Hi! I've got a little problem with this application. The only connection type I can use is 'Orange WAP' which doesn't connect me to the Internet. When I use 'Internet Share' application I can choose 'Orange Internet' which is OK. How can I change preferred internet connection in WiFi Router? HELP!
I have the same problem. Any help?
Related
Have the o2 XDA IIs. Just got it yesterday actually. Playing around with it. I tried out a lot of things and they seem to work fine except for the internet on WIFI. Its working fine on GPRS.
I have manually configured the wifi connection with the WEP, IP address, gateway and DNS.
I open Internet explorer and its not working. it says THE PAGE YOU ARE LOOKING FOR CANNOT BE FOUND. When wifi is off, it connects to GPRS and it works fine.
Anyone else have this sort of a problem? I just came upon this site today. Read about the omega battery pack pro. I installed the trial version. Seems to be a good software. Anyone know if I can obtain it for free? The set cost me a lot already.
ok.. coming back to wifi. Anyone have any ideas how I can make it work?
check dns
if you can see network in batery pack pro check if wifi gives you a dns server and an ip
if it doenst you have to check you wifi config
Hi, I have the same problem too !
Mine is XDA II, no problem to surf net when hook-up to PC throught USB cable, but not with Wifi SD card. I check IP all normal.....any idea ?
how about dns?
do you check if there is one?
you can do that with batery pack pro
and you have to set network card to internet
check it please
How do you connect to the interent? There's a catch to that question because you have the option to choose "My ISP" or "My Work Network" in the Connection Properties. You should select "My Work Network" then tick the box where it says "This network connects to the internet". If you never want to connect via gprs cause it's so damn expensive, choose "My Work Network" for both internet access options.
Hi all, Thanks for response !
My Setting:
Connections > My Work Network > Advanced > Select Networks > My Work Network > Proxy Settings > Tick: The network connects to the Internet, UnTick: The network uses a proxy server to connect to the internet.
Configure Network Adapters > My network card connects to "The Internet"
Tick: SanDisk Wi-Fi SD Card > IP Address > Tick: Use server-assigned IP address, UnTick: Use specific IP address.
Hope to solve it.......Thanks !!
I connect to Wi-fi Line with Internet, but when i Sign In the messenger dont connect to wi-fi net and turn-on the gprs or 3G
try go to:
settings -> connections -> connections -> advanced -> select networks -> change the "Programs that automatically connect to the internet should connect using:" to "My Work Networks"
If you want to use GPRS, revert the setting back.
Thanks... Work good
cornelius said:
try go to:
settings -> connections -> connections -> advanced -> select networks -> change the "Programs that automatically connect to the internet should connect using:" to "My Work Networks"
If you want to use GPRS, revert the setting back.
Click to expand...
Click to collapse
Hmmzz... this doesn't work for me.
When I'm connected to Wi-Fi and I do the setting you describe, I get the error message as shown in the attachment when I want to sign in with Windows Live Messenger. Suggestions?
Something else: when still connected to Wi-Fi and I just leave the connection settings the way they where, and I sign in with Messenger, the Messenger wants to connect by GPRS/3G (the known thing).
But when I then quickly press "Cancel" (or press cancel a few times when one time isn't enough) in the GPRS/3G connection popup, the connection build up will stop and Messenger WILL actually sign me in, seemingly using Wi-Fi.
Do you think I can assume it's really using Wi-Fi and not the cellular connection, since there's NO GPRS/3G connection icon in the top bar at that moment?
If there is no GPRS/3G connection on top bar, it's using a Wifi.
Your prob similiar to my girlfriend's Hp 6828, Just make sure you setting for connection to your hotspot is setted to connect to internet, not to connect to work. and try to set the setting first then connect your wifi. My GF's 6828 prob solve by it.
Strange isn't it?
Then let me know...
cornelius said:
If there is no GPRS/3G connection on top bar, it's using a Wifi.
Your prob similiar to my girlfriend's Hp 6828, Just make sure you setting for connection to your hotspot is setted to connect to internet, not to connect to work. and try to set the setting first then connect your wifi. My GF's 6828 prob solve by it.
Strange isn't it?
Then let me know...
Click to expand...
Click to collapse
aneh juga yach bro....
cheers
indra9110
Ever since i installed wm6 (black dymond or black 3.1), I can not connect to the internet using wifi.
It show i am connected to my router with good signal, but can not access any web site using IE. I am not connecting thry a proxy.
Can anyone help?
what carrier are you using
Try to disable the proxy and see what happens...long time problem for Cingular/At&t users...
If it's just throught WiFi that you have a problem then go to Settings / Connections / WiFi
Then click on the tab for Network Adaptors and ensure that the drop-down shows ... "My network card connects to: The Internet".
There is another more detailed explanation of this elsewhere in the forums - may need to search to find it.
Multiple proxies...ugh
I'm not sure which proxy you are talking about...but on my WM6, I had to go into the Windows menu -> Programs -> Proxy Manager -> and select Disable Proxy for my Wifi to work. It seems like this program shortcut is independent from "Connections" proxy settings.
Try that and see if it works. It fixed my problem.
wratran said:
Ever since i installed wm6 (black dymond or black 3.1), I can not connect to the internet using wifi.
It show i am connected to my router with good signal, but can not access any web site using IE. I am not connecting thry a proxy.
Can anyone help?
Click to expand...
Click to collapse
I will try the proxy manger.
I do have the connect to "the internet" box checked under Wifi tab.
not linked to black only
After a lot of effort I can now connect to a secure network but have no internet either. With a unsecure network I have no problems with the internet. strange. I have tried a few roms and for me they all share this problem.
I do not have a seperate program for proxy server to disable!!
