mike
ctibor said:
1. With my old PDA (Magician) I could browse Internet through my PC using USB cable and ActiveSync. Now, with my Artemis I cannot. Althought it's connected by cable, always tries to go GPRS or EDGE when I open Internet Explorer and go for a web page. What's wrong? (Browsing the web by WiFi goes well, so it's not a problem at home, but there is no wireless LAN in my office.)
Click to expand...
Click to collapse
You may want to check that Settings>Connections>USB to PC>Enable advanced network funtionality is ticked
victoradjei said:
You may want to check that Settings>Connections>USB to PC>Enable advanced network funtionality is ticked
Click to expand...
Click to collapse
Yes, it IS ticked.
But anyway, thanks.
on device
start>settings>connection>wifi>network adapters
set 'my network card connects to' to 'the internet'
on pc
open activesync
file>connection settings
set 'this computer connects to' to 'the internet'
should be all fine then.
Hi,
Since AS 4.2 came out I have problems to use USB Internet passthrough in Activesync, als AS 4.5 did not solve this problem. I googled around a lot and also searched in xda forums but everyone is giving other instructions, some say this, some say it the other way. It also does not depend on the rom, I had the same problem on the wizard and now also with my TyTN on wm5 and wm6 roms.
So my question is: How to enable USB internet passthrough on ActiveSync 4.5? At the moment my desktop activesync is set to "automatic" in the connection settings, and on my device under Settings->Connections->Connections->Advanced->Select Networks I have "Orange Internet" as the connection which connects to the internet (which has in the proxy settings "this network connects to the internet" enabled). and the work connection is "My ISP" which has no settings at all. I tried to add a new network connection but didn't even know which Modem I have to choose and so I gave this up.
I also tried to set my desktop activesync to either use "Work" or "Internet" instead of automatic but when I try to use Opera, Internet Explorer or any other program like downloading the weather data all programs say that the host or page cannot be found or report a network error.
Can anyone help with this, I'm really very desperate... Cause I also tried to find the correct settings for hours now, but without luck...
Thanks for any help with this subject.
marcelser said:
Hi,
Since AS 4.2 came out I have problems to use USB Internet passthrough in Activesync, als AS 4.5 did not solve this problem. I googled around a lot and also searched in xda forums but everyone is giving other instructions, some say this, some say it the other way. It also does not depend on the rom, I had the same problem on the wizard and now also with my TyTN on wm5 and wm6 roms.
So my question is: How to enable USB internet passthrough on ActiveSync 4.5? At the moment my desktop activesync is set to "automatic" in the connection settings, and on my device under Settings->Connections->Connections->Advanced->Select Networks I have "Orange Internet" as the connection which connects to the internet (which has in the proxy settings "this network connects to the internet" enabled). and the work connection is "My ISP" which has no settings at all. I tried to add a new network connection but didn't even know which Modem I have to choose and so I gave this up.
I also tried to set my desktop activesync to either use "Work" or "Internet" instead of automatic but when I try to use Opera, Internet Explorer or any other program like downloading the weather data all programs say that the host or page cannot be found or report a network error.
Can anyone help with this, I'm really very desperate... Cause I also tried to find the correct settings for hours now, but without luck...
Thanks for any help with this subject.
Click to expand...
Click to collapse
do you use a proxy server for this pass through connection? what activesync partnership do you have setup "Guest" or a Normal one...
First to be able to use passthrough you must be connected to your PC via USB and thus connected to active sync. Active Sync should be fully set-up.
First question;
Can you synchronize your data through Active Sync 4.5.
If yes. Try to tick all the items in the desktop active sync> connections settings. On the space "this computer is connected to" select automatic
second: Can your PC connect to the internet?
If yes open the PC Internet Explorer and try to browse, then, while connected at USB, open Pocket Internet Explorer in your mobile and try to browse. You should be connected to the internet then. Good Luck!!
If still you wouldnt connect there must be wrong on your Active Sync partnership set-up
Two more tips:
1. Start/Settings/Connections/USB to PC - untic
2. http://pdaphonehome.com/forums/552203-post22.html
no proxy
walshieau said:
do you use a proxy server for this pass through connection? what activesync partnership do you have setup "Guest" or a Normal one...
