Have the o2 XDA IIs. Just got it yesterday actually. Playing around with it. I tried out a lot of things and they seem to work fine except for the internet on WIFI. Its working fine on GPRS.
I have manually configured the wifi connection with the WEP, IP address, gateway and DNS.
I open Internet explorer and its not working. it says THE PAGE YOU ARE LOOKING FOR CANNOT BE FOUND. When wifi is off, it connects to GPRS and it works fine.
Anyone else have this sort of a problem? I just came upon this site today. Read about the omega battery pack pro. I installed the trial version. Seems to be a good software. Anyone know if I can obtain it for free? The set cost me a lot already.
ok.. coming back to wifi. Anyone have any ideas how I can make it work?
check dns
if you can see network in batery pack pro check if wifi gives you a dns server and an ip
if it doenst you have to check you wifi config
Hi, I have the same problem too !
Mine is XDA II, no problem to surf net when hook-up to PC throught USB cable, but not with Wifi SD card. I check IP all normal.....any idea ?
how about dns?
do you check if there is one?
you can do that with batery pack pro
and you have to set network card to internet
check it please
How do you connect to the interent? There's a catch to that question because you have the option to choose "My ISP" or "My Work Network" in the Connection Properties. You should select "My Work Network" then tick the box where it says "This network connects to the internet". If you never want to connect via gprs cause it's so damn expensive, choose "My Work Network" for both internet access options.
Hi all, Thanks for response !
My Setting:
Connections > My Work Network > Advanced > Select Networks > My Work Network > Proxy Settings > Tick: The network connects to the Internet, UnTick: The network uses a proxy server to connect to the internet.
Configure Network Adapters > My network card connects to "The Internet"
Tick: SanDisk Wi-Fi SD Card > IP Address > Tick: Use server-assigned IP address, UnTick: Use specific IP address.
Hope to solve it.......Thanks !!
When configuring Activesync, you would choose which connection for it to use to sync with exchange server and in the WM5 I would pick My ISP but on the WM6 "Internet" is the only options in the drop down menu.
Shouldn't it be listing all avaiable connections you have added in the Connection settings?
Maybe a bug? or is there a setting where I select connection type for "Internet" on WM6?
Thanks
Bill
In the connections dialogue you select what My ISP (or whatever you use, i.e mine is 'O2') connects to, which is usually the internet.
When you set activesync to connect via the internet it will use ANY connection which does just that. So if you are connected via the USB to your pc it will connect to the internet through that. If you are disconnected from your PC it will use your GPRS instead.
I dont think it is a 'bug' really. Does your activesync work as desired?
mrvanx said:
In the connections dialogue you select what My ISP (or whatever you use, i.e mine is 'O2') connects to, which is usually the internet.
When you set activesync to connect via the internet it will use ANY connection which does just that. So if you are connected via the USB to your pc it will connect to the internet through that. If you are disconnected from your PC it will use your GPRS instead.
I dont think it is a 'bug' really. Does your activesync work as desired?
Click to expand...
Click to collapse
Yeah Activesync seem to be working fine but in WM5 it wouldn't work with connections that uses proxy and it would allow me to select a connection in the drop down menu that doesn't have proxy setting ie "My ISP"
Perhaps the new Activesync now works with proxy.
As far I can tell it's working fine.
Mine does not - I have to manually use activesync to get mail from the Exchange Server. Push does not seem to work. There is another thread on this here:http://forum.xda-developers.com/showthread.php?t=297781
It is really annoying me at the moment as I canot find a workaround.
It seems that activesync can find the GPRS when I do a manual Sync, but has a warning that i do not have a cellular internet connection. Odd. I originally used the Orange .cab files to set up the connections, I then deleted them and recreated the connection manually which made no difference.
Any ideas would be welcome!
I have a similar problem. I'm not sure if it's the same or not. Help would be appreciated...
When my Hermes is roaming everything in hunky-dory, GPRS, HSDPA, Push-Email... all is running smooth. BUT...
