Hi,
I currently have TomTom Navigator v3 (with the 3.07) running on an IPAQ 3800 with a TomTom Wired GPS.
I have installed it on my Orange M2000 because I think i'm going to switch over to a Bluetooth GPS and do everything on the 1 device.
It's installed fine, the Wizard seems to work but the main program wont load - nothing happens.
If I remove the memory card, it comes up and says no maps found, so something's happening - but with the card in, nothing happens.
I've tried using a new card and the working one from my Ipaq and neither work (also, trying the new card in the Ipaq works too).
I've tried running it installed straight from the CD, and with the 3.07 update installed and I get the same thing.
Any ideas?
Anyone else had a similar issue?
Anyone else running TomTom on a Blue Angel? - does it work ok?
Thanks!
Ian
Hi Ian,
I have TomTom3 working fine on my SPV M2000.
The only problem you might have is with activating the software on more than one device - TomTom only allow 2 device activations per product number.
Darren
Related
hi all,
I just bought a pack: tom tom navigator 3 with bluetooth receiver and a an extra cd that should work with windows SE....but it doesn't... I've tried installing it and get the message: device unknown
anyone has had the same problem??
thanks!
try getting the tomtom update on my xdaIIs works fine but a friend had to get the update for his spv 2000
yep mine runs ok on my 2s sounds like a M2000 compatiblity issue. dont know why though as i thouhjt the xda2s was very simular to the M2000
I had an issue while installing from the CD and I went to the web site, downloaded the software from there and it went okay. You may want to try this.
Hi! Im using an iMate PDA2K with TomTom navigator 5.1 and a GlobalSat BT 338 receiver. Everything works but sometimes after using TT,I notice that the bluetooth icon in the lower tray has disappeared.I then have to go and click on the Run BT Tray file in the windows/startup folder to get it back.
anyone know why this is happening and the solution for this?
thanks in advance.
Kaz
Hi
Cant help but I have a very similar problem.
Tomtom turns my BT off on exit from tt.
On some occassions the whole of BT manager and settings have frozen!
hope someone can help!
Just configure ir for normal cable gps instead of bluetooth...
hi
what is ir? what steps do i need to take? :shock:
I think the "ir" was a typo for it.....
I have configured it for "other wired GPS receiver and like I said, it works fine but sometimes (more often lately) when I exit from TT, the BT icon is not there in the system tray...
Have you got anything like the O2 active interface loaded onto the device, - if so get rid of it. This causes all sorts of instability, Once deleted mines been great, and with the new ROM from O2, its even better - Mike
nope, mine is the iMate version without any of the O2 stuff....
it's like the BT icon disappears randomly from the system tray....going to File Explorer and then the windows/startup folder and clicking on Run_BTTray gets it back.....and the BT works fine too..... :? :shock:
I have the 1.40 iMate ROM and apart from this,every thing seems to be peachy.....anyone got any clues what's going on????something is "closing" the BT in the system tray..how do I find out what it is and stop it....
Hi all,
The problem most of us experience is that microsoft removed the function of configuring com ports in their Pocket PC Version 4 build.
I have a program that can sort out the com port problems between the bluetooth and gps software.
I have included the program as an attachment, just unzip it into your PC, make sure you reboot your PDA, sync your PDA to the PC and run setup.
Problems solved.
Cheers,
John
i thought it was only the automatic comport handleing that was removed so you just have to manually set a com port it 2 second of a job
XDA comports
It seems that Microsoft left out our ability to configure com ports altogether. If you try and do a manual configuration with the GPS software it will drive you crazy. I have had so many emails at my hotmail account from people with problems that I have sent this program to and it has fixed thier problem. That is why I decided to put it up here.
Cheers,
John
Hi,
I have downloaded and installed the file to my PDA
What else do i have to do?
The read me file is in a different language and i cant read
Thanks
CoZZa
Bluetooth GPS problem
I have updated the zip file to include a new readme file.
Please follow the instructions.
Unzip file to PC
Reboot PDA.
Sync PDA to PC.
Run Setup.exe
Problem should be fixed, if not reinstall GPS software.
Cheers,
John
Hi John,
Thanks for that.
I tried it and it doesnt appear to have fixed it.