Click to expand...
Click to collapse
I don't use any proxy server for connecting to the internet, my PC is directly connected to a NAT Router, as well as my linux box and my girlfriends computer and all work perfect.
As for the activesync partnership, where do I see the type of my partnership or in other words, what is a "guest" partnership? The only thing I see is that my device is named "WM_marc1" and that activesync items sync perfectly but the internet passthrough won't work.
I hope you can give me further advice with this information. Thanks for you help
docles2002 said:
First to be able to use passthrough you must be connected to your PC via USB and thus connected to active sync. Active Sync should be fully set-up.
First question;
Can you synchronize your data through Active Sync 4.5.
If yes. Try to tick all the items in the desktop active sync> connections settings. On the space "this computer is connected to" select automatic
second: Can your PC connect to the internet?
If yes open the PC Internet Explorer and try to browse, then, while connected at USB, open Pocket Internet Explorer in your mobile and try to browse. You should be connected to the internet then. Good Luck!!
If still you wouldnt connect there must be wrong on your Active Sync partnership set-up
Click to expand...
Click to collapse
My data synchronizes perfectly through AS 4.5 and I have already checked all items in connection settings. Of course my computer is connected to the internet (see reply to walshieau) and honestly IE and pocket IE have nothing to do with internet passthrough, it's all about TCP/IP subnetting, bridging, tunnelling or whatever method AS 4.5 uses for internet passthrough.
Sorry if i am not explicit...but i hope this helps. For my wizard i remember i had to install a reg on the PC. It did some changes to the Active Sync registry.
The bad is that i don't have that reg
marcelser said:
Hi,
Since AS 4.2 came out I have problems to use USB Internet passthrough in Activesync, als AS 4.5 did not solve this problem. I googled around a lot and also searched in xda forums but everyone is giving other instructions, some say this, some say it the other way. It also does not depend on the rom, I had the same problem on the wizard and now also with my TyTN on wm5 and wm6 roms.
So my question is: How to enable USB internet passthrough on ActiveSync 4.5? At the moment my desktop activesync is set to "automatic" in the connection settings, and on my device under Settings->Connections->Connections->Advanced->Select Networks I have "Orange Internet" as the connection which connects to the internet (which has in the proxy settings "this network connects to the internet" enabled). and the work connection is "My ISP" which has no settings at all. I tried to add a new network connection but didn't even know which Modem I have to choose and so I gave this up.
I also tried to set my desktop activesync to either use "Work" or "Internet" instead of automatic but when I try to use Opera, Internet Explorer or any other program like downloading the weather data all programs say that the host or page cannot be found or report a network error.
Can anyone help with this, I'm really very desperate... Cause I also tried to find the correct settings for hours now, but without luck...
Thanks for any help with this subject.
Click to expand...
Click to collapse
hi, I am using wm6(LVSW series, black Series and now Official Dopod release) on my hermes, everytime I can successfully connect to the internet via activesync using whatever program like pie, opera, spb insight, weather update, WML etc.
what I have done is simply unchecked the 'enable advanced network functionality' under start -> settings -> connections ->USB to PC and then plug the usb cable to my pc.
I use activesync 4.5.
hope this help
ctrlaltdel said:
hi, I am using wm6(LVSW series, black Series and now Official Dopod release) on my hermes, everytime I can successfully connect to the internet via activesync using whatever program like pie, opera, spb insight, weather update, WML etc.
what I have done is simply unchecked the 'enable advanced network functionality' under start -> settings -> connections ->USB to PC and then plug the usb cable to my pc.
I use activesync 4.5.
hope this help
Click to expand...
Click to collapse
YES WORKS UNDER VISTA TOO
simply check the 'allow data connections on device when conneted to the pc' under connection settings and then plug the usb cable to pc.