When I Activesync (I have "Allow wireless connection on device when connected to the desktop" unchecked - as advised in this thread), the hermes initially drops any wireless connections, then, instead of using the PC's broadband (as per WM5 & Activesync 4.2) to sync with Exchange it tries to dial up to GPRS again. Sync ultimately fails with error code 85020006. This webpage says the problem is "The Connection Manager could not find a path to the destination.
- OR -
Unable to connect. Verify your dialup or proxy settings are correct, and try again"
This is annoying as I have SPB Insight installed which I want to use the PC's connection to update all the channels, as well as sync with Exchange.
EDIT: I tried this before among other things and it didn't work but now it seems to be working OK. The only thing I can think that has fixed it is changing "This computer is connected to:" The Internet
well i also have WM 6 installed on my device and when i configured AS to sync with mail2web exchange server it stopped accessing the Internet when connected to the PC via USB/ AS.... whenever i try to access the Internet when the device is cradled the device opens the GPRS connection and connects to the net.... how do i get AS to connect to the net when cradled and not GPRS... and the exchange sync gives an error MSG 85020006...
someone please help me.... its really very frustrating not being able to connect to the net when connected via USB/ AS...
thank u
nahguam said:
I have a similar problem. I'm not sure if it's the same or not. Help would be appreciated...
When my Hermes is roaming everything in hunky-dory, GPRS, HSDPA, Push-Email... all is running smooth. BUT...
When I Activesync (I have "Allow wireless connection on device when connected to the desktop" unchecked - as advised in this thread), the hermes initially drops any wireless connections, then, instead of using the PC's broadband (as per WM5 & Activesync 4.2) to sync with Exchange it tries to dial up to GPRS again. Sync ultimately fails with error code 85020006. This webpage says the problem is "The Connection Manager could not find a path to the destination.
- OR -
Unable to connect. Verify your dialup or proxy settings are correct, and try again"
This is annoying as I have SPB Insight installed which I want to use the PC's connection to update all the channels, as well as sync with Exchange.
EDIT: I tried this before among other things and it didn't work but now it seems to be working OK. The only thing I can think that has fixed it is changing "This computer is connected to:" The Internet
Click to expand...
Click to collapse
This solved my problem....thank you so much!
Hi,
Since AS 4.2 came out I have problems to use USB Internet passthrough in Activesync, als AS 4.5 did not solve this problem. I googled around a lot and also searched in xda forums but everyone is giving other instructions, some say this, some say it the other way. It also does not depend on the rom, I had the same problem on the wizard and now also with my TyTN on wm5 and wm6 roms.
So my question is: How to enable USB internet passthrough on ActiveSync 4.5? At the moment my desktop activesync is set to "automatic" in the connection settings, and on my device under Settings->Connections->Connections->Advanced->Select Networks I have "Orange Internet" as the connection which connects to the internet (which has in the proxy settings "this network connects to the internet" enabled). and the work connection is "My ISP" which has no settings at all. I tried to add a new network connection but didn't even know which Modem I have to choose and so I gave this up.
I also tried to set my desktop activesync to either use "Work" or "Internet" instead of automatic but when I try to use Opera, Internet Explorer or any other program like downloading the weather data all programs say that the host or page cannot be found or report a network error.
Can anyone help with this, I'm really very desperate... Cause I also tried to find the correct settings for hours now, but without luck...
Thanks for any help with this subject.
marcelser said:
Hi,
Since AS 4.2 came out I have problems to use USB Internet passthrough in Activesync, als AS 4.5 did not solve this problem. I googled around a lot and also searched in xda forums but everyone is giving other instructions, some say this, some say it the other way. It also does not depend on the rom, I had the same problem on the wizard and now also with my TyTN on wm5 and wm6 roms.
So my question is: How to enable USB internet passthrough on ActiveSync 4.5? At the moment my desktop activesync is set to "automatic" in the connection settings, and on my device under Settings->Connections->Connections->Advanced->Select Networks I have "Orange Internet" as the connection which connects to the internet (which has in the proxy settings "this network connects to the internet" enabled). and the work connection is "My ISP" which has no settings at all. I tried to add a new network connection but didn't even know which Modem I have to choose and so I gave this up.
