Related
Does anybody know where the settings are stored that "tell" the Voicemail button innotifications which number to dial?
Whenever you get voicemail, you get a notification that pops up with an option to call voicemail. On my phone, however, the standard voicemail setup in Settings/Phone does NOT store commas so you cannot have one-click access to voicemail. In fact, when setting up the standard voicemail, you can type the comma, but when you exit and come back in, the comma is automatically deleted, so it doesn't work. So, I had to setup a contact entitled Voicemail and inserted the voicemail telephone number, comma, password and # there. Commas are retained in contact phone numbers, so I call that contact, I indeed get one-click access. I also made that contact Speed Dial 2.
What I want to be able to do is alter the settings for the Voicemail option in notifications so that instead of dialing the via the Settings/Phone setup it will either:
a) dial the contact
b) dial speed dial 2
or
c) allow me to directly enter what I want in the configuration for that option.
Even if I have to edit the Registry, I have no problem. I just don't know where that info is stored.
Anybody got any ideas?
TIA
Does V not allow you to check your voicemail from your phone without the password? I'm with Sprint, and when calling voicemail from my device it doesn't ask, but when calling from another phone it will.
-Drunk
traditionally it is stored in speed dial position 1 so you can press and hold 1 to call voicemail. I know you can edit it on AT&T phones might be able to on Verizon too.
therealdrunk said:
Does V not allow you to check your voicemail from your phone without the password? I'm with Sprint, and when calling voicemail from my device it doesn't ask, but when calling from another phone it will.
-Drunk
Click to expand...
Click to collapse
No Verizon requires you to enter a password even if you call from your cell phone.
dalavar said:
traditionally it is stored in speed dial position 1 so you can press and hold 1 to call voicemail. I know you can edit it on AT&T phones might be able to on Verizon too.
Click to expand...
Click to collapse
Yes, while the default is Speed Dial 1, that is NOT what I'm looking for because, as I stated above, commas cannot be maintained withing the standard voicemail setup location. Thus, when you press "voicemail" when prompted for messages, you end up having to type your password.
I am looking for a way to "remap" that Voicemail option on notifications.
On AT&T it is P for pause not comma's have you tried that?
Or you could install PhoneAlarm it allows you to change your voicemail number.
dalavar said:
On AT&T it is P for pause not comma's have you tried that?
Click to expand...
Click to collapse
That was the ticket! Thanks so much for the tip!
Hey everyone...so I've read that it is possible to set up Google Voice for my carrier's visual voicemail. I tried doing it by going to google.com/voice, logging in, adding my carrier's number, and activating it, but when I go to the Voice app, it says my carrier isn't set up to use Google Voicemail or something along those lines.
I'm hoping there's someone with an EVO who uses Google Voice to display voicemail for primary/carrier number. If someone knows how to do it, please tell me how you set it up! Thanks
The talk app can't do it automatically. Go to Google.com/voice. There is a spot in the settings for voicemail that tells you what to dial to setup conditional call forwarding on Sprint.
Sent from my EVO using Tapatalk
jabbawalkee said:
Hey everyone...so I've read that it is possible to set up Google Voice for my carrier's visual voicemail. I tried doing it by going to google.com/voice, logging in, adding my carrier's number, and activating it, but when I go to the Voice app, it says my carrier isn't set up to use Google Voicemail or something along those lines.
I'm hoping there's someone with an EVO who uses Google Voice to display voicemail for primary/carrier number. If someone knows how to do it, please tell me how you set it up! Thanks
Click to expand...
Click to collapse
I received that message too. Like, jabba said, you just activate your number through google voice. They'll give you a number to dial into the key pad that starts with a *xxxxxxxxxxx. When you click "call" you'll hear a couple beeps then the call disconnects after 3 seconds.
Also, you might have to go into the phones voicemail settings (through the voice mail widget) and set it to google voice (instead of carrier VM).
I did this today and tested it out. Works perfectly.
Is there any way to reduce the number of rings before VM pickup when using the conditional forwarding to google voice? I had it set up for a while but it took so long to pick up that I switched it back to the sprint visual vm.
One cannot alter the number of rings
before voicemail hits on Sprint's network. This is a carrier setting.
__
Thumbed wirelessly from my HTC EVO 4G thru Sprint PCS. Please excuse any typos.
parousia15 said:
I received that message too. Like, jabba said, you just activate your number through google voice. They'll give you a number to dial into the key pad that starts with a *xxxxxxxxxxx. When you click "call" you'll hear a couple beeps then the call disconnects after 3 seconds.
