Develop Bugs

MDA PRO TMOBILE USA SETTINGS

HI all, thanks here for all your help. I finnaly have my unlock code from T-mobile UK, for 30 pounds, but i think it is workth it.
Now using the PRO as a phone, it is kinds weird to get used to. I live inthe US and i put my T-MOble US sim card in, when i check the settings, i found out for some strange reason that the GSM band it was using was EGSM+DCS1800, i don't know what this band is, but i noticed that i don;t get enought bars, always loosing signal, and i have put the new 1.08 radio rom on it. My SK65 gets better signal.
The only other option i see there for GSM band is PCS1900, so i have manually set it to this. My question is, which band should i be using? whats the diffrence? and when setting up WAP for MMS, do i use WAP1.2 or WAP2.0.
Also does the UTMS2100 mean it will work on Sprints 2100 network?
Thanks.

Search is your friend
All of the Universal forums are full of information about why the MDA Pro is not as useful in the US because it is just Tri-Band. T-Mo USA uses GSM/GPRS 1900 for voice and data. You need to stick to this band alone. Try using WAP 1.2 for WAP. There's no EDGE available on the Uni.
No, Sprint won't work It's different technology using a different standard. You can only use UMTS in Europe, the Middle and Far East. That's why this device is targeted for these markets and was never brought to North America. And it never will be.
Let's hope the successor to the Universal can do it by incorporating the latest technologies prevalent in North America.

Unlocked TELUS PRO2 does not work on FIDO 3G network?

I bought HTC PRO2 (RHOD500) from Telus. I just noticed that it does not work on fido 3G network. GSM is fine.
If the Hard-SPL for world phone is released, can I use 3G fido network at that time?
Thanks

You can pay to get it sim unlocked now and it will work. Search for tmobile unlock on ebay. I am on Telus and it works perfect.

leanne said:
You can pay to get it sim unlocked now and it will work. Search for tmobile unlock on ebay. I am on Telus and it works perfect.
Click to expand...
Click to collapse
I knew that, and my phone has been unlocked. I can make phone call without any problem.
However, I can not use it with fido 3G network.
It does not work at all

Hey,
I don’t think its the phone . I have seen this issue many times in the past All your data settings are still set up for TELUS and the CDMA network, It’s not as simple as just unlocking the SIM card to get the data to work you have to go in an re-program the phone. I would suggest finding the Data setting on a Windows mobile device Fido has and just copying those into you Touch Pro 2. (you will most likely need to do this by hand)
Can’t promise it will work as I know some Carriers have certain fields added and removed to fit their needs which messes up the phone when you unlock it to use on other networks.

Wait!!
does this mean the RHOD500 has GSM and CDMA??
--- Does this mean?
1. Buy Telus TP2
2. Unlock
3. Switch to Fido/Rogers
4. Flash 6.1 GSM rom
5. Use 3g?

I think the issue here is that the Telus TP2 has had the 850/1900MHz UMTS bands disabled for some retarded reason. (Seems especially retarded seeing as how they are rolling out a UMTS network running on those bands in a couple of months).
There is speculation that the bands physically exist on the Telus TP2 but they have been software disabled. The other possibility is that the hardware is not physically present to utilize the 850/1900MHz bands that Fido/Rogers use for their 3G data and that the Telus TP2 will never work on their 3G networks (as well as its own upcoming one) but I think that would be a seriously regretful move on Telus' part.
The spec sheet for the MSM7600 indicates that the phone may or may not be capable of using the 850/1900MHz bands, but according to HTC and Telus' specifications it definitely is able to use the 2100MHz bands (which makes zero sense in Canada since nobody will be using those bands for a long time).