I also tried to set my desktop activesync to either use "Work" or "Internet" instead of automatic but when I try to use Opera, Internet Explorer or any other program like downloading the weather data all programs say that the host or page cannot be found or report a network error.
Can anyone help with this, I'm really very desperate... Cause I also tried to find the correct settings for hours now, but without luck...
Thanks for any help with this subject.
Click to expand...
Click to collapse
do you use a proxy server for this pass through connection? what activesync partnership do you have setup "Guest" or a Normal one...
First to be able to use passthrough you must be connected to your PC via USB and thus connected to active sync. Active Sync should be fully set-up.
First question;
Can you synchronize your data through Active Sync 4.5.
If yes. Try to tick all the items in the desktop active sync> connections settings. On the space "this computer is connected to" select automatic
second: Can your PC connect to the internet?
If yes open the PC Internet Explorer and try to browse, then, while connected at USB, open Pocket Internet Explorer in your mobile and try to browse. You should be connected to the internet then. Good Luck!!
If still you wouldnt connect there must be wrong on your Active Sync partnership set-up
Two more tips:
1. Start/Settings/Connections/USB to PC - untic
2. http://pdaphonehome.com/forums/552203-post22.html
no proxy
walshieau said:
do you use a proxy server for this pass through connection? what activesync partnership do you have setup "Guest" or a Normal one...
Click to expand...
Click to collapse
I don't use any proxy server for connecting to the internet, my PC is directly connected to a NAT Router, as well as my linux box and my girlfriends computer and all work perfect.
As for the activesync partnership, where do I see the type of my partnership or in other words, what is a "guest" partnership? The only thing I see is that my device is named "WM_marc1" and that activesync items sync perfectly but the internet passthrough won't work.
I hope you can give me further advice with this information. Thanks for you help
docles2002 said:
First to be able to use passthrough you must be connected to your PC via USB and thus connected to active sync. Active Sync should be fully set-up.
First question;
Can you synchronize your data through Active Sync 4.5.
If yes. Try to tick all the items in the desktop active sync> connections settings. On the space "this computer is connected to" select automatic
second: Can your PC connect to the internet?
If yes open the PC Internet Explorer and try to browse, then, while connected at USB, open Pocket Internet Explorer in your mobile and try to browse. You should be connected to the internet then. Good Luck!!
If still you wouldnt connect there must be wrong on your Active Sync partnership set-up
Click to expand...
Click to collapse
My data synchronizes perfectly through AS 4.5 and I have already checked all items in connection settings. Of course my computer is connected to the internet (see reply to walshieau) and honestly IE and pocket IE have nothing to do with internet passthrough, it's all about TCP/IP subnetting, bridging, tunnelling or whatever method AS 4.5 uses for internet passthrough.
Sorry if i am not explicit...but i hope this helps. For my wizard i remember i had to install a reg on the PC. It did some changes to the Active Sync registry.
The bad is that i don't have that reg
marcelser said:
Hi,
Since AS 4.2 came out I have problems to use USB Internet passthrough in Activesync, als AS 4.5 did not solve this problem. I googled around a lot and also searched in xda forums but everyone is giving other instructions, some say this, some say it the other way. It also does not depend on the rom, I had the same problem on the wizard and now also with my TyTN on wm5 and wm6 roms.
So my question is: How to enable USB internet passthrough on ActiveSync 4.5? At the moment my desktop activesync is set to "automatic" in the connection settings, and on my device under Settings->Connections->Connections->Advanced->Select Networks I have "Orange Internet" as the connection which connects to the internet (which has in the proxy settings "this network connects to the internet" enabled). and the work connection is "My ISP" which has no settings at all. I tried to add a new network connection but didn't even know which Modem I have to choose and so I gave this up.
I also tried to set my desktop activesync to either use "Work" or "Internet" instead of automatic but when I try to use Opera, Internet Explorer or any other program like downloading the weather data all programs say that the host or page cannot be found or report a network error.
Can anyone help with this, I'm really very desperate... Cause I also tried to find the correct settings for hours now, but without luck...
