Develop Bugs

QTEK S200 phone lock code??

Hi I have just acquired a QTEK S200 from my cousin (gadget freak) and he says I can keep it if I can fix it...
Basically the problem seems to be that when it is switched on, it asks for a password code.
I am hoping that there is a fix so I can prove him wrong!!

Please refrain from doubleposting. What you need to do is reflash your s200. It's a fairly complicated procedure so you'd want to know what to do in order to not brick it.
Go back to the prophet upgrading forum, read read read on how to do a ROM upgrade and you should have your s200 up and running in no time.
Good luck

Complete package for upgrade hx2xxx to WM6

Inside:
-WWE-hx2000_PPC03_downgrade for return to WM2003se
-Wm5.0 for hx2000_1.00.00.L_ENG
-Wm5.0 for hx2750_1.00.00.L_ENG
-SP32205_1.00.03.H_RUS
-SP32205_1.00.03.H_RUS
-SP32408_1.00.00.H_ENG
-SP33003_1.02.00.H_ENG
-WM6.0_5.20.00.H_ENG
-Terminal_RDP
-Quarta
-hx2x90b_Mui_Quarta7
http://depositfiles.com/en/files/1799963
Thanks to Niko512 from 4pda!

I've an hx2415... would it works?
and when I've finished to DL... what must I do?

I've to Use Pre-BL mode?
'coz doesn't works for mine

I'm on WM5 but it's going really slowly ...
...I'm not able to upgrade to WM6 (SKU problem...?) and I need help about it...
Question: it's normal that PDA going so slow with WM5 ? when I clic on "settings" 2 (or 3) seconds needed

Please give another link to Advanced_pack_for_hx2xxx_to_WM6.exe , cause the original one is too slow for download and had a CRC.
please help me.
thx

Did you succed download ?
zeRobee said:
Please give another link to Advanced_pack_for_hx2xxx_to_WM6.exe , cause the original one is too slow for download and had a CRC.
please help me.
thx
Click to expand...
Click to collapse
============
DEAR
Is all OK ? You succed to download and to INSTALL wm6 ?
Please give me directions :
i have Hx2110 .
thanks

Please directions //....STEP BY STEP!
dancer_69 said:
Inside:
-WWE-hx2000_PPC03_downgrade for return to WM2003se
-Wm5.0 for hx2000_1.00.00.L_ENG
-Wm5.0 for hx2750_1.00.00.L_ENG
-SP32205_1.00.03.H_RUS
-SP32205_1.00.03.H_RUS
-SP32408_1.00.00.H_ENG
-SP33003_1.02.00.H_ENG
-WM6.0_5.20.00.H_ENG
-Terminal_RDP
-Quarta
-hx2x90b_Mui_Quarta7
http://depositfiles.com/en/files/1799963
Thanks to Niko512 from 4pda!
Click to expand...
Click to collapse
------------------------------------
Please directions //....STEP BY STEP!
Who is Niko512 ?
It is a Greek ?
gia sou Niko ....

Anyone had any success with an ipaq 2410 as every attempt at it has resulting in hanging at formatting PS right at the end.
If anyone could provide a guide that would enable me to use WM6 on the 2410 Id be grateful.
Even followed this with no success
http://forum.xda-developers.com/showthread.php?t=372799
EDIT: Finally got WM6 on my mobile thank **** for that.

Having trouble to upgrade my hx2410 WinCE4.21 to WM5
Hi,
I'm having trouble to upgrade my hx2410 to WM5. I successfully connect/sync my hx2410 with my pc thru bluetooth. But the upgrade process always stops at 0% and says to reset the hx2410. I tried many time and it is still the same problem . Anybody knows what might be the problem i'm facing? I wanted to install iGuidance for PPC on it and I need WM5. Help please.
Thanks

benkud said:
Hi,
I'm having trouble to upgrade my hx2410 to WM5. I successfully connect/sync my hx2410 with my pc thru bluetooth. But the upgrade process always stops at 0% and says to reset the hx2410. I tried many time and it is still the same problem . Anybody knows what might be the problem i'm facing? I wanted to install iGuidance for PPC on it and I need WM5. Help please.
Thanks
Click to expand...
Click to collapse
You can't update device through Bluetooth - it's impossible
You will need a USB cable or Cradle.
Go to my thread LINK and read first 3 posts

please help me updsating to wm6..so many problems for a noob

hi ppl...
I am having many problems installing any rom on my pda trinity ..
Can´t do hard-spl at first time, got error 246. Then, appears bootloader, i restart the application, and at the second time could install it .. ( sems odd to me)..can confirm hardspl is installed.
Then i have downloaded the dopod wm6 and when i try to install, get invalid id error at 1%..it stucks in bootloader..get this on it:
TRIN100
IPL - 0.50
TRIN100
SPL-3.03.0000 (why this?? )
Fortunately can install my official rom from htc..
Conclusion: stick to my official rom ( portuguese ).. stake zero.
But someone already had this problem? Or similar?
i am fed up with seeking.. forum xda, trinityguides .. google..all kind of foruns
what i am doing wrong? Have afraid doing the update with a cook rom my pda crashes..
what can i do?? what have my pda ??
p.s-> 10x in adavance..happy good year

Dude, you should use search function!
There are many link to Error 246
I suggest read this:
www.trinityguides.info
Here you can find everything. Error 246 too...
This is the rom flash Bible by racer_x!