Also, you might have to go into the phones voicemail settings (through the voice mail widget) and set it to google voice (instead of carrier VM).
I did this today and tested it out. Works perfectly.
Click to expand...
Click to collapse
Thank you. I did that last night but wasn't sure if it worked because I was still getting that popup
marctronixx said:
One cannot alter the number of rings
before voicemail hits on Sprint's network. This is a carrier setting.
__
Thumbed wirelessly from my HTC EVO 4G thru Sprint PCS. Please excuse any typos.
Click to expand...
Click to collapse
I also read about this that some people were NOT receiving calls and it would go straight to voicemail. Has this been the case with any of you?
Yes...this has been happening to me and I still can't get Google Voice set up...ARGH!!!! so frustrating
ZDK
Is it possible to have gVoice only handle calls to my google number? I don't want calls to my sprint number to be handled by the google voice so I guess I'd have two seperate voicemails set up.
What do you mean? GV only forwards calls made to your GV number to your Sprint number or whatever number you specify. It does not handle calls made to your Sprint number.
Plus i think you're posting in the wrong section.
Google Voice is an app right? Would this be better in General?
If you call my sprint number right now, it will go to google voice's voicemail.
You can modify this in the google voice settings (not from your phone). Whether sprint or Google voice gets the voicemail is not a function of the app.
Go to google.com/voice > Settings on top right > Voice Settings. Under 'Cell' click 'Edit' then 'show advanced settings', then under 'Forwarding options' you click 'deactivate'.
.. Since it says "When someone calls this phone directly and I don't pick up". By directly, they must mean your actual cell phone number.
decalex said:
You can modify this in the google voice settings (not from your phone). Whether sprint or Google voice gets the voicemail is not a function of the app.
Go to google.com/voice > Settings on top right > Voice Settings. Under 'Cell' click 'Edit' then 'show advanced settings', then under 'Forwarding options' you click 'deactivate'.
.. Since it says "When someone calls this phone directly and I don't pick up". By directly, they must mean your actual cell phone number.
Click to expand...
Click to collapse
Thanks a bunch! I think that's what I needed. Will test tonight when my girl gets home. I use the google voice for my business, so I like to use two separate numbers/voicemails. thanks!
jirafabo said:
Thanks a bunch! I think that's what I needed. Will test tonight when my girl gets home. I use the google voice for my business, so I like to use two separate numbers/voicemails. thanks!
Click to expand...
Click to collapse
If you haven't already, check out the options for different voicemail greetings for different contacts. e.g. When my girlfriend calls, she gets her own custom greeting, whereas, if anyone calls who is grouped in my "work" contacts, they get their own, slightly more professional greeting, and so on. Also, there are options to screen certain calls (as if they're going through a service before it reaches you) and let others pass directly through to you.
Enjoy!
decalex said:
If you haven't already, check out the options for different voicemail greetings for different contacts. e.g. When my girlfriend calls, she gets her own custom greeting, whereas, if anyone calls who is grouped in my "work" contacts, they get their own, slightly more professional greeting, and so on. Also, there are options to screen certain calls (as if they're going through a service before it reaches you) and let others pass directly through to you.
Enjoy!
Click to expand...
Click to collapse
Yeah I like that option, but I have all personal calls go to my cell number, even if they aren't in my contacts list. I wish I could still use google voice for both voicemails, but without the numbers already being in my contacts, they'd always get the business voicemail, which would be confusing.
I normally use my "normal" phone number to dial from, but at times, I wish to use my Google Voice number to initiate a call.
I now use the "Ask me everytime" option within Google Voice.
Ideally, I would like to see the option displayed, but if no response is made, to default to the "normal" phone number.
Inasmuch as 90% of the time, I use the normal dialing process, I could just wait and place the call.
Currently, if I don't make a selection, the call is cancelled.
Does anyone know of a modification to the "Ask me everytime" option that would address my concerns?
Many thanks in advance
Badger51 said:
I normally use my "normal" phone number to dial from, but at times, I wish to use my Google Voice number to initiate a call.
I now use the "Ask me everytime" option within Google Voice.
Ideally, I would like to see the option displayed, but if no response is made, to default to the "normal" phone number.
Inasmuch as 90% of the time, I use the normal dialing process, I could just wait and place the call.
Currently, if I don't make a selection, the call is cancelled.
Does anyone know of a modification to the "Ask me everytime" option that would address my concerns?
Many thanks in advance
Click to expand...
Click to collapse
I don't have a real answer to your question, but I typically use the toggle on the GV widget.