Thanks for any help with this subject.
Click to expand...
Click to collapse
hi, I am using wm6(LVSW series, black Series and now Official Dopod release) on my hermes, everytime I can successfully connect to the internet via activesync using whatever program like pie, opera, spb insight, weather update, WML etc.
what I have done is simply unchecked the 'enable advanced network functionality' under start -> settings -> connections ->USB to PC and then plug the usb cable to my pc.
I use activesync 4.5.
hope this help
ctrlaltdel said:
hi, I am using wm6(LVSW series, black Series and now Official Dopod release) on my hermes, everytime I can successfully connect to the internet via activesync using whatever program like pie, opera, spb insight, weather update, WML etc.
what I have done is simply unchecked the 'enable advanced network functionality' under start -> settings -> connections ->USB to PC and then plug the usb cable to my pc.
I use activesync 4.5.
hope this help
Click to expand...
Click to collapse
YES WORKS UNDER VISTA TOO
simply check the 'allow data connections on device when conneted to the pc' under connection settings and then plug the usb cable to pc.
Heres the Fix
I had the same problem and this reg key fixed it for me 100%
Download this file AND RENAME IT TO lspvalue.reg
the double click on the reg file on your PC
Jules
ZaJules said:
I had the same problem and this reg key fixed it for me 100%
Download this file AND RENAME IT TO lspvalue.reg
the double click on the reg file on your PC
Jules
Click to expand...
Click to collapse
That's the one i was talking about, thanks i was going to need it too
Ok followed the procedures. I think anyone of them works. Mine worked by changing on PC activesync to "this computer is connected to: The Internet". Nothing else worked. I had the reg hack from the time of my beloved Wizard!
go to:
start -> settings -> connections -> advanced -> select network
make sure that
"programs that automaticaly connect to the internetshould connect using"
"my work network" and not "my isp"
then go to
start -> settings -> connections -> usb to pc
and make sure to uncheck "enable advanced network functionality"
that should do it
regards
H.S.
hsalah72 said:
then go to
start -> settings -> connections -> usb to pc
and make sure to uncheck "enable advanced network functionality"
that should do it
regards
H.S.
Click to expand...
Click to collapse
on my hp 6828, it doesnt seem to have the usb to pc option/icon.
tried the first part selecting connect to work.
I'm stil haveing a problem. any ideas?
maymaymay said:
Two more tips:
1. Start/Settings/Connections/USB to PC - untic
Click to expand...
Click to collapse
This one works for my TP
Goshh... I love this board !!
Thank you very much, maymaymay
Still not working
Why can't someone come up with an ACTUAL solution to this?
When I connect my Tilt to the PC it automatically passes the internet connection through the PC. I did the registry fix and tried all four settings (0, 1, 10, 11) and still my data connection on the phone is overridden by the active sync desktop pass-through. I turned off the advanced networking option and still it goes through the PC. I even went through all the settings in active sync for "This computer is connected to" even though that doesn't even look like it would affect which connection my phone uses. This seems more like a setting within active sync on the phone more than anything.
I use my phone at work for chatting on yahoo IM (with Palringo) since my company network is filtered. I use a program called MyMobiler to transfer the phone display and controls to the PC so I can use my desktop keyboard for the chat program instead of my phone's keypad. Since the network is filtered the internet connection on my phone is filtered too since it's passed through the desktop when I active sync it to use MyMobiler. Sometimes Palringo will hold the connection even after I've connected to the desktop and sometimes it won't.
Bottom line here is can someone come up with an real working solution to this problem that a LOT of people are having?
HOW TO DISABLE DESKTOP PASSTHROUGH WHEN CONNECTING WITH ACTIVESYNC. Search that on google and here and all you will find are people saying "Yeah I have that problem too" or people telling how to connect WITH desktop passthrough.
I have a similar issue. I have my phone connected to my work PC to charge / sync, but all Internet connections attempted by the phone are being routed through my work network until I unplug the USB.
Naturally, that's very bad since all Internet traffic is logged by my work and many sources are blocked. I have an unlimited data plan on my phone. Why can't I stay connected to it when I'm hooked to ActiveSync?