Rick#2 said:
I think the issue here is that the Telus TP2 has had the 850/1900MHz UMTS bands disabled for some retarded reason. (Seems especially retarded seeing as how they are rolling out a UMTS network running on those bands in a couple of months).
There is speculation that the bands physically exist on the Telus TP2 but they have been software disabled. The other possibility is that the hardware is not physically present to utilize the 850/1900MHz bands that Fido/Rogers use for their 3G data and that the Telus TP2 will never work on their 3G networks (as well as its own upcoming one) but I think that would be a seriously regretful move on Telus' part.
The spec sheet for the MSM7600 indicates that the phone may or may not be capable of using the 850/1900MHz bands, but according to HTC and Telus' specifications it definitely is able to use the 2100MHz bands (which makes zero sense in Canada since nobody will be using those bands for a long time).
Click to expand...
Click to collapse
This isn't extremely helpful, but
http://web.archive.org/web/20071025232258/www.cdmatech.com/download_library/pdf/msm7600_chipset.pdf
according to that (if I'm reading right) there has to be at least 1 other UMTS band, no configuration is ONLY 2100MHz (the chipset that does only that doesnt do the 1900MHz PCS band for CDMA). But really, I'm pretty much guessing.

Hi I am using the unlocked Telus version on Fido. It's true that you can't use 3G because the phone does not support the required bands. But I still use EDGE. It's slower but better than nothing. Create a new connection and name it Fido. APN is : internet.fido.ca
Username: fido
PW: fido
Hope this helps.

https://www.telusmobility.com/en/QC/htc_touchpro2_t7379/index.shtml
Go to this site, click on the Details button and you'll see that the TP2 supports all of the above mentioned Bands. The bands are all software locked and once Telus initializes the new network (along with WinMo 6.5) they will offer the firmware upgrade to open ALL the GSM bands. It'll just be the question of unlocking the simlock on the device!

wraith79 said:
https://www.telusmobility.com/en/QC/htc_touchpro2_t7379/index.shtml
Go to this site, click on the Details button and you'll see that the TP2 supports all of the above mentioned Bands. The bands are all software locked and once Telus initializes the new network (along with WinMo 6.5) they will offer the firmware upgrade to open ALL the GSM bands. It'll just be the question of unlocking the simlock on the device!
Click to expand...
Click to collapse
I think that maybe you are confusing GSM bands with the UMTS/HSPA bands.
There's a big difference between the GSM/Edge bands and WCDMA/UMTS.
I have been following the subject and there`s no concrete evidence that the 850/1900 WCDMA/UMTS bands are only software.
Where the hell did you get your firmware upgrade information? I've only seen this info given as pure speculation!
If the TouchPro 1 is any indication, the phone might be missing some key components to make it work. In the case of the TP1 it was the amplifier that was missing so it couldn't work even chipset and everything could support it.
(see: http://forum.xda-developers.com/showthread.php?t=420865&page=40)
So while it's possible, until someone does a teardown of the phone and we see all the required component it's simply not possible to say that 3G on a GSM network is possible.
The ONLY indication I have seen that it might support 850/1900 HSPA network is the fact that telus stated that the Tour and Storm will not work on the HSPA network. They failed to mention the TP2 so maybe we can read between the lines:
http://mobilesyrup.com/2009/08/16/t...be-compatible-with-the-canadian-hspa-network/

Axeslocked said:
Wait!!
does this mean the RHOD500 has GSM and CDMA??
--- Does this mean?
1. Buy Telus TP2
2. Unlock
3. Switch to Fido/Rogers
4. Flash 6.1 GSM rom
5. Use 3g?
Click to expand...
Click to collapse
Oh and please never flash a GSM rom on a CDMA / World phone!

labbbby said:
Oh and please never flash a GSM rom on a CDMA / World phone!
Click to expand...
Click to collapse
lol.. I second that

