I'm new about this Toshiba Portege G810. Everything is ok for me, but I have just one problem. That is headset volume. It's too low and can't listen radio in voicy environment.
Can anybody help me?
and I have the same problem, not only when listenin the radio.Speakerphone sound is realy too low, and ringtone sound.....everything about sound on this poretege is too low, soft....Thats the only thing make me nervouse and nonsatisfied for this toshiba!
I tried lot of things via changing registers key, installing some software like SRS WOW (dont do this, i had to do HARD RESET after that)....but without succes. I sent also email to toshiba but without reply from them....
Please, if anybody have some solution for this problem, let us know....please write here....
Soloution
I had the same problem ,and i found the solution http://cgi.ebay.co.uk/Toshiba-Porte...wItemQQptZPDA_Accessories?hash=item33573d1c2e
It's realy louder!
Related
Hi,
Is anyone using the Jabra BT250 with QTEK9090 without problems? if so, what have you done?
I bought this headset, paired it with the QTEK and..... crackling! craclking and more crackling.... the only way i can get a clear sound is when i put the QTEK close to the headset (5-20cm) if it wasn´t sad it would be funny, i have to hold the QTEK next to my ear with the hearset on, if the unit is in my pocket or on the other side of my body... well.... not one word is understood... just crackling! 10 meters haha... it´s a joke!
I can´t believe HTC is selling 1000´s of units with this kind of problems!!!
It´s supposed to be a PHONE!!!! you can´t use the unit because of the low voice issue with the mic, you can´t use the headset because you have also the low volume issue... and you can´t use a BT headset because of all the BT issues... GREAT!!!
vega.
I have problems with my jabra and mda3 - I have to have the phone on the same side of my body as the headset otherwise it's too crackly.
I also have a PDA2K and a XDA2s, and use Jabra 250 and 250V I have the same problems as you. I used the second update from Imate it dose seem to make the Bluetooth More stable, but still you need to hold the phone near your head to stop the audio crackle.
I also spoke with Jabra as Imate are now saying there is a fault with Jabra headsets, The Guy at Jabra had a good larph about that.
Have you read the description???
Hello together,
i think you should read the description of the Jabra carefully.
They write, that you have to put the bluetooth-device on the side of your body, where you put the Jabra on your ear."Because the human body can make interferences."
Second, i think you have paired your device with the jabra in front of you. Don't do that. When the devices will pair, they changes some parameters of frequences. So do that:
Put your headset on your ear, search for devices on the pda, and after you put the code in, put the pda on the position where you will wear it.
After 30sec. look if it is OK! Than test, if it is crackly.
When it is not OK, delete the pairing devices, Reset both of them, go to another place (2m away, because of interferences) and try it again.
So, in the worst case, after 3 times, i have no crackly!
Good luck, Mario
I'll give that a go
..and has anyone seen any benefits with the Jabra250 after applying the second BT patch?
No... it´s the same... after the BT patch or with SuperMario´s tips above the crackling issue continues...
... i phoned JABRA support and they told me that it has something to do with the BlueAngel internal antenna...
...and that it was the same with the XDAII...
what i find strange is that i´ve already read somewere a XDAII user saying that he managed to fix the crackling with his jabra BT250! i don´t think he stated HOW!!!
and again i ask : Is anyone using the Jabra BT250 with QTEK9090 without problems? if so, what have you done? pplllleeeeaaassseee!!!
BT and JABRA - the saga continues
No... it´s the same... after the BT patch or with SuperMario´s tips above the crackling issue continues...
... i phoned JABRA support and they told me that it has something to do with the BlueAngel internal antenna...
...and that it was the same with the XDAII...
what i find strange is that i´ve already read somewere a XDAII user saying that he managed to fix the crackling with his jabra BT250! i don´t think he stated HOW!!!
and again i ask : Is anyone using the Jabra BT250 with QTEK9090 without problems? if so, what have you done? pplllleeeeaaassseee!!!
Re: Have you read the description???
SuperMario said:
Second, i think you have paired your device with the jabra in front of you. Don't do that. When the devices will pair, they changes some parameters of frequences. So do that:
Put your headset on your ear, search for devices on the pda, and after you put the code in, put the pda on the position where you will wear it.
After 30sec. look if it is OK! Than test, if it is crackly.
When it is not OK, delete the pairing devices, Reset both of them, go to another place (2m away, because of interferences) and try it again.
So, in the worst case, after 3 times, i have no crackly!
Click to expand...
Click to collapse
^^ Try That!!
I´ve already tried that several times... tried it again... that tip doesn´t seem to work for me!
i´m getting really frustrated with this...
thanks anyway...
O2 have already admitted the problem with the Jabra BT250, their UK product manager sent me this link which shows the compatibility issues with BT stuff:
http://www.my-xda.com/downloads/Other_Bluetooth.pdf
Tommy
Dear experts,
Sorry if this question was answered before, but I've been searching through the threads and couldn't find one..
I have a WM5 Orange Artemis (SPV M650) and I'm facing the following issue: when I play music with WMPlayer I get sound both through the phone speaker and the usb headphones. This is the same case with a friend of mine having the same device.
Probably there is some sort of a software solution to this problem, since with the already-installed FM radio application there is a button you can use to activate the speaker or to redirect sound through the headphones only.
Now I'm not able to use my phone as a music player due to this problem so any help will be much appreciated. Thank you!
Ksu
Had this problem before, open up the volume slider part of the earphones with a small screwdriver (push on the plastic tabs that hold the 2 sides together) and separate the wires going into and out of it, I found some were crossing and moving them apart sorted it fine!
