Hi everybody. Not yet bought such a device as I have first to understand wheter it is possible to install a Japanese windows. I need it to be able to read and write japanese characters and don't find a place where to find a device already equipped with such a software.
Also, does anyone know where an image of a japanese windows might be obtained ?
Thanks in advance to any one who will help.
Do you want to read/write Japanese, or for the entire OS to become Japanese?
If it's the former, you need the fonts containing Kanji, a set of registry entries to default fonts without unicode kanji chars to the Kanji fonts, and an IME that can do Kanji. A kanji dictionary is also useful.
If it's the latter, you need a Japanese ROM, and I doubt these devices have been released in Japan becauase of the different cell phone network protocols there.
More info on Fonts/IME/Dictionary here:
http://dialspace.dial.pipex.com/prod/dialspace/town/pipexdsl/o/aoou76/CEStuff/
So, on using the phone in Japan...
Thanks Andy, nice of you and, excellent and pertaining answer. Let me go straight to my problem. I have to go to Japan for business and hope to use this device as a phone and as an e-mailer machine. You've answered for Kanji Hiragana and so on. I know that Japan uses W-DCMA as a protocol. Does anyone knows if it is possible to place a japanese SIM into it to make it operative there ?
An alternative would be to connect it (via BlueTooth) to a rent japanese phone, just for the e-mail.
Any Japanese reading this forum might pls, help?
Thanks in advance
Japanese on the English OS
i am japanese guy, and have been used Wallby--Himalaya--Blue Angel--Mini,with japanese language(OS is english, but can write/read/encoding to JP)
and also now tring to be localized Magneto WM2005.
i am very famouse guy (i hope) of the Japan/China Localization of English PPC.
To use Jpanese on ENG OS, need Japan font, replacing wince.nls=encoding inbox and IE,also font registry files, and encoding registry.
follows are my web site to show how i am fighting to be localize.(Japanese)
Home page;
http://www.geocities.jp/asukal_trader/
the cab files automatic localaziation i made
http://www.geocities.jp/asukal_trader/Localize/localizecab.htm
Instrudction of localization by manualy
http://www.geocities.jp/asukal_trader/Localize/Howto.htm
Intrudction of japanese input soft free/share
http://www.geocities.jp/asukal_trader/Localize/JP_SIP.htm
The DL link sources for the localization by manualy
http://www.geocities.jp/asukal_trader/NLS.htm
Also my Blog to be shown my PDA life
http://asukal.seesaa.net
I think those links make you happy!
I was in Japan last year for 3 weeks holiday (fantastic!), but my XDAII certainly wasn't able to connect to anything GSM/GPRS like over there. It was still invaluable to have as a PDA because of the Kanji dictionary program.
I hired a J-Phone temporarily while I was out there, but I don't know whether there are Bluetooth enabled ones out there allow the XDA to use the phone as a data modem.
Asukal - interesting website, I must parctice my Japanese more!
andyclap said:
I was in Japan last year for 3 weeks holiday (fantastic!), but my XDAII certainly wasn't able to connect to anything GSM/GPRS like over there. It was still invaluable to have as a PDA because of the Kanji dictionary program.
I hired a J-Phone temporarily while I was out there, but I don't know whether there are Bluetooth enabled ones out there allow the XDA to use the phone as a data modem.
Asukal - interesting website, I must parctice my Japanese more!
Click to expand...
Click to collapse
Thanks!
Japan has no GSM, but has a W-CDMA, you can use W-CDMA phone with your country SIM card and W-CDMA/GSM dual Mobile Phone(such like a nokia 7600/6630). we have very few mobile Phone with Bluetooth in japan. so you had better bring your M Phone in japan.
while i am in japan,i use XdaO2 IIs+Nokia 7600 with china GSM SIM. it was not officail roaming (china Moble Co also dont know how to do), but it can be done. also Hong Kong SIM can.
if you wish to hire J-Phone<now they are Vodafon japan>, Nokia6630 and Sonny erricoson are available with Bluetooth. but those phone were sim locked. your own SIM will be rejected and must use J-Phone`s.
i am very await for the MDA-4 with W-CDMA will comming!
Thank you.
Thank you Andy. Thank you Asukal. You guys, have made me understand the matter. Now I understand that I have either to have an MDA IV (as soon as it is available) or have an MDA III plus a phone like a Nokia 6630 for when I am to Japan.
Thanks again, have a nice day.
Welcome to Japan
Mr,spinzolone>>>>
MDA IV, if it come with New OS WM2005, i can`t guarantee to enable Japanese encoding internet browsing and e-mail inbox .