UMTS Bands
labbbby said:
I think that maybe you are confusing GSM bands with the UMTS/HSPA bands.
There's a big difference between the GSM/Edge bands and WCDMA/UMTS.
I have been following the subject and there`s no concrete evidence that the 850/1900 WCDMA/UMTS bands are only software.
Where the hell did you get your firmware upgrade information? I've only seen this info given as pure speculation!
If the TouchPro 1 is any indication, the phone might be missing some key components to make it work. In the case of the TP1 it was the amplifier that was missing so it couldn't work even chipset and everything could support it.
(see: http://forum.xda-developers.com/showthread.php?t=420865&page=40)
So while it's possible, until someone does a teardown of the phone and we see all the required component it's simply not possible to say that 3G on a GSM network is possible.
The ONLY indication I have seen that it might support 850/1900 HSPA network is the fact that telus stated that the Tour and Storm will not work on the HSPA network. They failed to mention the TP2 so maybe we can read between the lines:
http://mobilesyrup.com/2009/08/16/t...be-compatible-with-the-canadian-hspa-network/
Click to expand...
Click to collapse
I have been following this debate on multiple forums.
Based on some information from RileyFreeman, I do think Telus will enable the TouchPro2 for new HSPA network.
Granted, today, you can unlock and use on Rogers, Fido or ATT networks using EDGE, it would be a real poor move for Telus to not have an upgrade path to HSPA.
This is Telus's non Blackberry flagship business device, today, Telus has Enterprise customers testing the HSPA network (likely either PC cards or USB modems). Once HTC releases Windows Mobile 6.5, this would be an ideal time to upgrade the radio's and unlock the 850/1900 UMTS bands.
I can see the 850/1900 bands today, not 100% if they are actually there, also wondering if Telus is also waiting for ATT to release TP2 so ATT can test ROM, Sprint nor Verizon would not have any need to do any regression testing on ROM that supports UMTS bands. Tell tale sign will be if ATT TP2 has same chipset as Telus TP2.
I am crossing my fingers that TP2 will support Telus Canadian SIM.

I agree with you points. By seing the bands you mean in windows mobile band selction settings? If so these are always there.
I highly doubt ATT will use the same chipset as Telus since they use the MSM7600 to support both GSM and CDMA. ATT as no need for CDMA.
Also to support my claim:
ATT is RHOD300 device.
I think Telus is RHOD500 and Sprint is RHOD400 (can't find this info but I know 400/500 are both world phone, so it might be the opposit or something)
Different RHODXXX indicates differents innards.
Bottom line I want a TP2 with 3G on Fido so Im crossing my finders too!
Edit:
http://www.engadget.com/2009/06/04/atandts-htc-touch-pro2-hits-the-fcc/
So that's Rhodium 100 for T-Mobile, 400/500 for Sprint and Verizon (or vice-versa) and 300 for AT&T
Noob mistake on my part I think the Rhodium XXX is FCC ...so why did I think Telus was in there =\

Sprint is RHOD400, Verizon and Telus both are RHOD500.

Let me get this straight - So TP2 is not a true "world phone"?

I'm a little green when it comes to 3G stuff, but please correct me if I am wrong...
Yes, you can put foreign SIM cards in US TP2's but not get 3G coverage in Europe. On the other hand from what I have read, European TP2's (even the unbranded ones) will not work with 3G is the US.
And if I am wrong... can someone please point me to a TP2 that will work on 3G networks in most of the world?
Or does one have to have two TP2's to enjoy 3G.. one for the US, and one for Europe, etc.?

quid246 said:
I'm a little green when it comes to 3G stuff, but please correct me if I am wrong...
Yes, you can put foreign SIM cards in US TP2's but not get 3G coverage in Europe. On the other hand from what I have read, European TP2's (even the unbranded ones) will not work with 3G is the US.
And if I am wrong... can someone please point me to a TP2 that will work on 3G networks in most of the world?
Or does one have to have two TP2's to enjoy 3G.. one for the US, and one for Europe, etc.?
Click to expand...
Click to collapse
Where have you heard that a NA TP2 won't work with 3G in EU?
The only limitation I'm aware of is a NA TP2 won't work w/ NA GSM 3G.