When I tried the Black Dymond, I downloaded Custals Proxy cabs as I had the same issue. Here it is....
I have black 3 and I have the same problem. When I connect to an unsecure and opened wifi, I am cannot connect with ie. I am getting "page is not found'.
I do not have the proxy manager in programs. I have selected 'internet' for wifi. any solutions?
I am unable to connect w/ a 3G connection...if I use WiFi I can make a remote desktop connection from my TyTn to my company server, but if I am on 3G I cannot connect. What am I missing?
digitalfx said:
I am unable to connect w/ a 3G connection...if I use WiFi I can make a remote desktop connection from my TyTn to my company server, but if I am on 3G I cannot connect. What am I missing?
Click to expand...
Click to collapse
make sure the connection is active before attempting to connect... so kick up internet explorer or something that initiates the connection...
I have a connection, I can see it go active then I get an error.
I tried as you suggested, the error just comes up immediatly.
ERROR:
Cannot Connect. Likely reasons are:
1. Specific Computer name does not exist
2. A network error occurred while establishing the connection.
Works fine when using WiFi or when connected to PC via USB...wont connect while on 3G
digitalfx said:
I have a connection, I can see it go active then I get an error.
I tried as you suggested, the error just comes up immediatly.
ERROR:
Cannot Connect. Likely reasons are:
1. Specific Computer name does not exist
2. A network error occurred while establishing the connection.
Works fine when using WiFi or when connected to PC via USB...wont connect while on 3G
Click to expand...
Click to collapse
mmm...i think i know your problem...
Click Start > Settings > Connections > Connections > Advanced > Select Networks... now what connection is specified in the 'Programs that automatically connect to a private network should connect using'
that should be your 'GPRS Connection' you are using to connect to your IP WAN
thanks, I had that set wrong...but still cant connect.
my 3G is setup as ISP (Cingular)...I called it "ISP"
The advanced setting had a preset called "My ISP", so I re-setup my connection and called it "My ISP" and selected it in "Programs that automatically connect to a private network should connect using:"
still wont connect.
digitalfx said:
thanks, I had that set wrong...but still cant connect.
my 3G is setup as ISP (Cingular)...I called it "ISP"
The advanced setting had a preset called "My ISP", so I re-setup my connection and called it "My ISP" and selected it in "Programs that automatically connect to a private network should connect using:"
still wont connect.
Click to expand...
Click to collapse
did you use Custel's cabs to install the Cingular Settings??
no, those always caused problems as I am using ISP not MediaNet.
btw- should have mentioned I am now using Black IV Shadow and Radio 1.43.00
Possible reason: your networkprovider has blocked the port used by remote desktop.
We had to change the gprs connection point/address when we wanted to use vpn to connect to our corporate network.
Try to get hold of at telnet application for your device and connect to port 3389 on you remote desktop server.
nadreas
digitalfx said:
no, those always caused problems as I am using ISP not MediaNet.
btw- should have mentioned I am now using Black IV Shadow and Radio 1.43.00
Click to expand...
Click to collapse
ahh well change your signature
ok... umm let me think... i want you to re-create the connections without using the My ISP... create a seperate one for Cingular...
digitalfx said:
I am unable to connect w/ a 3G connection...if I use WiFi I can make a remote desktop connection from my TyTn to my company server, but if I am on 3G I cannot connect. What am I missing?
Click to expand...
Click to collapse
I had the same problem till I created two VPN connections. One for internal use (WiFi) and one for extenal use (3G).
The internal one uses the internal IP address of the VPN server and the external one uses the external IP address.
You have to sleect which connection you want to use before starting the connection depending on whether u r using WiFi or 3G.
Hope that makes sense. It works 4 me.
GOT IT!!! Thanks
esseff said:
I had the same problem till I created two VPN connections. One for internal use (WiFi) and one for extenal use (3G).
The internal one uses the internal IP address of the VPN server and the external one uses the external IP address.
You have to sleect which connection you want to use before starting the connection depending on whether u r using WiFi or 3G.
Hope that makes sense. It works 4 me.
Click to expand...
Click to collapse
esseff, pardon my noobness but when you speak of "VPN server" is that referring to the desktop I am trying to remote connect to?
I have an ATT 8525 w/Black Satin Normal WM6 on the ATT network using MediaNet as my GPRS.
I can remote in from almost any open network via my laptop. Could it be that ATT blocks 3389? If so can I alter the port RDM uses to setup a connection?
are you able to remote connect PC to PC? (from outside of your current LAN)
if not ... its not your phone its your firewall... try disabling your firewall w/in your pc os and router.
would explain why you can connect using wifi if its part of your router and its set up as a "home network".
I'd bet if you googled this you'd find EVERYTHING you need to know.
Yes, I can connect just fine PC to PC outside the LAN. I have my custom listen port opened as required. The issue is definitely with the 8525 connection settings or the ATT service. I have trolled google pretty extensively, but have been unsuccessful in finding some quality info.
Hi,
I want to share my laptop internet connection through wifi but it is connected through proxy in my college. Can any one tell me how to do it? Normal adhoc connection is not working.
Thank you
adix149 said:
Hi,
I want to share my laptop internet connection through wifi but it is connected through proxy in my college. Can any one tell me how to do it? Normal adhoc connection is not working.
Thank you
Click to expand...
Click to collapse
I think what you meant is trying to use your Defy's as mobile hotspot to connect your laptop which currently setting to your college internet proxy...
In windows 7 it can auto established to a multiple network connections.
The only thing you need to do is setting your internet option connection to which network you want to connect..
Goto Control panel - network & internet - internet option - connections - Lan settings - proxy server - uncheck everything..
I hope I understand you right..