In my test with Beta-WM2005,(also another chinese friend so) still cant do it currentry. but i hope it will be solved soon.
Asukal: One quick question - I'm having problems with my font-linking, notably "\". Do you have any idea what might be wrong?
I'm using XDAII, PPC2003, with the ttc font collections rather than individual files. I've checked your registry files and the linking information seem the same as mine.
Hints for Japan ...
Dear Asukal, so do you think that with a iPAQ MM2003(first or second edition) patched for displaying japanese characters, and a Nokia 6630 I'll be able to send/receive e-mail while in Japan?
And, for a matter of costs, would you suggest to buy a SIM in Japan rather than roaming from Japan to Italy?
Any other hint for a European guy?
Thanks again a lot. Domo arigato
Elio
Mr,andyclap> "\" will show on Jpanese Localized deveise as "Yen" mark.
following is the registry to make localize to JAPAN, i use.
EGEDIT4
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\International]
"ACP"=dword:000003a4
"LCID"=dword:00000411
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\International]
"Default_CodePage"=dword:000003a4
[HKEY_LOCAL_MACHINE\SYSTEM\GDI\GLYPHCACHE]
"Limit"=dword:00004000
[HKEY_CLASSES_ROOT\MIME\Database\Charset\x-sjis]
"AliasForCharset"="shift-jis"
[HKEY_CURRENT_USER\Keyboard Layout\Preload\1]
@="e0010411"
[HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000030]
"Ime"=dword:e0010411
"KM"=dword:0000c400
"VK"=dword:00000019
[HKEY_CURRENT_USER\Ime]
"FileName"=""
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Layouts\e0010411]
"Layout Text"="KBD e0010411"
"Ime File"=""
[HKEY_LOCAL_MACHINE\SYSTEM\GDI]
"FontLinkMethods"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\GDI\V1\SYSFNT]
"CS"=dword:00000080
"Wt"=dword:00000190
"Ht"=dword:fffffff4
"Nm"="tahoma"
[HKEY_CURRENT_USER\ControlPanel\Notifications\{A877D663-239C-47a7-9304-0D347F580408}]
"Wave"="lowbatt"
"Duration"=dword:00000000
"Options"=dword:00000000
"Default"="Battery Warning"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\FontLink\SkipTable]
"Tahoma"="005c,00a5,007e,0391-03c9,2026,2116,221a,25a0-25ff"
"Courier New"="005c"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\FontLink\SystemLink]
"Symbol"="\\Windows\\msgothic.ttc,MS PGothic"
"Times New Roman"="\\Windows\\msgothic.ttc,MS PGothic"
"Courier New"="\\Windows\\msgothic.ttc,MS PGothic"
"Arial"="\\Windows\\msgothic.ttc,MS PGothic"
"Tahoma"="\\Windows\\msgothic.ttc,MS PGothic"
[HKEY_CURRENT_USER\ControlPanel\Sip]
"MenuBarHeight"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\GWE\Menu]
"BarLMrg"=dword:00000006
"BarRMrg"=dword:00000006
"BarTMrg"=dword:00000002
"EatDismissEvent"=dword:00000001
"Overlap"=dword:00000060
[HKEY_LOCAL_MACHINE\SYSTEM\GWE\Menu\BarFnt]
"Wt"=dword:00000190
"Ht"=dword:fffffff4
"Nm"="Tahoma"
"HtInPts"=dword:00000001
"It"=dword:00000000
"CS"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\GWE\Menu\PopFnt]
"Wt"=dword:00000190
"Ht"=dword:fffffff4
"Nm"="Tahoma"
"HtInPts"=dword:00000001
"It"=dword:00000000
"CS"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\GDI\SYSFNT]
"Nm"="Tahoma"
"HtInPts"=dword:00000001
"It"=dword:00000000
"CS"=dword:00000000
"Ht"=dword:fffffff4
"Wt"=dword:00000190
Simply you can down load "Lets Japan.CAB" 4.5MB from follows, and tap it on the device, "Yes" to all if you asked. MSGothic.ttc and wince.nls, and also regostry will be installed automaticaly.
http://www.asukal.jp/Asukal Lets Japan.cab
Re: Hints for Japan ...
spinzolone said:
Dear Asukal, so do you think that with a iPAQ MM2003(first or second edition) patched for displaying japanese characters, and a Nokia 6630 I'll be able to send/receive e-mail while in Japan?
And, for a matter of costs, would you suggest to buy a SIM in Japan rather than roaming from Japan to Italy?
Any other hint for a European guy?