Heres the Fix
I had the same problem and this reg key fixed it for me 100%
Download this file AND RENAME IT TO lspvalue.reg
the double click on the reg file on your PC
Jules
ZaJules said:
I had the same problem and this reg key fixed it for me 100%
Download this file AND RENAME IT TO lspvalue.reg
the double click on the reg file on your PC
Jules
Click to expand...
Click to collapse
That's the one i was talking about, thanks i was going to need it too
Ok followed the procedures. I think anyone of them works. Mine worked by changing on PC activesync to "this computer is connected to: The Internet". Nothing else worked. I had the reg hack from the time of my beloved Wizard!
go to:
start -> settings -> connections -> advanced -> select network
make sure that
"programs that automaticaly connect to the internetshould connect using"
"my work network" and not "my isp"
then go to
start -> settings -> connections -> usb to pc
and make sure to uncheck "enable advanced network functionality"
that should do it
regards
H.S.
hsalah72 said:
then go to
start -> settings -> connections -> usb to pc
and make sure to uncheck "enable advanced network functionality"
that should do it
regards
H.S.
Click to expand...
Click to collapse
on my hp 6828, it doesnt seem to have the usb to pc option/icon.
tried the first part selecting connect to work.
I'm stil haveing a problem. any ideas?
maymaymay said:
Two more tips:
1. Start/Settings/Connections/USB to PC - untic
Click to expand...
Click to collapse
This one works for my TP
Goshh... I love this board !!
Thank you very much, maymaymay
Still not working
Why can't someone come up with an ACTUAL solution to this?
When I connect my Tilt to the PC it automatically passes the internet connection through the PC. I did the registry fix and tried all four settings (0, 1, 10, 11) and still my data connection on the phone is overridden by the active sync desktop pass-through. I turned off the advanced networking option and still it goes through the PC. I even went through all the settings in active sync for "This computer is connected to" even though that doesn't even look like it would affect which connection my phone uses. This seems more like a setting within active sync on the phone more than anything.
I use my phone at work for chatting on yahoo IM (with Palringo) since my company network is filtered. I use a program called MyMobiler to transfer the phone display and controls to the PC so I can use my desktop keyboard for the chat program instead of my phone's keypad. Since the network is filtered the internet connection on my phone is filtered too since it's passed through the desktop when I active sync it to use MyMobiler. Sometimes Palringo will hold the connection even after I've connected to the desktop and sometimes it won't.
Bottom line here is can someone come up with an real working solution to this problem that a LOT of people are having?
HOW TO DISABLE DESKTOP PASSTHROUGH WHEN CONNECTING WITH ACTIVESYNC. Search that on google and here and all you will find are people saying "Yeah I have that problem too" or people telling how to connect WITH desktop passthrough.
I have a similar issue. I have my phone connected to my work PC to charge / sync, but all Internet connections attempted by the phone are being routed through my work network until I unplug the USB.
Naturally, that's very bad since all Internet traffic is logged by my work and many sources are blocked. I have an unlimited data plan on my phone. Why can't I stay connected to it when I'm hooked to ActiveSync?
I read someplace that Windows Mobile has an order of preference where connections are concerned. Probably hard line, then wi-fi, 3G and then EDGE. Surely there must be some way to modify this order of preference.
The thread is missunderstood...
The problem here is give to the PPC internet via usb... providede by a PC...
The solution that REG (that works for me EVER!!!).
And now other one provide internet to my PC via usb on phone account
With apologies, I'm not sure I understood what you said there.
But, some of us are actually trying to stop receiving internet by the USB.
I would like the phone to initiate a wireless 3G connection even when connected to the PC. But, thus far, all settings I've tried still cause my phone to attempt to access my business network here at my company.
Big no-no.
have you finally solved the problem?
If so just like to ask if you have change your homepage in ppc? which is
file://windows/default_0409.htm?
and have not run your network wizard? then maybe I have the solution here
Reg key
HKEY_LOCAL_MACHINE\Software\Microsoft\Internet Explorer/AboutURLs/
usually it is ( default value )
A.Blank value is res://webview.dll/blank.htm
B.Home_0409 value isfile://windows/default_0409.htm
C.version_0409value isfile://windows/default_0409.htm
if there is a new reg in that one try to delete that file again using a registry explorer ( depends on what you use to view the file)
turn it off for about 30 secs then soft reset... I hope this helps out
I'm not sure that addresses the issue, or mine at least. My phone disables HSDPA the moment I plug the USB cable into the phone and Active Sync takes over. It's before I even open a browser.