Oh SoS said:
Where have you heard that a NA TP2 won't work with 3G in EU?
The only limitation I'm aware of is a NA TP2 won't work w/ NA GSM 3G.
Click to expand...
Click to collapse
Until someone hacks it

I can't remember where I read it. But someone said if you wanted 3G in Europe, better to get a Euro unbranded model.
So perhaps this is under the assumption that it isn't hacked... not sure.
Slightly, off-topic Q but rather than start a new thread.... once a HardSPL is out for both the CDMA and GSM TP2's... will they effectively be "equal" devoces?
I really would like to pick-up a TP2 in the next few days... I like the VZ unit, but it's CDMA and since I travel quite a bit, really prefer and need more of a GSM phone, but don't like the TMO as no 3.5mm jack.

quid246 said:
I can't remember where I read it. But someone said if you wanted 3G in Europe, better to get a Euro unbranded model.
So perhaps this is under the assumption that it isn't hacked... not sure.
Slightly, off-topic Q but rather than start a new thread.... once a HardSPL is out for both the CDMA and GSM TP2's... will they effectively be "equal" devoces?
I really would like to pick-up a TP2 in the next few days... I like the VZ unit, but it's CDMA and since I travel quite a bit, really prefer and need more of a GSM phone, but don't like the TMO as no 3.5mm jack.
Click to expand...
Click to collapse
The Verizon unit already has international GSM bands unlocked, AND international (2100MHz 3G). If you've been a Verizon customer for 60 days or more you can call them up and get an unlock code for free and use any SIM card in your phone so you can get a cheap prepaid SIM and not pay the high Verizon roaming costs. There's also a small (I'd say around 25%) chance that the NA 3G bands will be found/unlocked, but at this point who really knows if they are there or not.

Actually the Telus CDMA TP2 supports the European 3G bands but not the American ones becuase technically you will be using it in North America on CDMA and outside America on GSM. So its the other way around

It seems that if you have the Sprint TP2 that it won't register at all on US GSM networks, but comes unlocked by default.
On Verizon (which I have) a simple phone call to support they'll give you the unlock code and you're good to go. I use an Orange (UK) Sim in mine just fine in the US and others in other forums have reported that using US SIM's from TMobile/AT&T work fine also in the US.
--chris

TP2 = best 'World' phone I've ever owned.
quid246 said:
I'm a little green when it comes to 3G stuff, but please correct me if I am wrong...
Yes, you can put foreign SIM cards in US TP2's but not get 3G coverage in Europe. On the other hand from what I have read, European TP2's (even the unbranded ones) will not work with 3G is the US.
And if I am wrong... can someone please point me to a TP2 that will work on 3G networks in most of the world?
Or does one have to have two TP2's to enjoy 3G.. one for the US, and one for Europe, etc.?
Click to expand...
Click to collapse
I have an unbranded HTC factory TP2, and it works in 3G mode anywhere I take it that has the 3G network... and I travel all over the US/Caribbean and back to EU/UK. Have not found one spot it hasn't worked (inlcduing some of the very obscure Carib countries), and I like the fact that it automatically picks up HS when within range without having to change any settings.
Just have to make sure that your provider gives you a 3G SIM (most of them are these days) and that you have the 3G service enabled on your account in the respective country.
Many people say they can't pick it up yet don't have it on their account, or think that their EU provider will automatically provide it as part of the roaming service... which is not a good assumption to make.

TyTanIc said:
I have an unbranded HTC factory TP2, and it works in 3G mode anywhere I take it that has the 3G network... and I travel all over the US/Caribbean and back to EU/UK. Have not found one spot it hasn't worked (inlcduing some of the very obscure Carib countries), and I like the fact that it automatically picks up HS when within range without having to change any settings.
.
Click to expand...
Click to collapse
3G in North America? I doubt that. The phone does not support North American 3G bands. Are you sure it was 3G in North America??

Man, this is all confusing... I swear somebody has to come up with an HTML table of what phones work with what and where and stickify it.

