Hiya, I got a BT800 for Christmas from my lovely wife and am having a hell of a time getting it to activate voice dialling!
Having paired it and chosen to use it as the hands free device, I can use it for phone calls that I start from the phone, but the Exec doesn't do anything when I 'tap' the answer button (one beep) or squeeze it(beep, pause, beep).
I've even just restored the original rom (hard-reset, basic install) and it still doesn't do anything...
Did anyone else have this problem? Is there a stage I'm missing out?
Hope someone can help, I've a nasty feeling it's too late to return it to Amazon...
Might be a daft question, but have you added your voice tags (or re-added after hard reset)?
Thanks for the reply, I was never intending to use voice speed dial (preferring voice command by miles) and so didn't record any tags. Even without any, you should still get the app launching and a message that there aren't any tags recorded. My problem was that I wasn't even getting that.
I can't claim to have solved the problem, but at least I no longer have it! I reinstalled the original O2 ext_rom and did a nice clean "Basic" install then put my customised ext_rom back and reset again. Having paired the headset I was able to launch voice speed dial from it, so went ahead and installed voice command, made the registry change to launch VC from the headset and am laughing.
I wish I knew what had caused the problem so I could avoid doing it again! I suspect that it was an attempt to restore my bluetooth registry settings on a rebuild that was the cause... Certainly I didn't try to set it up automatically the second time round and it *did* work, but there are too many variables to be sure.
HTH someone!
The Universal has no NATIVE support for Voice Dial using Voice Command. You have to do the following so it will work via VOICE COMMAND as it has to bypass the Installed Vocie software:
Install Voice Command to the default location.
Fire up a registry editor
Go to: HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
Modify the string marked "path" from the default \Windows\SDDialer.exe to \Program Files\Voice Command\VoiceCMD.exe
This should now launch Voice Command
Maybe you made a mistake like missing a letter?
If you have done the above and it still doesnt work, then i'm just as lost as you are
sorry, browser problem, message was posted twice
I'm using the BT800 with my Qtek 9000 (Original ROM) and don't have any problems with voice dialing. After pressing the button on the Jabra within a second or 2 the voice dialing application is started, I hear a start sound, speak the name and it automatically starts dialing.
I have installed the latest BT800 firmware (becaus of the international dialing bug) and had not tested this functionality with the original firmware. Which firmware are you using?
MvanIperen said:
I'm using the BT800 with my Qtek 9000 (Original ROM) and don't have any problems with voice dialing. After pressing the button on the Jabra within a second or 2 the voice dialing application is started, I hear a start sound, speak the name and it automatically starts dialing.
I have installed the latest BT800 firmware (becaus of the international dialing bug) and had not tested this functionality with the original firmware. Which firmware are you using?
Click to expand...
Click to collapse
Which button do you have to press to activate the voice dial? The left or the right button under the LCD? Is it Tap or Hold, the button i mean?
@jorgee: 1st post - thanks, that's what I meant earlier when I said I'd done the reg fix and it all worked
2nd post - to activate voice dialling on a UK O2 Exec, you press the 2nd button from the left on the front of the device - next to the camera button.
@ MvanIperen, I'm using the latest BT800 firmware too, when I did a couple of rebuilds, the problem went away and it now behaves as you describe.
@ all, thanks for the replies! It was just me after all! Mental note: Mess with the registry at your peril!
[quote="this_mike
2nd post - to activate voice dialling on a UK O2 Exec, you press the 2nd button from the left on the front of the device - next to the camera button.
[/quote]
I meant is there anyway to activate voice dial from the headset? Can i only activate it by pressing the voice command button? I mean lets say my phone's in my drawer and i have the BT800, do i have to pull out the phone to be able to use the voice dial?
Jorgee said:
I meant is there anyway to activate voice dial from the headset? Can i only activate it by pressing the voice command button? I mean lets say my phone's in my drawer and i have the BT800, do i have to pull out the phone to be able to use the voice dial?
Click to expand...
Click to collapse
Maybe I misunderstand what you're asking.
You posted the registry change to make this work higher up the page.
Pressing the answer button on the headset does fire up Voice Command but only if the display is open or in portrait mode. If it's closed in your pocket protecting the screen then it won't work
I've never installed voice command, i was talking about the built in voice dial application. If the QTEK is in my pocket, and i want to call someone, which button on the headset/BT800 do i press to activate voice dial? And is it push or push and hold? Do i ghet any kind of audible warning telling me i can start speaking the voice tag?
I hope this time i am a bit clearer, sorry for the previous confusing post.
Jorgee said:
I've never installed voice command, i was talking about the built in voice dial application. If the QTEK is in my pocket, and i want to call someone, which button on the headset/BT800 do i press to activate voice dial? And is it push or push and hold? Do i ghet any kind of audible warning telling me i can start speaking the voice tag?
I hope this time i am a bit clearer, sorry for the previous confusing post.
Click to expand...
