Develop Bugs

Reg hack questions

Hi all, just wondering if the following can be done with some reg hack:
1. Enable Cleartype fonts
2. The fonts in POutlook is too big, can we make it smaller ?
3. Changing location of storing attachment e.g. SD
Many thanks

Try these
1. create a key: HKLM\SYSTEM\GDI\Cleartype
3. HKCU\Software\Microsoft\MAPI\AttachPath "\Storage Card\Inbox\Attachments"
HKCU\Software\Microsoft\MAPI\PropertyPath "\Storage Card\Inbox"

ALL rgu to hv conversions are wrong!!! WHY?

Has anyone else noticed that the HV to RGU and RGU to HV convertors Suck.
None of them work properly and they throw load of errors up.
Below is an example of what i am getting:
[HKEY_CLASSES_ROOT\CLSID\{BDE41C5F-EB7D-4c3d-8C9C-12D8F68B24D9}\InprocServer32]
"ThreadingModel"="Free" @="\\Windows\\sqlceca30.dll"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}]
@="Active SSCE remote data access Object"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}\ProgID]
@="SSCE.RemoteDataAccess.3.0"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}\InprocServer32]
"ThreadingModel"="Free" @="\\Windows\\sqlceca30.dll"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}]
@="SSCE Active Sync Engine Object"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\SSCE Active Sync Engine Object]
@=""
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\ProgID]
@="SSCE Active Sync Engine.3.0"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\InprocServer32]
"ThreadingModel"="Free" @="\\Windows\\sqlceca30.dll"
As everyone can see these are all wrong, when i try to process back from rgu to hv i get error messages, and the only way to get rid of the error messages is to do this:
[HKEY_CLASSES_ROOT\CLSID\{BDE41C5F-EB7D-4c3d-8C9C-12D8F68B24D9}\InprocServer32]
"ThreadingModel"="Free"[HKEY_CLASSES_ROOT\CLSID\{BDE41C5F-EB7D-4c3d-8C9C-12D8F68B24D9}\InprocServer32]
"ThreadingModel"="Free"
@="\\Windows\\sqlceca30.dll"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}]
@="Active SSCE remote data access Object"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}\ProgID]
@="SSCE.RemoteDataAccess.3.0"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}\InprocServer32]
"ThreadingModel"="Free"
@="\\Windows\\sqlceca30.dll"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}]
@="SSCE Active Sync Engine Object"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\SSCE Active Sync Engine Object]
@=""
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\ProgID]
@="SSCE Active Sync Engine.3.0"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\InprocServer32]
"ThreadingModel"="Free"
@="\\Windows\\sqlceca30.dll"
@="\\Windows\\sqlceca30.dll"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}]
@="Active SSCE remote data access Object"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}\ProgID]
@="SSCE.RemoteDataAccess.3.0"
[HKEY_CLASSES_ROOT\CLSID\{86132628-1DA5-489c-9EB9-49B39B9A5583}\InprocServer32]
"ThreadingModel"="Free"
@="\\Windows\\sqlceca30.dll"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}]
@="SSCE Active Sync Engine Object"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\SSCE Active Sync Engine Object]
@=""
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\ProgID]
@="SSCE Active Sync Engine.3.0"
[HKEY_CLASSES_ROOT\CLSID\{455c3e04-bfe9-4089-8622-f2464ec3fddb}\InprocServer32]
"ThreadingModel"="Free"
@="\\Windows\\sqlceca30.dll"
You have to manually site there pressing return all the way through BOTH registry rgu's
what is the problem with this. does anyone else get this?
I have been sat here for 3 hours trying to get all of the entries on separate lines.
there has to be a faster way of doing this?
are you seriously trying to tell my that JJ, Sleuth, Schaps etc etc all sit there for hours pressing return?
No i dont think so, so it is possible that someone can enlighted me as to what i am doing wrong
thanks
bennec83

Ive never experienced any errors with rgu to hv and voce versa conversions. I'm still using CORE's Kitchen!