Hope this helps...
Thanks for yr reply Pjtheman, I will try this, though I will keep wondering if it were a matter of crossed wiring, why it works fine with the radio application!!
I'll open the headphones slider and see what I can find..
yours, Ksu
I've just opened the headphones slider and found that all the wires were duly isolated from each other..
Perhaps a solution to this problem is to install advanced volume controls that can mute and control the volume of the earphones and the speaker independantly. Does such application exist??
Thanks for yr help.
Ksu
Guys,
Has anyone here experienced the same problem?? Am I the only one? Would you pls try and tell me if you have the same problem? Thanks for your help..
Ksu
Hay guys. I updated my 8525 to WM6 around Thanksgiving, and everything was great. I had no problems at all. I decided to whip out my old i-phono stereo bluetooth headset and try it out with the superior A2DP quality on WM6. It worked really well, though I decided to go ahead and remove the BitPool and MaxSupportedBitPool registry keys as well as most people suggest for increased quality. It worked really well up until yesterday when I tried using my headset, and everything went wrong. When the headset syncs with the phone, the phone starts facing a lot of slow down. The worst thing is that when I try to play music, the music stutters hella bad, and the quality is very low. It's almost like the phone is super busy type of poor playback, which can happen even without using bluetooth, though the problem is exacerbated when trying to stream music data to the headset.
Short of a hard reset, I haven't a clue what to do, or why it is doing it all of a sudden. I've already tried the task manager fix, and related .cab fix, but it did nothing for me. Really ticks me off....
WTF guys!?!
Same Problem Here I Think
I upgraded my 8525 to WM6, reinstalled all my aftermarket ware and suddenly the stream to my Motorola S9s is all static filled and has a very low volume. Everything else works great. Even the 4Gb SDHC card...
I've been all over the net looking for others with this problem and you're the first I've found.
I'm actively looking for a fix and will reply to this thread if I find one.
Hi Guys,
I have a simular probelm, I am Using Schaps WinMob6 3.56c Multi with a Motorola S9 BT Headset, on an HTC Hermes. The Volume iss ok, sound quality decent, what's driving me crazy ist:
As soon as I start playback everything slows down so bad that it is almost impossible to use the phone. Opening Opera takes about 60sec. Menus lag badly. I have tried playing with the settings nothing helps.
Setup:
Use Joint Stereo: Yes
Sample Rate 48000 (for some reason i can not change this)
Bit Pool: 86 (default)
Max Bit: 86 (default)
Changing the Bitpool seems to make no difference
To summ it up
Help would be appreciated!
If I find something that helps I will post it here ASAP,
Have a good one,
Chris
I honestly can't believe nobody has an answer...
Have U Read this http://forum.xda-developers.com/showthread.php?t=352054 ??
Grüsse,
Chris
Thanks, that helped a bit. Still no solution though...
Hi Guys,
I've got a quite big problem with my Hermes:
The first time I'm phoning after a soft/hard reset, the other is able to hear me, but from the second call (no matter whether i called or if i was called by someone) the microphone of my Hermes is switched off.
The button to switch off the mic isn't activated, and the mic-shutted-off-symbol isn't shown too.
I'm running Shaps 3.57a and the onliest installed programm is SRS Labs WOW Sound. Furthermore I'm using a bluetooth a2dp Headset to listen music (with an integrated mic, this one doesn't wort too).
What can I do? Please help me...
Thanks,
Hupfi
Speaking personally, I had problems with SRS WOW... Try disabling it to see what happens...
If that doesn't fix, it could be hardware issue...
Cheers...
SRS WoW is more trouble that its worth.
Remove it, and if your still having issues hard reset (back up data of cause).
If not try flashing your OEM rom, if it still doesn't work, its a hardware issue.
Hi,
thanks for the fast answers!
Ok, I'll do so, but do you know any other programm, offering such possibilities for the sound-settings?
Greetings,
hi guy,
i was having a same situation with thread starter.
but now, after i removed SRS WOW HD.
the problem has been fixed.
thanks for all kindly advice.
goodday!!!
I removed SRS yesterday, now everything's working perfect...
Thank you all!
Dear XDA-Developers and users,
For 4 months now, i have my (T-Mobile) Raphael and it's been working great. I have the latest (dutch) HTC ROM installed and that made my Raphael faster.
PROBLEM
Since a few days now, i have a problem with my headset. Actually the problem is not my headset, but when i pull it out of my cellphone.
- The Headset icon stays always in the top bar of Windows Mobile.
As a result, I can't hear my music trough the external speaker. And even worse:
- I can't make a call without the headset plugged in because I can't hear the person speaking and my internal mic doesn't work.
Has anyone ever had this problem? I've searched the internet using Google and I found some articles of Treo user who had the same problem. They recommended pulling in and out the headset, so it would 'reset' this function. So i've tried, it wouldnt work on my Raphael (else i wouldn't start this threat, would i? )
SOLUTION (?)
At this point, i think a great solution would be a little (registry)tweak which can switch on/off the headset-sensor.
Any ideas (or solutions)?
I'd like to hear from you!
Greetings
A Dutch Touch Pro user.
Nobody of you guys ever had the same problem?
Maybe i should create a threat in the Raphael topic?
i have the same problem on polaris
does anyone konws how to fix this??
rukako said:
i have the same problem on polaris
does anyone konws how to fix this??
Click to expand...
Click to collapse
Even i am facing the same problem....but when i installed the Android on the phone, it worked perfectly and in the windows, the same problem is occurring....