Hello fellow Nexus 5Xers,
Just got the 5X and have been getting everything up and running these last few days. Previously, I had the old Nexus 5 on AT&T and am getting things set up on the new phone, also with AT&T. My goal is to try to get Google Voice VM set up.
I went through the normal voicemail set up on the Google Voice app, but noticed that I was not getting voicemails when people called. I tried calling my number on another line and got the "This number is out of order error message". I called AT&T and got set up with a carrier VM just to make sure I had something that worked.
I went back to the Google voice settings page on the website and re-registered my phone and tried to run the code that would forward calls to my Google Voice number. When I entered the code, it says "MMI Code started" and then comes back with "Call forwarding Connection problem or invalid MMI code".
I then tried re-doing set up on the Google Voice App on Android and still no luck. Then I tried setting up a conditional forwarding in the settings menu of the Phone under "Calls>Call Forwarding" to my google voice number and I get a "Call settings error, Unexepcted response from network".
Anyone else experiencing this? Any ideas on what to do to get Google Voice VM set up?
I'm getting the same exact problem and also on ATT. Can't seem to figure out what the issue is...
Works fine here just check on computer to forward calls use your at&t number
Try putting your SIM in another phone in order to issue the conditional call forwarding command, then put it back in the 5X. This is a network dependent feature which should continue to be in force until you cancel it (regardless of which phone you are using).
tlopez1973 said:
Works fine here just check on computer to forward calls use your at&t number
Click to expand...
Click to collapse
Thanks for the reply, TLopez. Are you using AT&T? When I go on my account page for AT&T, it says you have to enter a set of codes on the phone to set it up and can't set it up on-line.
charmcitybryan said:
Hello fellow Nexus 5Xers,
Just got the 5X and have been getting everything up and running these last few days. Previously, I had the old Nexus 5 on AT&T and am getting things set up on the new phone, also with AT&T. My goal is to try to get Google Voice VM set up.
Anyone else experiencing this? Any ideas on what to do to get Google Voice VM set up?
Click to expand...
Click to collapse
I am in the same boat as you. As far as I can tell the problem is with the way AT&T configured the account when we swapped SIM's. (Since you went from a Nexus 5 to the 5X, I'm assuming that you had AT&T give you a new Nano-SIM to replace the Micro-SIM that was in your 5).
From what I have been able to piece together all Smart Phone Voicemail accounts being provisioned now by AT&T are setup with Visual Voicemail and that setup is not allowing the provisional forwarding that Google Voice requires to become the Voicemail provider for the number.
When I look on my 5X under Dialer App -> Menu -> Settings -> Calls -> Call Forwarding
the Settings for "When busy", "When unanswered ", & "When unavailable" are "Off", "Off", & "Disabled".
When I look at these setting on an AT&T phone that was provisioned a few years ago, those setting show the AT&T voicemail access number.
I've talked to three different CSR's on the business account line and they had no useful information.
Same issue
I am also having the same issue. I switched from Nexus 4 to Nexus 5X and it seems AT&T network is not allowing call forwarding to be enabled.
Here is what I have tried but still now fix:
1.) Uninstall and reinstall Google Voice app.
2.) Uninstall, reboot, and reinstall Goofle Voice app.
3.) Deactivate and reactivate using instructions on voice.google.com
4.) Try programming forwarding number under Call Settings menu.
5.) Talk to AT&T chat support. No luck...insist the phone is unsupported on network data protocols or some other BS.
Any information would be helpful.
I remember from the past that even if att set has errors on the phone, that it worked anyway. I have been using gv since the nexus one and it was sketchy back then. I havent' had any problems for a couple years. The new sim might F it up. But it works for me. I have been involved in many GV threads in the past. It might help to read some of those. The web interface GV is the key. It has mostly to do with the settings on your end, not att. They don't know **** all anyway.
I'm going to search and see what I can find. I have used GV and att exclusively since 2010, and It's never really failed.
To be clear, I'm using a 5x with an Att SIM, I do not have GV installed on the N5X and things work normally, both GV # and SIM associated att # both go to GV VM and Notifications come through hangouts and both numbers ring the handset.
post here for Q's about web interface. I never touched the n5x voicemail settings. on the handset. it just worked from the beginning.
jbrinkley said:
I never touched the n5x voicemail settings. on the handset. it just worked from the beginning.
Click to expand...
Click to collapse
But you didn't change SIMs when you moved to your 5X, correct?