Click to collapse
On the BT800:
- To activate voice dialling (whether using MS Voice Command or the 'standard' voice dialling app) using a BT800 headset, press briefly the button nearest the headset microphone.
- To redial from the headset the last number dialled, press and HOLD the button nearest the headset microphone.
This works for me whatever situation the Exec is in: open, closed, portrait, landscape. I'm using the default voice-dialling software, not the MS one. Hope this helps.
Thanks SiliconS,
That was the answer i was looking for, sorry i had to bother you guys instead of reading the manual as my manual is in Spanish and i am only a beginner-intermediate level reader.
Again THANKS!!!! Very appreciated
Are any of you folks running WM2003SE? See, I was able to make that registry change and do a soft reset and have Voice Command working through the BT headset on my old machine, but it was running WM2003 (not the second edition version). From what I have read, SE doesn't seem to like that registry change, as when you make it, all that will happen is the connection opens when you tap the button on the HS, but the ability to use VC is not there.
I know there must be some way to do this. Any opinions or suggestions would be fab!
Thanks much!
Please need help to activate CSVD over BT in TP2,
I can end the call over BT, redial, but I can't start voice dial.
When I press BT button to start voice dialing nothing happens. Voice dialing enable only if I press key on the phone. Thank you.
cybersergey said:
Please need help to activate CSVD over BT in TP2,
I can end the call over BT, redial, but I can't start voice dial.
When I press BT button to start voice dialing nothing happens. Voice dialing enable only if I press key on the phone. Thank you.
Click to expand...
Click to collapse
This is an issue with certain roms on TP2 ... does not work via BT headset on MVC either on my T7381... just off the phone to HTC tech (long running saga) and he advised wait for new rom update .... HTC tested as working on their model TP2 but not on my 1.19.841.3 rom
Hi All,
I use TMO TP2. I have some inconvenience when answer the call with button on BT device, it cannot accept call with one press as before. It just transfer ringtone from phone to my BT. I need to press accept call on phone again. If I press accept button on BT again. The call is drop.
I don't sure what i have modified setting or registry that related or not?
Thank you.
Greetings!
I have my Desire running MIui GB and it is fantastic.
I prefer using a bluetooth headset rather than talking to the phone directly.
The problem comes when the headset is inside a pocket ,and its buttons are pressed.
On a single button tap i had voice dial popping on the screen.
There were false matches by the voice dialing app and random calls were made.
This was easily disabled, simply by deleting VoiceDialer.apk from the ROM.
The other problem that i haven't found a solution yet, is when the button of the headset is pressed twice.
When that happens, the phone redials the last number, bypassing any lock screen. It is happening quite often actually.
Anyone knows how can i disable that?
Bluetooth headsets are suppose to go on your head, not in your pocket.... seriously.
Sent from RCMixS
Does your headset have key lock? Or u could buy an extra pocket for the headset.
Meaple said:
Bluetooth headsets are suppose to go on your head, not in your pocket.... seriously.
Sent from RCMixS
Click to expand...
Click to collapse
Meaple in my places they say that " If you don't have something to say, don't speak". Seriously...
mrvanity said:
Greetings!
The other problem that i haven't found a solution yet, is when the button of the headset is pressed twice.
When that happens, the phone redials the last number, bypassing any lock screen. It is happening quite often actually.
Anyone knows how can i disable that?
Click to expand...
Click to collapse
I found a workaround by chance just now. After I installed dialer for JAJAH service that I use I got a dialog asking what program to use after clicking BT button.
As long as i don't select USE BY DEFAULT it stops at that dialog and doesn't dial.
Please all, lets keep it on topic and with respect.
Thanks for your cooperation.
(1) A long press on the headset button takes me to Google Now. I'd like it to take me to S-Voice instead for hands-free control of the phone. I can't find a setting for that. Does anyone know if one exists?
(2) When you use S-Voice to place a phone call, is there a way to have S-Voice ask for confirmation before dialing? Or else to cancel the dialing via a voice command?
Gary02468 said:
(1) A long press on the headset button takes me to Google Now. I'd like it to take me to S-Voice instead for hands-free control of the phone. I can't find a setting for that. Does anyone know if one exists?
(2) When you use S-Voice to place a phone call, is there a way to have S-Voice ask for confirmation before dialing? Or else to cancel the dialing via a voice command?
Click to expand...
Click to collapse
To bring up s voice you have to double tap the middle button to open it. Not sure about your second questions I don't use s voice, I prefer google now over it.
Gary02468 said:
(1) A long press on the headset button takes me to Google Now. I'd like it to take me to S-Voice instead for hands-free control of the phone. I can't find a setting for that. Does anyone know if one exists?
(2) When you use S-Voice to place a phone call, is there a way to have S-Voice ask for confirmation before dialing? Or else to cancel the dialing via a voice command?
Click to expand...
Click to collapse
What is the headset button? Does anyone know how to use s voice to set phone to silent?