I installed the patch rebooted phone, removed TomTom6 and reinstalled and still cant connect to bluetooth headset, uninstall TomTom6 put on TomTom5 and works, back to 6 still no go.
Any other suggestions?
Cheers
Hi Cozza,
Sorry you are still having a problem, only thing I can suggest is to see if anyone else has a similar problem with TomTom 6, if so you may have to contact them direct and ask for technical assistance.
Just had another thought, could Tom Tom 6 be taking over the port assigned to the headset by default, if so maybe installing the headset after TomTom 6 might work???
Cheers,
John
Hi John,
Yep i have tried that.
Have formatted the phone several times both installing the Bluetooth Car Kit before and after TomTom 6 and still no luck.
TomTom 5 works fine but as soon as updated to TomTom6 Car Kit wont connect, it finds it but just 'connection failed'.
Remove TomTom6 and thinks work OK.
Weird....
Hmmm - What should be different?
I've installed this application, but I still don't see anyway to change either:
1. which port the bluetooth app assigns to the connection (currently port 7)
2. the selection of ports available from TomTom 5.21 to make a connection.
Like everyone else, I've gone through all the port options in TomTom, and it still doesn't connect to the GPS. Other GPS software (everything else I've ever tried - a LOT of software) has no problem connecting to my GPS, so this is obviously a TomTom problem.
Thanks!
Jason Silver
I made Headway!
I finally found something to help!!
http://www.tomtom.com/support/category.php?ID=3&Language=1&FID=3236
The above is a step-by-step guide. The key for my HP6325 (63xx series) was to not connect to BlueTooth, but "Other NMEA GPS." After that, the port connection through Bluetooth worked.
Yeah!
Jason
Detecting GPS on xda mini
Hi guys..
i'm a newbie.
have installed smartST on my xda2 mini with a navman 4110.
i can't seem to get my gps to talk to my xda.
the bluebooth picks up nothing. ie there is no device on the listing.
any ideas?
thx
bluetooth GPS
Hello,
I have included the program as an attachment, just unzip it into your PC, make sure you reboot your PDA, sync your PDA to the PC and run setup.
Problems solved.
Cheers,
John
I'm going mad
Hi all, I'm new to all this so please be patient
I've tried John's quick fix and it didn't work for me
It was all working fine up to last week when my sim card packed up, since I've put the new one in it can't find my GPS.
Can anybody please help, before I sling it out the window.
I have a XDA EX and a Holux gps, whit TomTom 5
Thanks bigbird49
hi
just a quickie to say thank you for this. I have tried adding ports, upgrading rom, using tomtom 6 & 5 to no avail. now pleased to say its working thanks to you and your programme.
Wizard GPS settings after GPS in phone is unlocked
I own a T-Mobile MDA (Wizard) with the 3-0-0 upgraded ROM and need the GPS settings after GPS in phone is unlocked. Anyone know how to do this?
Hi, i've upgraded my Tytn succesfully to WM6 Black Edition, works like a charm, great performance (better then WM5) only one major problem is that i cannot activate Rsap with "sapsettings" that doesn't seem available. I've downloaded the "ActivateMSBluetoothSAPProfile.cab" from another ROM but that gives an error.
Is there a ROM that has "Sapsettings" in the programs? I'd install that one then.
Any help is appreciated. Thnx.
Hi, I've had the same problem after upgrading my Hermes 300 to 3DES.3
I was missing the SAP or rSAP, which I needed for my Passat.
I found an OEM package here: http://wiki.xda-developers.com/index.php?pagename=HTC_Universal_WM6_Kitchen_Helmi
and downloaded the btsapprofile (direct link: ftp://xda:[email protected]/Uploads/Universal/helmi_c/Kitchen_OEM/btsapprofile.v1.45.rar)
Extract the content of this file to your PC. Copy SAPSettings.lnk to \Windows\Start Menu\Programs on your phone.
Copy SAPSettings.exe.0409.mui, sapsettings.htm, SAPSettings.exe, SALib.dll, BtSim.exe to \Windows on your phone.
Go to Programs on your phone - you should find a working link to SAP settings.
This did the trick for me.
Cheers - mgruett
You are my hero! Works 100%. Thank you!