Set 'Wordwrap' to 'off' when editing if using Notepad.

And make sure you set it to Unicode and not ANSI...
You have to check a few things.
1) REGEDIT4 at the top of the file
2) wordwrap is off
3) Save as Unicode
4) Leave a blank line at the last part.

bernardryan said:
And make sure you set it to Unicode and not ANSI...
You have to check a few things.
1) REGEDIT4 at the top of the file
2) wordwrap is off
3) Save as Unicode
4) Leave a blank line at the last part.
Click to expand...
Click to collapse
Right.
Never 'take for granted' every details.

make sure you have both .dll's present in the directory when you make the conversions (cereg400.dll & msvcr71.dll).
i had similar issues and found out I forgot to copy one of them althou everything "seemed" to work fine.
cheers,
dan

Somewhat related issue ... any help appreciated...
I'm trying to build a package for one of the apps I always use. I have been somewhat successful, but I see (when doing a WinDiff comparison on REG dumps before and after CAB installation), that there are several more Registry Entries created than can be gleaned from the CAB file. Several of these REG entries include a CLSID.
I used one of the online GUID generators to provide me with the GUIDs for the DSM and RGU files ... no problem.
But the CLSID entries already in my registry dumps obviously don't match this ID. So, do I:
1) make the CLSID entries in my RGU to match the ones in my REG dump?, or
2) make the CLSID entries in my RGU the same as the ones generated for my DSM and RGU files?, or
3) Change the GUID numbers on my DSM and RGU to match those of the REG dump?
Does it matter WHICH way I do it? Do my GUID numbers need to match the CLSID numbers at all?
Any help would be greatly appreciated.
Thanks a lot,
-pvs

New SMS

Hi,
I am trying to change one of my soft keys to "Compose a new SMS" but I am unsure of what file needs to be launched to allow me to compose a new SMS, could someone point in the right direction? I am running WM6 with vp3G 3.62.3 rom. Thanks guys!

I believe a shortcut like this will do it:
20#\Windows\tmail.exe -service "SMS"
And you can check this thread out.

you can also check this thread...
http://forum.xda-developers.com/showthread.php?t=359458&page=33

New Menu for WM5 (also works for WM6 of course) might be worth checking out. It is hands down the most useful program I have on my hermes.

Do this registry edit (note : 113 is for right softkey, 112 is for left)
[HKEY_CURRENT_USER\SOFTWARE\MICROSOFT\TODAY\KEYS\113]
Open = windows\tmail.exe -service "SMS" -to "" -body ""

Registry edit queries

Hi, i was going thorugh this forum and come across some registry twicks.
like below
Show Network Operator Name in today screen
Restoring Today Item: WiFi, BT and Phone Connection Status
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Today\Items]
Create "Wireless" use Key
"Flags"=dword:00000000
"Options"=dword:00000000
"DLL"="netui.dll"
"Order"=dword:00000000
"Enabled"=dword:00000001
"Type"=dword:00000004
I downloaded and installed Kilmist Registry Editor V2.5 on my htcp3300
but could not get how to add above entries in registry.. can someone address my query
Thanks

any clue guys.... i need to apply some tweaks by editing registry

Camera Setting Reg Help!!

i'm looking to create a file to add to \Windows\startup which will update the Registry settings for my BA.
I want to update the following:
Image Prefix String
Video Prefix String
Photo Encoder
Photo Resolution
Video Encoder
Video Resolution
I managed to figure out the Storage folder Reg which are below:
\HKCU\Software\IA Style\IA CameraWizard(Pocket PC)\2.21\Strings\Video Folder
\HKCU\Software\IA Style\IA CameraWizard(Pocket PC)\2.21\Strings\Image Folder
If any one can help with this it would be appreciated.
Cheers
Elliott

Can anyone help me with this?
Thanks
Elliott