Can people just put this to bed already!!!
The Sprint (North America) TP2 is suppossed to be used on CDMA in the US and GSM worldwide, hence the GSM radio is unlocked for outside America GSM use. This is how it comes default. If that is so hard to grasp, then there is no hope for some, sadly.
As for the title, the TP2 is a world phone, it works in the US (and North Ameria) on CDMA and elsewhere unlocked on GSM. That to me is the true definition of a World phone from a U.S CDMA perspective (and especially moreso as this is the CDMA version).
To put it in perspective, a Sprint customer (in this case, moi) gets the best of CDMA in the U.S and when traveling to visit his sister in High Wycombe in the U.K (like i'll be doing this Autumm) gets to pop in a PAYG U.K sim in the same phone and use it while over there. This phone doesn't get any "worldlier" to me than this scenario!!
Is the O.P attempting to specifically define a dual mode CDMA/GSM-unlocked World phone as not world phone because it's locked by default from doing GSM in it's primary market which happens to be CDMA (and in this case Sprint)?
This is not rocket science folks, it really isn't.

LordLugard said:
Is the O.P attempting to specifically define a dual mode CDMA/GSM-unlocked World phone as not world phone because it's locked by default from doing GSM in it's primary market which happens to be CDMA (and in this case Sprint)?
Click to expand...
Click to collapse
Point taken. It's just that with that same Sprint phone (correct me if I am wrong), you can't travel to Canada pop in a Rogers SIM card and get Rogers 3G.
Wouldn't the phone want to swing towards it's CDMA cousin, Telus or Bell?

mmmhhh86 said:
3G in North America? I doubt that. The phone does not support North American 3G bands. Are you sure it was 3G in North America??
Click to expand...
Click to collapse
AT&T 3G runs on 850/1900 GSM, the TP2 supports both of those bands, how would it not work with 3G on AT&T in the US?
T-Mobile runs 3G on 1700/2100 GSM bands, both of which aren't included on the TP2, as far as my research has lead me to believe.

Basically while it may be a quad band GSM phone, it is only a dual band 3G device. It comes in two flavours - UMTS 900+2100 or UMTS 1900+850
The 900/2100 version is far more common than 850/1900

.mak said:
AT&T 3G runs on 850/1900 GSM, the TP2 supports both of those bands, how would it not work with 3G on AT&T in the US?
T-Mobile runs 3G on 1700/2100 GSM bands, both of which aren't included on the TP2, as far as my research has lead me to believe.
Click to expand...
Click to collapse
It supports those bands for HSDPA CDMA not GSM 3G
Network 3G EVDO Rev A (800/1900 MHz), UMTS/HSPA (2100 MHz), GSM/ EDGE (850/900/1800/1900 MHz)
This is the Telus version btw

quid246 said:
Point taken. It's just that with that same Sprint phone (correct me if I am wrong), you can't travel to Canada pop in a Rogers SIM card and get Rogers 3G.
Wouldn't the phone want to swing towards it's CDMA cousin, Telus or Bell?
Click to expand...
Click to collapse
"it Depends"
The US CDMA phone operates in 3 modes.
1 CDMA Only
2 GSM Only
3 'Global' (whatever it can find).
If you have it in Global it will generally take the CDMA local carrier over anything else. However, not always. I've had mine switch to GSM for a bit then go back to CDMA. But mine is Verizon and unlocked so it works everywhere in the US and I also have a UK sim card in it. So I'm a little 'different'.
But, in any case, you can tell the phone which mode to use if you want. All upto you.
--chris
(verizon TP2)