While looking into this issue i found anothern, maybe easier solution together with my collegues (same problem here, for the VW Passat fleet)
Just open this file, unrar, copy .cab file on your Hermes, execute, softreset and off you go.
http://forum.xda-developers.com/attachment.php?attachmentid=29801&d=1155792304
tested it on 2 Hermes with WM6 and it works flawlessly.
rSAP with TyTN, s620 and Wizard
Hi,
when you're saying "100% working" and "works flawlessly" do you mean you have the Icon in your program folder or is it really working well with your car-kit ? Make phonecalls, Syncs phonebook etc. ???
I've a carkit from THB (bury) since ages in my car and upgraded the phone holders from old nokias up to the LT9100 with rSAP. As rSap pops up, I was 100% sure that this is the solution I'm looking for.
Since 6 months now, I try to get that damn thing working. It always fails with "Sim Card missing / not found". I could pair, it connects to the phone, disables the phone-module, but I couldn't dial a number, nor could I sync the phone book.
I tried it with Blueangel, Wizard, TyTN and my brandnew S620 without succes. I tried it with PPC 2003, WM5 and WM6 Roms, no chance. Of course, I followed the hints in the forum.
I sent the carkit to Bury to upgrade to the latest firmware and guess what ... nothing, always the same problem with Windows Devices, but my Nokia 9300 connects well in a second.
So, bottom line, I'm not sure if it is a Bury Problem with a bad rSAP support for WM or a WM Problem as my Nokia connects well.
Any thought or tipp is highly appreciated
Thanks
Chris
I just tried the download from WDawn (thanks incidentally) and aside from it resetting my background to the windows default, worked just fine. Enabled SAP, gave the phone a poke up the rear and tried it on a Nokia 616 car kit. This car kit uses SAP if available, otherwise falls back to HFP. It quite happily connected via SAP. Next text with be the Mercedes Bluetooth module, which would have to be the fussiest car unit I've ever come across and it only supports SAP (no HFP, HSP.. or other fall back).
The phone used is a DoPod 838 Pro running the newly released official WM6 ROM. I never had this success with the cooked LVSW ROMs that I used in the past.
Alex.
Progress but still troubled
WDawn said:
While looking into this issue i found anothern, maybe easier solution together with my collegues (same problem here, for the VW Passat fleet)
Just open this file, unrar, copy .cab file on your Hermes, execute, softreset and off you go.
forum.xda-developers.com/attachment.php?attachmentid=29801&d=155792304
tested it on 2 Hermes with WM6 and it works flawlessly.
Click to expand...
Click to collapse
Hello!
I have a HP Ipaq 914c and having troubles connecting with the VW Passat.
Here are the steps that I have made so far. Any help will be much appreciated.
1) Initialy on the VW menu searched for BT phones. Detected mine but whenever I selected it, returned back with the message: "Phone not compatible"
2) Dicovered here this tool BTSAP_Test, installed on the Ipaq and activated the "Remote SIM Access" checkbox button
3) VW now is able to pair with the phone (after inputing the 16 code number) but immediatly after pairing says that "Bluetooth is not activated on phone" ...
4) Looking on BT devices in IPAQ I can now see a device named "VW UHV PREM", but the only available service to use for this device is "Dialup Networking".
Am I missing something ? Thanks.
Hi, I am trying to get my MDA Compact & SPV M500 to recognise my Bluetooth GPS Unit I bought recently The Unit is A Copilot BT-GPS-365E50. My problem is, I installed Mobile Bluetooth Tools and it installed with no problems. It recognises my GPS Unit, but when pairing the devices the com port setup screen flashes for a moment then disappears. I therefore cannot setup a BT Serial Port. Any suggestions? Is it the GPS Unit? Is it not compatible with my MDA. I have tried this on both my Phones and get the same result. They are both HTC Magicians. I used this process on an XDA II with no problems. I just want to get my SatNav up and running. Hope myou can help and thanks for reading..
use nav n go Igo8
sirftech
Hi!
I also use iGO 8, ith connects automatically. If you like to use tomtom for instance, then I would use the SirfTech tool to establish the connection to your BT-GPS and then run your Nav applcation.
Cheers
Lui