Hi guys
I ahve an o2 XDA2i which i use for general phnes and my sat nav.
Recently i put my works Vodaphone card in and it works fine, the problem i have is for me remove the default settings for o2 connections to gprs.
i need to connect to vodaphone to use my traffic updates on tom tom
any ideas
Related
Hi,
I want to buy me a QTek 9090, but first I wanted to know if someone has experience on the Proximus-Network (Belgium).
Is it worth buying a Qtek 9090?
Sam
Hi !
I'm using QTEK 9090 (french) with proximus. I have no problem using the GSM network. I use no GPRS.
Regards,
Olivier
I'm using a Qtek 9090 since 4 weeks with Proximus as GSM and GPRS without problems.
Qtek 9090 is a great tool :lol:
Is there any update available for qtek 9090 and from where?
Hi all,
Thanks for your responses! I will order my QTek 9090 tomorrow! Any experience with Bluetooth GPS? I read about some problems with QTek 9090 and bluetooth...
Hope they will solve this soon!
I'm using the QTek 2020 for a year and that one is great, so I guess the 9090 is even better!
Sam
I tried the my father's bluetooth GPS (mine is serial, using old QTEK1010 cables), and it seems to work fine. My father had problem with his ipaq 2210 and the BT GPS, using tomtom on SD card : bluetooth connection was lost after a few mins. With maps on the CF card : OK.
Hope this help.
I'm using my 9090 now for a week on Proximus, not problems at all. It's a company SIM card so I don't have GPRS so I can't comment on that.
My biggest problem is WiFi access - sometimes it's working OK, other times not. Getting it setup for the office and home is proving to be difficult. To be honest the software is not so easy to use in this respect and I would also imagine they need a firmware upgrade soon...
Other than that it has been a very pleasant experience overall.
Today I'm going to www.padeg.com to buy a 1giga SD card :twisted:
Hi,
I got my QTek 9090 and these are my experiences:
- Great machine!
- Proximus works fine
- GPRS works fine
- Bluetooth GPS works fine
- Bluetooth ActiveSync works fine
(only this http://forum.xda-developers.com/viewtopic.php?t=13604)
It is a great machine!!!!
Sam
configuring qtek 9090 for GPRS with proximus
can anybody show me how to configure my qtek 9090 for having gprs with proximus?
In fact, i have configured it yet and can be logged to proximus but i cannot load any web page.
Thanks for answering me.
QTEK 9090 + proximus
Does anybody know how to configure the QTEK 9090 for proximus Mobile Internet ?
Go to www.smart-phones.be in the support area
Cheers
V.
hi all,
I just bought a pack: tom tom navigator 3 with bluetooth receiver and a an extra cd that should work with windows SE....but it doesn't... I've tried installing it and get the message: device unknown
anyone has had the same problem??
thanks!
try getting the tomtom update on my xdaIIs works fine but a friend had to get the update for his spv 2000
yep mine runs ok on my 2s sounds like a M2000 compatiblity issue. dont know why though as i thouhjt the xda2s was very simular to the M2000
I had an issue while installing from the CD and I went to the web site, downloaded the software from there and it went okay. You may want to try this.
Hi there,
I have an O2 XDAiis. I would like to put the sim card from this into my Nokia 6230i and use my XDAiis as a PDA connected to my mobile through bluetooth. I have a IPAQ and am able to connect it to to my Nokia 6230i through bluetooth dialup networking but I cannot seen to be able to do this on my XDA. The connectivity I would like is a dialup modem and GPRS… please help
Thanks
Fiona
PS I am using the latest rom and bluetooth drivers from O2
Hi,
Yeah, the bluetooth seems to be cripled to stop you connecting via another mobile phone and make you use the operator it's got a SIM card for.
I would love to do this to - my blue angel is now my 2nd phone/pda/satnav and GPRS is expensive - if I want to use cheaper GPRS in it i've got to swap the SIM card with my main phone
I've looked about quite a bit but can't find any kind of info or workaround.
Ian
Hi,
I currently have TomTom Navigator v3 (with the 3.07) running on an IPAQ 3800 with a TomTom Wired GPS.
I have installed it on my Orange M2000 because I think i'm going to switch over to a Bluetooth GPS and do everything on the 1 device.
It's installed fine, the Wizard seems to work but the main program wont load - nothing happens.
If I remove the memory card, it comes up and says no maps found, so something's happening - but with the card in, nothing happens.
I've tried using a new card and the working one from my Ipaq and neither work (also, trying the new card in the Ipaq works too).
I've tried running it installed straight from the CD, and with the 3.07 update installed and I get the same thing.
Any ideas?
Anyone else had a similar issue?
Anyone else running TomTom on a Blue Angel? - does it work ok?
Thanks!
Ian
Hi Ian,
I have TomTom3 working fine on my SPV M2000.
The only problem you might have is with activating the software on more than one device - TomTom only allow 2 device activations per product number.
Darren
Hi,
Does anyone know of any GPS software which works on the XDA exec (windows mobile 5) and BT338 GPS without problems. Tomtom and navigon don't work without a lot of messing round. Just after a solution which can offer navigation perhaps with voice.
Regards
GPS Software for EXEC
Hi - I use an SPV M5000 (Orange) and an MDA 3 - Destinator PN works a treat on both - there is a reg edit for the EXEC to enable WM5 GPS. Hope this helps
yes, i have managed to install Destinator 3 and Destinator PN on both JASJAR and JAMin (WM5) without any problems....