I read someplace that Windows Mobile has an order of preference where connections are concerned. Probably hard line, then wi-fi, 3G and then EDGE. Surely there must be some way to modify this order of preference.
The thread is missunderstood...
The problem here is give to the PPC internet via usb... providede by a PC...
The solution that REG (that works for me EVER!!!).
And now other one provide internet to my PC via usb on phone account
With apologies, I'm not sure I understood what you said there.
But, some of us are actually trying to stop receiving internet by the USB.
I would like the phone to initiate a wireless 3G connection even when connected to the PC. But, thus far, all settings I've tried still cause my phone to attempt to access my business network here at my company.
Big no-no.
have you finally solved the problem?
If so just like to ask if you have change your homepage in ppc? which is
file://windows/default_0409.htm?
and have not run your network wizard? then maybe I have the solution here
Reg key
HKEY_LOCAL_MACHINE\Software\Microsoft\Internet Explorer/AboutURLs/
usually it is ( default value )
A.Blank value is res://webview.dll/blank.htm
B.Home_0409 value isfile://windows/default_0409.htm
C.version_0409value isfile://windows/default_0409.htm
if there is a new reg in that one try to delete that file again using a registry explorer ( depends on what you use to view the file)
turn it off for about 30 secs then soft reset... I hope this helps out
I'm not sure that addresses the issue, or mine at least. My phone disables HSDPA the moment I plug the USB cable into the phone and Active Sync takes over. It's before I even open a browser.
Not only does the phone start looking for Internet over the USB Active Sync connection, it looks for non browser related things like weather updates and sending mail to the gmail server.
Somewhere, it's coded to have an order of preference in what kind of connection it accesses. By default, it seems to look for any available land line connection, possibly wi-fi next, then 3G and then EDGE. I'd like to take the land line connection completely out of the equation.
IE does not work when HTC is connected with WIFI ?
Does anyone have the solution ?
HTC Hermes
ROM 3.54b Schap's
Radio 1.50.00.00
10 threads down.
Go to wifi settings, then network card and make sure that "network card" is set to connect to "the internet".
Go to connection settings and make sure that "my work" connection, on the proxy tab, the "this connects to the internet" should be ticked.
I have done that, but it doesn't work.
Disable your proxy when using wifi. You can find it In Programs > Proxy manager. Hope it helps! This is from Patcando2.
Found this reply in another thread. I was having the same problem and this solution solved it.
Thanks Patcando2.
Windows Mobile 6.1 IE on WiFi
Thanks so much for the answer regarding the proxy manager. I can't believe such simple instructions aren't readily available in any of the documentation for the phone or Windows Mobile.
I had tried everything with every other configuration for networking and connections but was unfamiliar with the Proxy Manager as my last Pocket PC didn't have or need it.
Regards,
Steven Kielkucki
Thanks, this worked for my LG Incite, too! You guys are great, keep up the good work.
Hi guys,
Having some trouble connecting my Orbit to the internet through wi-fi...
I set my desktop to share internet connection through wireless and have been surfing on my laptop via this for ages...
Now when I switch Wi-Fi on the orbit on, it finds the network, put my WEP key in and it connects... then when I go into IE and go to a page it says "Cannot connect with current connection settings. To change your connection settings click "settings"......."
When I click settings it just takes me to the page that says
"My Work Network
Add a new modem connection
Add a new vpn server connection
Set up my proxy server"
Can anyone help with what the heck I need to be doing to get the internet working?!?!
Cheers
GK
UPDATE:
Whilst I was typing the message (supposedly still connected through wi-fi to the internet) the Orbit beeped at me and message said
"Unable to obtain a server assigned IP address. Try again later or enter an IP address in Network Settings"
Could that be whats causing the problem and how can I fix it?
Cheers
M
Solved my own problem thanks to the BBC website...
What are the chances of this happening on the same night as I get my XDA and try to set up my wireless...
http://news.bbc.co.uk/1/hi/technology/7149931.stm
Lmao, so is everything working now ?