Thanks again a lot. Domo arigato
Elio
Click to expand...
Click to collapse
i e-mailed u last night about Japanese input Atok, also i made cab files of another Japanese SIP "POBOX" which has predictive input system.
Just tap this CAB to install,Reginal setting must be Japanese when you install and use this.(also only can use after Localize to Japan)
down load from here
http://www.asukal.jp/JapanSIP.cab
about SIM in Japan, Japan has no prepaid SIM card. you must make conract for a year! it was cost and troublesome for forginer.(ask some japanese friend to buy his name, US$100 at the first and US$30 per every mounth. One year contract.
So i suggest use your italy SIM.
Thanks a lot Asukal, it was a joy to me to receive your quick reply yesterday evening. I've followed you suggestions and now I have a HP hx2410 - Windows Mobile 2003 se v. 4.21 perfectly "japanized".
Showed it to the Japanese manager who's going to use it and he was very satisfied.
P.S. We were told from a japanese guy that, when we go to Japa we can make contract with DOCOMO or VODAFONE. Particularly with DOCOMO, asking for a contrat FOMA we should receive a SIM card.
You know, it is not that I want to have SIM cards. To me it's enough that my phone NOKIA 6630 works there. But I'm to send a manager there and I'd better instruct him on what to do to make connections in Japan.
If you could confirm that, no matter which contract (with or without SIM card), we can work, this would bring a smile on our faces.
Have a nice day
Elio
HELP!
HELP fellas, I am the other way around! I bought a Chinese O2 XdaIIs and i can't read chinese (but only chinese available here for sale). I thought I can easily change it to english but i guess i won't be here if that's the case. Can anyone help me out? I'm a decent PC guy but never worked with PPCs..HELP!!!!
C4
Re: HELP!
c4Lvin said:
HELP fellas, I am the other way around! I bought a Chinese O2 XdaIIs and i can't read chinese (but only chinese available here for sale). I thought I can easily change it to english but i guess i won't be here if that's the case. Can anyone help me out? I'm a decent PC guy but never worked with PPCs..HELP!!!!
C4
Click to expand...
Click to collapse
Many Kinds of English ROM were uploaded to XdaO2-Developers.com,
You can download and write engish rom on your chinese rom.
You can srech relative thread about that(for link of DL, or how to write rom)
If i had time, i can find for you but now i am on business travel now, no time to do.
Or you sale it and buy again! because if you re-write rom, no more guarantte by devise vender.
Re: Hints for Japan ...
Asukal said:
spinzolone said:
Dear Asukal, so do you think that with a iPAQ MM2003(first or second edition) patched for displaying japanese characters, and a Nokia 6630 I'll be able to send/receive e-mail while in Japan?
And, for a matter of costs, would you suggest to buy a SIM in Japan rather than roaming from Japan to Italy?
Any other hint for a European guy?
Thanks again a lot. Domo arigato
Elio
Click to expand...
Click to collapse
i e-mailed u last night about Japanese input Atok, also i made cab files of another Japanese SIP "POBOX" which has predictive input system.
Just tap this CAB to install,Reginal setting must be Japanese when you install and use this.(also only can use after Localize to Japan)
down load from here
http://www.asukal.jp/JapanSIP.cab
about SIM in Japan, Japan has no prepaid SIM card. you must make conract for a year! it was cost and troublesome for forginer.(ask some japanese friend to buy his name, US$100 at the first and US$30 per every mounth. One year contract.
So i suggest use your italy SIM.
Click to expand...
Click to collapse
Asukal-san,
Would you mind send "Atok" to me too? I'm using iPAQ 2210. I want to use japanese in my PDA becoz I'm learning japanese now. I'm looking for a better Japanese SIP. I'd used Atok in my Sony Clie. Its quite good. And Decuma Japnese is the other great Japanese SIP.
Anyway, Thx Asukal-san provied us very useful information about Japanese in PDA.
Shinji
Morning!
I send you a private message.
one of link patch of atok for WM2003 was wrong.
http://www.asukal.jp/Atok_2003_patch.zip is right one.
other japanese localize cab files i made,can downlaod from here
http://www.geocities.jp/asukal_trader/Localize/localizecab.htm
some SIP for CHinese support to Japanese input like follows
http://www.geocities.jp/asukal_trader/Localize/Multi_SIP.htm
Also new SIP soft like a T9 chinese of GSM mobile ,called Plum SIP for simple chinese, now i made Japanese option for that. and they will provie.
this is very nice! and i love it.(but not for Traditional chinese)
but japanese DIC for Plum SIP is not perfect now and we make perfect dictionary for that.
pls see my Blog!!
http://asukal.seesaa.net/article/3893465.html
The japaese set for PlumSIP is from
http://www.new-e.net/forum/forum_posts.asp?TID=225&PN=1
(SATO=my another name)
pls visit my blog any time about PDA/GSM/and china life(japanese only)
http://asukal.seesaa.net
also home page for the PDA about PDA
http://www.geocities.jp/asukal_trader
Asukal said:
Morning!