Jeanxito said:
hi ppl...
I am having many problems installing any rom on my pda trinity ..
Can´t do hard-spl at first time, got error 246. Then, appears bootloader, i restart the application, and at the second time could install it .. ( sems odd to me)..can confirm hardspl is installed.
Then i have downloaded the dopod wm6 and when i try to install, get invalid id error at 1%..it stucks in bootloader..get this on it:
TRIN100
IPL - 0.50
TRIN100
SPL-3.03.0000 (why this?? )
Fortunately can install my official rom from htc..
Conclusion: stick to my official rom ( portuguese ).. stake zero.
But someone already had this problem? Or similar?
i am fed up with seeking.. forum xda, trinityguides .. google..all kind of foruns
what i am doing wrong? Have afraid doing the update with a cook rom my pda crashes..
what can i do?? what have my pda ??
p.s-> 10x in adavance..happy good year
Click to expand...
Click to collapse
From reading the above - I don't believe that the 246 error is your problem. (The 246 error is due to the Rom Upgrade Utility not waiting for the trinity to reconnect in bootloader mode - as soon as the connection is lost you get that. as you have seen, by restarting the RUU - or only starting the RUU when the phone is manually in bootloader mode - you can get the ROM loaded.)
I believe your problem is the stuck at 1% trying to flash the dopod ROM.
My 2 cents: forget the DOPOD ROM - it really is not as good as the cooked ROMs - in this case - "official" is not better.
The 1% sticking problem is a problem with this ROM.
Download another ROM (which one is not an easy question - but I have heard good things about sammy_deluxe ROM if you're looking for a portuguese ROM) and try updating with another ROM. it will work. Patience!
Happy new year to you too

Imate Jamin Wont Flash

Hi Guys,
Im a newbie when it comes to flashing Roms. I have tried flashing Jamin by several methods with no success, keep getting error 260 code, communication error.
I posted this in Post one in Jesterz thread (post #143 pg 15) http://forum.xda-developers.com/showthread.php?t=284578 and on http://forum.xda-developers.com/showthread.php?t=413124
Can anybody give me any advice as i really want to try some of the Roms here but im having problems. When imate realeased their updated Rom a year or so ago, this installed with no problems??
methods tried so far seperately resetting each time, with no success (same error problem):
Prophet_PDAViet Temp
upgrade HardSP G3
Romupdate NV G3
Jester r1 G3 - RUU
Prophet G3 IPL V2.20
Direct 5 to 6.1 tool
WM6 smart1 v1.3
Imate Jamin
ILP 1.00
SPL 2.13.000
OS 2.13.9.23
GSM 02.20.21
Obtained from bootloader.
ANy ideas/suggestions would be great an thanks in advance.
btw i have searched forums in great depth and most people have success, so i am confused as to why i cannot get rom to flash?

Try to change the USB port! My Ultimate 6150 allowed to be flashed being conected only to one port! The other three ports lead to an comm error. Hope to help you!
Good luck!

Part flashed now try to get wm6
quetzalquatl said:
Try to change the USB port! My Ultimate 6150 allowed to be flashed being conected only to one port! The other three ports lead to an comm error. Hope to help you!
Good luck!
Click to expand...
Click to collapse
Hey, Thanks for that! I had tried 3 of 4 of my usb ports, all failed but the one i hadnt tried.
Ok now for next problem
Now running Jesterz AKU 2.2 which flashed fine.
AKU2.2 IPL 2.20 SPL 2.20.0000
I now try to flash to wm6, i have tried cyrstal V3, direct 5 to 6 tool and lazy tools. i have done hard spl just in case which goes on very quickly no problem.
From what i read i should be able to go straight to 6 now?
I keep getting error 240 mostly and occasionally 274?
I have reset device and laptop and tried all usb ports!
Sorry to be a pain but i am half way there now and desp want to flash to wm6.

SUCCESS NOW Wm6
Just to say thanks to everyone who helped with their infinate wisdom,
i finally flashed to wm6 Crystal V3 and now have the confidence to try other OS!
Words to newbies, do your research, then try and if you fail, ask and try try again, its sooooo worth it!
My Jamin has never run so well!!!

Problem whit Arte 100

I need an help i receive this from Netherlands and need to change language in italy so i dowload P3300 Italy 3.13.408.1_02.94.90 Ship R, but first i use USPL and all process go ok, but after when i try to charge this Rom i receive this error 244 ivalid Model ID, why
Tanks for help
ILP 1.12.0001
Spl 1.11.cmon

Yes i solve problem, finally i manage using Spaghetti Rom and all Rom utilty for USpl this baby, if someone have same my problem tell me i post complete rom whit uspl.

Are you using Vista? If yes, then try downloading in a computer with Windows XP?

gsmsupport said:
Yes i solve problem, finally i manage using Spaghetti Rom and all Rom utilty for USpl this baby, if someone have same my problem tell me i post complete rom whit uspl.
Click to expand...
Click to collapse
yeh,i have same problem.did spl as well but dose not update rom and tells invalid.whats to do plz help.
ipl 1.14.0001
spl 1.11.0000
os 1.14.0.0

Please, don't revive threads from over a year old. As I appreciate you using the search function, if you find a thread which is over a year old, best thing to do is create a new thread.
Also, this thread is related to upgrading your Artemis, so it doesn't really fit in ROM Development. Closing the thread.