Not only does the phone start looking for Internet over the USB Active Sync connection, it looks for non browser related things like weather updates and sending mail to the gmail server.
Somewhere, it's coded to have an order of preference in what kind of connection it accesses. By default, it seems to look for any available land line connection, possibly wi-fi next, then 3G and then EDGE. I'd like to take the land line connection completely out of the equation.
Has anyone already seen this or knows how to solve this problem?
My friend has a HTC TYTN2 and after connecting via usb in the pc, the tray icon displays connected, but you cannot sync, cannot do anything. The activesync main windows says it's disconnected. You cannot browse the files from "My Computer" too. So only the tray icon says it's connected (connection established as saw in network connections), but all other windows says that is disconnected. I've tried my Hermes in his computer with the same result. I've already tried an old activesync, the dhcp service is running and firewall is off.
Thanks.
Sorry, I made a really rude comment without reading carefully. My bad.
First, uncheck "Enable advanced network" in Settings>Connections>USB to PC, then reinsert the PPC.
If that doesn't work, with the Pocket PC cradled, check your device manager under network adapters to see if your pocket pc is there. If it is, delete the entry in the device manager. After a short while, the computer should automatically find the ppc and install the right drivers.
...and more importantly how do I fix it.
When my Excalibur automatically tries to access data services while plugged in I always get a message about not having the right settings.
And on ActiveSync on my PC in the Microsoft Exchange part it says "Attention Required", and when I click on that it says something about checking the data settings on my device.
By default when you connect to active sync your dash uses your PCs connection. If your PC doesn't have an internet connection then you wont be able to use the data connection while plugged in via usb. Activesync has a setting that allows you to use your devices wireless services while plugged in via usb.
quiksand said:
By default when you connect to active sync your dash uses your PCs connection. If your PC doesn't have an internet connection then you wont be able to use the data connection while plugged in via usb. Activesync has a setting that allows you to use your devices wireless services while plugged in via usb.
Click to expand...
Click to collapse
Well I do have an internet connection, so I guess something isn't set up correctly. What would that be?
And what is this setting to allow me to use my EDGE connection?
In activesync go to file > conection settings > Allow wireless connection on device when connected to the desktop.
quiksand said:
In activesync go to file > conection settings > Allow wireless connection on device when connected to the desktop.
Click to expand...
Click to collapse
cool thanks, I'll try that when I get home.
quiksand said:
In activesync go to file > conection settings > Allow wireless connection on device when connected to the desktop.
Click to expand...
Click to collapse
thanks for the TIP
quiksand said:
In activesync go to file > conection settings > Allow wireless connection on device when connected to the desktop.
Click to expand...
Click to collapse
Nope, didn't work. I have that checked off and I still can't connect while plugged in.
can't access data while chargin on pc
Yes I started having the same problem after I changed to the new HTC ROM. My settings are correct on activesync.
Similar issue...
Hey,
I believe I'm having a similar problem and rather than starting a whole new thread I just thought I'd mention it here. I have a wireless connection router in my home, and generally it works fine for all of us. However, everytime I plug my phone in (since upgrading to ricky's rebake of kavana's ****40) my wireless connection goes all haywire and bumps me off. Then, even after I've unplugged the phone for a while, it is still a little weird until I reset everything, restart my pc and all. Any thoughts?
-Nate
Chillin said:
Nope, didn't work. I have that checked off and I still can't connect while plugged in.
Click to expand...
Click to collapse
You want it checked to use EDGE while connected to your PC.
If you are using T-mobile data plan(19.99/mo) you will need to delete the 2 proxy entries under connections to make edge work right after using the HTC connection setup wizard. I think those proxy entries are for if you have the 5.99 t-zones plan. I had to delete them, and set my t-mobile data connection to Connect to The Internet to get my apps working right after upgrading.