here we go again... (tp2 3g na)
"I have an unbranded HTC factory TP2, and it works in 3G mode anywhere I take it that has the 3G network... and I travel all over the US/Caribbean and back to EU/UK. Have not found one spot it hasn't worked (inlcduing some of the very obscure Carib countries), and I like the fact that it automatically picks up HS when within range without having to change any settings."
So, maybe he's wrong. But either way...
You wanna know why this keeps coming up again and again?
(not because we're all dumb and thick headed, which we may very well be)
But,
Because we just have trouble imagining them hardware "band amplifier" hobbling the hardware when it's so much easier to do it somewhere in firmware.
We all know that the less you fiddle with the hardware for multi-region functionality the less you have to fiddle with the production line and fiddling with the production line is the Last Thing a manufacturer wants to do.
Someone even once said that there wasn't room in the Rhodium platform for quad band data support. But now we're expecting the tilt 2 to do just that.
So, all protestations aside, those of us who paid ~700 us clams for this beauty, and who like the kbd layout.
And who have like me (as quite the Early Adopter), forked out for an sx56, sx66, 8135, x7510((quad band data)
Just feel a leetle wee bit of a sense, dare I say it, of Entitlement for the TP2 to be enabled into a fully world wide phone.
So we keep hunting, and digging, and dreaming, and .... posting.....

well here is my two cents i have the original unlocked euro version of the tp2 and all i get in the us it edge. it is really impossible to get 3g in the US (2100) because this version of the phone literally does not have the attena for it. and so that you can see all the different types of tp2s and the technical and physical differences between them here is a link: http://pdadb.net/index.php?m=pdacom...&id3=1792&id4=1829&id5=1766&id6=1989&id7=1751

drae1980 said:
well here is my two cents i have the original unlocked euro version of the tp2 and all i get in the us it edge. it is really impossible to get 3g in the US (2100) because this version of the phone literally does not have the attena for it. and so that you can see all the different types of tp2s and the technical and physical differences between them here is a link: http://pdadb.net/index.php?m=pdacom...&id3=1792&id4=1829&id5=1766&id6=1989&id7=1751
Click to expand...
Click to collapse
3g in the USA must be on the 1700 band then, as thats the only gsm band that the euro version doesn't support.
Euro version
GSM850, GSM900, GSM1800, GSM1900, UMTS900, UMTS2100
TMOUS version
GSM850, GSM900, GSM1800, GSM1900, UMTS1700, UMTS2100

Anyone know of a good site to order a prepaid SIM card? I plan on using my VZW TP2 in Spain and France. I was also wondering if I should or could disable data and use my TP2 with Garmin XT so I don't get nailed for data usage. Your thoughts would be appreciated...
Mugs

[Q] Android GSM Radio

I am on Wind, a new Canadian 3G AWS only network that defaults to (roams) Rogers GSM when the signal is weak. I have noticed that the sensitivity on WM 6.5 seems to be much more better than on Android in that I can select Wind inside my home in Windows but the Phone will not find Wind as an available network on Android. I have not selected "2G networks only". I would have assumed that the Android build uses the same radio software.

It uses the same radio firmware if that's what you mean. Hardly the same at the software level...
Either way with Android you get a choice - GSM or CDMA. You can't flip between (to my knowledge...) while in the OS as you have to change that value in the startup.txt to get either GSM or CDMA service.
I think there may be a way to adjust startup values on the fly, but it's certainly not straightforward as I recall. I'll see what I can drum up, but that is your problem I believe.

Thanks, some more background: Both networks are GSM, one (Wind) 3G on 1700 and 2100 and the other standard north American 2G GSM (850 and 1900). As far as I know the roaming agreement does not allow my phone to use the 3G part of the Rogers network. The phone is originally t-mobile GSM - otherwise it would not work on Wind.
I really do not think that CDMA comes in to the equation.

manfredv said:
Thanks, some more background: Both networks are GSM, one (Wind) 3G on 1700 and 2100 and the other standard north American 2G GSM (850 and 1900). As far as I know the roaming agreement does not allow my phone to use the 3G part of the Rogers network. The phone is originally t-mobile GSM - otherwise it would not work on Wind.
I really do not think that CDMA comes in to the equation.
Click to expand...
Click to collapse
Ah, I misread your post. I apologize... not sure what you would need at this point but I'm not sure anyone else is doing what you're trying to do... Hopefully someone who is chimes in