I send you a private message.
one of link patch of atok for WM2003 was wrong.
http://www.asukal.jp/Atok_2003_patch.zip is right one.
other japanese localize cab files i made,can downlaod from here
http://www.geocities.jp/asukal_trader/Localize/localizecab.htm
some SIP for CHinese support to Japanese input like follows
http://www.geocities.jp/asukal_trader/Localize/Multi_SIP.htm
Also new SIP soft like a T9 chinese of GSM mobile ,called Plum SIP for simple chinese, now i made Japanese option for that. and they will provie.
this is very nice! and i love it.(but not for Traditional chinese)
but japanese DIC for Plum SIP is not perfect now and we make perfect dictionary for that.
pls see my Blog!!
http://asukal.seesaa.net/article/3893465.html
The japaese set for PlumSIP is from
http://www.new-e.net/forum/forum_posts.asp?TID=225&PN=1
(SATO=my another name)
pls visit my blog any time about PDA/GSM/and china life(japanese only)
http://asukal.seesaa.net
also home page for the PDA about PDA
http://www.geocities.jp/asukal_trader
Click to expand...
Click to collapse
Asukal-san,
Thx your support!!! You are really nice for me ^o^
I have other problem in localize. I'm using english iPAQ 2210. I need to use traditional chinese and japanese. I found your web site have simplified chinese + japanese localize. Would you kindly make a traditional chinese version??
Arigarou!!
Shinji
Dou itashimasite!
Any way,
if used my osurces to make it, already traditional chinese have been done with Simple chinese and Japanese together.
Mybe you are missing to input soft ware for the Traditinal Chinese,right?
You can yuse Monstar SIP(only SIP) or some other input system.
http://www.hi-pda.com/forum/viewthread.php?tid=215892&sid=pzcAoc
you can download Hand writing soft .
You also see for this thread.
http://forum.xda-developers.com/viewtopic.php?p=120453#120453
Asukal said:
Dou itashimasite!
Any way,
if used my osurces to make it, already traditional chinese have been done with Simple chinese and Japanese together.
Mybe you are missing to input soft ware for the Traditinal Chinese,right?
You can yuse Monstar SIP(only SIP) or some other input system.
http://www.hi-pda.com/forum/viewthread.php?tid=215892&sid=pzcAoc
you can download Hand writing soft .
You also see for this thread.
http://forum.xda-developers.com/viewtopic.php?p=120453#120453
Click to expand...
Click to collapse
Asukal-san,
Would u mind tell me which file already have Tradition Chinese and Japanese? Is it Asukal e-chinaV3 or Asukal e-chinaV+?? Pls put the direct link let me download it ok? I already installed SIP from Monstart and PenPower. Please advice.
Shinji
Hi to all !When will be planned the support to use the new media SD HC 8Gb ??I think that must be only write a driver software and no need to change nothing in hardware parts.So, hopefully wish to know if just exists an updated software driver in order to read and write these media.Ask to some gurus how to walkaroud Thanks very much
probably never. different HW not only drivers.here is at least one thread about it
WHY DONT YOU USE SEARCH BUTTON !!!
or use http://forum.xda-developers.com/showthread.php?t=298893
phsnake said:
probably never. different HW not only drivers.here is at least one thread about it
WHY DONT YOU USE SEARCH BUTTON !!!
or use http://forum.xda-developers.com/showthread.php?t=298893
Click to expand...
Click to collapse
Sorry ! believe in me, I've used the search function in order to find SD HC topics before to post this one, but didn't success ! Maybe I am silly ....Please, can you post the link to it.Thanks vey much
SD HC Drivers...
How about This..?, and Where is the drivers...?
http://www.bsquare.com/about/story.asp?PressID=451
ajong: At first imagine, try to make from cd-rom a working DVD-ROM (or from petrol engine make diesel one) - its simply not possible. Its different HW. Drivers U mentioned are for WM and CE but only and only for devices that have SDHC hardware
and links for zugu:
http://forum.xda-developers.com/showthread.php?t=275706&highlight=sdhc
http://forum.xda-developers.com/showthread.php?t=296585&highlight=sdhc
http://forum.xda-developers.com/showthread.php?t=291443&highlight=sdhc
http://forum.xda-developers.com/showthread.php?t=291200&highlight=sdhc
i searched only within Uni-subforums. try use that button next time(i put into search window "sdhc"
Thanks for reply !