That has been my experience with GV and new phones in the past. As long as the account was configured correctly on the previous phone, there was nothing that needed to be done on the new phone, since all the conditional forwarding was already setup on the network side.
yes, correct. I was just trying to say that it's possible and you don't need to call att to make it happen. Under my forwarding menu
always forward =off
when busy, unanswered, unreachable = my gv #
jbrinkley said:
yes, correct. I was just trying to say that it's possible and you don't need to call att to make it happen. Under my forwarding menu
always forward =off
when busy, unanswered, unreachable = my gv #
Click to expand...
Click to collapse
Yea, if I go into that menu and try to change the values it just returns an error, I am not able to change the values from "off" and "disabled". And even with those showing "off" and "disabled" AT&T's voicemail works correctly.
what about voicemail setting? I have "your carrier" not gv.
jbrinkley said:
what about voicemail setting? I have "your carrier" not gv.
Click to expand...
Click to collapse
I have tried both setting, it makes no difference.
I even have had AT&T turn off VM on the network side, that didn't help at all.
At this point I'm not sure if "Conditional forwarding" is not available on newly provisioned lines or that the Nexus 5X doesn't have the tools to setup conditional forwarding.
I have a SIM adapter on order, when that comes in I will try to do the GV configuration on my old HTC M7 to see if that makes any difference. I don't really think that it will, but it sounds like a less frustrating step than calling into AT&T repeatedly until I happen across a CSR that knows how to setup conditional forwarding on the network side. (Or that knows conclusively that it is not possible on new SIM activations.)
read this page. it's something easy, it has to be. I have set up other people on gv with the same phones. Never had a problem but its in the details.
I do wish you good luck.
https://productforums.google.com/forum/#!msg/voice/aYqCm2rIPd4/mpv3OmKVEyUJ
jbrinkley said:
yes, correct. I was just trying to say that it's possible and you don't need to call att to make it happen. Under my forwarding menu
always forward =off
when busy, unanswered, unreachable = my gv #
Click to expand...
Click to collapse
So yes, in this case, I can't seem to add my Google Voice number to those fields. When I go in, all fields are "off" and if I try to input my GV number for any of them, I get an error that states "Unexpected response from network"
Even if I try to input another number altogether, i.e. my home or work number, I get the same response.
I was having this same issue with my Nexus 5X using a new At&t nano sim. To resolve it, I had to call and speak with Customer Service. I explained that I wanted to setup Conditional Call Forwarding for all three conditions (busy, unreachable, unanswered) and they were able make the changes. I checked the Call Forwarding Settings screen immediately after hanging up and confirmed the correct Forwarding # was in place.
letM3in said:
I was having this same issue with my Nexus 5X using a new At&t nano sim. To resolve it, I had to call and speak with Customer Service. I explained that I wanted to setup Conditional Call Forwarding for all three conditions (busy, unreachable, unanswered) and they were able make the changes. I checked the Call Forwarding Settings screen immediately after hanging up and confirmed the correct Forwarding # was in place.
Click to expand...
Click to collapse
I have changed phones between iOS and Android several times, never had issues with GV until my first Nexus (which is the 5x). The MMI codes that GV gives would not work, and from the call screen, if i clicked on the (...) in the top right corner i could go to 'settings', but it still wouln't take my GV number.
I spent 2 hours with ATT, she was very very helpful and got "advanced support" to help. Eventually, ATT changed all 3 of my "conditional call forwarding" to my GV number, but it still went to my ATT voicemail. ATT lady started to conference Google in for help. I had to leave the call, but several hours later i started getting VM thru GV. I'm not sure if the conditional call forwarding numbers just needed time to activate across the network (ATT Lady said that it didn't), or if when she spoke to Google they figured something out.
Good luck everyone. The problem is resolvable with ATT help, I wish I had more details to provide.
I just called my 5X and I got my GV message for when a call is missed. I am coming from a Moto X 2014 that had GV setup as the VM and all I did was move my sim from that phone to the 5X. Not that this helps anyone with a problem, but figured I would chime in on my scenario that does work.
I was having same issue... Seems the only way to resolve is to contact Att. The CSR I spoke with on chat was very knowledgeable of this issue and resolved it in less than 5 minutes. Even still... It's an unnecessary inconvenience
I've had this issue in the past, it randomly started happening on my prior M8. Nothing worked...no MMI codes, online meetings, manual call forward numbers, nothing...I ended up getting it resolved by having ATT advanced technical support manually edit the forwarding scenarios and numbers on the back end. Even they were confused as to why it was happening, and I had to get to the second level of advanced support before the technician had the correct access rights to edit the numbers. This was back in July-ish, and they had been apparently going through some significant "non-cystomer-facing" changes to their backbend VM systems.. All GV working fine for me asof now, and I'm still using the same Nano-SIM card on my 5X that cane from that M8.