Android GSM Radio
@arrrghhh
I probably did not state it clearly.
I have a t-mobile (US) Touch Pro 2 that is unlocked. When I use it in WM 6.5 at home I get to select the Wind network as an option. When I use the phone in Android mode I do not get to see the Wind network at all but only the Rogers network that Wind roams on as the Rogers network is much larger than the Wind network. Is the problem with less sensitive GSM radio software or are there some selections such as "data enabled" or "2G network only" that I have not made correctly?

I don't believe so, and I've heard GSM reports what service it is getting from the tower ID - so perhaps the towers you're connecting to are still Rogers even tho Wind probably leases tower space from them...
Unfortunately I don't have this ability, and I'm not sure anyone else uses GSM in this manner - I'll poke around and see if I find anything that is useful.

[Q] Unlocked i927 on T-Mobile?

Hi,
I have just received an AT&T Captivate Glide i927 unlocked. I put my T-Mobile Monthly4G sim card in the phone, and can make/receive calls etc. as expected. I wasnt expecting to get 4G (I'm not sure the radio is capable of operating on TMobile's 4G?) but I only get Edge and no 3G.
I checked the APN settings and they are correct for TMobile.
Could someone advise what I may have set incorrectly? The phone should work at least on 3G, correct?
Thanks!

snigfargle said:
Hi,
I have just received an AT&T Captivate Glide i927 unlocked. I put my T-Mobile Monthly4G sim card in the phone, and can make/receive calls etc. as expected. I wasnt expecting to get 4G (I'm not sure the radio is capable of operating on TMobile's 4G?) but I only get Edge and no 3G.
I checked the APN settings and they are correct for TMobile.
Could someone advise what I may have set incorrectly? The phone should work at least on 3G, correct?
Thanks!
Click to expand...
Click to collapse
To partially answer my own question: perhaps the phone won't work on TMobile's 3G. The phone has HSDPA 850 / 1900 / 2100 frequencies, but the TMobile network has (according to Wikipedia):
1900 MHz UMTS/HSPA/HSPA+ 3G/4G
1700/2100 MHz UMTS/HSPA/HSPA+ 3G/4G[38]
1700/2100 MHz LTE 4G
Does this mean it would only work on 1900MHz or 2100MHz?
Will the Captivate automatically select the right frequency if it's available, for 3G/4G?
Thanks!

snigfargle said:
Hi,
I have just received an AT&T Captivate Glide i927 unlocked. I put my T-Mobile Monthly4G sim card in the phone, and can make/receive calls etc. as expected. I wasnt expecting to get 4G (I'm not sure the radio is capable of operating on TMobile's 4G?) but I only get Edge and no 3G.
I checked the APN settings and they are correct for TMobile.
Could someone advise what I may have set incorrectly? The phone should work at least on 3G, correct?
Thanks!
Click to expand...
Click to collapse
If it follows the bands of Apple's phones, your phone should at least get 3G(UMTS) when it does reach your area. The problem is that T-Mobile has not finished their upgrades.
Unless you really have to have 3G/4G, I'd wait until T-Mobile completes their conversion.

sethstorm said:
If it follows the bands of Apple's phones, your phone should at least get 3G(UMTS) when it does reach your area. The problem is that T-Mobile has not finished their upgrades.
Unless you really have to have 3G/4G, I'd wait until T-Mobile completes their conversion.
Click to expand...
Click to collapse
Thanks for this astute comment, which led me to e.g. this:
http://www.macrumors.com/2012/05/08...for-iphone-by-end-of-2012-lte-coming-in-2013/
Basically it seems that TMobile 3G/4G may start to work on the 1900MHz band by the end of this year, which would
mean the Captivate Glide would move off Edge and onto the higher speeds.