I'm going to read these !
Meanwhile ....
I'm agree in the techology differences between Cd and DVD, here there're differences both software and hardware ! Think just to the laser that should read a different substrates so need a different lenght and frequency. But IMHO, this is not the case between SD standard and SDHC.
At a first sight, these looks analogue and pin to pin compilant, so, is only the firmware's reader/writer of the drive that "understand " the different and more capacity media and treat it it the right mode....
Beside this, I think, WM5/6 SD drive too must be "re-touched" in order to recognize this new format.
This, always IMHO, isn't a hard task and must be seen if the brands really are interested to sell more pieces of new SD HC media pushing the support to previous age devices.
Anyway, will hope some developer will write a kind of "Hack" to implement this feature on devices with 2nd generation SD card drivers
Hi all,this is my first post.
I wanted to know if anyone has multilanguage dictionaries (speaking or non speaking)
I am always on the move to various places and others must be too. I have managed to find a chinese to english speaking software on this site, but no others.
If anyone has i would kindly request for anyone to post the apps please please please
The ones i am looking for are:
Italian
French
Spanish
German
Portugese
And any others anyone has
This would make my year and make my artemis the best mobile phone and tool i have ever owned!
GO Artemis!
Also
Also
Korean,
Taiwanese
would be very nice, there is no one here with this type of programs?
someguy1015 said:
Hi all,this is my first post.
I wanted to know if anyone has multilanguage dictionaries (speaking or non speaking)
I am always on the move to various places and others must be too. I have managed to find a chinese to english speaking software on this site, but no others.
If anyone has i would kindly request for anyone to post the apps please please please
The ones i am looking for are:
Italian
French
Spanish
German
Portugese
And any others anyone has
This would make my year and make my artemis the best mobile phone and tool i have ever owned!
GO Artemis!
Click to expand...
Click to collapse
http://www.slovoed.com/. the best.
thanks
i just checked out the link and look good!
il report back wen i get more info
I had a look at the site, its really good, has all the dictionaries i will ever need, the only problem is that you must pay for them
Gave me a good starting point on my search
Thanks for the link
i am looking for a korean, chinese traditional language pack that allows me to read and or write. on my wm6 device
I am also very interested in this. Both Korean and Trad. Chinese!
Does anyone have this?
I only know one, but it works fine.
Diopen by Diotek.
http://www.diotek.co.kr/eng/product/product_wce6.asp
Thanks, I'm going to try this one.
I've heard about the DioPen, but never actually tried. This time, I'm going to see if it will make a difference for me.
Thanks again!
I want to English language pack who help me! My PPC is RoverPC N7 made in Russian!
any confirmation of it working??
The diopen works very good. But it gives u serval days to try out. If you pay then its good, but if you dont, itll just give you whole buncha messages telling you to register.
But I would recommend it. I was trying to find something for free but havent found one yet.
can we like download a korean font like (like windows ttf.. whateva file it is for winmo..) and put it into the font folder?
its strange cuz i have a onmia and japanese and chinese works already
so i dont why you guys need chinese on wm6
but i would love to have a free way to get korean
cuz i do alots of multimedia titled in korean.. and boxes simply dont work
I want to have Roverpc N7 Rom
I want to have Roverpc N7 Rom! Help me! Thanks
Korean Fonts
vanilla_star_8 said:
can we like download a korean font like (like windows ttf.. whateva file it is for winmo..) and put it into the font folder?
its strange cuz i have a onmia and japanese and chinese works already
so i dont why you guys need chinese on wm6
but i would love to have a free way to get korean
cuz i do alots of multimedia titled in korean.. and boxes simply dont work
Click to expand...
Click to collapse
Here you can find some Korean fonts.
http://static.campaign.naver.com/nfs1/file/2008/11/hangeul2715/NanumFont_TTF.zip
It has 2 Pairs of 2 fonts inside.
Smaller pair is sans serif(NanumGothic & NanumGothic Bold),
the other is serif one. (NanumMyeongjo & NanumMyeongjo Bold)
They're released by "Naver", the largest web portal in Korea, on OFL 1.1 License.
You can use them for free.
Ah, you may need fixed font too.
Try the link below for fixed fonts.
http://dev.naver.com/frs/download.php/274/NanumGothicCoding-1.65.zip